Revived HP 6828 but.. - iPAQ rw6828, XDA Atom ROM Development

i have revived my rw6828 from the folo'ing webside
http://wiki.xda-developers.com/index.php?pagename=DeadBoot ****thx to nhocbanme for the recommendation
but i cant use RUU util to update the ROM and Bootloader
it's said uncompatible, and only detect and display my PDA with *HP Ipaq* only
**after revived my PDA, the bootloader with 2 screen
*1st is the Atom O2 Bootloader screen without display version
*2nd is the HP BootLoader screen without display version
and the rom revived is the Atom ROM
can some1 know how to get back my default HP ROM and default Bootloader?? so that im able to update it..
****hard reset for my PDA now is ATOm style, need press power and reset at the same time, after that, the screen will displayed instruction to press "call" and "hang" key..****
can any1 can create a RUU Device Software Update Utility for HP ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Download here and flash as instructions. Latest ROM from HP will restore your WM5,bootloader as well as Radio.
Good Luck.
http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen

edywanwan said:
Download here and flash as instructions. Latest ROM from HP will restore your WM5,bootloader as well as Radio.
Good Luck.
http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen
Click to expand...
Click to collapse
thx, i'll try 1st
btw, do u experienced which i did?

bro..cant flash..
shown there incompatible ...>,<
**my device : hp ipaq**

williamSun said:
bro..cant flash..
shown there incompatible ...>,<
**my device : hp ipaq**
Click to expand...
Click to collapse
Yes I had flash back to official ROM dated 4Dec2007 few times. But I remain in bootloader 1.0.5 during flashing all other cooked ROMs. Total flashing already 8 times with all wm6 available here(3 ofcourse). I use sd card method for all of them except when flashing for reverting to the said HP ROM. Because I like to know the ROM content and how they perform. I flash to HP official ROM after entering bootloader first, then connect usb to PC and run the Upgrade from there.
Well I wonder if u could try to flash seperately i.e first the boot loader 1.0.5 then later either (diskimg.nb0) for 1.01.03 WWE which can be found in one of these posts, or flash with the official ROM while u are in bootloader mode.
My device HP iPaq RW6828.
Official HP 1.01.03 for sd flashing OS only http://forum.xda-developers.com/showthread.php?t=358704
For Bootloader sd flashing only
I am not sure which thread but one from those too, I attached below;
Maybe this method work.
Perhalps someone who knows might verify my proposal?

erm,my condition is I flash my bootloader using JTAG project
after that i got 2 bootloader of Atom and HP which both of them dun have version
now wat i need is flash the bootloader to HP default, any idea?
can i flash the bootloader?
but my hard reset now ATOM or HP? coz after the JTAG, i press the power and the reset will appear the command told me to press both call and hang key...

well...what can I do?
By the way......why have u been up to that extend.
Ive flash 3 version of nochbanme ROMs, wantat& kumarans and 4 helloworld clean version with no problem at all. And now with helloworld 4th version and like it very much.
Hope someone might help.
Of course the hard reset command is in such way,because it is origianally ATOM ROM. Press both softkey, not call and endcall button to hardreset.
By the way , check your boot loader by pressing both softkeys and at the same time push the softreset hole few second and release. The bootloader mode will appear. What does it reads, HP or Atom and any version number?

well, no turning back ad..anyway,thx bro.

williamSun said:
well, no turning back ad..anyway,thx bro.
Click to expand...
Click to collapse
Good luck !!

edywanwan's answer is similar to mine.
First, try to update eboot.nb0 using sd card.
Then update using language/device modified RUU to update.
To download modified hpRUU, refer the second thread in
the section "How to downgrade to WM5" in
http://forum.xda-developers.com/showthread.php?p=1831230

Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828

Hi William. How did you revive your Ipaq 6828? pls show me th etyest points and how to make a ccable. Many thanks.

roma_pop said:
Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828
Click to expand...
Click to collapse
I also the information u are looking for. Did u get them from anyone? Pls forward them to me if u have them. Thanks.

roma_pop said:
Can somebody show picture with description where in RW6828 is pinouts for JTAG,
i mean where it exactly TCK, TDI, TD0, TMS ???
I need to made JTAG , but didn't find pinout for rw6828.
Please help ..
picture rw6828
Click to expand...
Click to collapse
I also need the information u are looking for. Did u get them from anyone? Pls forward them to me if u have them. Thanks.

