I attempted to upgrade the firmware listed on Clubimate but it failed when 25% through. Now it seems there is no firmware on the JasJam so it doesn't allow me to upgrade. I get the error about 'Vendor ID' ActiveSync no longer sees the device. Can anyone help before the wife kills me.
Bob
Bob
Tried any of these tricks mate:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
You had your chance, I would rather give the wife a chance..(joking).
Press the on/off + the button next to the jog dial + reset (altogether). if you get the multi color screen you are ok.
This is a good place to start:
http://forum.xda-developers.com/showthread.php?t=290206
Establish whether your BL is 1.07 or 1.08,
USB>rtask a
rversion
Then review this:
http://forum.xda-developers.com/showthread.php?t=285586
Main page:
http://forum.xda-developers.com/showthread.php?t=295751
Good luck.
Simple
AussieBob said:
I attempted to upgrade the firmware listed on Clubimate but it failed when 25% through. Now it seems there is no firmware on the JasJam so it doesn't allow me to upgrade. I get the error about 'Vendor ID' ActiveSync no longer sees the device. Can anyone help before the wife kills me.
Bob
Click to expand...
Click to collapse
aussiebob can i ask what upgrade you downloaded and were trying to use before you got the vendor ID error?
Where in Australia are ya Bob, perhaps if you're local I could give you a hand?
Imate JasJam upgrade failed - now dead PDA
Thanks for your responses but I have tried everything I have found (apart from the one that fixes it) I can get the colored bars on the screen and it switches to the Upgrade Image screen then the error with 0%
Bob
AussieBob said:
Thanks for your responses but I have tried everything I have found (apart from the one that fixes it) I can get the colored bars on the screen and it switches to the Upgrade Image screen then the error with 0%
Bob
Click to expand...
Click to collapse
Bob,
can you answer my question.,... what upgrade did you download from IMATE and try and flash your device? what part of AUS are you in?
Sorry about that it's
Rom version 1.31.305.2
Radio version 1.21.31.10
ExtROM version 1.31.305.104
Also forgot, no wonder I can't get the upgrade to use, maybe I should put Linux on it.
I'm down in Goolwa Beach
Also on the screen with the colored bars it states IPL 1.01 and SPL 1.06 If that helps
AussieBob said:
Also on the screen with the colored bars it states IPL 1.01 and SPL 1.06 If that helps
Click to expand...
Click to collapse
ok... do you know how to open an mtty session and connect to your device?
Yes I do I've looked into that but don't really know what I'm looking at.
Bob
do you have msn messenger or google talk or something... it will be easier to explain and send files over that
I use Linux but I should be able to get to you. What is your user name?
check your private messages...
I have sent you a private message. Hope it makes sense.
Related
Hi,
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
Please help.
Thanks
If your device is still working ok as a PDA then hopefully it just screwed up the radio update of your device.
Try reflashing the Radio only
Look Here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Post back with results
Regards
S.K
EDIT: Sorry only works on 1.04 bootloader only. Afraid your gonna have to wait for Pof to come up with a 1.06-1.04 workaround
Hi S.K,
Thanks for the info. I have now tried installing the HERM_1.20.31.10_type2_radio_fixed upgrade but unfortunately the radio upgarde crashes also. It all seams to go well, (after using MaUpgradeUt_noID.exe twice) the phone says "Upgrade Radio Stack Please wait" and the progress bar appears on the PC but then after 10 mins I get an ERROR 114: RADIO ROM UPDATE ERROR.
Do you think this might be becuase the last upgarde partly installed bootloader 1.06?
Any other suggestions - I'm desperate to get the hpone on M3100 working again.
Thanks
Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please post USB monitor capture, otherwise can't help u.
Hi Pof,
Thanks for the offer, I will sort out the usb software on Monday. Are there specific actions that I should try, obvioosly I will usb monior everthing I do but I want to keep it to the point and not waist yr time trailing through huge log files.
Cheers
BTW - I have tried all options of recovery, such as attempting to install the latest radio and trying to install the new rom from an sd card, trying several roms and using imei unlocker - all without any joy.
I think the problem is that I have partially installed radio and bootloader 1.06 so I can't fix the problem.
Thanks again.
@wotthefok:
For me is faster to look at the usb log file, then I exactly know why the upgrade fails, otherwise I have to decode it from your feedback and I can't be really sure. Check the "upgrading problems" page on the wiki, if none of the steps there seems to fix your problem, post USB monitor log please.
Log Files as requested
Hi,
I have captured information using usb monitor and attached the zipped log files for your attention.
