Hey guys i just bought a mogul on ebay and had it flashed to metro pcs, the internet, and gps work fine, i just cant get it send out mms like many of ur phones can, i dont have sprint picture mail, because i have metro service.
ANY HELP WILL BE GREATLY APPERICATED!!!!!
Did you install Arcsoft? If you did not, you might want to find a copy of it to intall on your phone.
Once you do, follow the directions below as a guideline.
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Hope this helps nobale Metro PCS cousin...8)
*P.S.-- You might also want to find the Titan MMS fix CAB by CRwinger to help keep your MMS working properly. The reason is that when you open PIE it creates a registry key that will stop you from send/recieving MMS. The CAB file will automatically delete that file by pressing the messaging hard button on the top left of your Mogul.
Other alternative is not to use PIE and just use Opera.
PM me if you need any help, I'm with Cricket so we are almost in the same boat. 8)
mougl flashed to metro, mms problems
i'm really not smart when it comes to computers and pda, what is a pie and what is opera?
I'm pretty sure that PIE is something internet explorer. Opera is a mobile web browser. Probably one of the best since you can get youtube
mogul flash to metro, mms problem
ok i've located arcsoft mms 5.0.70.24, which on this forum, one do i download because i see beta and several other versions.
I use 5.0.31.19 myself. Any version after that or a beta is fine really. Its a trial and error of how well the software version you have works like you want it to.
Just DL anyone of them.
*Important--If anything back-up your phone just incase you need to do a hard reset. Use a program called PimBackup...its free.
As paintballinfl said:
PIE=Pocket Internet Explorer
Opera= A new browser for PDA's to view websites as if you are actually at your desktop.
mogul flashed to metro, problem with mms.
thanks, i had downloaded a older version, how do i delete the older program completely? i removed it from my phone but, what's a registry edit? and how do i do that before installing the new arcsoft?
You need to find phmReg Edit and use that program to do your registry edits...its free just google it.
Also if you already have a version of arcsoft installed use the guide to get MMS working for you on Metro PCS. If that version doesn't work for you do the advised below.
*If you want to change the version of arcsoft it is best to start from scratch and hard reset the device. Thats why i suggested you to do a back-up your phone. Also if a hard reset is needed please be careful because it will erase everything on the phone except the SD card.
So it goes like this:
install phmReg Edit-->install Arcsoft-->follow steps in guide
mogul flashed to metro pcs, mms problem.
THANK YOU GUYS... i'm able to send and receive picture and video mail, i just gotta get the titian cab fix or install opera, to keep it up.. what's the best opera version to install?
There are many builds out there but Opera build 2392 is good...seems to make it the default browser instead of PIE.
For example: When clicking on a link in a text message, Opera will open instead of PIE.
The Titan MMS fix by CRwinger I believe you might be able to find on PPCgeeks.
mogul flashed to metropcs, mms problems
Is it the mms cab fix for cricket? because i found that one, it was a choice between that one that the vougue fix. and if i choose the cricket fix will i have to redo all the setting back to metropcs? any link to the titian mms fix cab would be appreciated greatly!!! THANKS
hey where can i find the right one Install Arcsoft MMS version 5.0.70.24 for metro because it has different type of them like verzion and alltell etc.. which one is the best.....please help me
Related
OK, I've had the i-mate JASJAM ROM installed on my TyTN for a little more than 24 hours. As you probably know, this device was just released this past week, much later than the TyTN. The ROM build seems to be signficantly better based on speed and maturity of the drivers. I have now installed the 2GB microSD card all the software I was using before, including...
1. SPB Pocket Plus
2. WorldMate Pro
3. Verichat
4. PIE Plus
5. Virtual Earth Mobile
6. TCPMP
7. SlingPlayer Mobile
It would seem that i-mate has fixed the issues I was having with the audio/video drivers. When using SlingPlayer Mobile with the original TyTN ROM, the stream would play successfully for a minute or so and then begin to stutter badly whenever I got an email or the device did anything else, which I believe was due to the audio driver. With the i-mate ROM, the issue is completely gone. I can leave SlingPlayer Mobile open indefinitely without issue. Additionally, I find the device significantly more responsive. While it is still slightly slow to turn on from standby sometimes, switching between applications and the overall responsiveness is much better. Now, whenever I press the envelope button, it switches to Outlook instantly while before there was a definite lag. Additionally, I'm getting significantly fewer momentary system hangs and the keyboard seems a bit more responsive, with very few skipped keystrokes. Lastly, battery life seems modestly better.
You can get the ROM over at xda-developers.com, but be sure to read carefully about installation. To get MMS properly installed again, you need to install that CAB from the original TyTN extended ROM.
That being said, I still can't get MMS to work through Cingular
The Cingular MMS Server Settings are:
Server Name: Cingular MMSC
Gateway: 66.209.11.61
Port:9201
Server Address: http://mmsc.cingular.com
Sending Size Limitation: 100K
Wap Version: Wap 1.2
I use:
# Server Name: Cingular MMS
# Gateway: wireless.cingular.com
# Port number: 80
# Server address: http://mmsc.cingular.com
# Connect via: MEdia Net
# Sending size limitation: 300k
# WAP Version: WAP 2.0
This is right from cingulars support page for use with the wizard. I have tested this on the TyTn and it does work.
OK, here's my problem. I'm using the isp.cingular APN to connect via the following settings...
Access point name: isp.cingular
Username: [email protected] (case sensitive)
Password: ZXY203DC9K0402 (case sensitive)
Believe it or not, I can not get the wap.cingular APN to connect for some reason! Do you have to be using the wap.cingular APN for MMS to work?
Thanks!
Don't know why dont you try these settings, test MMS, then we'll see from there.
Configuring the Cingular 8125 for Pocket Outlook e-mail and/or Wi-Fi access:
1. From the "Start" menu select Settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Tap the Connections tab, select the Connections icon.
