Related
Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
HDJ80 said:
Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
Click to expand...
Click to collapse
Tell us something about the speed of the system and the space it takes...
Regards,
Primoz
p.s. Hope it will be soon released a version for the magician :wink:
Some screen captures
I have few installed programs but I think that the speed is very similar.
I do not understand very well as Magneto uses the memory, you have 14,57MB of ROM (storage) to install programs but you cannot install them in the RAM.
You can see 24,35MB of RAM but I believe that Magneto uses all the RAM, only who deal with form different those 24.35 from the 100 rest that we cannot see.
Resco file explorer cannot accede to Windows or temp but microsoft file explorer if it can.
Parrot CK3000 works fine.
About backpack: battery and TV/monitor output works but CF slot dont works.
Is it still using the MS bluetooth stack ? Any improvement on bluetooth function ?
Yes, it is MS BT, but now it appears a new menu, "COM Ports"
IMPORTANT: I have upgrade to Magneto using himaupgradeut_197.exe and the original nk.nbf file (without patching)
It has worked to the first time and I have not had any error of identification.
Also I have left the Storage empty before beginning the update.
what does the "patch" do anyway?
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
OMEGA_ReD said:
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
Click to expand...
Click to collapse
should try, you can downgrade 2k3SE later if you don't like 2k5
witch version shuld i take?
and shuld i patch it or something like that to be able to downgrade it later?
thx m8!
ishtangli said:
what does the "patch" do anyway?
Click to expand...
Click to collapse
It changes the filename of file "DevAuth.exe" in a way that it can't be executed anymore before start.
This application checks the hardware in some way to determine if the device is allowed to use the software. Maybe some of you have a device that matches this "authentication".
What about BT voice call?
Hi
"Parrot CK3000 works fine."
Does it mean that you can originate a call from BT device? Voice dial or smth. like this?
Or it just receiving calls and you can hear and microphone is working?
Making of voce calling over BT is one reason for me to upgrade...
can you give met the link for witch i can download it?
I have used the file nk.nbf from Xda-developers ftp.
I have returned to wm2003SE with himaupgradeut_197.exe and nk.nbf file of version 2.06.
ParrotCK3000 works just as with 2,06 version and the change of the registry.
Magneto is very interesting but it specially has a great failure, when you install many programs the system becomes slower, particularly with programs like betaplayer.
If the problem of the RAM use and the access to CF slot were solved, it would be a great system.
2.06 works with AS 4.
More news:
Magneto can be reinstall again using himaupgradeut_197.exe in bootloader mode.
If we installed the programs in the SD and left frees the memory of the PDA, the system goes much more fast.
Some programs cannot be installed in the SD and they settle in the PDA. Some programs that work in wm2003 and wm2003se not admit magneto, aborts the installation.
SPB pocket plus does not settle because it says that it is being tried to install on ppc2000 and aborts the process.
Is very good day
I speak about QTEK 2020i Alpine and no other
I succeful unlok my STORAGE was as looked after trying to unlok Extended_ROM.
Try this step
1) Go to registry HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/TRUEFFS_DOC
2) Change value in folder "Storage" by other thing example "Toto"
3) Soft Reset your 2020i
4) With Explorer now you must have a folder nammed "Toto" in my example
5) Try to copy or delete inside a file. For me it's working
6) Return in registry, return original value "Storage" in Folder value
7) Soft reset again
In final you must have your original Storage that is now unloked
Let me know if it's correct for you
I'm be happy and to find solution
[/b]
I tried exactly what you said, even that I have tried it before, but it DID NOT work.
that parameter which you changed is just responsible for the name of the folder only, so if you realy could unlock the Storage folder, then it happened with you by chance with another way. if it was just that simple then flashing PPC would solve it also, but it wont, I also tried that.
so please try again to lock and unlock it if u remember the way and tell us in more details. in yours explanations: the name of storage is changed but still I cannot delete or save into it.
on the other hand, if you change the value of MOUNT there to 0 then you will hide your Storage folder, and this is what the LoadvDisk does, it just plays with such a registry parameter, but for unlocking the DLL file is responsible for that, for those who doesn't know what is the DLL, simply I can tell that it is a collection (Library) of functions, now that DLL file has a function that is responsible of unlocking the disk by modifying the non erasable memory ROM. and that is why when you flash the PPC, still your extended rom and Storage is locked, because that data is saved on the ROM that needs a special function and password passed to that function for modifying that data there.
sorry for the long post
Right
In fact i was no certain about "other way" at the moment where i wrote.
Follow exchange about " eNiPlA", i tried modify the tools for SX66 and use it during the test but don't view effect immediatly. It was the same tools that was loocked my storage that today after modification unlock it.
