I have big problem!
I kill my TyTN,
I go to multi port...........
---------------------------------------------
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 473
Storage Total block: 463
Total Bad Block in CE: 0
NeedToEraseBlockStart: 486
Storage format success
USB>lnb RUU_SIGNED.nbh
:F=RUU_SIGNED.nbh
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 501A0000 Length: 5544382
***************************************
****************************************
*******************************
****************************************
****************************************
****************************************
****LAST BLOCK, dwBytesCollected=0x10000
Code entry point at 0x556E0000
Write Nand Success
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 17
Can't find OS in flash!!!
Storage format success
USB>task 8
-----------------------------------------------------------
can you halp me? please!
ouch.... you tried to flash the entire nbh. This file contains os, extrom, radio and splash screens. You need to take that apart first with nbhextract to get os.nb then flash that instead. Hopefully you'll be able to....
Related
What is this file ???
Is it aku 3.3 in english or russian????
-----------------------
MODERATOR EDIT:
Changed the subject, use this as the main thread to discuss HTC 2.05 WWE AKU 3.3 ROM issues.
Download and ROM details in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
BE SURE TO READ THE WIKI BEFORE ASKING QUESTIONS PLEASE
English.
If you need Russian one look for it in Upload/Temp directory
It is in English, I just flashed it using 1.10mfg method
An still no MUI I presume ?
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
bubu23 said:
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
Click to expand...
Click to collapse
ftp://ftp.xda-developers.com/Uploads/Hermes/
Here you have.
BuT WhY TyPinG LikE ThAt ! Are YoU PaRkInsOn ?
Is it from HTC or cingular? I've heard both are about to release an AKU 3.3 rom
loll no im not parkinston maybe my keboard is
but why the file finish with test?
its not good its just test???
plz tell me im horny on that fileee(rom)
English confirmed.
Just flushed OS and Ext rom.
ROM Version:2.05.255.1
ROM Date: 01/17/07
ExtROM Version: 2.05.255.101
OS 5.1.461 (build 15671.3.3.0)
I can't get to FTP :/ what user and password ?
reg
Sar
Username = xda
Password = xda
You get to the ftp by this link no pass needed...
ftp://xda:[email protected]/Hermes/
Cheers
Seems very fast...
cant see where it says TEST though. My of been a test for the carriers, so likely the RTM for the carriers to then implement.
So far, so good... at least this one is english, unlike the Swedish update i did yesterday
in the ftp thers only the swedish rom i cant find the wwe rom??
RUU_Hermes_2.05.263.1_6275_1.34.00.10_108_SVE_HTCEUR.exe is now up... Guessing it is an official release from htc?
Cheers
Well i flashed it also.
the Test is included in the splash.bmp. =)
really... But imho the swedish one is a bit faster, but that is just subjectiv i didnt tried to test it with a benchmark program.
btw. any update from cingular?
Somethings fishy about this.
This is supposed to be AKU 3.3, but theres no WPA2 support???
not sure this is a complete ROM?
Does this mean MS Voice Command over bluetooth is fixed without the hacks?
I have detect problems with this rom! Is better wait for another!
Problems detect:
- No wpa2
- Phone connection always breaking down
- Can't go to my contacts!
- ActiveSync always says pocket is out of memory (yes I reset several times)
Flash Using Lnb
This is my first time flashing using lnb and i followed the wiki about using mtty..i just wanted an experimented persons to examine the output of mtty and tell me if the update was perfectly done and if there was no problems in nand please...
Thanks
Iverson....
USB>
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 461
Storage Total block: 475
Total Bad Block in CE: 0
NeedToEraseBlockStart: 474
Storage format success
USB>lnb 06_OS.nb
:F=06_OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 501A0000 Length: 3C0C800
*********************************************
*********************************************
*********************************************
*********************************************
*********************************************
*********LAST BLOCK, dwBytesCollected=0x13800
Code entry point at 0x53DA0000
Write Nand Success
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 473
Storage Total block: 463
Total Bad Block in CE: 0
NeedToEraseBlockStart: 486
Storage format success
USB>
Just curious as to how long it should take to flash the OS.nb file through mtty???
its been sitting on the 'start NB image download' for about 30 minutes now...
