I had my wizard upgraded to WM6. I was trying to upgrade it again to PDVait3 WM6. I was running the Shell tool. Even after an hr didn't go through, so I killed the process. When I reboot my wizard it stops with the bootloader screen. There is no usb at the bottom. This is what it reads
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
No usb at the bottom of the screen. Active sync doesn't connect.
Is there a way to bring back the usb connection.
Any help will be appreciated.
If you see bootloader, it is not a brick
Hi,
im not a Guru on this, but i had a similar problem.
I THink your phone is not bricked since you get to the bootloader,
ActiveSync wont work since there is no OS on your phone, but nevertheless the USB is working and you must flash a need OS through there.
Download the Wizard Love ROM, and keep it always in hand since it works 100% of the time.
Unzip it and then run: newromupdateutility_wizard_noid.exe
Thats pretty much all you need to do.
It will flash the wizard love rom, and youll get your phone up and running again in no time.
Dont stop or kill the process until its done, you will notice it hangs around 14% and 96%, it will complete , dont stop it, it takes about 10mins or more.
If you want to try a new OS, like WM6, read the first sticky on this forum http://forum.xda-developers.com/showthread.php?t=293480&page=14. I have use this method and i went from Wizard Love rom to PDAVIET4. Then from PDAVIet4 to Aku3.3v2 (but did not work). I flashed wizard love, and then using the method i went from Wizard Love to Aku 3.3v2. Works like a charm.
Please excuse my english, im spanish.
if you have any question, mail me.
I'm trying to use the shell tool but in the first step it shuld show me the current rom information and it doesn't
Is it OK? Can I proced with the upgrade?
izakref said:
I'm trying to use the shell tool but in the first step it shuld show me the current rom information and it doesn't
Is it OK? Can I proced with the upgrade?
Click to expand...
Click to collapse
Yup, don't be afraid. Currently I have faria's 3.3 ROM, and it doesn't show anything. Take any G4 ROM, load into bootloader, then connect to USB and flash. Good luck!
Thanks for the response edgardito.
I tried flashing with Wizard Love but no luck. It gives an error pretty much saying check your usb connection to the device and computer.
The problem seems to be the Wizard is not connecting to the PC. I went from AS 4.5 to 4.2 but no luck.
Is there any other thing I can try? Please let me know.
I am attaching a jpeg showing the screen. Resolution might not be that good.
check this thread worked for me to un-brick my wizard
http://forum.xda-developers.com/showthread.php?t=294107
doejohn said:
Thanks for the response edgardito.
I tried flashing with Wizard Love but no luck. It gives an error pretty much saying check your usb connection to the device and computer.
The problem seems to be the Wizard is not connecting to the PC. I went from AS 4.5 to 4.2 but no luck.
Is there any other thing I can try? Please let me know.
I am attaching a jpeg showing the screen. Resolution might not be that good.
Click to expand...
Click to collapse
This is just a boot splash, put the device in the tri-colored bootloader mode as described in the wiki. If you are getting that boot splash you should be able to get into the bootloader. Try to flash again using your carriers original ROM (whole RUU intaller) if you have it, but do not use the one from HTC's site. Try 1) In activesync disable usb connections 2) kill activesync processes (wcescomm.exe) on the PC using task manager before running the RUU.
Check your PM's
It works !!
Thanks guys for the help. The solution was so simple. Just had to put the phone in the boot loader mode by holding the camera button and pushing the power button. I loaded Wizard love on it.
Thanks to all the people who helped put together Wizard love. It has saved my a$$ so many times.
I am having trouble following the guide above. I have the Love rom and it gives me this error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have IPL 2.25.0001 same with SPL
What error?
Press Avanti to Continue....
mapero said:
What error?
Press Avanti to Continue....
Click to expand...
Click to collapse
Wow. I feel like a complete stupid ****. Haha, thanks.
im not used to these phones. I have a PPC6700 and my friend ****ed his up so im trying to help him.
Thanks
g4
thanks for the gurus for help with my mda vario
Bricked G4 Phone
I bricked my phone. I already upgraded the MDA from WM5 to WM6 and had used it for over a year when it suddenly became slow. So I attempted to do it all over again in order to have a fresh install.
Right now, when I attempt to boot, it gets stuck on the screen:
IPL 2.26.0001
SPL 2.26.0001
GSM 02.25.11
OS 2.18.0.0
I can get to the boot loader screen by pressing the camera and reset buttons.