The first is called USB_monitor_log_Herm_120Radio_twice. This log details attempting to install the HERM_1.20.31.10_type2_radio_fixed upgrade, and running it twice - just in case.
The USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_twice.zip details attempting to install the RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship upgrade, simply using the standard ROMUpgradeUt.exe method. This generates the expected Vendor ID error.
My primary focus is to install the radio upgare or download my bootloader to 1.04. The PDA part of my m3100 does now freeze occasionally but at least functions whereas the phone is completely dead.
Thanks in advance.
Please attach capture in *ANSI TEXT FORMAT*, the .lgs file you zipped is totally unuseful
Edit -> Export and Save as type "ANSI Text files".
Also make sure you export in "COMPLETE" view, see the wiki for more details.
OK, Spot the novice.... I have now created a txt log file that captures activity of me running the 120 Radio upgarde - but only once this time. I still had to zip the file due to it's size. Hope this is OK.
I'll send the other logs within the next couple of hours. Please let me know if the output I have sent so far is acceptable?
Thanks
wotthefok said:
Please let me know if the output I have sent so far is acceptable?
Click to expand...
Click to collapse
No, it's a "basic" capture, you have to export a "complete" capture:
Start USBMonitor.
File -> New session -> USB Monitor -> Select USB device where your phone is connected -> Check "request view" -> Finish
In the upper part there are two tabs: basic and complete. Click on "Complete".
Right, Try again (duh!) OK, I've tried to keep the log files names as self-explanitory as possible... USB_monitor_log_Herm_120Radio_run1.zip is the r20 radio upgrade, 1st run and USB_monitor_log_Herm_120Radio_run2.zip the second run - without disconneting or resetting the device.
USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_ran_twice.zip is the Cingular upgrade run via the ROMUpgradeUt.exe, again run twice without disconneting the device.
Hope I got it right this time.....Please let me know if there is anything else I can do.
Thanks.
This time you got the captures right
- You're on bootloader 1.06: You don't have 'rtask' command, you won't be able to do any radio upgrade only.
- Your device is not CID unlocked (Security level=FF, unprivileged)
- The bad flash caused the CID area to corrupt (CID: Wait interpreter timeout)
- When flashing a full ROM you get a CID not allow (255) this is because your corrupted CID doesn't match the CID on the ROM.
The radio part is screwed, you could have fixed this if you where in bootloader 1.04 by flashing a full ROM, but as you are in 1.06 you can't because of CID checking. But you're lucky because the OS ROM is intact and you can boot the OS, you should be able to downgrade to bootloader 1.04 from OS and flash a full ROM after, which will hopefully fix your radio.
Just wait until a solution to downgrade bootloader is available (I'm working on it).
Hi,
As I suspected.... Suppose it's not all bad news though - just means that I have to be patient and use my communicator once more. Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
I have already got a IMEI-CHECK sim unlock from where I originally got the M3100 unlocked from Orange to work on o2. That said, I have run either unlocker 2 or 3 with the .unl that I know worked I now get
HTC HERMES v3c unlock
Starting communication.........
Checking device..............ERROR
The device you try to unlock is not supported.
Please contact your supplier site.
Device is rebooting
Press any key to quit this application.
I'm currently chatting to the guys at IMEI-CHECK re this problem.
Anything else I can do to assist you in anyway??
Cheers
wotthefok said:
Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
Click to expand...
Click to collapse
They have it (M3100v3cUnlock.exe), but it will not work on your device because your IMEI is corrupted and their unlocker will not be able to read it and to check/compare with the .unl key file.
Hi,
Just a quick update. The guys at MIGsofT LTD have VERY VERY generously said they'll have a look at the problem for me so my phone will be winging it's way to them today.
Thanks for your assistance and helping me be certain of the problem and to better understand the root cause.
Hope this information will prove useful to others.
Another quick update...
The guys at IMEI-CHECK (MIGsofT LTD) have rectified problems with my handset and managing to reinstall bootloader 1.04 in the process!!
They also turned my phone around in under three days and only charged me the cost of postage! I had previously been a customer of theirs but it was still a very generous and helpful offer and I would certainly pay for the service than have a duff handset - after all £250 + for a paperweight is rather excessive....
If you're experiencing a problem like mine why not get in touch with them and offer them money to have a look at your handset? No Guarantees but it seemed like my last chance, for a while anyway.
Praise to IMEI-CHECK for a brilliant service - they are King of the day !!
Dear All,
I've tried to upgrade to ROM Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship
and unluckly cable loosen and I reset the phone.
Since it's in the middle and can't success enter the Windows Mobile,
but the bootloader was updated to 1.06.
Now I can't flash any ROM either
HER_DopodAsia_1237074_1060010_WWE_SHIP or the new one.
