everyone read edit 3 of my post here
http://forum.xda-developers.com/showthread.php?t=294012
walshie, ye old' spammer
dutty said:
walshie, ye old' spammer
Click to expand...
Click to collapse
ye old' spammer?? what are you talking about... im just letting all the users know of my success....
edit.. if i wanted to spam you i would have copied and pasted the procedure into here too
So if i wanted to downgrade my radio, not touch the rom and extro (meaning not wanting to do a hard reset) to 1.27 i can use mtty?
fone_fanatic said:
So if i wanted to downgrade my radio, not touch the rom and extro (meaning not wanting to do a hard reset) to 1.27 i can use mtty?
Click to expand...
Click to collapse
no you cannot use mtty to downgrade your radio rom... read my first post here... http://forum.xda-developers.com/showthread.php?t=294012
walshieau said:
no you cannot use mtty to downgrade your radio rom... read my first post here... http://forum.xda-developers.com/showthread.php?t=294012
Click to expand...
Click to collapse
I read that, so i'll ask my original quetion.
If i wanted to downgrade my radio do i have to reflash the entire package (rom extrom and radio) following the steps in edit 3?
fone_fanatic said:
I read that, so i'll ask my original quetion.
If i wanted to downgrade my radio do i have to reflash the entire package (rom extrom and radio) following the steps in edit 3?
Click to expand...
Click to collapse
no you dont have to reflash the entire package... in edit 3 if you follow the steps you remove the extrom and os from the nbh file wihen you run the nbhextract program... but these can be left in if you want...
I think you must cange your guide becouse first of the edit3 you write:
4.Just to clarify... once you have flashed radio bootloader 108 onto your device it is impossible to do Extracted Radio only upgrades at this time... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index...actedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index..._BootloaderMFG
Click to expand...
Click to collapse
... so it is impossible to use Extracted Radio only upgrades but its possible do it whit edit 3.
yeah i could do that... or you could read the whole post and realise that it was a work in progress as stated and to read all points to avoid you bricking your device...
Related
Ok this is an e-mail I got and I answered it, but I thought..lets post it for people that are interesed in upgrading there phone, but dont know what or how to do.
*Yes I know Wiki exist!
mccreath said:
Hi Mate,
Hope you don't mind the PM, but I just got my MDA Vario II replaced under warranty and have to start all over again with the customization.
I saw you had the same device and a great setup, and wondered if you could tell me the quickest/ best way to get WM6 and the ROM/Radio on mine please?
Any help would be great, thanks,
Andy
Click to expand...
Click to collapse
Hi!..
If you dont know some things, read WIKI, it helps (most of the time to get an answer)
First you upgrade your SPL
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. This way you prevent to brick your PDA again.
Click to expand...
Click to collapse
I dont got my warranty anymore because I made my phone simlock-free. *if you do this, READ that topic carefully!! *I just did it because I thought it was fun to mess arround with my phone..*and to tell you the truth..it was!
After that, you do this:
Ok..this is what I did, I installed this version of WM6 (for you notice; doing this is on your own risk.)
Then I upgraded my Radio to 1.41.00.10 (if you wanna know what that is, go Wiki)
Here you can find some great programs.
owyeah..here you can find the latest version of windows Live Messenger!
Hope you will learn something of all of this
cheers!
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
Click to expand...
Click to collapse
True Thq..I'd forget to note that
Hi all I am new to this Hermes flashing I have read adn read on this forum lots of great stuff some of which I understand some of which goes totally over my head.
I got a T Mobile Vario 2 and took the part jump to upgrade to SPL -2.10.Olipro not sure why but I did it. Nothing wrong with the new bootloader but will it be over written when and if T-Mobile issue a SHIP ROM for the VArio 2 ??
Also I took the step of upgrading the RADIO to 1.41 again seems to work fine will this also be over written when and if they issue a SHIP ROM. ??
The reason I ask is I would like to know if its possible to downgrade to Radio 1.05.05.00 and IPL -1.01 and SPL-1.04 at some point if need be is this possible ?? Some say it is and some say it is not.
I also have been tempted by the ROMS for WM6 but cannnot make up my mind which to choose for the VARIO 2 to run better on. I dont use it for anything major just calling and wireless email via 3g or GPRS. Any users of the Vario 2 in the UK found a WM6 ROm that works great on the Vario 2 ?
skauk said:
will it be over written when and if T-Mobile issue a SHIP ROM for the VArio 2 ??
Click to expand...
