I have done the upgrade and everything went fine. After the upgrade it ran to extended rom configs and they went fine. My phone is no longer showing that it is connecting to 3G. All I have is the E logo on top. I am in my office and it is a 3g area, I was connecting 3G before the upgrade.
I have reinstalled the PTT .cab, and Hard Reset after it etc... Still the same.
I was going to upgrade my radio from 1.33 to 1.34 this morning, but when I ran that installer it told me that it was the wrong country??? Should I keep my radio 1.33? anyone know whats going on with this?
Thanks.
Gromet said:
I have done the upgrade and everything went fine. After the upgrade it ran to extended rom configs and they went fine. My phone is no longer showing that it is connecting to 3G. All I have is the E logo on top. I am in my office and it is a 3g area, I was connecting 3G before the upgrade.
I have reinstalled the PTT .cab, and Hard Reset after it etc... Still the same.
I was going to upgrade my radio from 1.33 to 1.34 this morning, but when I ran that installer it told me that it was the wrong country??? Should I keep my radio 1.33? anyone know whats going on with this?
Thanks.
Click to expand...
Click to collapse
Maybe try putting SPL 1.09 on it then running the RUU Shipped Radio ROM 1.27 from Germany.
OK< I tried what you said. My phone is SPL 1.09. So I ran the 1.27 RUU. I got the same kind of error.
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
??????????????????????????????????????????????????????????????????????
Before loading another radio on it. just make sure it's the icon that is just not showing the correct connection, as some radios do... Check mspeed from your phone's browser for your actual connection speed... http://www.dslreports.com/mspeed
Gromet said:
OK< I tried what you said. My phone is SPL 1.09. So I ran the 1.27 RUU. I got the same kind of error.
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
??????????????????????????????????????????????????????????????????????
Click to expand...
Click to collapse
Sounds like you are not SUPERCID. Run Pof v3 Unlocker, verify supercid, then try again.
Bimboy said:
Before loading another radio on it. just make sure it's the icon that is just not showing the correct connection, as some radios do... Check mspeed from your phone's browser for your actual connection speed... http://www.dslreports.com/mspeed
Click to expand...
Click to collapse
Good point. MT_PC_Hermes_PTT_REG_070129.CAB fixes the icon settings in the new Cing ROM.
Just ran a speed test... 207kbit/sec...
You might also just go to the \extended_rom via totalcommander or other filemanager and execute autorun.exe or at least the cab that corrects the 3g/u/e icons MT_PC_Hermes_PTT_REG_070129.CAB
A lot of people have found that for some reason after upgrading via mfg package to the 2.06 cingular rom, that the entire entended_rom did not run; even if they did not stop it after the upgrade. It looked like it loaded to most people, but they did not have the useless icons like telenav, mobiTV, etc..
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Should I keep this radio or uupgrade it to a newer one, and if you think a newoer one than which should I try?
Gromet
Gromet said:
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Should I keep this radio or uupgrade it to a newer one, and if you think a newoer one than which should I try?
Gromet
Click to expand...
Click to collapse
I think the consensus is that 1.27 is best until/if GPS ever works.
WAIT!, Lat time I checked your sig, did you not have Radio 1.34? Now I see you are on 1.27. Did you downgrade for a reason? I started the 1.34 upgrade just before you posted. What are the differences between 1.27 and 1.34?
Gromet
More strangeness...
So I started the 1.34 radio upgrade, click update, phone reloads into blotloader, goes to upgrading radio stack please wait... PC shows Stage 1: Upgrading Radio, BUT it just sits there at 0% than errors out.
SO
I ran the 1.27 Upgrade, SAME THING>???????????????????
Whats goin on?
BTW, I'm on SPL 1.09 and I ran Pof's Unlocker again successfully....
Gromet said:
More strangeness...
So I started the 1.34 radio upgrade, click update, phone reloads into blotloader, goes to upgrading radio stack please wait... PC shows Stage 1: Upgrading Radio, BUT it just sits there at 0% than errors out.
SO
I ran the 1.27 Upgrade, SAME THING>???????????????????
Whats goin on?
BTW, I'm on SPL 1.09 and I ran Pof's Unlocker again successfully....