The tools on "imei check" even can't recognize my phone.
Any one can help me on this issue, please?
Thanks in advance.
Try the steps here, let us know the results:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
If you don't fix it with the proposed solutions attach USB Monitor capture in text format as explained in the bootom of the page.
I have the same issue, and sent it to service, and now I have the phone back and they could not fix it, so got no radio or imei number, so none of the FAQ will work for me.
So I have an expensive paper weight.
Hi,
ME TOO!!
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
I have also tried imei without any joy.
the PDA part of my M3100 still works but the phone is dead. I have been told that if you can get the latest radio installed then you satnd a chance of the phone part working.
We need a hack to get bootloader 1.4 back on the phones.
Please help.
Thanks
My one now is a photo frame which one show "HTC" or "Windows Mobile",
at least your one is a PDA.
There are nothing in "info 2" and so nothing can be flash into it.
Is it possible to have something written CID and IMEI to phone in mtty
and let the flash rom success?
i am in the same situation like yhlee. Pof, i have reply your pm and ready to upload the result file to FTP. where should i upload to?
Thanks
oh i forgot to say, mine is even worst. as soon as i turn on the unit. it will go right into bootloader without press any button.
The USB Log is too large (around 2MB)
and can't upload, any suggestion?
Thanks.
rnc1688 said:
oh i forgot to say, mine is even worst. as soon as i turn on the unit. it will go right into bootloader without press any button.
Click to expand...
Click to collapse
This can be fixed by bootloader commands 'set 14 0' and 'task 8', will reboot your device and boot into OS again (but no GSM yet!)
yhlee said:
The USB Log is too large (around 2MB)
and can't upload, any suggestion?
Click to expand...
Click to collapse
Upload it to xda-developers ftp:
ftp://xdaupload:[email protected]/Uploads/Hermes/
USER: xdaupload
PASS: xda
POF, file have been uploaded, file name= rnc1688
Thanks
'set 14 0' and 'task 8' didn't work
@rnc1688: It starts the flashing process, but you get a "CID not allow (255)" error because your CID is corrupted and you are in bootloader 1.06.
Is not booting WM5 after "set 14 0" in mtty.exe? If it's not booting WM5 you'll not be able to flash bootloader 1.04 and bypass CID checking.
so i guess my unit is bricked now.
I've upload the file which named yhlee.txt.
However, I'm going to send the unit for service.
Hope they can fix.
Any way to make it show the bootloader screen on start-up
everytime?
"set 14 1" doesn't work after push the RESET button.
Thanks.
@yhlee: U're getting exactly the same error as rnc1688. Device in bootloader 1.06 which has corrupted CID, however you say you can go into OS, so it would be possible for you to downgrade the bootloader so it does not enforce CID checking.
yhlee said:
Any way to make it show the bootloader screen on start-up everytime? "set 14 1" doesn't work after push the RESET button.
Click to expand...
Click to collapse
Try "set 1e 1" and then "set 14 1", you'll boot stright into bootloader.
@rnc1688: If you want to go WM5 try this:
"set 1e 1" and then "set 14 0", you should be able to boot stright into OS.
no luck either
grrr!!!... command "set 14 [0|1]" is working fine in 1.04 here to switch boot into WM5 or boot in bootloader mode... probably different in 1.06??? I don't have a 1.06 now to test
Mine one is just showing "Windows Mobile" but stuck there,
but seems rnc1688 one is a PDA but my one is nothing.
I've sent to distributor for service.
Thanks you pof.
yhlee said:
I've sent to distributor for service.
Click to expand...
Click to collapse
Let me know when they fix it... i'm curious about if they will fix it with 1.06 or they will downgrade to 1.04 first.
I got a correct message back from the service company, and they will not fix a bootloader 1.06 unless the original rom has been release with it, I was told that is HTC policy on this.
Hi!
long time viewer first time poster.
I have G4 CID LOCKED Cingular 8125 with mfrazzz's Crossbow Reloaded 1.7.1 I have wizard love Rom as Base.
I really tried hard to update (I guess it is really a downgrade) my original Radio from 02.25.11 to 2.19.11 but no matter what I do, it failed.
I tried with every romupdateutility_wizard_noid.exe i could find but I get the same result everytime.
ON PC: I get 260 Error (tried in two machines same error message)
and
On my Wizard: stuck in this 3 colored screen. I see 3 color screen with "RUU" in right upper corner and "USB" on left bottom with IPL/SPL version showing in red If i press reset button, it will boot back to mobile windows fine.
Can anybody help me?