3. Select the Advanced Tab.
4. Tap Select Networks.
5. Select My ISP from the dropdown and tap Edit.
6. With Cingular GPRS selected tap Edit.
7. Verify the following setting and press Next:
* Enter a name for the connection: Cingular GPRS
* Select a modem:Cellular Line (GPRS)
8. In the "Access point name" field enter wap.cingular and select Next.
9. Verify the following profile settings then tap Advanced:
* Username: [email protected]
* Password: CINGULAR1
* Domain: Blank
Verify the following settings and tap ok:
10.
* Use server assigned IP address: Selected
* Use specific IP address: Unselected
* Use software compression: Unchecked
* Use IP header compression: Checked
11. Tap Finish.
12. Tap Ok.
13. Attempt an internet connection.
If problem persists, please contact Cingular Customer Care.
NOTE:
APN: Access Point Name
Hey people, If i did install this new ROM onto my TyTN (removing the origional HTC version) what things would i need to do to ensure the TyTN is working just as it was before the new rom (3rd party apps and things like MMS) ???
What are the benefits of the iMate JASJAM ROM as compared to the original HTM TyTN ROM?
-JoKer
Just to add, ive began using the imate ROM and im experiencing MMS problems with O2 UK also..... update soon when ive tested further
...it seems that having installed the .cabs from the HTC ext rom it messed up MMS?! I reinstalled the imate ext rom by copying the contents from the wiki page in this file to the unlocked ext rom folder, then running the autorun file. It once again prompted for my carrier (to which i selected O2 UK contract) ....and (lol) again it froze when installing the IMEI restricted cabs.....a soft reset cured this. Now testing MMS and its working correctly.
(wiki page updated to warn of this effect)
Wifi problems after installing the JasJam ROM on a TyTN
I agree with the first entry on this thread that the imat eROM seems to perform better than the HTC version, however I do not seem to be able to get the WIFI to connect.
The Comm Manager shows it switched on but when you go to WIFI Settings, the screen does not show any settings and it is not possible to refresh a netwrok list to force a search.
Does anyone have any ideas? Is this an Extended ROM install that I missed?
Thanks
Mike
MMS a definite issue
I upgraded my TyTN to the i-mate ROM today after extensive research on line to see the effects of a move like this. It all worked fairly well and I agree with the original post that the i-mate ROM seems to improve performance and overall 'feel' to the device but I hit the MMS problems same as everybody else, despite trying to use both the i-mate MMS cab file and the HTC MMS cab file (and the MMS worked prior to flashing). I am now putting the TyTN ROM back to see if I screwed up somewhere along the line and maybe start again. I have seen advice saying use the HTC cab and advice saying use the i-mate EXT ROM in it's entirety so not sure where to go next.
(one thing I did do was to run the i-mate MMS cab prior to running the HTC MMS cab without a hard reset in between so this may have played a part)
Will keep you all posted....
Okay, the HTC ROM is back in place and MMS working fine - same connections settings etc. so there is def a compatibility prob with the JASJAM ROM on the TyTN. BUT..... having put the HTC ROM back the performance really, really does suck so I reckon I am going back to the i-mate option and will screw around with the MMS some more. If I get a definitive answer I will post here.
Finally.....
Ok, it turns out that I am something of an idiot as every time I tried to test the MMS I was typing in the connection settings incorrectly (one of those hand eye things, or the lack of!)......
In summary the JASJAM ROM works superbly on the TyTN device. There are one or two apps that will not run due to vendor locking (as most of you will already know) but on the whole it works perfectly.
To set the record straight (after all of you have looked at my recent posts and despaired) I have put together a custom EXTROM package that will install the necessary onto your device after you have flashed the JASJAM ROM onto it. In order to use it you need to flash the ROM and then soft reset just before the device runs the EXTROM (when it says 'Customizing in 3 seconds') and then unlock your EXTROM (see the wiki for details). Once you have unlocked your EXTROM put the contents of the zipfile into it and either run the Autorun exe or perform a hard reset (I prefer the Autorun option but it is up to you).
I HAVE tested this but only once or twice so pls use it at your own risk. On one of the occasions the MMS was not installed correctly so this was resloved by running the MMS CAB file from the EXTROM.
Daryan - good work
what cab files are included in your attachment?
I have had a lot of trouble with the MMS settings myself
I installed the relevant MMS cab file and it worked ok but on a soft reset the settings had gone!!
I left it overnight last night with the mms settings installed and when I came to it this morning, they remained after a soft reset!
I did a hard reset and reinstalled the MMS settings via the cab file and again they had gone after a soft reset!
For a final time, I did hard reset, reinstalled MMS cab, left for about 20mins, did soft reset and the mms settings remained.
Elsewhere peple on other devices have mentioned the need for the mms settings taking several minutes to be written to device memory. This appears to be true with my experiences with the tytn mms cab file.
daddyo said:
Daryan - good work
what cab files are included in your attachment?
Click to expand...
Click to collapse
The only cab files that are present are (and some of this is general presumption rather than accurate knowledge) the imate generic stuff such as audio / video drivers etc., the smartdialer, vendor specifics and the MMS install (expand the zip file for specifics)
daddyo said:
I have had a lot of trouble with the MMS settings myself
I installed the relevant MMS cab file and it worked ok but on a soft reset the settings had gone!!
I left it overnight last night with the mms settings installed and when I came to it this morning, they remained after a soft reset!
I did a hard reset and reinstalled the MMS settings via the cab file and again they had gone after a soft reset!
For a final time, I did hard reset, reinstalled MMS cab, left for about 20mins, did soft reset and the mms settings remained.
Elsewhere peple on other devices have mentioned the need for the mms settings taking several minutes to be written to device memory. This appears to be true with my experiences with the tytn mms cab file.
Click to expand...
Click to collapse
This is not something that I experienced so can't comment but what I can say is that if you let the standard JASJAM EXTROM install after a flash or hard reset then the MMS feature is not installed straight away. You can get it to work by running the MMS CAB from the extended rom but this also allows the vendor locked cab files to attempt to run and this is an unknown variable. I recommend perform a fresh install (or hard reset) and stopping the EXTROM running by performing a soft reset after initial configuration (see above). Doing it this way seemed to go well.