Click to expand...
Click to collapse
What is you Radio BL 107 or 108?
I had access to two separate 8525's. One had 1.34 and the other had 1.27 (BL0107). The 8525 I keep and use daily is on 1.27 with BL 0107. I am waiting for further NBH flashing directions before changing both devices to BL 0108.
When it goes into Botloader mode, it sais SPL 1.09, Where else do I find the bootloader version?
Gromet said:
When it goes into Botloader mode, it sais SPL 1.09, Where else do I find the bootloader version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=289173&highlight=hermes+rversion
mtty
To access the radio bootloader for that, but the command to do this (rtask a) has been removed in SPL-1.09.
If you downgrade the SPL to 1.04, you can see it using radio bootloader command "rversion":
Code:
USB>rtask a
Enter Radio Bootloader
rversion
Gromet said:
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Gromet
Click to expand...
Click to collapse
Gromet, this is normal behavour. Pofs unlocker flashes a hacked radio rom (1.16.00.00). Once device restarts, you need to copy the unlocker exe file (included in pof's unlocker zip) to your device, and then execute it on the device. I guess the exe that you run on the device interacts with the hacked radio to unlock the device somehow.
Once thats done, you'll get a 'success' message. Now you can download the shipped rom 1.27.00.00. Since your device is now superCID you can just exec the exe in the shipped rom directly to upgrade the radio from 1.16 to 1.27
Just make sure that you kill activesync before playing about with any rom flashing - it gets in the way.
Nigel
So yeah....
I did everything for PoF's Unlocker, and I GOT the SUCCESS message... but now I cant get any version of a radio upgrade to run. If activesync is on, It starts the upgrade and never gets past 0%, if activesync is off, i error out even before it ever starts the upgrade.
Gromet
Gromet said:
So yeah....
I did everything for PoF's Unlocker, and I GOT the SUCCESS message... but now I cant get any version of a radio upgrade to run. If activesync is on, It starts the upgrade and never gets past 0%, if activesync is off, i error out even before it ever starts the upgrade.
Gromet
Click to expand...
Click to collapse
I don't have much to add other than, 'me too'--but eventually the upgrade worked. I Ran POF's unlocker and chose supercid as well. But couldn't get past that 0% with the 1.27.00.00 radio upgrade.
I'm at:
IPL - 1.00
SPL - 1.04
While typing up this message I decided to try again and type up the error verbosely.
Sure enough the sixth try was the charm.
-g
Gromet said:
WAIT!, Lat time I checked your sig, did you not have Radio 1.34? Now I see you are on 1.27. Did you downgrade for a reason? I started the 1.34 upgrade just before you posted. What are the differences between 1.27 and 1.34?
Gromet
Click to expand...
Click to collapse
I am back to 1.34 and I created the NBH standalone Radio ROM since the new tools are available now.
You can easily go between Radio ROM again YEAH!
Here are Radio ROMs:
1.27 http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
1.33 http://uploadingit.com/files/8194/NBH Radio Only 1.33.31.00.zip
1.34 http://uploadingit.com/files/8194/NBH Radio Only 1.34.00.10.zip
wpbear said:
I am back to 1.34 and I created the NBH standalone Radio ROM since the new tools are available now.
You can easily go between Radio ROM again YEAH!
Here are Radio ROMs:
1.27 http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
1.33 http://uploadingit.com/files/8194/NBH Radio Only 1.33.31.00.zip
1.34 http://uploadingit.com/files/8194/NBH Radio Only 1.34.00.10.zip
Click to expand...
Click to collapse
So, excuse my ignorance, but are we now saying that we can upgrade the radio roms listed without ending up with the 1.08 bootloader, or alternatively that 1.08 no longer causes a problem?
Rob
Related
Does anyone know how to upgrade Radio 1.27 to 1.35 without getting BL 1.07 changed to BL 1.08??
There is no way. But then, why do you care what radio BL you have?
I just like having all possibilities of upgrading Hermes components back and forth. I am aware of Des's SSPL tool, but you need to be in Windows Mobile to use it.
However, I saw an interesting post where Izzard-UK managed to burn the OS.nbh from the Micro SD, it is probably possible to do the Radio and ExtrRom using some sort of file that will tell it which location to start Writing.