I have tried flashing with SD but no such luck. I got an RUU file and renamed to different things and placed on the SD card, no luck still.
When I get to boot loader screen, I see the USB sign on the phone when USB is connected. But all attempts to get to the phone from PC proved futile.
PC is Windows Vista.
Thanks!
Gjutsn said:
I bricked my phone. I already upgraded the MDA from WM5 to WM6 and had used it for over a year when it suddenly became slow. So I attempted to do it all over again in order to have a fresh install.
Right now, when I attempt to boot, it gets stuck on the screen:
IPL 2.26.0001
SPL 2.26.0001
GSM 02.25.11
OS 2.18.0.0
I can get to the boot loader screen by pressing the camera and reset buttons.
I have tried flashing with SD but no such luck. I got an RUU file and renamed to different things and placed on the SD card, no luck still.
When I get to boot loader screen, I see the USB sign on the phone when USB is connected. But all attempts to get to the phone from PC proved futile.
PC is Windows Vista.
Thanks!
Click to expand...
Click to collapse
PC with vista is the problem here,but you cannot flash any custom build wm6 rom straight like that,as its a G4 device,first you'll have to get it 'HardSPL' anf than upgrade.
Download and flash official stock rom to recover back to its default status,then get it HardSPL and than upgrade to wm6.
Related
i just got a txt from at&t telling me that there is a new update adding push to talk, music, and video.
http://www.america.htc.com/support/8525/software-downloads.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this isn't wm6, right?
Un Friggin Believable!!!!
Why Why Why Why Why Why Why !!!!!!!!!!!!!!!!!!!!!
I think my friend is trying to say "No, this is not WM6".
I just got the same msg today
.:Christian:.
@ Phrozen, no its not wm6
dma1965 said:
Why Why Why Why Why Why Why !!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
If you're not going to be helpful, stfu and just ignore the post.
phrozen209 said:
i just got a txt from at&t telling me that there is a new update adding push to talk, music, and video.
http://www.america.htc.com/support/8525/software-downloads.html
this isn't wm6, right?
Click to expand...
Click to collapse
I also just received this text message but sadly this is the same WM5 ROM that was released a few weeks back. Nothing new (to people that frequent here anyhow)
They must be getting ready for the WM6 release.
Hi, I'm quite new to the forum and I do apologize if this has been covered. I just don't know where to look for the answer.
Is there away to upgrade to the ROM that was texted to me from cingular/at&t on a MAC?
TIA
iNfEk
Apparently I have a very old ROM on my 8525 and wanted to upgrade.
ROM Version: 1.34.502.1
ROM Date: 09/26/07
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
This is the first time that I have received a message to upgrade. I have NOT had the phone that long. I'd say a couple of months at the most.
iNfEk said:
Hi, I'm quite new to the forum and I do apologize if this has been covered. I just don't know where to look for the answer.
Is there away to upgrade to the ROM that was texted to me from cingular/at&t on a MAC?
TIA
iNfEk
Apparently I have a very old ROM on my 8525 and wanted to upgrade.
ROM Version: 1.34.502.1
ROM Date: 09/26/07 <=== actually looks very new
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
This is the first time that I have received a message to upgrade. I have NOT had the phone that long. I'd say a couple of months at the most.
Click to expand...
Click to collapse
You will need something like Paralells or bootcamp to do it. I would recommend thoroughly testing the connection reliability. I use a 15" MBP C2Duo all the time - but the connection can be tricky - test with some flash screen flashes or something relatively harmless. Check out www.mrvanx.org for help on flashing in general.
oops... LOL It's supposed to be 09/26/06
yes I use parallels and decided to try it on my own ATM. I'm in the middle of doing it now.
The screen has 4 colors on it (red, green, blue, white)
HERM100
IPL-1.01
HERM100
SPL-1.06
and on the white area it says USB
I decided to stop and wait for a reply
I disconnected and hit the reset button on the bottom of the phone. should I update since my ROM version is quite old?
iNfEk said:
oops... LOL It's supposed to be 09/26/06
yes I use parallels and decided to try it on my own ATM. I'm in the middle of doing it now.
The screen has 4 colors on it (red, green, blue, white)
HERM100
IPL-1.01
HERM100
SPL-1.06
and on the white area it says USB
I decided to stop and wait for a reply
I disconnected and hit the reset button on the bottom of the phone. should I update since my ROM version is quite old?