This is very interesting results! I still haven't got a Vario II yet, but its something I will definitly be pestering my mum for, for a long time lol.
Anyway...
1. I see you use TCPMP, is there a good improvement in playback on this ROM ?
2. What version of the JASJAM ROM is this ?
3. Does the device freeze due to recharging like reported alot ?
4. Lastly... Does the normal stuff work.. Wireless, Bluetooth, Calling, etc...
Thanks v.much in advance!
gmatharu12 said:
This is very interesting results! I still haven't got a Vario II yet, but its something I will definitly be pestering my mum for, for a long time lol.
Anyway...
1. I see you use TCPMP, is there a good improvement in playback on this ROM ?
2. What version of the JASJAM ROM is this ?
3. Does the device freeze due to recharging like reported alot ?
4. Lastly... Does the normal stuff work.. Wireless, Bluetooth, Calling, etc...
Thanks v.much in advance!
Click to expand...
Click to collapse
Interestingly, I haven't had a chance to test the playback much even tho this is main reason I looked into switching the ROM! When I get a chance to play I'll let you know.
It is a cut down from version 1.18.255.3 07/22/06 (EXT ROM 1.18.255.106) which is the latest WWE version as far as I could tell
The answer to 3 is a no, not that I can tell at the moment.
The 'normal' stuff is all fine. I did quite a lot of research before moving to this ROM and the only probs I found mentioned were MMS (which I spoke about above) and WLAN which I have found to be working fine.
Thats great! Thanks!
Cool and let us all know how TCPMP does when your free, much appreciated!
I am using the Cingular 8525 and to avoid having Cingular junk installed after a hard-reset, I soft-reset the device after a successful hard reset. I.e. when the "installing in 3 seconds" notice shows up.
However, now that all the Cingular installation files are removed, I no longer have any of these:
- MMS Shortcut
- Smart Dialing in Phone app: this is the one that allows you to type if the name via the keypad (much like T9) and have the names listed
I have tried to install the files manually from the Cingular 1.34 ExtROM compressed file hosted in XDA Developer FTP site, but to no avail.
The ExtROM contains the following, and only the bold ones are the ones that I try to install to bring the above functionalities:
CAB: \Extended_ROM\MT_PC_Hermes_GenericLight_REG_060609.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\C_Cingular_GoodEmail_081606.sa.CAB
CAB: \Extended_ROM\C_getmail.ppc2005(HTC8100).ARMV4Rel.cingular.CAB
CAB: \Extended_ROM\C_HSDPA_Wirelss_Modem_Stall.cab
CAB: \Extended_ROM\C_Hermes_MobiTV.CAB
CAB: \Extended_ROM\C_GetTeleNav.CAB
CAB: \Extended_ROM\T_mm1lib_DLL.CAB
CAB: \Extended_ROM\PP_PIE_Default.CAB
CAB: \Extended_ROM\SMS_Setting_07Jun06.CAB
Please help. If I can't get the MMS shortcut and Smart Dialing, then there is no point in upgrading ROM since I'll be crippling the device to certain degree because it will not have the above functions.
OK, I am getting extremely frustated now. All I want is to get the MMS Shortcut and Smartdial on my Cingular 1.34 ROM.
I have installed the following (taken straight from the Cingular 1.34 ExtROM):
T_mm1lib_DLL.CAB
ShortString_Keypad_XML.CAB
MT_Shortcut-MMS-Hermes.CAB
MT_PC_Hermes_GenericLight_REG_060609.CAB (Smart Dialing)
I got SmartDialin to work. But NO MMS shortcut whatsoever! I installed the 1st three CAB above to get the MMS shortcut for 5 times in different order soft reset after EACH install, and NO MMS shortcut.
Those who have upgraded to the Cingular 1.34 and bypass the initial customization (soft reset after the 1st hard reset), please let me know how did you get the MMS Shortcut back. I assume there will be at least 20-30 people who have done this before.
No one knows how to fix the MMS shortcut for the CIngular 1.34 ROM? I guess no one is using Cingular ROM, then...
BTW, just FYI, any modification to the messaging program for some reason will get removed again, just like the MMS shortcut. For example, I installed Cingular XPress Mail (push email client) and the "Inbox" created by this application DISAPPEARED from Messaging application after 2 soft reset.
It looks like that Cingular and HTC have found a way to stop hacker from modifying the Extended ROM.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Download one and install the cabs you need.
lanwarrior said:
No one knows how to fix the MMS shortcut for the CIngular 1.34 ROM? I guess no one is using Cingular ROM, then...
BTW, just FYI, any modification to the messaging program for some reason will get removed again, just like the MMS shortcut. For example, I installed Cingular XPress Mail (push email client) and the "Inbox" created by this application DISAPPEARED from Messaging application after 2 soft reset.
It looks like that Cingular and HTC have found a way to stop hacker from modifying the Extended ROM.
Click to expand...
Click to collapse
I found that some of the CABs in the extended rom will not install if you try to install them manually, no matter how many times you run them. So, what I did was unlock my extended rom and just deleted the stuff I didn't want installed, then did a hard reset after that. Worked fine. (Personally, I wanted everything BUT MMS, but I'm sure if you delete the opposite of what I did, it'll work just as well)
sn00x said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Download one and install the cabs you need.
Click to expand...
Click to collapse
I did that. As a matter of fact, I used the ExtROM mount cab to access the cabs directly.
rassah said:
I found that some of the CABs in the extended rom will not install if you try to install them manually, no matter how many times you run them. So, what I did was unlock my extended rom and just deleted the stuff I didn't want installed, then did a hard reset after that. Worked fine. (Personally, I wanted everything BUT MMS, but I'm sure if you delete the opposite of what I did, it'll work just as well)
Click to expand...
Click to collapse
That's interesting to know! I think it affects mostly on the Messaging application, since it also make Email accounts disappear, not just MMS.