It looks like soon we will have have cleverer and more powerful tools.
Well, the technique for microSD loading of an nbh image is not new. I would say that if you can get bl 1.01MFG loaded then you're pretty much good to go with the sspl solution.
My Radio 1.35.00.11 upgrade failed with 114 Error and now Hermes starts in Bootloader mode.
What could go wrong and what to do?
I'm now running update again to see if it fails again or not.
I had XDA Live 0.10 + Radio 1.18, Bootloader 1.01 MFG as far as I remember.
@schriss: you need to go into bl with mtty & issue the following commands:
set 14 0
task 8
the first command sets the boot flag from "boot to BL" back to "Boot to OS"
the second command resets your hermes
This is the problem you would see if you were using a .nbf upgrader instead of an sppl upgrader. Bl 1.01MFG is missing commands and causes an abort.
However, sspl executes its own bl which is v1.09.
When you were doing the upgrade, when the RUU put your device in tri-color mode, what bl version was displayed?
Sleuth255 said:
@schriss: you need to go into bl with mtty & issue the following commands:
set 14 0
task 8
the first command sets the boot flag from "boot to BL" back to "Boot to OS"
the second command resets your hermes
This is the problem you would see if you were using a .nbf upgrader instead of an sppl upgrader. Bl 1.01MFG is missing commands and causes an abort.
However, sspl executes its own bl which is v1.09.
When you were doing the upgrade, when the RUU put your device in tri-color mode, what bl version was displayed?
Click to expand...
Click to collapse
I don't remember what was displayed, but you are right, I didn't use sppl upgrader because the link was broken and there was only one upgrade on FTP.
I've taken time and read WiKi and almost started flashing BL 1.04 hoping that it could let me run the upgrade again successfully - would that work?
I'm on mtty now trying your commands...
EDIT: That's the link that didn't work: ftp://xda:[email protected](GPS-Enabled)Trinity2Hermes-SSPL-comp.zip it's on GPS Driver first page.
EDIT2: Set 14 0 command helped, THANKS!
All radio-only links are still in the Wiki. The 1.35.00.11 link is still good there in the shipped radio only upgrades section. I'll check the GPS page & fix... The valid wiki link points to this file.
BL1.04 won't work if your radio is already using bl0108. Best to just use sspl and not worry about it.
Sleuth255 said:
There is no way. But then, why do you care what radio BL you have?
Click to expand...
Click to collapse
You mean even if we flash radio 1.27..00 with the newest 1.35.11 using sspl method, radiobootloader bl0107 will change to bl0108.
if this true why we should upgrade 1.27.00 to 1.35.11 and loose the ability to flash extracted radios in nbf format?
IIRC, you will loose the ability to enter some radio bootloader commands if you go to bl0108 with sspl. OTOH, you will gain the ability to use the latest radio ROMs for your device if you go the sspl route (since they are all bl0108 from 1.27 on). Those are the tradeoffs IMO.
I was in the Wiki looking around for various "task" commands when you are the in bootloader using TTY but I don't see anything outline the list of commands (e.g. task 32, task 8, etc...).
I thought may be there will be specific command to get the version of the Radio Bootloader from TTY.
Nevermind, I needed to dig deeper
I was in the same dilemma whether to use radio v1.27 or v1.35.
After much thinking, I decide to stick to radio v1.27 with HTC boot 0107.
I've done a bit of digging and it seems there really isn't much difference between the radio bootloader commands available in 0108 and 0107. I was mistaken. I was thinking about the Trinity Bootloader that was missing the commands that got you into the Radio bootloader AT interface...
So, bottom line IMO is there is no good reason to stick with an 0107 Radio bootloader. All the most current radios have the 0108 bl and with sspl, it's trivial to switch to any radio you want.
Sleuth,
Since this radio rom is GPS enabled, have you found that it uses more battery power compared to the 1.34 version? Or are the GPS chips always on anyway?
It doesn't use any more power unless an "[email protected]" command is issued to turn on the GPS radio. The only program that can do this on a hermes is superdave's VRSerial driver which you must install seperately.