edywanwan said:
Yes I had flash back to official ROM dated 4Dec2007 few times. But I remain in bootloader 1.0.5 during flashing all other cooked ROMs. Total flashing already 8 times with all wm6 available here(3 ofcourse). I use sd card method for all of them except when flashing for reverting to the said HP ROM. Because I like to know the ROM content and how they perform. I flash to HP official ROM after entering bootloader first, then connect usb to PC and run the Upgrade from there.
Well I wonder if u could try to flash seperately i.e first the boot loader 1.0.5 then later either (diskimg.nb0) for 1.01.03 WWE which can be found in one of these posts, or flash with the official ROM while u are in bootloader mode.
My device HP iPaq RW6828.
Official HP 1.01.03 for sd flashing OS only http://forum.xda-developers.com/showthread.php?t=358704
For Bootloader sd flashing only
I am not sure which thread but one from those too, I attached below;
Maybe this method work.
Perhalps someone who knows might verify my proposal?
Click to expand...
Click to collapse
How should I do to make a hard reset? I can not install any rom. When I hard reset (camera + softreset) from the diagnostic manager and I do not know how to exit. If I press the two buttons - + - and soft reset will reset the wm6.1 I have installed first. If I try with the programs via pc rom me from the diagnostic manager. Sometimes freezes on the screen with HP BL 0:00:00. What can I do?
Still in this screen:
MNX Diagnostic Manager
Apr 12 2006 15:25:30
Ver. <2.5> for MNX
<D>Pure Diagnostic Mode
<B>Bluetooth Test Mod
<G>GSM Test Mode
<U> Disable DM
Enter your selection:<D>

Related

Help, thnk I bricked my G4 Wizard

I had my wizard upgraded to WM6. I was trying to upgrade it again to PDVait3 WM6. I was running the Shell tool. Even after an hr didn't go through, so I killed the process. When I reboot my wizard it stops with the bootloader screen. There is no usb at the bottom. This is what it reads
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
No usb at the bottom of the screen. Active sync doesn't connect.
Is there a way to bring back the usb connection.
Any help will be appreciated.
If you see bootloader, it is not a brick
Hi,
im not a Guru on this, but i had a similar problem.
I THink your phone is not bricked since you get to the bootloader,
ActiveSync wont work since there is no OS on your phone, but nevertheless the USB is working and you must flash a need OS through there.
Download the Wizard Love ROM, and keep it always in hand since it works 100% of the time.
Unzip it and then run: newromupdateutility_wizard_noid.exe
Thats pretty much all you need to do.
It will flash the wizard love rom, and youll get your phone up and running again in no time.
Dont stop or kill the process until its done, you will notice it hangs around 14% and 96%, it will complete , dont stop it, it takes about 10mins or more.
If you want to try a new OS, like WM6, read the first sticky on this forum http://forum.xda-developers.com/showthread.php?t=293480&page=14. I have use this method and i went from Wizard Love rom to PDAVIET4. Then from PDAVIet4 to Aku3.3v2 (but did not work). I flashed wizard love, and then using the method i went from Wizard Love to Aku 3.3v2. Works like a charm.
Please excuse my english, im spanish.
if you have any question, mail me.
I'm trying to use the shell tool but in the first step it shuld show me the current rom information and it doesn't
Is it OK? Can I proced with the upgrade?
izakref said:
I'm trying to use the shell tool but in the first step it shuld show me the current rom information and it doesn't
Is it OK? Can I proced with the upgrade?
Click to expand...
Click to collapse
Yup, don't be afraid. Currently I have faria's 3.3 ROM, and it doesn't show anything. Take any G4 ROM, load into bootloader, then connect to USB and flash. Good luck!
Thanks for the response edgardito.