If you don't mind, can you let me know the following:
1) Which .CAB file did you leave (not delete)? I assume they are the following:
a. MMS Shortcut
- T_mm1lib_DLL.CAB
- MT_Shortcut-MMS-Hermes.CAB
b. Smart Dialing
- ShortString_Keypad_XML.CAB
- MT_PC_Hermes_GenericLight_REG_060609.CAB (Smart Dialing)
2) When you delete the unncessary CAB files, did you have to modify the Config.txt in the ExtROM folder itself? This text file list all the CAB files that will be installed, seemingly in a particular order.
lanwarrior said:
I did that. As a matter of fact, I used the ExtROM mount cab to access the cabs directly.
That's interesting to know! I think it affects mostly on the Messaging application, since it also make Email accounts disappear, not just MMS.
If you don't mind, can you let me know the following:
1) Which .CAB file did you leave (not delete)? I assume they are the following:
a. MMS Shortcut
- T_mm1lib_DLL.CAB
- MT_Shortcut-MMS-Hermes.CAB
b. Smart Dialing
- ShortString_Keypad_XML.CAB
- MT_PC_Hermes_GenericLight_REG_060609.CAB (Smart Dialing)
2) When you delete the unncessary CAB files, did you have to modify the Config.txt in the ExtROM folder itself? This text file list all the CAB files that will be installed, seemingly in a particular order.
Click to expand...
Click to collapse
I wanted MMS out, s I deleted all the files that had MMS in their name. Sine you apparently WANT MMS, you should leave those in, and I guess delete whatever you don't want. Regarding the text file, I actually tested it both ways. If you edit i and clean it up, it'll work, but if you leave it as is, it won't complain and will just silently skip over the things it ca't find. So, basically, the only reason to clean up the removed files out of the config.txt file is for, um, aesthetic reasons. You don't have to, but if you feel better about it being clean, then go ahead
rassah said:
I wanted MMS out, s I deleted all the files that had MMS in their name. Sine you apparently WANT MMS, you should leave those in, and I guess delete whatever you don't want. Regarding the text file, I actually tested it both ways. If you edit i and clean it up, it'll work, but if you leave it as is, it won't complain and will just silently skip over the things it ca't find. So, basically, the only reason to clean up the removed files out of the config.txt file is for, um, aesthetic reasons. You don't have to, but if you feel better about it being clean, then go ahead
Click to expand...
Click to collapse
Just so I know I am doing the right thing, which of the CAB files did you leave it in, with the exception of MMS?
ONe major item I need is the Smart Dialing feature.
Per dcd's request, please post in here to discuss anything to do with MMS on 3.1.x roms.
So i was having some questions about this.
I took the mms 5 out of the 3.0.4 rom and put it into the new 3.1.2 rom. Rom works fine. But i can't get mms to work.
I made a new STRING value, named it X-VzW-MDN and put the value my 10 digit number.
when i try to send a picture, it still wont' send.
When it trys to send, it shows the status of it and it is stuck at 0%
then it shows the warning message saying "unable to send your message."
There has to be something i did.. anyone help me? thanks!
registry settings for arcsoft 5 MMS (from 3.0.4 rom)
[HKEY_LOCAL_MACHINE\Software\Arcsoft]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Verizon Wireless"
"RecvSizeLimitType"=dword:00000001
"SendDelayedNotifyResp"=dword:00000000
"WAP1DefaultPort"=dword:000023f1
"WAP2DefaultPort"=dword:00000050
"LastAckTimeOut"=dword:00000fa0
"DebugPath"="\\My Documents\\UAContents\\MMS Log\\"
"EnableDebug"=dword:00000004
"SuppressDelayedNotifyResp"=dword:00000000
"WTPMaxRetryTimes"=dword:00000008
"ReportAllowed"=dword:00000001
"WAPDefaultTimeout"=dword:00001388
"HTTPDefaultTimeout"=dword:0003a980
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"X-VzW-MDN"="insert # here"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2;ISO-8859-1"
"Profile"="http://uaprof.vtext.com/utstar/xv68k/xv68k.xml"
"User-Agent"="utstar68kv1"
"Accept"="application/vnd.wap.multipart.related"
"Accept-Language"="en"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Verizon Wireless]
"ISP"="Verizon Wireless"
"Name"="Verizon Wireless"
"Gateway"=""
"MmscURI"="http://mms.vtext.com/servlets/mms"
"GatewayPort"=dword:00000050
"WAPType"=dword:00000001
"WAP2RecvDefaultSize"=dword:000fa000
"WAP2SendDefaultSize"=dword:0004b000
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"PacketSize"=dword:000003e8
"WAP1SendDefaultSize"=dword:00019000
"WAP1RecvDefaultSize"=dword:00019000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\Folder]
"BlacklistPath"="\\My Documents\\UAContents\\Blacklist.txt"
"PicturePath"="\\My Documents\\My Pictures\\"
"VideoPath"="\\My Documents\\My Videos\\"
"SoundPath"="\\My Documents\\"
"GenericPath"="\\My Documents\\"
"CannedTextFile"="\\My Documents\\UAContents\\CannedText_0409.bin"
"UnknownPath"="\\My Documents\\UnknownType Files\\"
"RecordPath"="\\My Documents\\"
"EmoticonPath"="\\My Documents\\UAContents\\Emoticon\\"
"SVGFontPath"="\\windows\\Arail.amf"
"UAContentsPath"="\\My Documents\\UAContents\\MMS UA\\"
"TemplatePath"="\\My Documents\\UAContents\\Templates\\"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI]
"MMSAccountName"="MMS"
"FlixSlideCountLimit"=dword:00000001
"EnableSaveAudioObject"=dword:00000000
"EnableRemoveCountryCode"=dword:00000001
"PlayVoiceMailWithSpeaker"=dword:00000001
"MaxVMRecipients"=dword:00000001
"FileSortType"=dword:00000001