Click to expand...
Click to collapse
Yes, but only if you will read the guide I posted first. If done properly, there is little to fear. If not, then you could screw up your device. If you will read through the guide and follow each step (incliding HardSPL flashing), then GO FOR IT! If not, best leave it for another time.
Thanks, I'm looking at the site already. man these types of phones are completely different than the other types of phones that I've previously dealt with. the lingo is completely different
thanks though. I'll be sure to read the guides.
ok so i tried to follow the guide on my MBP C2Duo and when getting to the part with the Hard SPL I got an error about my connection. Am I doing something wrong?
Fair warning - I'm using my unlocked ATT/Cingular 8525 on Telstra in Oz and the upgrade removed my ability to access the internet with my Telstra SIM.
Darn it.
iNfEk said:
ok so i tried to follow the guide on my MBP C2Duo and when getting to the part with the Hard SPL I got an error about my connection. Am I doing something wrong?
Click to expand...
Click to collapse
How are running windows - paralells, bootcamp, ???
What version of windows - XP, Vista?
Does ActiveSync see the connection in windows?
Before you upgrade, there are a few issues you should know about the new version.
1.- You won't be able to access streaming media through IE,you can only access streming through pay software included (Att music, XM, etc) and you won't be able to use your own subscription to XM, you'll have to pay ATT anyway to use it.
2.- You won't be able to go back to any previous version unless you use an external bootloader
3.- The alarm goes off only when you have flight mode off, (I always turn it on at 5 pm so guys at work or customers won't bother me)
cliffelam said:
Fair warning - I'm using my unlocked ATT/Cingular 8525 on Telstra in Oz and the upgrade removed my ability to access the internet with my Telstra SIM.
Darn it.
Click to expand...
Click to collapse
Just re-enter your Telstra carrier's GPRS settings, mms as well if you use it.
Most custom roms and definately other carrier's roms will not re-customize these for you. You should save off the relevant cab files from your EXT-ROM before you flash with an "unapproved (by your carrier)" ROM.
todd_jg said:
How are running windows - paralells, bootcamp, ???
What version of windows - XP, Vista?
Does ActiveSync see the connection in windows?
Click to expand...
Click to collapse
I had to enable Start > Settings > Connections > USB to PC > Enable advanced network functionality in order for ActiveSync / WMDC to see the phone and launch. However when following the tutorial on the site that you posted I kept receiving an error stating to check my connection. I followed everything to the T and still couldn't get it to work. Finally frustrated I just tried the new ROM that was posted and I was able to successfully upgrade it.
The weird thing is that even though I received the message to allow an unaproved (by your carrier) message and allowed it... It seemed to do what it's supposed to. Meaning that I got the screen with the 4 colors and the new version number and everything but for some reason the phone would NOT restart and then eventually the software would time out.
Any ideas? am I still able to do that update?
This was done through Parallels not through bootcamp and I did everything required for Vista prior to doing the update. This version of Vista is Ultimate OEM and fully licensed. I also had to download the WMDC from microsoft as stated in the tutorial as well. That installed but same problems
Thanks
Now that I have the AT&T ROM loaded I do NOT have "enable advanced network fnctionality" enabled and I have successfully connected my MBP to my phone via bluetooth PAN. I am able to get online with that connection type and I have also been able to browse the web on the phone through IE.
So, I am not exactly sure where we are atm. It sounds like you *did* get the new ROM on the phone? Things seem to be working?
Is there more that you need? Are you just trying to figure out the USB connection to the MBP now?
Sorry, but I am confused
todd_jg said:
So, I am not exactly sure where we are atm. It sounds like you *did* get the new ROM on the phone? Things seem to be working?
Is there more that you need? Are you just trying to figure out the USB connection to the MBP now?
Sorry, but I am confused
Click to expand...
Click to collapse
yes, I did get the new ROM onto the phone but I did NOT do what you had asked me to do though. I tried to follow the tutorial BEFORE doing the AT&T ROM since that should keep everything safe from harm but it didn't work. being discouraged at all the time I spend on that side I decided to just load the ROM that AT&T told me to download and that was a success.
