Cmd> lnbs SPL-1.01.nbs 50020000
:F=SPL-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF
start NB image downloadS
Load ADDR: 50020000 Length: 402C4
H***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
BTW
I want to update my sys to WM6.1
What does this mean?
I wanna to change my spl to 1.01
my herm200
IPL-1.04
SPL*2.01.olipro
I am being online to wait your answers
thanks
Related
Hello,
i try to flash bootloader 1.01 mfg according to http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
It hangs after
USB> lnbs SPL-1.01.nbs 50020000
...
start NB image download
According to other threads this behavior exists if mtty can not find the file. But the file is in the same directory as mtty.
Does anybody has an idea what is wrong?
Thanks
Andreas
did you do the "Task 32" first? and if you did did you get "Level = 00"
yes, but i only one 0
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
i got some output at this point, but i cannot remember exactly
???
? 50020000
? 00000000
????
The last line was: start NB image download
My device is SuperCID. SPL 1.09
there's your problem then; you need SPL-1.04.
I suggest you load Hard-SPL and try again...
also, might I heartily recommend that instead you download my MFG pack and use SSPL with 1.01 rather than flash it to your device... or at least use my patched 1.01 (create an NBH)
I get that message whenever I do not type the name of the file correctly, like for example, sp1-1.01.nbs instead of spL-1.01.nbs (the latter being the correct spelling). Just my two cents..
I had 1.09 before, coz I updated with full RUU versions of roms (like 2.06.502.3 cingy or 2.05.255.1 HTC), and I had no problem to downgrade to 1.01 MFG and now to 1.01 oli... I also used mtty, device was supercid, used commands was
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
If I remember correctly, task 8 automatically SW reset herm... maybe I am lucky one?
take a look at your mtty icon. Does it say MFC or does it look like a serial connector. If it says MFC then you have the wrong version of mtty.
my guess: it says "MFC"
Thanks for all your answers. At the moment a'm at work and cannot try your suggestions.
But i have some further questions:
>olipro: there's your problem then; you need SPL-1.04.
According to the wiki:
"This is a very special bootloader which can be flashed in any bootloader version BUT to flash it your Hermes must be SuperCID first..."
...can be flashed in any bootloader... what does this mean? i thougt i can flash it from 1.09. sinmae was able to do it. (or did i miss something)
>crazyut: wrong file name
i checked this several times. i typed the right name, but i do not now whats the working directory of mtty. i put the nb-file in the same directory as mtty and startet mtty from a dos-prompt. so this should be ok.
>Sleuth255: wrong version of mtty
i tried to investigate this yesterday. somebody said he has version 1.11a. i have version 0.01. it says MFS. so this should be the problem. but this is the version from the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/uploads/mtty.exe
where can i get the right version? (at google i found mttty (3 t))
Thank
Andreas
Use the mtty.exe included in this pack, mtty and nbs file in the same dir.
For some reason when I use Mtty it shows cmd instead of usb, even though i connect with usb.
this is an example of what i see
Cmd>checkimage
IPL CRC checksum = 0xC1AC9D2F
SPL CRC checksum = 0xC27E0E42
CE CRC checksum = 0x7C63DA31
ExtROM CRC checksum = 0xA47162D9
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
Yes.... something is wrong with my Radio rom (i get the No GSM error), I am trying to fix it but I think this Cmd think may be a problem.
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCEPassWord: BsaD5SeoA
Cmd>set 1e 1
Cmd>erase a0040000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a0cc0000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a0cc0000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a1940000 640000
HTCST ÚÈÒHTCE
Cmd>set 1e 0
Is it supposed to look like that?
CMD> is normal, some versions show USB some show CMD
BTW, what does "Checksum: Wait interpreter timeout
0x0" mean?
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
If you can't find it there, read:
http://forum.xda-developers.com/showthread.php?t=286755
It's long but everything you ever wanted to ask is there
drummer10630 said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
If you can't find it there, read:
http://forum.xda-developers.com/showthread.php?t=286755
It's long but everything you ever wanted to ask is there
Click to expand...
Click to collapse
Yea, I searched but I found no help, I still get No GSM, so iv'e decided to sell my 8525 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180177608274
Dear All,
Could someone please tell me how to get the SPL back to original
my jasjam
HERM100
IPL-1.00
SPL-2.10.OLipro
I try to use spl-1.01MFG_Pack.zip to flashing of unsigned code via the 'lnb'"
Cmd>task 32
Level = 0
Cmd>lnbs spl-1.01.nbs 50020000
:F=spl-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 50020000 Length: 402C4
***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
what should i do to reflash original SPL over SPL2.10.Olipro?
try following this exactly, worked for me.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
igord said:
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
Click to expand...
Click to collapse
PLEASE tell me why you are trying to do this outdated DANGEROUS operation??
Download duttys nbh tool, pack the .nb file into an RUU and do it using safe SSPL........messing with mtty can be a risky business.
Hi.
my phone mtty conection is not working...
When the mtty is open the only thing i see is: CLIENTCLIENTCLIENT
So, untill i get this thing working i can't try any more updates to bring alive my RADIO!!!
can anyone help me to configure the phone, or the MTTY?
THANXS!
cauboi25 said:
Hi.
my phone mtty conection is not working...
When the mtty is open the only thing i see is: CLIENTCLIENTCLIENT
So, untill i get this thing working i can't try any more updates to bring alive my RADIO!!!
can anyone help me to configure the phone, or the MTTY?
THANXS!
Click to expand...
Click to collapse
Did you disable Active Sync USB?
Yes, many times i check and unchek the "Allow USB..."
Which SPL do you have?
hi, my phone is:
At&t 8525
IPL 1.04
SPL 2.30
Radio (unknown, i don't remember but i gues it will be the orginal 1.54)
ROM 2.15.502.3 (04/09/07)
Thank you for reading!
You can't use MTTY with SPL 2.30, you need SPL 1.04, SPL 1.06 (no rtask command), but the best SPL to use with MTTY is 1.04.
igord said:
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
Click to expand...
Click to collapse
you should flash SPL With RUU;MTTY command work with SPl. so the MTTY commands different form different SPL
Version.
hi there folks! sadly i got a failure at attempting flashin my niki htc touch dual:
original tri color (boot)screen read:
niki 100
spl 1.16.0000
cpld-4
M04 R 1.58.16.27
B04 G25.61.30.03H
D 1.31
image version 1.31.61.10
1st step:
downloaded and run sspl 1.16 on to my device(niki)
boot screen showed:
niki 100
sspl 1.16.jump
cpld-4
2nd step:
downloaded and executed nikicustomRUU.exe "step 1" flash froze at 95%
error read:
Extracting EnterBootloader.exe
Extracting ErrorBattery.fig
Extracting ErrorUSB.fig
Extracting ModelID.fig
Cannot create ModelID.fig
Extracting Temp.bat
Extracting rapitool.exe
Extracting ROMUpdateUtility.exe
Cannot create ROMUpdateUtility.exe
Extracting RUUGetInfo.exe
Extracting RUUResource.dll
Cannot create RUUResource.dll
//
flash recovery methods used with no solution:
tried HARDboot>reeboot to original manufacturer settings FAILED!
boot screen tri color reading:
(top right)RUUNBH
(left side screen) niki100
spl 1.16.0000
cpld-4
dwnld and run MTTY 1.16 ver
follow instruction and reads:
0x73db6c2c8 ref. memory 0x00040406 memory cannot read! FAILED!
...ANY SUGGESTIONS????
best regards!
thnx!!!