How is the radio 1.35.00.11 compare with Radio 1.34.00.10??
Will it be better?
Sleuth255 said:
I've done a bit of digging and it seems there really isn't much difference between the radio bootloader commands available in 0108 and 0107. I was mistaken. I was thinking about the Trinity Bootloader that was missing the commands that got you into the Radio bootloader AT interface...
So, bottom line IMO is there is no good reason to stick with an 0107 Radio bootloader. All the most current radios have the 0108 bl and with sspl, it's trivial to switch to any radio you want.
Click to expand...
Click to collapse
my only concern is if the 1.35 rom is not as reliable/stable as the 1.20 rom i am using now, i am unable to go back since there is no SSPL radio for 1.20. The only versions i see in the wiki is 1.27, 1.34, 1.35
I updated my TyTN with the AKU 3.3 full update (OS, ExtROM, Radio 1.34 and the works).
Now I want to upgrade the radio to 1.35, since I have some connection problems, but wasn't it so that you couldn't do radio extracted rom only upgrades due to some reason?
Or can it be done with Des's SSPL bootloader?
[edit]
Never mind, found the answer and now running 1.35 Radio
[/edit]
@joej: its easy enough to make one for yourself from any Full NBH that has that radio. Table in Wiki will tell you which.
Welp, after one day with 1.35 radio I've decided to revert it back to 1.27. I've found that this 1.35 version is even worse than 1.34. The line has dropped (voice) 4-6 times / 1 hour talk.
I drive by car 2h/day the same route so there shouldn't be much difference between the signal quality along the way.
I just got a HERMES, with tha radio rom
1.16.00.00
32.53.7018.01H
and my spl is 1.10.Oli
I want to upgrade the radio. Some post in this forum say I should have a 1.04 spl for a safe operation.
Is that neccessary? Because I think since 1.10.Oli is based on 1.04. But I am not sure about this. Is there anyone upgrade radio using 1.10.Oli without downgrade? And how?
thanks!
Use the latest 1.40.Oli
Use always the latest version of HardSPL and upgrade the radio in NBH format using the latest CustomRUU.
I installed the 1.38.00.10 but the battery life drops!
It's still the 1.27 the best radio rom for hermes or the last 1.40 is better? TNX
pof said:
Use always the latest version of HardSPL and upgrade the radio in NBH format using the latest CustomRUU.
Click to expand...
Click to collapse
Got it!
Thank you!
And also thanks to ghz.
Done!
Have upgraded the 1.40.Oli Hard SPL from 1.10.Oli, And also upgraded Radio Rom to 1.38.00.11.
But there is still some accident happened.
When I use the RUU, which is from the wiki, and I am sure I use the RUU ONLY.
But when I run it, and choose autodetect spl, I got a wrong warning.(see the pic attached)
I choose force sspl, and follow the steps, and failed. (feel lucky no bricking happened.)
Again I did not use autodetect, choose spl-1.11/1.13/1.30/1.35/1.40, it's done in less than 15 minites.
So, maybe the second time I was doing right?
Arethusas said:
Done!
Have upgraded the 1.40.Oli Hard SPL from 1.10.Oli, And also upgraded Radio Rom to 1.38.00.11.
But there is still some accident happened.
When I use the RUU, which is from the wiki, and I am sure I use the RUU ONLY.
But when I run it, and choose autodetect spl, I got a wrong warning.(see the pic attached)
I choose force sspl, and follow the steps, and failed. (feel lucky no bricking happened.)
Again I did not use autodetect, choose spl-1.11/1.13/1.30/1.35/1.40, it's done in less than 15 minites.
So, maybe the second time I was doing right?
Click to expand...
Click to collapse
are you sure your phone isn't asking for comfirmation when you use autodetect? this feature uses the RAPI of the phone and polls a memory area to check the version... if the phone is rejecting the request then you're likely to get this error.
Olipro said:
are you sure your phone isn't asking for comfirmation when you use autodetect? this feature uses the RAPI of the phone and polls a memory area to check the version... if the phone is rejecting the request then you're likely to get this error.
Click to expand...
Click to collapse
I did not get any infom from the phone screen. Keep my eyes open widely to watch.