Will I or do I need to do the Hard SPL and other things on the site you posted earlier to make sure my info isn't messed up when modding the phone later on?
i have revived my rw6828 from the folo'ing webside
http://wiki.xda-developers.com/index.php?pagename=DeadBoot ****thx to nhocbanme for the recommendation
but i cant use RUU util to update the ROM and Bootloader
it's said uncompatible, and only detect and display my PDA with *HP Ipaq* only
**after revived my PDA, the bootloader with 2 screen
*1st is the Atom O2 Bootloader screen without display version
*2nd is the HP BootLoader screen without display version
and the rom revived is the Atom ROM
can some1 know how to get back my default HP ROM and default Bootloader?? so that im able to update it..
****hard reset for my PDA now is ATOm style, need press power and reset at the same time, after that, the screen will displayed instruction to press "call" and "hang" key..****
can any1 can create a RUU Device Software Update Utility for HP ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download here and flash as instructions. Latest ROM from HP will restore your WM5,bootloader as well as Radio.
Good Luck.
http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen
edywanwan said:
Download here and flash as instructions. Latest ROM from HP will restore your WM5,bootloader as well as Radio.
Good Luck.
http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen
Click to expand...
Click to collapse
thx, i'll try 1st
btw, do u experienced which i did?
bro..cant flash..
shown there incompatible ...>,<
**my device : hp ipaq**
williamSun said:
bro..cant flash..
shown there incompatible ...>,<
**my device : hp ipaq**
Click to expand...
Click to collapse
Yes I had flash back to official ROM dated 4Dec2007 few times. But I remain in bootloader 1.0.5 during flashing all other cooked ROMs. Total flashing already 8 times with all wm6 available here(3 ofcourse). I use sd card method for all of them except when flashing for reverting to the said HP ROM. Because I like to know the ROM content and how they perform. I flash to HP official ROM after entering bootloader first, then connect usb to PC and run the Upgrade from there.
Well I wonder if u could try to flash seperately i.e first the boot loader 1.0.5 then later either (diskimg.nb0) for 1.01.03 WWE which can be found in one of these posts, or flash with the official ROM while u are in bootloader mode.
My device HP iPaq RW6828.
Official HP 1.01.03 for sd flashing OS only http://forum.xda-developers.com/showthread.php?t=358704
For Bootloader sd flashing only
I am not sure which thread but one from those too, I attached below;
Maybe this method work.
Perhalps someone who knows might verify my proposal?
erm,my condition is I flash my bootloader using JTAG project
after that i got 2 bootloader of Atom and HP which both of them dun have version
now wat i need is flash the bootloader to HP default, any idea?
can i flash the bootloader?
but my hard reset now ATOM or HP? coz after the JTAG, i press the power and the reset will appear the command told me to press both call and hang key...
well...what can I do?
By the way......why have u been up to that extend.
Ive flash 3 version of nochbanme ROMs, wantat& kumarans and 4 helloworld clean version with no problem at all. And now with helloworld 4th version and like it very much.
Hope someone might help.
Of course the hard reset command is in such way,because it is origianally ATOM ROM. Press both softkey, not call and endcall button to hardreset.
By the way , check your boot loader by pressing both softkeys and at the same time push the softreset hole few second and release. The bootloader mode will appear. What does it reads, HP or Atom and any version number?
well, no turning back ad..anyway,thx bro.
williamSun said:
well, no turning back ad..anyway,thx bro.
Click to expand...
Click to collapse
Good luck !!
edywanwan's answer is similar to mine.
First, try to update eboot.nb0 using sd card.
Then update using language/device modified RUU to update.
To download modified hpRUU, refer the second thread in
the section "How to downgrade to WM5" in
http://forum.xda-developers.com/showthread.php?p=1831230
Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828
Hi William. How did you revive your Ipaq 6828? pls show me th etyest points and how to make a ccable. Many thanks.
roma_pop said:
Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828
Click to expand...
Click to collapse
I also the information u are looking for. Did u get them from anyone? Pls forward them to me if u have them. Thanks.
roma_pop said:
Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828
Click to expand...
Click to collapse
I also need the information u are looking for. Did u get them from anyone? Pls forward them to me if u have them. Thanks.
edywanwan said:
Yes I had flash back to official ROM dated 4Dec2007 few times. But I remain in bootloader 1.0.5 during flashing all other cooked ROMs. Total flashing already 8 times with all wm6 available here(3 ofcourse). I use sd card method for all of them except when flashing for reverting to the said HP ROM. Because I like to know the ROM content and how they perform. I flash to HP official ROM after entering bootloader first, then connect usb to PC and run the Upgrade from there.