Code:
USB>
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 463
Storage Total block: 473
Total Bad Block in CE: 0
NeedToEraseBlockStart: 476
Storage format success
USB>lnb OS.nb
:F=OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
well it should take no where near 30 minutes (a full RUU upgrades takes only 25minutes)
when i upgraded to 2.05 via mtty it was done in under ten minutes (fast).
are you sure the filename is OS.nb because be default when you extract the .nb from the .nbh is will be 06_OS.nb
yes im sure it was named correctly else it wouldnt have picked up the
Code:
USB>lnb OS.nb
:F=OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
should i cancel it and start again??
when you extracted the .nb files from the .nbh did you rename any files?
If you didnt, then again I think OS.nb doesnt exist and that is why it is hanging there after more than 30 minutes.
also, make sure that mtty.exe is in the same directory as the .nb you are trying to flash.
yes i renamed the files from 06_OS.nb to OS.nb and the files are in the same directory... what version and connection speed are you using in mtty??? the version im using is 1.11a...
v1.11a and default settings for the USB connection.
I guess you can restart the process, because immediately after the messages you see on the terminal output should have sees the progress meter kick into full swing.
hahahahaha you were right... was using the mtty from a different folder ... time for some sleep....
there you go,
time for sleep? its only 3:22pm in Melbourne...... should you be at work?
EDIT: I cant talk, reading forums on company time, academia is so good.
yeah at work.. but been up all night playing with all these new tools!!!!
Dear All,
Could someone please tell me how to get the SPL back to original
my jasjam
HERM100
IPL-1.00
SPL-2.10.OLipro
I try to use spl-1.01MFG_Pack.zip to flashing of unsigned code via the 'lnb'"
Cmd>task 32
Level = 0
Cmd>lnbs spl-1.01.nbs 50020000
:F=spl-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 50020000 Length: 402C4
***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
what should i do to reflash original SPL over SPL2.10.Olipro?
try following this exactly, worked for me.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Cmd> lnbs SPL-1.01.nbs 50020000
:F=SPL-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF
start NB image downloadS
Load ADDR: 50020000 Length: 402C4
H***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
BTW
I want to update my sys to WM6.1
What does this mean?
I wanna to change my spl to 1.01
my herm200
IPL-1.04
SPL*2.01.olipro
I am being online to wait your answers
thanks
Hello,
I was working on a project to run linux on my Geniatech ATV1220 but it didn't work out as planned. So I want to run android on the box again, but I can't do it. I think it is because I updated the uboot with the latest amlogic release (which probably broke something). Right now the box is directly booting to command line. I tried putting the update files on sd card, which I did with another of those boxes to update the android version and it worked flawlessly, when I booted it up after holding down the reset button, but this box seems to ignore this all. Is there any way I can restore my box from command line? I have UART connection so I can see the log and enter commands etc. My bootlog is here:
Code:
EEEE I3000000032940xf300110303;77520EEEE I400000004294_M6_BL1_3431>2534313
TE : 77484
BT : 16:08:27 Apr 10 2014
CPU clock is 1200MHz
wait pll-0x03 target is 0204 now it is 0x00000203
DDR clock is 516MHz with Low Power & 1T mode
DDR training :
DX0DLLCR:40000000
DX0DQTR:ffffffff
DX0DQSTR:3db05001
DX1DLLCR:40000000
DX1DQTR:ffffffff
DX1DQSTR:3db05001
DX2DLLCR:40000000
DX2DQTR:ffffffff
DX2DQSTR:3db05001
DX3DLLCR:40000000
DX3DQTR:ffffffff
DX3DQSTR:3db05001
Stage 00 Result 00000000
Stage 01 Result 00000000
Stage 02 Result 00000000
Stage 03 Result 00000000
DDR init use : 41812 us
HHH
BootFrom SPI
0x12345678
Boot from int dev 1stSPI RESERVED
TE : 346489
System Started
U-boot([email protected]) (Apr 10 2014 - 16:08:14)
aml_rtc_init
aml rtc init first time!
clr h-ram
DRAM: 1 GiB
relocation Offset is: 105e0000
MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
[mmc_register] add mmc dev_num=1, port=2, if_type=6
SDIO Port B: 0, SDIO Port C: 1
aml_i2c_init
NAND: Amlogic nand flash uboot driver, Version U1.06.017 (c) 2010 Amlogic Inc.