I tried flashing with Wizard Love but no luck. It gives an error pretty much saying check your usb connection to the device and computer.
The problem seems to be the Wizard is not connecting to the PC. I went from AS 4.5 to 4.2 but no luck.
Is there any other thing I can try? Please let me know.
I am attaching a jpeg showing the screen. Resolution might not be that good.
check this thread worked for me to un-brick my wizard
http://forum.xda-developers.com/showthread.php?t=294107
doejohn said:
Thanks for the response edgardito.
I tried flashing with Wizard Love but no luck. It gives an error pretty much saying check your usb connection to the device and computer.
The problem seems to be the Wizard is not connecting to the PC. I went from AS 4.5 to 4.2 but no luck.
Is there any other thing I can try? Please let me know.
I am attaching a jpeg showing the screen. Resolution might not be that good.
Click to expand...
Click to collapse
This is just a boot splash, put the device in the tri-colored bootloader mode as described in the wiki. If you are getting that boot splash you should be able to get into the bootloader. Try to flash again using your carriers original ROM (whole RUU intaller) if you have it, but do not use the one from HTC's site. Try 1) In activesync disable usb connections 2) kill activesync processes (wcescomm.exe) on the PC using task manager before running the RUU.
Check your PM's
It works !!
Thanks guys for the help. The solution was so simple. Just had to put the phone in the boot loader mode by holding the camera button and pushing the power button. I loaded Wizard love on it.
Thanks to all the people who helped put together Wizard love. It has saved my a$$ so many times.
I am having trouble following the guide above. I have the Love rom and it gives me this error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have IPL 2.25.0001 same with SPL
What error?
Press Avanti to Continue....
mapero said:
What error?
Press Avanti to Continue....
Click to expand...
Click to collapse
Wow. I feel like a complete stupid ****. Haha, thanks.
im not used to these phones. I have a PPC6700 and my friend ****ed his up so im trying to help him.
Thanks
g4
thanks for the gurus for help with my mda vario
Bricked G4 Phone
I bricked my phone. I already upgraded the MDA from WM5 to WM6 and had used it for over a year when it suddenly became slow. So I attempted to do it all over again in order to have a fresh install.
Right now, when I attempt to boot, it gets stuck on the screen:
IPL 2.26.0001
SPL 2.26.0001
GSM 02.25.11
OS 2.18.0.0
I can get to the boot loader screen by pressing the camera and reset buttons.
I have tried flashing with SD but no such luck. I got an RUU file and renamed to different things and placed on the SD card, no luck still.
When I get to boot loader screen, I see the USB sign on the phone when USB is connected. But all attempts to get to the phone from PC proved futile.
PC is Windows Vista.
Thanks!
Gjutsn said:
I bricked my phone. I already upgraded the MDA from WM5 to WM6 and had used it for over a year when it suddenly became slow. So I attempted to do it all over again in order to have a fresh install.
Right now, when I attempt to boot, it gets stuck on the screen:
IPL 2.26.0001
SPL 2.26.0001
GSM 02.25.11
OS 2.18.0.0
I can get to the boot loader screen by pressing the camera and reset buttons.
I have tried flashing with SD but no such luck. I got an RUU file and renamed to different things and placed on the SD card, no luck still.
When I get to boot loader screen, I see the USB sign on the phone when USB is connected. But all attempts to get to the phone from PC proved futile.
PC is Windows Vista.
Thanks!
Click to expand...
Click to collapse
PC with vista is the problem here,but you cannot flash any custom build wm6 rom straight like that,as its a G4 device,first you'll have to get it 'HardSPL' anf than upgrade.
Download and flash official stock rom to recover back to its default status,then get it HardSPL and than upgrade to wm6.