Try this, but i m not certain that to change name of folder in registry is necessary
1) Go to registry HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/TRUEFFS_DOC
2) Change value in folder "Storage" by other thing example "Toto"
3) Soft Reset your 2020i
4) With Explorer now you must have a folder nammed "Toto" in my example
5) USE TOOL ATTACHED HERE and Try to copy or delete inside a file. For me it's working
6) Return in registry, return original value "Storage" in Folder value
7) Soft reset again
IMPORTANT
Don't use this tools (in this state) to lock, but just for UNLOCK Storage . As EMU said, if you try to lock , in fact it lock your STORAGE.
yes, that tool worked alone, just install the tool, run it on your device and try only to unlock (ONLY UNLOCK, DONT TRY ANYTHING ELSE) and it would be ok after a soft reset!
thanks apoujade, can I ask you how did you modify the tool, which tools you used for that, if you had the whole source code can you please send it also, because if you could modify this tool, then we may reach to the Extended Rom easier from it also.
I feel we are very near to the solution....
Hi
This tools came from http://www.myehud.com/xv6600/cabs/ExtTools.exe.
I changed with binary editor string "rEiRaH" with " eNiPlA" wthitout missing 2 space before. It's seems to be made for Audiovox with Extended ROM in target. On Alpine it's work for Storage area.
Hello guys, please help me!
How can I unlock the Extended ROM on my XDA IIi? I've been used the search-function but I haven't found any thing that would heplfull fo rme!
Storage released!
My Alpine's storage was also locked and have been looking for any solution.
Today Asukal informed this thread and I tried ExtTools_modifiedAlpine.exe.
It works quite well and I could unlock my Alpine's Storage area!!
Thanks guys!!
Stop!
Storage is the place where I can install programs and them aren't deleting during a hard reset and a ExtROM is the place for the software that are using by the providers! Are I'm right? :?:
Than it wouldn't be helpfull for me!
animelover said:
Stop!
Storage is the place where I can install programs and them aren't deleting during a hard reset and a ExtROM is the place for the software that are using by the providers! Are I'm right? :?:
Than it wouldn't be helpfull for me!
Click to expand...
Click to collapse
Yes, you are right.
What I thank all friends here is that I could release the lock of Storage which was locked during the operation of finding the way to unlock ExtROM.
So if I try this manual, after that my ExtROM is writeable? That would it be cool!
Hehehehe, space, I want more space for my porgrams! ^^
to clear something out:
everyone is wondering how to unlock the Extended Rom, so as everyone, while we were trying to figure it out, our Storage Folder became also locked (not-writable) so we had another problem, it became our main problem, since the Storage folder should be writable in the normal form, so the ideas in this post are only to unlock the Storage folder and has no relation to the extended rom, so if your Storage folder is already writable, then ignore what is in this form. if you are looking for a solution for your Extended Rom, the answer is: WAIT, we are working on that, and when it is solved most probably you will find the answer in a seperate post..
Good luck to all in the unlocking process..
so Brother EMU, do you already find the way to unlock the Ext Rom of XDA? I upgrade to WM2005, then the tools I used before is mulfucntion.
I am eager to wait for your solutions, tks!
Hi
Without EMEI, i sue two site for french ROM, but other depends what you want (O2, WWE ..)
Mobinaute it's free but you must ask for download DANGAARD ROM
http://www.mobinaute.com/mobinaute/ (search for DANGA)
Brighpoint it's also free, but you must create an account to access download area
http://www.qtekfr.com/modules/news/
Other way, but not the last version is ftp from xda where you search in ALpine folder
ftp://xda:[email protected]/
what do you mean? is there a point to posting the rom download sites???
tia
Works for locked 2i Storage
THANK YOU!
This worked to unlock the Storage folder on my 2i
I didn't even realize that the problem started when I tried to use the extrom unlocking tools, I just found one day that my storage was locked and I could no longer write or delete files from it. That sucked, it took me ages to find this post and now it is fixed. Great!
Re: Storage released!
reveil said:
My Alpine's storage was also locked and have been looking for any solution.
Today Asukal informed this thread and I tried ExtTools_modifiedAlpine.exe.
It works quite well and I could unlock my Alpine's Storage area!!
Thanks guys!!
Click to expand...
Click to collapse
MY XDA2i HAVE THE SAME PROBLEM,CAN YOU SHARE A ExtTools_modifiedAlpine.exe WITH ME?THANK YOU!!!
Re: Storage released!
catcatwh said:
reveil said:
My Alpine's storage was also locked and have been looking for any solution.
Today Asukal informed this thread and I tried ExtTools_modifiedAlpine.exe.
It works quite well and I could unlock my Alpine's Storage area!!
Thanks guys!!