Well I wonder if u could try to flash seperately i.e first the boot loader 1.0.5 then later either (diskimg.nb0) for 1.01.03 WWE which can be found in one of these posts, or flash with the official ROM while u are in bootloader mode.
My device HP iPaq RW6828.
Official HP 1.01.03 for sd flashing OS only http://forum.xda-developers.com/showthread.php?t=358704
For Bootloader sd flashing only
I am not sure which thread but one from those too, I attached below;
Maybe this method work.
Perhalps someone who knows might verify my proposal?
Click to expand...
Click to collapse
How should I do to make a hard reset? I can not install any rom. When I hard reset (camera + softreset) from the diagnostic manager and I do not know how to exit. If I press the two buttons - + - and soft reset will reset the wm6.1 I have installed first. If I try with the programs via pc rom me from the diagnostic manager. Sometimes freezes on the screen with HP BL 0:00:00. What can I do?
Still in this screen:
MNX Diagnostic Manager
Apr 12 2006 15:25:30
Ver. <2.5> for MNX
<D>Pure Diagnostic Mode
<B>Bluetooth Test Mod
<G>GSM Test Mode
<U> Disable DM
Enter your selection:<D>
this is my first post and as you'll learn quickly i'm a total newbie. I'm such a newbie that you'll find a picture of me on the dictionary entry of noob. anyway, on to my problem.
About a month ago i purchased a HTC Hermes, more specifically AT&T 8525. My cell phone provider is T-Mobile. I googled AT&T 8525 unlocker and sure thing found this great unlocker. Free HTC Hermes SIM & CID Unlocker *New* version v3a. Needless to say the unlocking worked perfectly. My phone ran Windows Mobile 6.0 Pro.
Fast forward about three and a half weeks ago and my friend got the same phone off ebay. He has T-Mobile too and I told him i would unlock it for him since mine worked flawlessly. Well, his phone runs on Windows Mobile 5.0 Pro. I started the update process on the computer and here's what the screens looked like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone did not ask me to press yes. Then i checked the boxes on the setup and was ready to continue
After pressing next it showed this
The progress bar remained at zero then this screen came up
http://i78.photobucket.com/albums/j120/mnn2k/phone/Untitled8.jpg
I have tried over and over again and get the same error. I have tried using different USB ports, USB cables, and two computers, both running vista but i have had no luck. now the phone is be in the tri-color mode and it won't do anything. All the screen says is
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
If i can't fix it i guess i will have to give my friend my phone and will lose a lot of money. Any help is appreciated. I tried doing a search and all the posts can't help me since i don't know much at all when it comes to phones.
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Johnston411 said:
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Click to expand...
Click to collapse
its a United States AT&T 8525. i tried flashing it with the Official HTC WM6 ROM from this link http://forum.xda-developers.com/showthread.php?t=316726 but now the progress bar goes to 11 then it gives me the same error. I'll have to try it on from a XP. on the Readme it says there might me a problem with ports. How do i check if there is a problem with that.
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/RomCode/TMobile/Hermes_WM6_TMUK_3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Johnston411 said:
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
Click to expand...
Click to collapse
thanks for the help, i played around and finally found a ROM that installed, Schaps 4.31 WWE.
scousemartin said:
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/...3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Click to expand...
Click to collapse
i found Schaps ROM and that worked. thanks for all the help. In your opinion which is the best cooked ROM.
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
ultramag69 said:
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
Click to expand...
Click to collapse
Okay, i'll stay away from that. but i still can't flash HardSPL on my phone. it gives me error 260.
1) i uncheck the allow USB connections on WMDC
2). i run the SPL-HERMES.exe on my phone and connect to usb.
3). run ruu_wrapper.exe
I also read the guide here http://www.mrvanx.org/hermes_guide/hardspl and nothing.
Then i tried using the Unlocker but that gives me the same error 260. i have tried the SD card method but mine is a 4gb microSDHC. my phone recognizes the card and i renamed the .nbh file. So i launch spl-herm.exe and nothing happens. i do hit the power button. still nothing.
When running SSPL-HERM.exe it says i have SPL-1.09.ds. when i do a manual bootload it says i have SPL-1.40.Olipro
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
scousemartin said:
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Click to expand...
Click to collapse
renamed from HermesUnlocker_v3a.nbh to HERMIMG.nbh
ultramag said:
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
Click to expand...