"SignatureInLastSlide"=dword:00000001
"IgnoreRoamStatus"=dword:00000000
"MinimumCaptureVideoSize"=dword:00007800
"MinimumCapturePhotoSize"=dword:00001400
"SupportSignatureWhenForward"=dword:00000001
"SupportEXIF"=dword:00000001
"SupportFDN"=dword:00000001
"RecordRatio"=dword:00000050
"Transparency"=dword:00000041
"MMContentClassImageRichSizeLimit"=dword:0004b000
"MMContentClassTextSizeLimit"=dword:00007800
"TransportPath"="\\Windows\\Transport.exe"
"AutoAppendSubject"=dword:00000001
"SendExpiredPDU"=dword:00000001
"SupportSentStatus"=dword:00000001
"EnableForwardWithoutDownload"=dword:00000000
"AlwaysChooseCustom"=dword:00000001
"DownloadHomeNetworkOnly"=dword:00000000
"DefaultResolution"=dword:00000004
"Domain"=""
"EnableGenericPicker"=dword:00000001
"RecordType"=dword:00000001
"MaxDuration"=dword:000927c0
"SlideDuration"=dword:000007d0
"ReservedSpace"=dword:00000400
"CaptureEnable"=dword:00000003
"MinimumRecordSize"=dword:00001400
"ExpirationCount"=dword:00000006
"Expiration1"=dword:00000e10
"Expiration2"=dword:00005460
"Expiration3"=dword:0000a8c0
"Expiration4"=dword:00015180
"Expiration5"=dword:0003f480
"Expiration6"=dword:00000000
"EnableSaveRecord"=dword:00000001
"MaxRecipients"=dword:0000000a
"MaxEmailChars"=dword:00000030
"MinEmailChars"=dword:00000005
"MaxPhoneChars"=dword:00000014
"MinPhoneChars"=dword:00000003
"SupportFavoriteIE"=dword:00000001
"SupportBlackList"=dword:00000001
"SupportEmoticon"=dword:00000001
"AlphaTagDispTxt"=""
"AlphaTag"=""
"MediaPlayerSupportFilter"=".wma;.wmv;.mpeg;.mpg;.asf;.qcp;"
"FilterForGenericObjPickerHide"=".exe;.bat;.dll;"
"FilterForGenericObjPickerShow"="*"
"ImageFilter"=".jpeg;.jpg;.gif;.png;.bmp;.wbmp;.svg;.svgz;"
"AudioFilter"=".midi;.mid;.amr;.wav;.qcp;.awb;.rmi;.aac;.m4a;.mp3;.mp3d;"
"VideoFilter"=".mp4;.3gp;.3g2;"
"MaxSlides"=dword:00000009
"RejectAllMessage"=dword:00000000
"AppendSpaceToSubject"=dword:00000001
"AutoDisconnect"=dword:00000001
"AutoResend"=dword:00000000
"AllowSendReadReport"=dword:00000001
"EnableInsertUTF8BOM"=dword:00000000
"EnableSlideCharsLimit"=dword:00000000
"MaxCharsInSlide"=dword:00002710
"NeedDisplayMsgInfo"=dword:00000000
"NeedDisplayMMSCStatusText"=dword:00000001
"NotificationDisplayTime"=dword:00002710
"ErrorHandleLevel"=dword:00000002
"VoiceMailAccountName"="SMS"
"SMSAccountName"="SMS"
"EmailAccountName"="ActiveSync"
"VoiceMailClassName"="IPM.VoiceMail"
"SMSClassName"="IPM.SMStext"
"MMSClassName"="IPM.MMS"
"EmailClassName"="IPM.Note"
"NeedCheckMsgSize"=dword:00000000
"InboxDispTimeType"=dword:00000000
"EnableSaveObject"=dword:00000001
"StillImageHidePlaybar"=dword:00000001
"NeedInsertRootLayout"=dword:00000001
"InsertTimeStampWhenSending"=dword:00000000
"HideDlgControl"=dword:0041ff68
"ConnectviaMatchById"=dword:00000001
"MMContentClassVideoRichSizeLimit"=dword:0004b000
"MMSEventTimeOut"=dword:0000ea60
"SendDeliveryTimeInAbsolute"=dword:00000000
"SendExpireTimeInAbsolute"=dword:00000000
"DeliveryTimeCount"=dword:00000006
"DeliveryTime1"=dword:00000e10
"DeliveryTime2"=dword:00005460
"DeliveryTime3"=dword:0000a8c0
"DeliveryTime4"=dword:00015180
"DeliveryTime5"=dword:0003f480
"DeliveryTime6"=dword:00000000
"IsDeleteReportAfterRead"=dword:00000000
"IsVoiceMailSupportText"=dword:00000000
"IsSupportDrm"=dword:00000001
"NeedAddSpaceAfterFwRe"=dword:00000000
"AllowAssignDRMPhotoToContact"=dword:00000000
"AllowAssignDRMAudioToRingtone"=dword:00000000
"TelMatchLength"=dword:00000009
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001
"PlayerIdleTime"=dword:00001388
"SupportFullScreenPlayer"=dword:00000001
"DefaultCreationMode"=dword:00000002
"CreationFilter"=".txt;.jpg;.jpeg;.gif;.wbmp;.amr;.mid;.midi;.qcp;.mp4;.3gp;.3g2;.vcs;.vcf;.bmp;.png;.wav"
"DenyAnonymousMsg"=dword:00000000
"DenyAdvertisementMsg"=dword:00000000
"EnableServerEdit"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Context]
"SendToMediaAlbum"=dword:00000000
"SendViaMMS"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Context\MMSFilter]
"MMSAudioFilter"=dword:00000007
"MMSVideoFilter"=dword:00000006
"MMSImageFilter"=dword:0000001f
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"Wap2SendCount"=dword:00000003
"Wap2SendLimit1"=dword:00019000
"Wap2SendLimit2"=dword:00032000
"Wap2SendLimit3"=dword:0004b000
"Wap2RecvCount"=dword:00000003
"Wap2RecvLimit1"=dword:000fa000
"Wap2RecvLimit2"=dword:000fa000
"Wap2RecvLimit3"=dword:000fa000
"Wap1SendCount"=dword:00000003
"Wap1SendLimit1"=dword:00019000
"Wap1SendLimit2"=dword:00032000
"Wap1SendLimit3"=dword:0004b000
"Wap1RecvCount"=dword:00000003
"Wap1RecvLimit1"=dword:000fa000
"Wap1RecvLimit2"=dword:000fa000
"Wap1RecvLimit3"=dword:000fa000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\TryLimit]
"TryDefault"=dword:00000001
"Interval1"=dword:00000001
"Interval2"=dword:00000005
"Interval3"=dword:0000000a
"Interval4"=dword:0000001e
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\SendOption]
"Priority"=dword:00000081
"ExpiryTime"=dword:00000000
"MessageClass"=dword:00000080
"NeedDeliveryReport"=dword:00000000
"NeedReadReport"=dword:00000000
"SendAnonymously"=dword:00000000
"PriorityFac"=dword:00000081
"ExpiryTimeFac"=dword:00000000
"MessageClassFac"=dword:00000080
"NeedDeliveryReportFac"=dword:00000000
"NeedReadReportFac"=dword:00000000
"SendAnonymouslyFac"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\Capture]
"PhotoQuality"=dword:00000002
"VideoFileRatio"=dword:00000050
"VideoMode"=dword:00000002
"PhotoResolutionWidth"=dword:00000280
"PhotoResolutionHeight"=dword:000001e0
"VideoResolutionWidth"=dword:000000b0
"VideoResolutionHeight"=dword:00000090
Thanks!!