SPI BOOT : continue i 0
No NAND device found!!!
NAND device id: 98 d7 84 93 72 57
NAND device: Manufacturer ID: 0x98, Chip ID: 0x98 (Toshiba A serials NAND 4GiB TC58TEG5DCJTA00 )
1 NAND chips detected
#####aml_nand_init, with RB pins and chip->chip_delay:20
bus_cycle=5, bus_timing=7, start_cycle=6, end_cycle=9,system=5.0ns
oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE
aml_chip->oob_fill_cnt =128,aml_chip->oob_size =1280,bch_bytes =70
multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE
aml_nand_init:oobmul =1,chip->ecc.layout->oobfree[0].length=32,aml_chip->oob_size=1280
aml nand env valid addr: 58000 ,status =0
key start_blk=1016,end_blk=1023,aml_nand_key_init:684
aml nand key valid addr: fe000000
aml nand key valid addr: fe400000
aml nand key valid addr: fe800000
aml nand key valid addr: fec00000
CONFIG_KEYSIZE=0x10000; KEYSIZE=0xfffc; bbt=0x1330; default_keyironment_size=0xeccc
i=0,register --- nand_key
NAND bbt detect Bad block at 0
NAND bbt detect factory Bad block at 8000000
NAND bbt detect factory Bad block at 15400000
NAND bbt detect factory Bad block at 1ec00000
NAND bbt detect factory Bad block at 43c00000
NAND bbt detect factory Bad block at 5b800000
NAND bbt detect factory Bad block at 65800000
NAND bbt detect factory Bad block at 69c00000
Creating 8 MTD partitions on "nandnormal":
0x000000800000-0x000001000000 : "logo"
0x000001000000-0x000001800000 : "aml_logo"
0x000001800000-0x000002000000 : "recovery"
0x000002000000-0x000002800000 : "boot"
0x000002800000-0x000043400000 : "system"
NAND bbt detect factory Bad block at 8000000
NAND bbt detect factory Bad block at 15400000
NAND bbt detect factory Bad block at 1ec00000
0x000043400000-0x00004b800000 : "cache"
NAND bbt detect factory Bad block at 43c00000
0x00004b800000-0x00006c400000 : "userdata"
NAND bbt detect factory Bad block at 5b800000
NAND bbt detect factory Bad block at 65800000
NAND bbt detect factory Bad block at 69c00000
0x00006c400000-0x0000fe000000 : "NFTL_Part"
NAND bbt detect factory Bad block at 72000000
NAND bbt detect factory Bad block at 76400000
NAND bbt detect factory Bad block at 7dc00000
NAND bbt detect factory Bad block at 8dc00000
NAND bbt detect factory Bad block at a0000000
NAND bbt detect factory Bad block at a0800000
NAND bbt detect factory Bad block at a1800000
NAND bbt detect factory Bad block at b4000000
NAND bbt detect factory Bad block at d2000000
NAND bbt detect factory Bad block at f4400000
NAND bbt detect factory Bad block at f4800000
NAND bbt detect factory Bad block at f4c00000
NAND bbt detect factory Bad block at f5000000
NAND bbt detect factory Bad block at f5400000
nandnormal initialized ok
detect mx chiprevD :1 and nand_type: 20
nand_curr_device =1
SPI BOOT,spi_env_relocate_spec : env_relocate_spec 53
SF: Detected MX25L3205D with page size 256, total 4 MiB
SPI NOR Flash have write protect!!!
In: serial
Out: serial
Err: serial
register usb cfg[0] = 9fe83258
Net: Meson_Ethernet
init suspend firmware done. (ret:0)
detect_storage
nand exist return 0
setenv storage nand
reboot_mode=charging
---wipe_data=
itest - return true/false on integer compare
Usage:
itest [.b, .w, .l, .s] [*]value1 <op> [*]value2
SARADC open channel(4).
SARADC open channel(4).
ir init
Hit any key to stop autoboot -- : 0
exit abortboot: 0
Saving Environment to SPI Flash...
SPI BOOT,spi_saveenv : saveenv 97
Erasing SPI flash...Writing to SPI flash...done
m6_mbx_v1#
Any help is appreciated.
Thanks
egon