Click to collapse
i did format it with fat32, quick format and normal format, default allocation size and 4096 bytes. i know i said i am a newbie when it comes to phones but i'm not one when it comes to computers. i would rather have Hard-SPL flashing first though, and also i have no Radio ROM currently on the phone.
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
ultramag69 said:
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
Click to expand...
Click to collapse
yeah i kinda thought that was the case. Since the unlocker replaces the Radio ROM, but the frustrating thing is that the HardSPL isn't flashing. Stupid VISTA. Let's say i am able to flash HardSPL. can't i flash a Radio ROM only? or the original ROM found on the wiki.
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
ultramag69 said:
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
Click to expand...
Click to collapse
WOW, first try on XP and HardSPL flashed like that (snap).
Any help would really appreciated, of course donations would be there also for anyone who can help me. Im badly stuck in here. Im reading the forums for the whole, still no luck to solve my problem.
Im stuck, the error is this:
ERROR 244 INVALID ID
I have flashed my rom to "Athena_SPL1.2_WWE_WM6.1_R4.0-MiChY", the update breaks at 98%. Now i have only garbage screen, and cant flash anything. But i can load in the bootloader. I think the previous rom is gone.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ive tried everything, also tried the mtty/mac1 method of cmonex but still got errors there.
Im stuck at "Fail to synchronize with the host (1)"
Anyone can help me, im very glad to here from the experts here. Doantions for any help.
thnak god. ive solved my own problems. use the mtty 1.16 btw.
well glad you solved it
though i'm sure the issue with mtty_0513 could have been solved by placing mtty and the bin file in C: root (as mentioned in my instructions)
Please help me, too! I have x7501 with SPL-v1.10RP00 and HAD HTC current ship ROM.
I was trying to run AthenaUnlocker from Olipro and it didn't work, so I tried the Athenawrapper and it doesn't work, either. Both immediately went to 7%and gave Error [270].
I tried HTC official ROM to see if my device could be flashed at all and it completed successfully.
I tried unlockers a couple more times and tried to upgrade radio to 1.57 or 1.58 and had no success. I accidentally clicked the AthenaUpdater file from AP4 and my device suddenly showed SPL-v3.00 Olipro (I think those were the numbers) and looked like it was going to update. As I watched the folder where AP4 extracted some files very slowly, a pop-up message showed "****sticks" and asked if I had answered "yes" to any messages or made sure my device was synchronized with Activesync. My device suddenly re-booted and was black screen with the green around the joystick lit.
I tried to download the Official HTC rom again and it got to 1% and said Invalid ModelID.
I tried to use cmonex mtty program to change wifi and modelid and it shows "FF" after I typed task 16 0. None of the other unlock, radio or AP4 flash programs will work either, giving connection errors [260] or [300].
The device goes through the hard-reset routine fine, but doesn't boot into anything except the Bootloader. Is there a ROM I can flash that will allow download without checking the ModelID or something I can do with mtty?
Please help!!!
dennistaylor said:
Please help me, too! I have x7501 with SPL-v1.10RP00 and HAD HTC current ship ROM.
I was trying to run AthenaUnlocker from Olipro and it didn't work, so I tried the Athenawrapper and it doesn't work, either. Both immediately went to 7%and gave Error [270].
Click to expand...
Click to collapse
did you have the device synced in windows mobile when running the unlockers (as the instructions clearly state it needs to be)?
if not, that's where the issue started...
but anyway, I'm online on MSN
CMONEX is the best and was very patient with my ignorance of Athena upgrading! CMONEX took some time to help get my Athena x7501 running again and now it's ready to serve me into the future.
PM CMONEX if you have any issues that you can't handle on your own!
reading this thread makes me want to donate to cmonex just because of his good attitude towards noobs. i probably need to wait for a couple of months until my paypal gets reloaded again, lol.
i would have asked for help from cmonex if not for tootallk2000 guiding me all the way through the (panicky) process. he also had been very patient with me.
anyway, i just wanted to thank people like tootallk2000 and cmonex for their support to the rest of us.
ciao!
WGonzales[dC] said:
Any help would really appreciated, of course donations would be there also for anyone who can help me. Im badly stuck in here. Im reading the forums for the whole, still no luck to solve my problem.
Im stuck, the error is this:
ERROR 244 INVALID ID
I have flashed my rom to "Athena_SPL1.2_WWE_WM6.1_R4.0-MiChY", the update breaks at 98%. Now i have only garbage screen, and cant flash anything. But i can load in the bootloader. I think the previous rom is gone.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Ive tried everything, also tried the mtty/mac1 method of cmonex but still got errors there.