Hp6828 Wm6

As we can see , a lot WM6 , WM6.1 Rom for HP6828 & HP6818. After upgrade some people wanted to back to WM5 but facing the problem .( I also one of them ). After search through the net , I get a solution from someone , this is due to Model ID been overwrite . I already modify my Revision 2 ROM and add the HP Model ID in . For those people who want to flash the HP6828 back to WM5 , you may flash my revision 2 rom . It will repair your Model ID . After that just download the HP original wm5 rom and you will be able to flash it .
1 . Downgrade your bootloader to Version 1.01 from link
http://h20000.www2.hp.com/bizsuppor...&swLang=8&mode=2&taskId=135&swItem=ip-45503-1
2 . download the zip file from the mediafire link.
3 . unzip the file you will see 6 file inside , diskimage_Ver.nb0 , Device Software Update Utility.exe , EBOOT.nb0 , ExtendedRom.img , nova_pda_033105.mot and vl1d_pda_Ver.mot.
4 . copy diskimage_Ver.nb0 , Device Software Update Utility.exe , EBOOT.nb0 , ExtendedRom.img , nova_pda_033105.mot , vl1d_pda_Ver.mot to " C:\Windows\temp "
5 . Press both soft key enter your phone to bootloader mode . than run Device Software Update Utility.exe . Follow screen instruction click next and upgrade.
6 . Now the rom upgrade in progress , it take about 20 minute , until it reach congratulation page than click exit . Done it will automatic clean boot and reset to factory default.
HP6828 WM6 (Revision 2)
http://www.mediafire.com/?2tmky0dznzn
Special Note:
This is NOT an OFFICIAL ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
I've flash HP6828 WM6 by pda-hack.net, how can i downgrade bootloader to version 1.01 ?
just download the hp rom utility pgrogram link that I post . Before start the program , press ang hold your phone both soft key bottom , than reset untill the boot loader screen come out. than release the soft key . Connect the data cable and start the HP Utility.
I've followed your introduce , but RUU got error :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm sure my device fully attached to cable...
I've try it againt but have same problem.
Have any method to downgrade BL to 1.0.1 ???
Under bootloader mode , connect data cable . Check under PC device manager , can you see " HP USB sync " , If no that may be your pc detect the phone to something else . Just find the device and remove it . after that refresh the device manager and your pc will re detect and correct the problem.
I had see " HP USB sync " in PC device manager. It's still doesn't work.
I've up your ROM via miniSD card...
Have some problem : Wireless Manager, Camera doesn't work ... Any pacth is needed ?
After you unzip the file , there is one file call Extrom.cab , copy and past it in your storage card and run it. This will fix all .
i have some question for imei is show in sysinfo is match with pda ?
nhocbanme said:
I had see " HP USB sync " in PC device manager. It's still doesn't work.
I've up your ROM via miniSD card...
Have some problem : Wireless Manager, Camera doesn't work ... Any pacth is needed ?
Click to expand...
Click to collapse
Did you downgrade your HP 6828?
How can you upgrade the Rom via miniSD card? would you mind explain more or give your steps to us?
Thankyou very much.
animation said:
Did you downgrade your HP 6828?
How can you upgrade the Rom via miniSD card? would you mind explain more or give your steps to us?
Thankyou very much.
Click to expand...
Click to collapse
No i didn't downgrade my device.
Because my BLoader is 1.0.5 so that i just flash ROM by miniSD card only.
This is step by step to upgrade the Rom via miniSD card :
- First you must have .nb0 ROM had cut first 12 bytes by WinHex.
- Rename it to diskimg.nb0, and copy to miniSD card (root folder).
- Go to Bloader : press "_" both key and soft-reset untill show HP PBL.
- It will auto flash your ROM, it's take approximate 15' - 20' then auto hardreset.
Sorry because i'm bad English
nhocbanme said:
No i didn't downgrade my device.
Because my BLoader is 1.0.5 so that i just flash ROM by miniSD card only.
This is step by step to upgrade the Rom via miniSD card :
- First you must have .nb0 ROM had cut first 12 bytes by WinHex.
- Rename it to diskimg.nb0, and copy to miniSD card (root folder).
- Go to Bloader : press "_" both key and soft-reset untill show HP PBL.
- It will auto flash your ROM, it's take approximate 15' - 20' then auto hardreset.
Sorry because i'm bad English
Click to expand...
Click to collapse
Thankyou for your asking.
Would you mind upload your dishimg.nb0 to us (successful one ) Thankyou.
I have another question.
What are the differences between this Rom and the Atom Exce Rom?
Here is the ROM had cut first 12 bytes.
http://www.mediafire.com/?9qmtogqs1kv
I've flash successful with my device.
I think the diferences between this ROM and the ATOM Exce ROM is very little :
- Just have a HP bootsceen and new phonepad...
Cool man. Try flashing for HP logo again. Thanks
After flash new rom, I find that it has problem about wireless manager and the HP logo on boot screen come after O2 screen. These may because I already get WM6 atom exec rom and I flash the upper rom again. So, I decide to flash back to Roma_pop atom rom. Goodluck
nhocbanme,
i tried the minisd flashing method, but, nothing seemed to happen, so i resetted my ipaq, now it's completely bricked,
anyway to revive it? i tried to run the update file via my computer, but no luck.
nhocbanme said:
Here is the ROM had cut first 12 bytes.
http://www.mediafire.com/?9qmtogqs1kv
I've flash successful with my device.
I think the diferences between this ROM and the ATOM Exce ROM is very little :
- Just have a HP bootsceen and new phonepad...
Click to expand...
Click to collapse
Thankyou for you asking.
Do you have the screen shot of the the HP boot screen?
Sorry for my troublesome.
The HP boot sceen is similar in WM5, but the HP boot sceen come after O2 boot sceen. But I think the boot sceen isn't important, I like the ROM no need any patch and all function work well...
klikman said:
nhocbanme,
i tried the minisd flashing method, but, nothing seemed to happen, so i resetted my ipaq, now it's completely bricked,
anyway to revive it? i tried to run the update file via my computer, but no luck.
Click to expand...
Click to collapse
You can go to BLoader by this steps :
1. Re-copy the ROM has work with your device to miniSD card (diskimg.nb0)
2. Unload the battery,
3. Press "_" both key, don't loose.
4. Load the battery and softreset (stylus)
Waiting the white screen, and reflash.
Goodluck !!!
nhocbanme said:
The HP boot sceen is similar in WM5, but the HP boot sceen come after O2 boot sceen. But I think the boot sceen isn't important, I like the ROM no need any patch and all function work well...
Click to expand...
Click to collapse
Thankyou for you quick answering
Does it need to install the ExtROM?
Have you found any bugs in the Rom. For example, the camera or FM Radio.
Yes, it's needed install ExtROM.
This ROM is same with Atom exce rom from this topic : http://forum.xda-developers.com/showthread.php?goto=newpost&t=334917
And i think this ROM isn't have any bugs : camera and FM radio work well (after install ExtROM.cab)