Click to collapse
It will be kept on device. It will only be over written if you flash the rom using SSPL.
skauk said:
Also I took the step of upgrading the RADIO to 1.41 again seems to work fine will this also be over written when and if they issue a SHIP ROM. ??
Click to expand...
Click to collapse
Yes, unless you extract the radio from the NBH file prior to flashing.
skauk said:
I would like to know if its possible to downgrade to
Click to expand...
Click to collapse
Radio 1.05.05.00
Click to expand...
Click to collapse
No, now that you've flashed 1.41 your htc_boot is 0108. If you flash radio 1.05 you'll get a brick, as it has htc_boot 0106.
and IPL -1.01 and SPL-1.04
Click to expand...
Click to collapse
Yes, it is possible, using SSPL.
Hi,
I'm going to flash my Orange UK Nike but I have one question. Do I have to do anything before I flash with the .exe file from NetrunnerAT?
the file is
RUU_Nike_HTC_PTG_1.31.410.09_Radio_Nike_1.58.16.27_signed_Ship
Or is just run the file, wait, and enjoy?
if your HTC is a PTG Device ... you only need to Start! If you are have buy it from a other country, you need HardSPL first!
NetrunnerAT said:
if your HTC is a PTG Device ... you only need to Start! If you are have buy it from a other country, you need HardSPL first!
Click to expand...
Click to collapse
It's a UK device... So what should I do first?
1 - Unlock it
2 - Use Hard SPL
3 - Run .exe file?
only need hardspl part and then flash your favorit os!
NetrunnerAT said:
only need hardspl part and then flash your favorit os!
Click to expand...
Click to collapse
ok, but in wich order do I do what? Do I unlock first, or install hardspl first? Or is not relevant?
anyone can help me please?
Tiago Machado said:
ok, but in wich order do I do what? Do I unlock first, or install hardspl first? Or is not relevant?
Click to expand...
Click to collapse
If you're just doing a ROM or Radio, you don't need to unlock. Just flash the hardspl and then flash the rom or radio.
eyecrispy said:
If you're just doing a ROM or Radio, you don't need to unlock. Just flash the hardspl and then flash the rom or radio.
Click to expand...
Click to collapse
but I'm don't want just flash the device.I want to unlock it too.I just need to know if there is any problem if I unlock the device, and then install hardspl and flash rom...
why i can not install rom file in my htc
i do no....
rom ver.. in my htc
1.72.119.0 (82124)wwe
radio ver
2.07.51.22_2
I work well as written on forum..
run the program CustomRUU
Start the program and do everything as written on forum..
and we just stand 0%,,,no 100%
matesitum said:
why i can not install rom file in my htc
i do no....
rom ver.. in my htc
1.72.119.0 (82124)wwe
radio ver
2.07.51.22_2
I work well as written on forum..
run the program CustomRUU
Start the program and do everything as written on forum..
and we just stand 0%,,,no 100%
Click to expand...
Click to collapse
Sounds like you have not run HSPL on your phone yet. Do a search for hard spl and it will give you all you need to know
zelendel said:
Sounds like you have not run HSPL on your phone yet. Do a search for hard spl and it will give you all you need to know
Click to expand...
Click to collapse
I don't think you have followed the process carefully.
1. HSPL3
2. Task29
3. Flash a new ROM
If you follow this nothing wrong should occur. Search for the first two on the forum.
I want to use Artemis fully and note that it requires spl 3.03 which comes with stock rom 3.14.
Problem is that that has not been released for my phone (T-Mob UK).
I can use HSPL to load 3.14 and then remove HSPL - but I got back to SPL 1.66 and not 3.03.
Does anyone have any suggestions?
Thanks
Tony
goldcard goldcard or goldcard.
samsamuel said:
goldcard goldcard or goldcard.
Click to expand...
Click to collapse
I know I am walking right into some abuse ;-) but I have to ask where there are instructions for doing "goldcard". so far I have only flashed with HSPL, SPL, CustomRUU etc
Thanks
http://forum.xda-developers.com/showthread.php?t=825397
<insert derogatory and/or sarcastic remarks regarding searching and google etc. of your choice here>
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
mb76 said:
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
Click to expand...
Click to collapse
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
TonyOCL said:
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
Click to expand...
Click to collapse
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
kurt-willems said:
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
Click to expand...
Click to collapse
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
TonyOCL said:
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
Click to expand...
Click to collapse
Like mentioned at the post I send you lastly; there you can see/reed that you can contact oliverweidel if you need some new image file.