I had heaps of problems before, I just reflashed the original ROM and all was working well again, The radio version that come with the ROM is old.
Then I followed this guide
And updated to Hard-SPL v7 fine
Then I got to the Radio update step, I tried the radio it said (1.43)
It got to 7% and failed,
Then I tried 1.48 and 1.50
The same happened.
Why can't I update my Radio? Is there a trick or something you guys use?/
I tried it the SD card way and Its the Same.
Thanks.
Can a pro please explain how and what they used to get their PDA from its original state to having a cooked OS and a working Radio?
Korpse said:
I had heaps of problems before, I just reflashed the original ROM and all was working well again, The radio version that come with the ROM is old.
Then I followed this guide
And updated to Hard-SPL v7 fine
Then I got to the Radio update step, I tried the radio it said (1.43)
It got to 7% and failed,
Then I tried 1.48 and 1.50
The same happened.
Why can't I update my Radio? Is there a trick or something you guys use?/
I tried it the SD card way and Its the Same.
Thanks.
Can a pro please explain how and what they used to get their PDA from its original state to having a cooked OS and a working Radio?
Click to expand...
Click to collapse
That guide works 99% of the time. There is really only a small handful of possibilities:
1) You did not follow the guide exactly
2) The file you got for radio is corrupt (unlikely since you tried multiple files)
3) Your connection is unstable (unlikely since SD card method fails)
Hmm... Try the bricked hermes thread - is a sticky in the Hermes forum. It is long, but you may find something. It seems to me that the 7% hang on radio happens from time to time - but I am not sure if there is a standard fix. Maybe try the google search in my signature - use terms like hermes radio 7% brick or something. I am sure it is fixable. You got HardSPL to load properly, right? So your bootloader screen shows SPL version 2.10 Olipro or something like that?
The interesting thing is that you got it back to oringinal ROM & radio... You are using the latest Custom_RUU to do all the work. Makes me wonder if it is a CID problem, although I don't think you would even get to 7%, you would just get an immediate failure.
You could use MTTY to restore the radio back to factory I beleive..
You might also need to make sure your device is CID unlocked..
Thanks for the help guys
I updated to HardSPL-v7 and that went fine, it read IPL-1.04 and SPL-2.10.Olipro afterwards,
Then I attempted to update the radio and it failed, I followed the guide exactly.
Then I tried the SD way, the same.
Now. I'm doing the SIM and CID unlocker v3a by pof (Did it the SD way) and the IPL update completed with OK, The SPL went OK to, but the radio failed so i did a reset now I going to run that unlocker program and see if it succeeds,
then I will run the Factory ROM and restore it to how it was, then I will update to the Black Satin Cooked ROM, and I'll just have to stick with the old radio until I find a new method that might work.
Whats the go with the downgrading to bootloader 1.04 like it says in the wiki everywhere, what will that do that will help the radio update that the newest bootloader can't?
Korpse said:
Thanks for the help guys
I updated to HardSPL-v7 and that went fine, it read IPL-1.04 and SPL-2.10.Olipro afterwards,
Then I attempted to update the radio and it failed, I followed the guide exactly.
Then I tried the SD way, the same.
Now. I'm doing the SIM and CID unlocker v3a by pof (Did it the SD way) and the IPL update completed with OK, The SPL went OK to, but the radio failed so i did a reset now I going to run that unlocker program and see if it succeeds,
then I will run the Factory ROM and restore it to how it was, then I will update to the Black Satin Cooked ROM, and I'll just have to stick with the old radio until I find a new method that might work.
Whats the go with the downgrading to bootloader 1.04 like it says in the wiki everywhere, what will that do that will help the radio update that the newest bootloader can't?
Click to expand...
Click to collapse
If the CID unlocker runs fine, try the radio again. There is no reason that a new one would not work, if the older one works routinely.
The downgrade stuff is for people who want to return it to it's near-exact shipped condition - usually for warranty or sale purposes.
So, I ran the original factory rom
I did it via the SD card, as it is a lot more useful this way.
Heres the Results:
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS-
Click to expand...
Click to collapse
please mind the ranting....