Original ROM for titan in problems???

well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
omegafunky said:
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
Click to expand...
Click to collapse
If I were you I would use the Titan relocker to default to your stock bootloader. Then install the Stock Sprint ROM from my HTC unlock tools directory. Now after that is done reinstall the olipro 2.40 bootloader. You need to be booted up to a functioning WM OS. Make sure memory card is removed and follow this. Run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone.
Now you can flash A GPS RADIO 3.35.04, 3.42.40, OR 3.42.50 AND THEN A CUSTOM ROM using an RUU or by using the MicroSD method. Hope this helps. But your problems sound like a bad flash.
PS: If you jumped into custom ROM flashing not knowing what you are doing. That is on you.. This thread should not be in this subforum to begin with so if you still cant get up and running I will gladly have it moved.
Thanks RyanMogul6800
1.- can you post the Olipro 2.40 because I found one in this link (http://forum.xda-developers.com/showpost.php?p=1941281&postcount=6) but I dont know if is the correct version, I leave you a pics abouy my problem
2.- you say that I need to be running windows mobile to apply again the Olipro or it can be apply in radio mode?
This is when I instal the multicarrier light version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This others is when I tray ti install a sprint ROM
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
RyanMogul6800 said:
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
Click to expand...
Click to collapse
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
omegafunky said:
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
Click to expand...
Click to collapse
No problem buddy, I am here to help. And your English is very good. I think by fit you mean fix, but I know what you mean.
Also I just released my Carrierless versions. Click my name and goto my homepage then look at the folders on the right of the 4shared page that comes up. Also if you want to try my 21054 6.1 builds they are also accessible by clicking on the "other share space" link. Versions 1.5 and 3.0, Zero G is another Carrierless version. Very light on resources. But Zero G is stripped bare. Meant for enthusiasts only.
1.5 is the same as 1.1 just a newer build. 3.0 is the same as 2.0 just a newer build.
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
Yea remove the memory card and only use a main usb port on your Computer (port built into the motherboard, not a hub)
Also I forgot to mention, after each bad flash use the Exitbl.exe to get out of bootloader. Then re-put it back in bootloader manually to try again. Use Winrar, or 7zip to extract the contents of olipro 2.40 into a folder to get the Exitbl.exe.
Also since you dont have a functioning Windows Mobile OS to use Synced Active Sync (green icon in taskbar) are you trying to flash the Stock Sprint ROM with Active Sync connections disabled in the PC's taskbar (icon should not be green, should have a little x over a white icon.
I noticed in your screenshots it doesnt look like you are using Windows XP..
If you are using Vista, or Windows 7 then I cant help you. Those are not recommended operating systems for phone flashing..
You might have to use a friends computer with Windows XP and install active sync 4.5 on it. etc..
Im usin windows xp, well i cant do that the "TitanRelocker" run very well, i have the mogul coneccted to the pc, and run the "TitanRelocker" I press a key and later send me this menssage, I choose yes a lot of times but always send me the same menssage in bootloader mode
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and get the Stock Sprint ROM to flash. And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
RyanMogul6800 said:
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and . And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
Click to expand...
Click to collapse
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
Click to expand...
Click to collapse
Ok im done.. I guarentee if I had the phone in my hands I could get it fixed in 15 minutes tops..
This large disclaimer is in the beginning of my ROM threads for a reason..
Make sure you know what you are doing before you attempt to flash a Custom ROM onto your device!!
I had the same issue with flashing my phone.
I could not for the life of me get a radio to flash using a usb connection.
I had to use the non-highspeed 2gig SD card to flash my radio and then my first ROM. Worked first time. No fooling with computers that are not compatible with the flashing process.
use the search function, you will find the instructions....
cheers.......
and wow Ryan - you are extremely nice to have helped him along this far. You need to make a clear trouble shooting wiki page, and then point people in that direction.
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_ 4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION.
Click to expand...
Click to collapse
Yea and another possibility is that you could of tried restarting your computer and trying again. Sometimes when you have a bad flash or errors the RUU utilities refuse to work until a reboot of the Computer.
anyone know where I can find the HTC Mogul Sprint ROM 2.16.651.0???
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
drewcam888 said:
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
Click to expand...
Click to collapse
I am the only one that tried to help this person from the moment he started this thread. If you didnt notice I tried everything under the sun. If this person does end up getting it, it will not be because of you. It will be because of what I taught him already finally getting through.
Drew, you do not help anyone. You put your in your two cents in lots of threads usually short answers that only mislead someone further. All someone has to do is click your name, and find all posts by this user and sit back read and say OMG what an idiot.
You have yet to make any contributions that help out any forum. You are just a bantering PITA. You say useless garbage to just up your post count.
I on the other hand, help people. I spend a lot of time on my ROMs and software. I dont use Navizon links to make money off of people like you try to do.
You think you are invincible or something buddy? Say one more thing about me and you will be repramanded or worse. Trust me on that..
Again I will state for you omegafunky. If you want step by step help pm and I can chat with you. I can help you fix your issues.
And wow Ryan thats an earful. And wow why the need to feel you have to threaten people.