But i still can't get it to work.
EDIT!! I got it to work. I copyed some reg values here then it still didnt work. But i went ot the options, it had "1/2" in for the gateway.. hahaha took that out and it was fine.
I am trying to get someone to coment on if their Video MMS on verizon is working correctly. thanks.
These are the COMPLETE instructions on how to have working MMS with Verizon out of the box.
1. Cook your rom and flash (Arcsoft OEM no longer needed from 3.0.4 kitchen).
2. Install Verizon carrier package cab.
3. Install dcd VZW Arcsoft MMS 5.0.31.19 cab.
4. Soft reset.
That's it. Both MMS send and receive should work. Make sure you have an active data connection because you will not be able to send or receive anything without it.
this should work for vz users.
i have not tested it.
this would at least save you one cab install. install this and then create x-vzw-mdn key.
you still need my current vz carrier cab. with this cab, you dont also need the one gcincotta just posted.
edit: after thinking about it, im going to just revise this to include mortscript and throw a small script in startup to set the key... unless anyone disagrees?
edit: use cab posted on page 2
dcd1182 said:
this should work for vz users.
i have not tested it.
this would at least save you one cab install. install this and then create x-vzw-mdn key.
you still need my current vz carrier cab. with this cab, you dont also need the one gcincotta just posted.
edit: after thinking about it, im going to just revise this to include mortscript and throw a small script in startup to set the key... unless anyone disagrees?
Click to expand...
Click to collapse
sounds good to me........does this mean we are getting closer to MMS cabs for all carriers? If u need a tester for cricket, ill be a guinea(sp?) pig again
crwinger said:
sounds good to me........does this mean we are getting closer to MMS cabs for all carriers? If u need a tester for cricket, ill be a guinea(sp?) pig again
Click to expand...
Click to collapse
its not how i want to do it. i want 1 cab that supports everyone. this way is 1 cab that supports 1 carrier.
it at least separates the mms and rom topics, which i think is for the better.
this would at least save you one cab install.
Click to expand...
Click to collapse
Not really...they don't install both verizon carrier package cabs, just the one i posted.
This is better for now though if the mortscript is included to fetch the MDN key though.
Still gotta code that setup.dll though to get rid of the mortscript.
this way is 1 cab that supports 1 carrier.
Click to expand...
Click to collapse
This was only meant to be a temporary fix for vzw users until the proper cab is completed.
gcincotta said:
Not really...they don't install both verizon carrier package cabs, just the one i posted.
Click to expand...
Click to collapse
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
Click to expand...
Click to collapse
With that said, I'm going to change the instructions then in my post.
dcd, i made two cabs for cricket based off of ur vzw cab with mortscript. Both are working fine as I have quickly tested them. One cab uses only the MMS setup options and same mortscript but i had to change it to X-Cricket-MDN or whatever key it is. The other also incorporates a mortscript mms fix which was made by mooringhorse over at hofo and changes the left softkey and envelope key into scripts to delete the defaultconnectionsettings string if it exists then open the messaging. I can post them and let u see em if ud like? or if any does?
crwinger said:
dcd, i made two cabs for cricket based off of ur vzw cab with mortscript. Both are working fine as I have quickly tested them. One cab uses only the MMS setup options and same mortscript but i had to change it to X-Cricket-MDN or whatever key it is. The other also incorporates a mortscript mms fix which was made by mooringhorse over at hofo and changes the left softkey and envelope key into scripts to delete the defaultconnectionsettings string if it exists then open the messaging. I can post them and let u see em if ud like? or if any does?
Click to expand...
Click to collapse
awesome. of course. post them
MMs
dcd1182 said:
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
Click to expand...
Click to collapse
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
Click to expand...
Click to collapse
You probably didn't set it up right then, because MMS worked fine on 3.0.4 as long as it was set up correctly.
highhopes420 said:
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
Click to expand...
Click to collapse
cool, thanks for the feedback. the cab i posted above should work on any rom, any device.
dcd1182 said:
awesome. of course. post them
Click to expand...
Click to collapse
will post them later im at work and dont have access to them
Worked great.
I flashed 3.39 full sprint rom : stopped at "tap screen"
Ran dcd 3.12 kitchen
Ran Carrier Cab (vzw)
Ran this mms cab
Everything is working good.
I installed the cab attached to this thread immediately after the carrier cab, and I cannot seem to send / receive picture messages. I get the following error:
Code:
Unable to receive your message(s). Your message notification(s) will remain in the inbox.
I have checked my registry and the all the settings match those posted earlier in this thread.
Can anyone offer some suggestions where i might start looking?
.................................
I'm pretty sure this is not possible.
Not possible at all.
Sent from my DROID X2 using XDA Premium App
ferg40 said:
Not possible at all.
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
Some dude did something like this but with cricket its from rootzwiki i don't know if it help but i hope it does i never had the patience to read it good luck!