Click to expand...
Click to collapse
MY XDA2i HAVE THE SAME PROBLEM,CAN YOU SHARE A ExtTools_modifiedAlpine.exe WITH ME?THANK YOU!!!
Click to expand...
Click to collapse
Why don't you download from the above link?\
Here is a link again.
http://forum.xda-developers.com/download.php?id=5263&sid=1fb6fbc8c0958abc01e668c52bbb1df3
apoujade said:
I speak about QTEK 2020i Alpine and no other
Click to expand...
Click to collapse
If you are speaking about QTEK 2020i Alpine and no other, WHY ON EARTH YOU OPEN THIS TOPIC AT THE "Himalaya upgrading etc." FORUM?
Thanks
To all the Masters
You're Great
It work's with my Alpine (i-mate PDA2)
i've unlocked my Storage
Thanks
heya, I noticed a whole lot of useless programs that I dont use from the ext. rom that ships with the cingular 8525..
I know from my previous phones I'm able to hardboot and when that message comes up.. something like "installing custom components in 3 seconds.." one would do a softreset and that installation shouldnt come up again right?
well I was wondering what cab files were needed so I can install only the needed ones.. ie mms/wifi setup files, etc.
Anyone know? Thanks!
Dunno if you ever got your answer, but I can guarantee you that when I get mine tomorrow, it's one of the first things on my list of things to do. I know that 90% of the crap that Cingular puts on there I have no need for..
If someone figures this out let us all know. i too wanna try to play around with some other ROM's to see which works best with my configuration.
I upgraded from a TyTN to the Cingular ROM
I did the reboot thing so that I did not get the "value-add" stuff from Cingular after I let it do its normal thing. What I found out was that if I did not do the reboot thing, the "value-add" stuff from Cingular changed the keyboard mapping so that I could not figure out what keys the special characters were on. When I hard setup again, I rebooted and the keyboard works great. The only thing is, you have to put in all the information in the connection menu.
There's 2 times that the 3 sec screen pops up.
Does the keymapping work correctly if you let the first one run and do the reset before the second one?
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
Do you have the before and after memory numbers by chance I would like to see them if you do?
the keyboard setup is done in the first 3 second customization.. those cabs are in the windows folder.. the 2nd customization is the cingular stuff from the ext rom
aadadams said:
Do you have the before and after memory numbers by chance I would like to see them if you do?
Click to expand...
Click to collapse
Sorry, I didn't see the exact before and after.
It looked like I gained a little over 1mb.
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
MilanoRex said:
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
Click to expand...
Click to collapse
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
saq said:
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Click to expand...
Click to collapse
That worked, thanks
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
What was the "other stuff" you had to self install? I am contemplating this procedure but am not sure if it gives me enough storage space to justify a hard reset and reinstall of everything?
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Press-E-Dent said:
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Click to expand...
Click to collapse
-------------------------------------------------------------------------
ok none of the files are corrupted this dose work on monet as i own one.
it wont hart your phone just make sure you unlock it frist. then install NotSignedOff.cab to your phone
for more help plz go here http://www.pxdxa.com/read.php?tid=36889
and here http://www.pxdxa.com/read.php?tid=36631
Thanks rickwyatt.
Just aout of interest is this Only a 'LOOKS' thing or does it add more useful features?
Perhaps I did it wrong but when I unzip the files I end up with 3 folders (Numbered 1-3) PLUS one called Sounds.
Thanks for the theme
The theme worked in my startrek. But, i don't see the alarm icon on whenever i reboot the phone though i set the alarm on. Any idea?
i have tried this on my monet, the first time i followed the instructions as listed here only to fine the phone hangs making strange noises after the sim code screen.
i have carried out a hard reset on my phone and tried again, this time using only the shelres dll from the first folder, no other dll's but all the other files,
i restarted the phone and it started fine however there was nothing in the start menu - one quick restart and all the new icons are present.
looks lovely
thanks
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
My_Immortal said:
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
Click to expand...
Click to collapse
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
hakan439 said:
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
Click to expand...
Click to collapse
use this then install the icons
Thanks for your windows live
rickwyatt said:
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
Click to expand...
Click to collapse
your windows live save my ass.Thanks alot.
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
marymure said:
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
Click to expand...
Click to collapse
try copying those dll's through ActiveSync
i blockt my phone with this .......what can i do
**** iu block my phone tell me pleasae what can i doi
alexwittmann said:
****** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
You should do a soft reset on your device.....
alexwittmann said:
**** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
Hakim Rahman said:
You should do a soft reset on your device.....
Click to expand...
Click to collapse
Watch you language, Swearing will not be tolerated, This is your final warning. Also if you quote somebody then please remove the Swear word.