is there a way to unbrick a HD2?

after rom flash it just went dead, no light, no bootloader no nothing.
tried hard reset, pressing different button and it wont work no bootloader to load other roms.....
What ROM did you flash? I read this before that someone flashed the wrong ROM to their new HD2 and bricked it. I couldn't find the posting. I think there wasn't any solution since you need the bootloader to flash the ROM. The only suggestion was to find someone that can factory program the phone and hopefully restore it with the correct bootloader and ROM.
Sorry to hear it, but hope it helps
more info would be a good start. which hd2? what rom? hspl2? hspl-1024?
ah Sorry about the missing info.
HSPL2 on a tmobile USA version.
HSPL2 installed flawless it went dead right the way after flashing the ROM-Version:RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
well there is your problem. The tmous 1024 only supports roms based on a 2.10 base. You have flashed a 1.72 based rom. I dont know if it recoverable, you should start in the rom development section. (And also the new tmous rom develoment section.)
Best of luck.
Also, (and do correct me if I'm wrong here) but I'm pretty sure you want to avoid ROMs with Radios since (I think) that will brick the USTMO HD2 as well. (unless of course it's the same/TMOUSA radio)
IM with you... just done bricked my hd2 right now to. wanted to test UK rom with im running tmous.... Everyone warned me!
Why do people not read thing before they do things?
jagger2k said:
Why do people not read thing before they do things?
Click to expand...
Click to collapse
im guessing sometimes a thread gets so cluttered that it gets too long for a person to read each post and then just skips around. im guilty of doing that and sometime i do miss some vital information.
hope you can unbrick your hd2.
i got a telstra coming that i will be using on at&t, hope i get all the info before i start flashing mine
Poohball said:
ah Sorry about the missing info.
HSPL2 on a tmobile USA version.
HSPL2 installed flawless it went dead right the way after flashing the ROM-Version:RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
Click to expand...
Click to collapse
I wanted to ask if you ever managed to unbrick your HD2?
I flashed the same ROM - which is SILLY - and bricked my HD2 - only 1 day old...
I am hoping if anyone could find a factory bootloader so that I can have my babe reflashed to TMO???...
Pls pls help...
Can someone help me unbrick my HTC HD2 give me link HELP!!!
I hate to say it, but the reason that it's called a 'bricked' phone is because it's not fixable (at least not at this time, and likely never).
If you can't get to the bootloader there's nothing you can do.
NOthing yet guess? as long we could always turn it back to tmobile. Which I did so Im getting mine this week. I love tmobile for customer service. Anyone knows how HTC goes about refurbishing these brick devices?
someone needs to find out how htc goes about with these refurbish devices. we need engineers on xda!
what has been bricked can't be unbricked!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
babydreamer1520 said:
someone needs to find out how htc goes about with these refurbish devices. we need engineers on xda!
Click to expand...
Click to collapse
they almost certainly either use a jtag connection or just swap out the bios/bootloader chip. Id bet a years wage theres nothing they can do over usb.
In short if u have flashed a tmob rom on a standard hd2 or vice versa your device is ****ed.
jagger2k said:
In short if u have flashed a tmob rom on a standard hd2 or vice versa your device is ****ed.
Click to expand...
Click to collapse
actually I'm pretty sure the tmous roms will work on normal hd2, after all, every cooked rom that unlocks the 576 ram is based on the leaked tmous roms.
anyone confirm for me please?
samsamuel said:
actually I'm pretty sure the tmous roms will work on normal hd2, after all, every cooked rom that unlocks the 576 ram is based on the leaked tmous roms.
anyone confirm for me please?
Click to expand...
Click to collapse
I can't confirm, but that's what I always thought as well
So much for it being impossible to brick an HPSL flashed HD2!
If the bootloader isn't loading at all, you have absolutely no hope of restoring your device via USB and if the bootloader isn't loading, you wont be able to restore it from SD either. The device needs to be responding to USB commands for it to be flashed via USB. Does the PC detect the device at all when it is plugged in?
I am not familliar with the internal archetecture of these devices, but if the bootloader is stored in a dedicated chip, you can theoretically boot the device with another bootloader chip, then hot swap the chip to your dead one and reflash the device, but this of course relies on the chip actually being plugable and not soldered to the motehrboard which I highly doubt would be the case. I have done this successfully on computer motherboards when I have farked the BIOS with a bad flash, but those chips are PLCC plug type chips so they are easy to hot swap.
The only other option is to reflash the chip via a JTAG connection, but this would have to be done by HTC or a service center with the appropriate equipment.