Code:
Full Flash Motorola Droid X2 to Cricket: Talk, Text, MMS, Internet
TECH DIGITAL'Z DROID X-2 Flash to cricket tutorial
INTERNET,APPS,TALK,MMS,AND TEXT, ON $45.00 PLAN!
------------------------------------------------------------------------------------------------------------------
First you will need to collect a few programs and files.
1.Motohelper Drivers 5.0, these can be gotten from the motorola website
2.Droid Explorer 64 bit or X86 depending on your computer and OS (just google the name)
3.Gingerbreak
4.GreenK45 Free or Pro (Shout out to Mraabhimself for this one) its only 1.99 for pro in the market and you wont get nagged to buy!
5.CDMA Workshop
6.QPST 2.7 Build 366 (note: the older builds WILL NOT connect to the X2)
7.A cricket wireless PRL (those can be found in the PRL section of Mycricketforum.com)
8.HW Virtual Serial Port (Google it)
U CAN GET ALL OF THESE FILES BY DOWNLOADING MY PACK!
TECH DIGITAL'Z Droid X and Droid X2 Cricket Flash Pack.zip
9. NV items from http://www.whiterabbit.org/android (u must generate this uniquely with your [email protected]cricket.com your MDN is the number everyone uses to call you!
-------------------------------------------------------------------------------------------------------------------
First off if the phone hasnt been activated yet or you have to clear all settings and you get stuck at the activation screen... REMOVE THE BATTERY AND USB PUT THE BATTERY BACK IN AND TOUCH THE DROID AS SOON AS YOU SEE IT! this will get you past the activation screen.
-------------------------------------------------------------------------------------------------------------------
Put your phone in PC mode,and shutdown
DO NOT PRESS POWER, Plug in USB to turn it back on.
Install HW Virtual Serial Port on your Computer.
The password is admin, go to Settings and uncheck NVT Enabled as it will cause issues if you dont
-setup your Virtual Serial Port for Com 10
Ip address is 192.168.16.2
set Port as 11008
Click CREATE COM
-------------------------------------------------------------------------------------------------------------------
At this point youre ready to open CDMA Workshop ( note: if you have a cracked version you may need to disable your antivirus to get it to work)
Once open Connect to Com 10
it should say successfully connected at the bottom if not go redo the steps above.
If all is Right with the world (J/p) lol .... Please continue to next step
On security tab send SPC 000000 (you should get a message saying the spc is correct and phone is now unlocked)
Go to tab labeled "Other" and write prl (this is where the PRL you downloaded comes into play) Select it from the location in which you downloaded it.
Goto "Memory" tab and click write under NV items, find the downloaded NV items you got from
http://www.whiterabbit.org/android
for example you must generate the NV items by inputing your MDN
(Your [email protected]). box opens telling you to save them as .txt and select them with cdma workshop2.7.
It should now say, 12 NV items were successfully written to phone.
Go to Main tab and click mode reset, The phone will restart,( at this point youre ready to talk and text on cricket)
---------------------------------------------------------------------------------------------
LETS GET ROOTED!!!!
Have Droid Explorer Installed on your computer
Have your phone connected USB and in PCmode
Open Droid Explorer and Connect to your phone
Click the little Icon that looks like a box with a cd in front of it,
It should open a Install Window
Click install and install Gingerbreak (I used Gingerbreak Version 1.20)
Now on your phone go into your apps menu and run gingerbreak
CLICK ROOT! the phone should then run gingerbreak and restart.
You should now be rooted!
NOW TO GET INTERNET AND APPS WORKING!!!
if you have QPST open it on the com port 10 read your settings. under MIP mip2,,PPP(Um,AN...etc it should say (your [email protected] )etc in the right columns....in the bottom box password may need to be written to phone, just type in cricket for both Um and An, cricket is the password.
Also select mobile ip+simple ip under MiP tab
select write to phone.
Phone will now restart.
After the phone has started up Go to wireless setting in settings and connect to wifi, Open the Market and install GreenK45free or Buy Pro.
Disable your Wifi now so that 3g can come back on. once you see 3g at the top open greenK45 and click Enable. (MAKE SURE YOU ALLOW GREENK45 ROOT ACCESS)
also when it restarts allow U2nl Proxy access to root) Just incase you dont know the Superuser will pop up asking you to allow or deny, click Allow!
You should now have Internet and Apps should have Connection.
As for MMS i havent found a way to get this working correctly yet on the Droid X2 but i will write a update to this tutorial when i do, AS OF NOW, INTERNET,APPS,TALK,AND TEXT WORK. MMS or PICTURE MESSAGING ARE BROKEN!
THANKS TO MRAABHIMSELFfor GreenK45
and anyone i may have missed for their contributions to this tutorial ....
MMS IS NOW FIXED, HERES WHAT YOU DO!
.Go to Market and download Apn Backup and Restore
.Open and Delete all APNS
.RESTART PHONE, I CANT STRESS HOW IMPORTANT THIS IS!
.Go to market and Download and install Anycut, Open it and choose Activity,Scroll down and select APNs create the shortcut then exit
.click the apns shortcut you just made, it should be on your main screen
.hit menu button and select New APN
.Enter these settings into your apn
Name - Cricket
APN internet
Proxy wap.mycricket.com:8080
Port 8080
Username [email protected]
Password cricket
Server wap.mycricket.com
MMSC http://mms.mycricket.com/servlets/mms
MMS Proxy wap.mycricket.com
MMS Port 8080
MCC 310
MNC 004
Authentication Type PAP or CHAP
APN type <Not set>
.Hit the Menu button again and hit save!
.Restart and youre done, YOURE FULLY FLASHED WITH EVERYTHING!
Hey man, thanks for putting together this set of instructions. Where can I download your flash pack? (TECH DIGITAL'Z Droid X and Droid X2 Cricket Flash Pack.zip). Thanks again for your work!
nope
FLashing to Cricket is NOT the same as changing the MEID on a Phone.
Besides Modifying Mobile Electronic Identification Numbers is Ilegal in the US.