Im stuck at "Fail to synchronize with the host (1)"
Anyone can help me, im very glad to here from the experts here. Doantions for any help.
Click to expand...
Click to collapse
I flashed with the 6.5 rom but did not upgrade my spl previously. Once the phone restarted the video signal looked scrambled on the screen. I tried a hard reset but the same thing so I went into the bootloader and tried to load my original rom but got the 244 error.
Now I am experiencing the same issue, I tried a few versions of mtty and keep getting the "fail to synchronize with the host" error. I also do not have my original mac address(dopod u1000-not on batter door) but couldnt attempt to use an alternate mac because of this error.
I havent been able to try loading from the micro sd card because i wont have a reader till tomorrow. Is there anything else I can do to fix this?
WGonzales[dC] said:
Any help would really appreciated, of course donations would be there also for anyone who can help me. Im badly stuck in here. Im reading the forums for the whole, still no luck to solve my problem.
Im stuck, the error is this:
ERROR 244 INVALID ID
I have flashed my rom to "Athena_SPL1.2_WWE_WM6.1_R4.0-MiChY", the update breaks at 98%. Now i have only garbage screen, and cant flash anything. But i can load in the bootloader. I think the previous rom is gone.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Ive tried everything, also tried the mtty/mac1 method of cmonex but still got errors there.
Im stuck at "Fail to synchronize with the host (1)"
Anyone can help me, im very glad to here from the experts here. Doantions for any help.
Click to expand...
Click to collapse
you have exactly same problem with mine.
just follow step by step instruction, it works
http://forum.xda-developers.com/showthread.php?t=387454&page=12
just watch the file bin you create (put it in a same folder with mtty).
Regards,
you have exactly same problem with mine.
just follow step by step instruction, it works
http://forum.xda-developers.com/show...387454&page=12
just watch the file bin you create (put it in a same folder with mtty).
*** I follow thats but after hit enter key ===>not see "Cmd>" text
How can you solve it? I can't find any bin files? How can I get it or create, I have same problem too.
tmthomas said:
How can you solve it? I can't find any bin files? How can I get it or create, I have same problem too.
Click to expand...
Click to collapse
This only helps if your unit only shows IPL and SPL ver only. No ATHE100 on the screen means you got a corrupted model id/wifi ... plz read this post how to create a bin file : http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
Wish you all the best.
drkxdadvlp said:
you have exactly same problem with mine.
just follow step by step instruction, it works
http://forum.xda-developers.com/show...387454&page=12
just watch the file bin you create (put it in a same folder with mtty).
*** I follow thats but after hit enter key ===>not see "Cmd>" text
Click to expand...
Click to collapse
I get the same problems ,It can't be flashed any ROM any more
I have a HTC Advantage X7500 with IPL v2.02 and SPL v1.20 Olipro. I have exactly the same problem. Tried different USB cables. Tried another workstation. Tried at work, even reinstalled another computer with Windows XP Professional with SP2 because I red somewhere that it will only work with that version. Also tried different MTTY versions, but I just cannot get this connected. When updating, it will stop after 1%. The X7500 will reboot and showing a scrambled screen. I cannot figure out what to do anymore. Think I red the instructions for 50 times already. If anyone know why and the solution for it, please let us know!
Because the lack of response, I've decided to send the phone to Dynafix, a company in the Netherlands specialised in repairing phones. Warranty past april this year. What a bummer. Received the repair costs. This software upgrade was not possible and they have to change the complete system board, about 550 Euro's! Guess I really have a bricked device here. If anyone can help me with a system board, let me know.
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
omegafunky said:
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
Click to expand...
Click to collapse
If I were you I would use the Titan relocker to default to your stock bootloader. Then install the Stock Sprint ROM from my HTC unlock tools directory. Now after that is done reinstall the olipro 2.40 bootloader. You need to be booted up to a functioning WM OS. Make sure memory card is removed and follow this. Run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone.
Now you can flash A GPS RADIO 3.35.04, 3.42.40, OR 3.42.50 AND THEN A CUSTOM ROM using an RUU or by using the MicroSD method. Hope this helps. But your problems sound like a bad flash.
PS: If you jumped into custom ROM flashing not knowing what you are doing. That is on you.. This thread should not be in this subforum to begin with so if you still cant get up and running I will gladly have it moved.