hd2 bootloader screen corrupted

Hi guys,
my bootloader screen appears to be corrupted.it doesnt show the PB81110 but instead shows a weird symbol and HX-BC
SPL-1.42.HSPL XE
cotullaHSPL
Image is attached below.
I did hard spl using HSPL 2 tool by cotulla,but i dont have the regular first line of the boot loader.
The problem is I cant get into my phone i cant install any rom or radio or do any kind of flashing and anything I try,the process stops or exits in the halfway,showing invalid device error or connection error.
I tried flashing through my SD card too but it too doesnt bring my phone back.
The error I get now on switching on the power button is
flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED.
I tried mulit-port tty and tried task 29 to unclutter the ROM too but it showed way too many errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is my phone dead?
The HTC guys asks for 1/3 the phone price for changing the mainboard.
Is it possible to bring my phone back?
please help.....
guys anyone ... please help.....
guys anyone ... please..... help....
1- when you originally installed hspl, did you get the confirmation "we did it" or whatever?
2- did you ever have the "right" hspl first line? not sure what hspl2 looks like, but you are right, it is different than hspl3.
3- when you flashed from sdcard, it most likely removed hspl. can you get to bootloader? if you can, you will be able to save the phone. if you can, what does it say?
4- what phone (us or not?) do you have? what rom were you using? what were you flashing?
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
jsmccabe78 said:
1- when you originally installed hspl, did you get the confirmation "we did it" or whatever?
Yea.I got the confirmation that 'we hacked it' on my mobile.
2- did you ever have the "right" hspl first line? not sure what hspl2 looks like, but you are right, it is different than hspl3.
No, i never had the first line right.
But when i switch on off for many no of times and getinto the bootloader screen i get the first line correct,maybe 200 in one time but at those times when i eagerly try to connect to the PC i dont have the word 'serial" or 'USB" mentioned on the bottom white column of my bootloader of my mobile,and still if i ignore and try to connect to the PC the pc doesnt recognize my phone during that time.
3- when you flashed from sdcard, it most likely removed hspl. can you get to bootloader? if you can, you will be able to save the phone. if you can, what does it say?
'when you flashed from sdcard, it most likely removed hspl' -----Tht's what i 've read in forums too.But the image(sorry I dont have a good camera,i know the image i posted isnt clear) i posted is what the bootloader screen i get with
a weird symbol and HX-BC
SPL-1.42.HSPL XE
cotullaHSPL
4- what phone (us or not?) do you have? what rom were you using? what were you flashing?
Click to expand...
Click to collapse
I bought the phone in singapore,model no 'T8585';so it not a 1024 US.I am not particularly sure what ROM i was using all these days(i mean before the flashing).
I m a bit new to this flashing so initially i flashed it with 'RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe' from htc singapore website and that is what led to the all the trouble...
I tried to unclutter it with Task29 provided by doloop and it didnt work out... but somehow after that i tried to flash with 'Duttys_2.5_5.23146.5.3.10_3.14_HD2_ML_Family_ROM_(V7)_ASIA-WWE' but nothing worked.
But after trying so many times.... i found that sometimes all the above stuff did complete the flashing and sometimes it didnt complete.
But whatever i did, whether the process of flashing completed or not i could not get the phone working.
The image i posted in the first post is what i get as bootloader screen.(on pressing the pwr+volUp)
When i press the power button i get a grey screen with text as
'flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED'
i further read the forums and I tried using a SD card to flash but it failed too at the radio install menu.
my MP-tty results are in the attachment of my first post.
I did run it like 4-5 times.Only once i got the results as expected. USB3.txt attachment.
I think the bootloader is corrupted.. but i dont know how to fix it.
Somewhere i read that JTAG tool(it costs 60% of the phone price) may help in writing a bootloader .. but it requires to open the phone and too much complication involved in it,which i dont want to deal.
IS there a 'soft' way to rescue my phone?
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Samsunguy said:
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Click to expand...
Click to collapse
i have hspl installed and i tried to install a stock rom by PC and also by SD card .
its not working.
I think the bootloader is corrupt!
Samsunguy said:
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Click to expand...
Click to collapse
Well, i too installed an incompatible ROM (I was NLD version, installed WWE) with HSPL, but the beauty of it is that HSPL allow to do this.