FYI. IT IS POSSIBLE but very hard, specially on Motorola devices.
try this method. allthough its buggy it might work.
http://www.howardforums.com/showthr...droids)-ESN-and-MEID-correction-repair-SOLVED
not responsible for any damages tho.
Good Luck
LJ
The last couple of days I have really enjoyed trying out these new roms the Mx2 but I can never get the mms to work. My mx2 is with Bluegrass Cellular and if anyone can share the correct setting I would appreicate it. I have searched and searched and cant seem the find the correct ones.
fergie_cn said:
The last couple of days I have really enjoyed trying out these new roms the Mx2 but I can never get the mms to work. My mx2 is with Bluegrass Cellular and if anyone can share the correct setting I would appreicate it. I have searched and searched and cant seem the find the correct ones.
Click to expand...
Click to collapse
Try this tutorial. It's not for MX2 but its still for ICS and its what I did to get my MMS working on Cspire.
http://forum.xda-developers.com/showthread.php?t=1671592
I have tried that and could not get it to work.
Sent from my Milestone X2 using xda app-developers app
754boy said:
Try this tutorial. It's not for MX2 but its still for ICS and its what I did to get my MMS working on Cspire.
http://forum.xda-developers.com/showthread.php?t=1671592
Click to expand...
Click to collapse
Those settings were incorrect for my phone.
Sent from my Milestone X2 using xda app-developers app
fergie_cn said:
Those settings were incorrect for my phone.
Sent from my Milestone X2 using xda app-developers app
Click to expand...
Click to collapse
I too have bluegrass and could not get MMS to work forever. Finally I found the right combination of fixes that works for me (and has been replicated on all my coworkers devices). I am using this on Eclipse 2.3 on my MX2. I do not know if it will work for other carriers or other ROMs. Use at your own risk.
First, you will need root (which you have if you are on a custom rom), and you will need a file explorer that let's you browse with root permissions (I use ES File Explorer with root options set in settings).
Browse to /system/etc/ and replace apns-conf.xml with all the .xml files from the Conf folder in the attached Conf.zip file. I am not sure why there are so many, I copied them from a stock Bluegrass MX2. (Feel free to make a backup of your original apns-conf.xml prior to replacement).
Now, browse to /data/data/com.android.providers.telephony/databases/ and delete the 3 .db files here. (Again, make a backup if you wish). This will remove your existing text messages off your device!
Restart your device.
Now download "APN Settings Shortcut" from the Play Store. This is not an app or widget, but an actual shortcut. Press and hold on an empty space on your home screen and choose Shortcut and then APN Settings Shortcut.
Once it opens, hit menu and then new. Populate all fields with the following settings:
Name
Bluegrass Cellular (this doesn't matter, can be named anything)
APN
internet
Proxy
66.255.55.23
Port
9201
Username
%[email protected]
Password
blue
Server
*
MMSC
http://mms.iot1.com/bluegrass/mms.php
MMS proxy
66.255.55.23
MMS port
9201
MCC
DO NOT CHANGE THIS, LEAVE THE NUMBER THAT IS THERE
MNC
DO NOT CHANGE THIS, LEAVE THE NUMBER THAT IS THERE
Authentication type
PAP or CHAP
APN
mms
APN protocol
IPv4
Now click menu and save.
Your MMS now works!
This guide is a combination of fixes found at the links below:
http://forum.xda-developers.com/showthread.php?t=1671592
http://forum.xda-developers.com/showthread.php?t=1822890
http://forum.xda-developers.com/showthread.php?t=1815822
All credit goes to them, I just kept trying fixes until one worked for me, and it ended up taking a combination of three.
hilltopper06 said:
I too have bluegrass and could not get MMS to work forever. Finally I found the right combination of fixes that works for me (and has been replicated on all my coworkers devices). I am using this on Eclipse 2.3 on my MX2. I do not know if it will work for other carriers or other ROMs. Use at your own risk.
First, you will need root (which you have if you are on a custom rom), and you will need a file explorer that let's you browse with root permissions (I use ES File Explorer with root options set in settings).
Browse to /system/etc/ and replace apns-conf.xml with all the .xml files from the Conf folder in the attached Conf.zip file. I am not sure why there are so many, I copied them from a stock Bluegrass MX2. (Feel free to make a backup of your original apns-conf.xml prior to replacement).
Now, browse to /data/data/com.android.providers.telephony/databases/ and delete the 3 .db files here. (Again, make a backup if you wish). This will remove your existing text messages off your device!
Restart your device.
Now download "APN Settings Shortcut" from the Play Store. This is not an app or widget, but an actual shortcut. Press and hold on an empty space on your home screen and choose Shortcut and then APN Settings Shortcut.
Once it opens, hit menu and then new. Populate all fields with the following settings:
Name
Bluegrass Cellular (this doesn't matter, can be named anything)
APN
internet
Proxy
66.255.55.23
Port
9201
Username
%[email protected]
Password
blue
Server
*
MMSC
http://mms.iot1.com/bluegrass/mms.php
MMS proxy
66.255.55.23
MMS port
9201
MCC
DO NOT CHANGE THIS, LEAVE THE NUMBER THAT IS THERE
MNC
DO NOT CHANGE THIS, LEAVE THE NUMBER THAT IS THERE
Authentication type
PAP or CHAP
APN
mms
APN protocol
IPv4
Now click menu and save.
Your MMS now works!
This guide is a combination of fixes found at the links below:
http://forum.xda-developers.com/showthread.php?t=1671592
http://forum.xda-developers.com/showthread.php?t=1822890
http://forum.xda-developers.com/showthread.php?t=1815822
All credit goes to them, I just kept trying fixes until one worked for me, and it ended up taking a combination of three.
Click to expand...
Click to collapse
Self Bumping an old post so that anyone still in need can get some additional for ICS roms.
You can edit the APN information on ICS roms (or at least the latest CM9 Beta) by opeing Voice Dialer (it is a preinstalled app) and saying:
A P Ns
Then choose Open APNs. Hit the menu button and choose new, then enter the same information listed above. Hit the menu button again and choose save. Reboot and enjoy MMS on ICS.