WTF WHY THE F##K DID IT STOP AT GSM AGAIN FFS!
you can obviosly see why I'm pissed, its acting up like the radio is a BANK VAULT with 8" STEEL. I just can't flash it at all, but for some reason I have ran this ROM a while back and had no problems, so there must be a way
Did you run the CID unlocker successfully?
Have you used MTTY before? You may want to do that.
Had you successfully flashed back to the old ROM before?
I had heaps of problems before, I just reflashed the original ROM and all was working well again, The radio version that come with the ROM is old.
Click to expand...
Click to collapse
It seems like it - so the SAME ROM will not work now either?
I ran the newest dopod wm6 rom which was only the OS, some splash screens and the EXTROM, and to my amazement the GSM worked, the Radio and IMEI reappeared in the device information, but after a soft reset its gone again. it seems the GSM is still there but I can't touch it at all.
When I did the SIM and SuperCID unlocker it gets to the hacked GSM and fails,
but after a reset, I ran the tool and ticked bot options. then it said Success!
How can I check to see if it worked.
My bootloader is 1.40.Olipro (the one the SIM and CID unlocker downgraded me to)
Korpse said:
I ran the newest dopod wm6 rom which was only the OS, some splash screens and the EXTROM, and to my amazement the GSM worked, the Radio and IMEI reappeared in the device information, but after a soft reset its gone again. it seems the GSM is still there but I can't touch it at all.
When I did the SIM and SuperCID unlocker it gets to the hacked GSM and fails,
but after a reset, I ran the tool and ticked bot options. then it said Success!
How can I check to see if it worked.
My bootloader is 1.40.Olipro (the one the SIM and CID unlocker downgraded me to)
Click to expand...
Click to collapse
You can use mtty to see if the supercid process worked. The Hermes Wiki - in particular THIS SECION will be very helpful.
Yep its definitely SuperCID,
still reading through pages looking
I spent HOURS messing with **** on my phone, downgrading bootloaders, trying different ROMs, Stuffing with every command I could find for MTTY and anything else imaginable.
I got the radio to update, but its still stuffed
I added this to the Wiki because it works:
METHOD 2
Also, Ive found that Hard-Reseting the device restores GSM.
1. Remove the battery
2. wait 10 second
3. Re-insert Battery
4. Turn the device on
5. Watch for "NO GSM" on boot
6. if you see it. Return to step 1. (sometimes you have to do it up to 20 times)
If you see two lines of text flash up instead of 'No GSM' it means the GSM is functioning. For me this restored my radio in just 4 tries.
This ONLY works if your radio is NOT corrupted, but if you tried to updgrade and stalled between 0% and 15% of the GSM upgrade, it depends on the radio version you were trying to flash. But it's worth a try, the only downside is if your phone crashes, it will more than likely boot up with 'No GSM' so you'll have to do all over again.
Click to expand...
Click to collapse
I did what the last post said, had it booted with my radio working, and then I ran the RUU for the GSM 1.50.00.00 radio upgrade. and THIS IS UNBELIEVEABLE, AFTER ALL THAT STUPID STALLING ON 0 and 7%, it UPGRADED!!!!!
I have exactly teh same situation here.... my device is SUPERCID and its stalls on GSM upgrade every time
I already tried like 10 different versions of radio bootloader updates and none of them worked for me !!! It always stalls at 11% or 7%
MMTY output
Cmd>checkimage
IPL CRC checksum = 0x830E7601
SPL CRC checksum = 0x921BC30
CE CRC checksum = 0x26BC961C
ExtROM CRC checksum = 0xE7056FB7
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
Can somebody help ? I am sure there is a way to flash the new radio version !!!
There is a defenitite fault in RADIO ROM and I wish I should have never tried to upgrade to 1.50.0 . Last coule of days have been a nightmare for me. I read the entire foruma and stil could not find a solution to my problem.
METHOD 2
Also, Ive found that Hard-Reseting the device restores GSM.
1. Remove the battery
2. wait 10 second
3. Re-insert Battery
4. Turn the device on
5. Watch for "NO GSM" on boot
6. if you see it. Return to step 1. (sometimes you have to do it up to 20 times)
If you see two lines of text flash up instead of 'No GSM' it means the GSM is functioning. For me this restored my radio in just 4 tries.