Thanks RyanMogul6800
1.- can you post the Olipro 2.40 because I found one in this link (http://forum.xda-developers.com/showpost.php?p=1941281&postcount=6) but I dont know if is the correct version, I leave you a pics abouy my problem
2.- you say that I need to be running windows mobile to apply again the Olipro or it can be apply in radio mode?
This is when I instal the multicarrier light version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This others is when I tray ti install a sprint ROM
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
RyanMogul6800 said:
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
Click to expand...
Click to collapse
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
omegafunky said:
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
Click to expand...
Click to collapse
No problem buddy, I am here to help. And your English is very good. I think by fit you mean fix, but I know what you mean.
Also I just released my Carrierless versions. Click my name and goto my homepage then look at the folders on the right of the 4shared page that comes up. Also if you want to try my 21054 6.1 builds they are also accessible by clicking on the "other share space" link. Versions 1.5 and 3.0, Zero G is another Carrierless version. Very light on resources. But Zero G is stripped bare. Meant for enthusiasts only.
1.5 is the same as 1.1 just a newer build. 3.0 is the same as 2.0 just a newer build.
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
Yea remove the memory card and only use a main usb port on your Computer (port built into the motherboard, not a hub)
Also I forgot to mention, after each bad flash use the Exitbl.exe to get out of bootloader. Then re-put it back in bootloader manually to try again. Use Winrar, or 7zip to extract the contents of olipro 2.40 into a folder to get the Exitbl.exe.
Also since you dont have a functioning Windows Mobile OS to use Synced Active Sync (green icon in taskbar) are you trying to flash the Stock Sprint ROM with Active Sync connections disabled in the PC's taskbar (icon should not be green, should have a little x over a white icon.
I noticed in your screenshots it doesnt look like you are using Windows XP..
If you are using Vista, or Windows 7 then I cant help you. Those are not recommended operating systems for phone flashing..
You might have to use a friends computer with Windows XP and install active sync 4.5 on it. etc..
Im usin windows xp, well i cant do that the "TitanRelocker" run very well, i have the mogul coneccted to the pc, and run the "TitanRelocker" I press a key and later send me this menssage, I choose yes a lot of times but always send me the same menssage in bootloader mode
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and get the Stock Sprint ROM to flash. And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
RyanMogul6800 said:
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and . And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
Click to expand...
Click to collapse
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
Click to expand...
Click to collapse
Ok im done.. I guarentee if I had the phone in my hands I could get it fixed in 15 minutes tops..
This large disclaimer is in the beginning of my ROM threads for a reason..
Make sure you know what you are doing before you attempt to flash a Custom ROM onto your device!!
I had the same issue with flashing my phone.
I could not for the life of me get a radio to flash using a usb connection.
I had to use the non-highspeed 2gig SD card to flash my radio and then my first ROM. Worked first time. No fooling with computers that are not compatible with the flashing process.
use the search function, you will find the instructions....
cheers.......
and wow Ryan - you are extremely nice to have helped him along this far. You need to make a clear trouble shooting wiki page, and then point people in that direction.
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_ 4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION.
Click to expand...
Click to collapse
Yea and another possibility is that you could of tried restarting your computer and trying again. Sometimes when you have a bad flash or errors the RUU utilities refuse to work until a reboot of the Computer.
anyone know where I can find the HTC Mogul Sprint ROM 2.16.651.0???
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
drewcam888 said:
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
Click to expand...
Click to collapse
I am the only one that tried to help this person from the moment he started this thread. If you didnt notice I tried everything under the sun. If this person does end up getting it, it will not be because of you. It will be because of what I taught him already finally getting through.
Drew, you do not help anyone. You put your in your two cents in lots of threads usually short answers that only mislead someone further. All someone has to do is click your name, and find all posts by this user and sit back read and say OMG what an idiot.
You have yet to make any contributions that help out any forum. You are just a bantering PITA. You say useless garbage to just up your post count.
I on the other hand, help people. I spend a lot of time on my ROMs and software. I dont use Navizon links to make money off of people like you try to do.
You think you are invincible or something buddy? Say one more thing about me and you will be repramanded or worse. Trust me on that..
Again I will state for you omegafunky. If you want step by step help pm and I can chat with you. I can help you fix your issues.
And wow Ryan thats an earful. And wow why the need to feel you have to threaten people.