an incompatible rom wouldve been flashing a 1024 HD2 with 512, and he didnt do that.. Also, he used official HTC roms on the website, and ASIA it seems is the correct version for him to use (he had to input serial on HTC to dowload it)
Now, possibly his asian rom isnt compatible with HSPL..
I would be good to know what rom you started with before upgrading to 3.14
Did u install the 3.14 on top of your HSPL? (i know i did that too and had memory problems)
Im no expert (actually i was helped a lot from users here for flashing my week old HD2 into english) but i certainly know that limited access to bootloader is a *****. Try the flash from SD card (a 2go card is better i believe) with a STOCK ROM (download a year old one from HTC, not the 3.14 one).
Did u also try SSPL, instead of HSPL? i know that i didnt manage tro change my language with HSPL (my phone was blocked on 1 language) but worked fine on SSPL..
ANyways, sorry, i know how u must feel..
If all fails, go to the shop and take that 1/3 offer.. but get a guarantee from the guy that if he cant repair it, you dont pay anything
Ps: couldnt believe when u said this :
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
India.. english.. lol! I mean, your english sounds fine. If you had said, sorry i dont speak english in my country which is Nepal, or a small village in china.. but india?
Anyways, keep the forum updated on ur situation
zewill said:
Well, i too installed an incompatible ROM (I was NLD version, installed WWE) with HSPL, but the beauty of it is that HSPL allow to do this.
an incompatible rom wouldve been flashing a 1024 HD2 with 512, and he didnt do that.. Also, he used official HTC roms on the website, and
ASIA it seems is the correct version for him to use (he had to input serial on HTC to dowload it)
Now, possibly his asian rom isnt compatible with HSPL..
I would be good to know what rom you started with before upgrading to 3.14
Did u install the 3.14 on top of your HSPL? (i know i did that too and had memory problems)
Im no expert (actually i was helped a lot from users here for flashing my week old HD2 into english) but i certainly know that limited access to bootloader is a *****. Try the flash from SD card (a 2go card is better i believe) with a STOCK ROM (download a year old one from HTC, not the 3.14 one).
Did u also try SSPL, instead of HSPL? i know that i didnt manage tro change my language with HSPL (my phone was blocked on 1 language) but worked fine on SSPL..
ANyways, sorry, i know how u must feel..
If all fails, go to the shop and take that 1/3 offer.. but get a guarantee from the guy that if he cant repair it, you dont pay anything
Ps: couldnt believe when u said this :
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
India.. english.. lol! I mean, your english sounds fine. If you had said, sorry i dont speak english in my country which is Nepal, or a small village in china.. but india?
Anyways, keep the forum updated on ur situation
Click to expand...
Click to collapse
REply:
I think i had 1.66 ROM version,if my memory serves me right!
I installed 3.14 on top of my HSPL.
I didnt try SSPL.
I tried HSPL2 but it gave 'critical errors...blah...blah'
I thought of JTag repair at my place in chennai,india... but i dont want to experiment anymore with HD2.The phone had died.
Should have bought an Android phone... its lot easier to handle...
The glitches are less too.even if they have glitches there are more solutions.
Similar bootloader errors at my HTC center are managed by changing the mainboard.
When i am done,I guess its a new phone except for the screen and battery.... and couple of buttons.
other language forums:
Few vietnam and chinese guys have had similar problems like i did but they dont have solutions ....
So guys... if u have bootloader text errors .... its almost the end of the phone,unless someone in future finds a solution.(which is unlikely cos the WM 6 series platform is dead ).
Hey dude.... I was desperate in search of a solution.I 've never conversed with an English speaking(native) person before .I was overwhelmed with the reply by jsmccabe78 who is a senior member and i didnt want to sound rude or cheesy!
Anyways thank you so much guys for your replies!
hadrons123 said:
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
I bought the phone in singapore,model no 'T8585';so it not a 1024 US.I am not particularly sure what ROM i was using all these days(i mean before the flashing).
Click to expand...
Click to collapse
Dude you mentioned you bought T8585. It's a clone dual sim HTC. Please correct me if im wrong.
But you might try eten-users forum and search for MTK HD9.
look for the procedure on how you can install the correct compatible ROM for your phone.
You have to order a special cable for you to flash the correct compatible ROM.
Remember, its a clone HTC phone and not an original one.
Problem solved. Thanks!
dennis.vallente said:
Problem solved. Thanks!
Click to expand...
Click to collapse
To help others, can you share how you solved the problem?
dennis.vallente said:
Problem solved. Thanks!
Click to expand...
Click to collapse
are bol de yaar.
plz rwply it man.

Categories

Resources