This ONLY works if your radio is NOT corrupted, but if you tried to updgrade and stalled between 0% and 15% of the GSM upgrade, it depends on the radio version you were trying to flash. But it's worth a try, the only downside is if your phone crashes, it will more than likely boot up with 'No GSM' so you'll have to do all over again.
Click to expand...
Click to collapse
sure i've done it too many times, atleast after the 7nth time i've stopped counting but still i have no GSM .
any help is much appreciated folks .
WBR
Also whatever ROM i install after it starts for the first time it starts to customize and install oem apps it stops while customizing at the theme part i don't know why but it did .
do a "checkimage" in MTTY, if your radio is corrupt then that method wont work, also about the updates stalling, do task 28 in MTTY, then reboot
MMTY output
Cmd>checkimage
IPL CRC checksum = 0x830E7601
SPL CRC checksum = 0x921BC30
CE CRC checksum = 0x26BC961C
ExtROM CRC checksum = 0xE7056FB7
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
So is the radio corrupt ?
What is task 28 ? WIKI SAYS - Format DOC - What is DOC ? Is it related to RADIO ROM ?
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Read my specs. I have the same rom you do. should work
1.54.07.00 works
1.54.07.00 works well with vp3g's roms
If you can't be past error 262, here's an option:
Copy "SSPL-HERM.exe" to your miniSD then run it from the phone.
Your phone will reboot into the BL (tri-color screen)
Connect your phone via USB to your computer
When AS finally pops up, click cancel
Run RUUWrapper.exe and force SSPL
That should do it.
MontyV77 said:
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Click to expand...
Click to collapse
1.48.00.00
Anyone encountered this error before? It gets to 8% and then phone reboots and I get this on my PC screen. It says Error [328] (see attached image)
I am using Radio 3.37.75 (verizon), and my bootloader shows 2.40 Olipro
Any ideas?
Try this RUU it is version 3.16.4.3.
Yes, thats the version that I am using. I think... when I run it, it says 3.16.4.3 in the window title bar. (see screen shot)
EDIT: I tried it anyways, and I got the same thing. Do I have the right bootloader? Would a different one help?
what are you trying to flash
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
wildcard said:
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
Click to expand...
Click to collapse
Just follow my post here and only use the files and Radios that I provide. Make sure you read a few times so you understand, and dont skip anything. Most important based on what I have read in this thread. Use only the radios I provide on my share site and take your time paying close attention.
http://forum.xda-developers.com/showpost.php?p=3687027&postcount=144
Thanks, I'll do it exactly like that. I will keep you posted. I have to get a new micro SD card, I only have an SDHC 8 GB
The radio can be updated via usb. I do it all the time. But it does hard reset the phone in the process.
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
I followed the directions exactly like in Ryan's post mentioned above, (used USB instead of SD card), and it works!
Fully functional. I used Radio 3.42.02 (somewhere I saw that it was recommended over the others, went with it to be safe). Then Flashed Ryan Mogul Rom 2.2 Heavy.
Thanks everyone!
drewcam888 said:
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
Click to expand...
Click to collapse
i have spl olipro-2.40, rom dcd 3.2.6 and want to upgrade radio to 3.42.50 using usb. should i downgrade spl to 1.20 before upgrade the radio? or i stick with current config and update the radio using RUU?
Still cant load radio
Obtained 6800 originally Alltel, not sure which radio, Had Olipro 2.40 installed, would hang on Alltel splash screen.
Could not get any RUU loads to complete (from USB or SD card), usually would fail around 50%.
Eventually was able to get RyanMogul 3.1 Cricket (lite) to load, but shows no radio and eventually screen goes blank. Never goes into active Sync mode.
We force boot loader mode and try and load several radios including Titan_Radio_ROM_3.42.50.Alltel.rar, Titan_Radio_ROM_3.35.04,
but keep Getting error 328 from RUU when I try to load a radio..
tried RyanMoguls "Here is a fix for GPS for all you VX6800 users that gps will not function!!", but cant run relocker because no active sync connection.
Stock Verizon ROM RUU also gets error 328.
Any ideas.