My rest device info:
ROM Version: 2.18.0.0 WWE
ROM date:2/14/06
IPL/SPL: 2.25.0001
GSM:02.25.11
Protocol version? 4.1.13.12
ExtROM version: faria V5.0
My Downgrade
All I did was use the rom upgrade utility from the "wizard love rom" (the one that is in Italian) and the T-mobile radio rom listed in the Wiki.
Worked like a charm!
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
nic2mit said:
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
Click to expand...
Click to collapse
Is your device actually booting up? If so, just download one of the radio ONLY roms. It won't matter whether you have a CID locked phone or not and the radio ONLY rom will not touch the IPL/SPL.
Having said that, is there a reason why you want to downgrade to 2.19? Are you having missed calls issues?
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Probably you read this already
xdawiz said:
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Click to expand...
Click to collapse
A little bit off regarding your initial post but here´s good feedback on how both radios behave.
http://forum.xda-developers.com/showthread.php?t=312834
I've had some problems as well.
I used the tool that came in the download to downgrade to 2.19 (I am having missed calls problem) and it won't.
I'm using a Windows Vista and already did the whole thing to update drivers with the one given on the forum over here, yet, everytime I run the thing it crashes and then I have to go through it all over again.
Its like the driver just doesn't work anymore, even though I have tried "re-updating" it to the one that I downloaded here, unlike the real Roms this one just won't go throguh and wait for the 3 colored screen to come up, just freezes before.
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
RaDeNRFX said:
- I am so sorry posting this twice in the wrong sections, it seems that i'm a really noobie forum user - But i finally found the rite section. So my humble excuses.
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
Click to expand...
Click to collapse
ach2 said:
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
Click to expand...
Click to collapse
I waited till the Program says connection error...and send me to recovery proces. And i've been making hella tons of coffee after trying to flash that many Radio Roms. Any other suggestions? I'm so desperate
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
ach2 said:
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
Click to expand...
Click to collapse
Well the weird part is "No GSM" appeared occasionally...some times it shows it sometimes it's not showing it.
No...i'm a Vista hater. And dun have the original manufacturers ROM. I've got the "T-Mobile Vario II" from The Netherlands..so if anybody got a link for the original version i'd be thankfull.
The Radio it self is intermittent and very inpredictable...for example:
Radio indicator says i got full recieve:...but i can't call or recieve any.
Connection error: 262 (which is, if i'm not mistake a connection error.) Which is bull cuz i'm re-running every other ROM's upload with the same way and succeded/
Radio indicator says no reception and shows an exclamation mark:...and my GF just called me to hurry up and pick her up :/
But the weird part is...it seems that my radio ROM is locked somehow. I can upgrade or downgrade SPL's and OS ROM's but not the Radio ROM.
I've tried to use MTTY by now and followed the manual bellow: (Problem 5)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
But it began with invalid password. Procede as written and it didn't helped.
More suggestions are welcome
My bad...i didn't looked well enough. It is saying No GSM the whole time.
More information:
I've checked the Device information on the Hermes now some information are blank:
Radio: Blank
Protocol version: Blank
IMEI: Blank
All other information field are filled. Been spending hours reading tutorials and manuals...and nothing. HELP!
OK,
This isn't a problem I've had myself, but loads of other people have and there are quite a few threads on how to unbrick from here... you're going to have to do a bit of reading.
This page shows the different combinations of OS/radio/brick type etc and should point you in the right direction for the correct course of action http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Then read through this thread http://forum.xda-developers.com/showthread.php?t=286755 . It's got really long but read the beginning where POF describes the types of problem and also the solutions. Then it's probably best to jump to somewhere near the end and pick someone who has a similar problem.
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
ach2 said:
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
Click to expand...
Click to collapse
I am really thankfull of ur post. Unfortunately, i've been doing some reading. Including the link u gave me. The problem is that i can't upload/flash Radio in nhb format.
As i described in the first place, i can't load a nhb format radio in RUUWrapper.exe properly. It can start the proces..but it always end up with a connection error code 260/262 during the installation progres bar (0%).
The solutions some ppl tried in ur link is often not my case. And the similar cases i have tried where i end up with the same grumpfy situation.
have you tried to flash the radio using the SD card method? I too have a cable connection problem but I fear mine may be hardware failure.
Yap...and no luck
I cant seem to get hSPL working
The executable runs, i get the G3/G4 button, press it, after a while the screen dissapears, 1 flash of what seems to be a cmd-prompt but thats it
The device looks not affected in the whole process.(no white screen/flashes or any other indication of a tranfer of any data)
Bootloader check confirmes the problem by still showing IPL/SPL: 2.18.0001
Its a non-branded QTEK-9100. So no Simlock. Anyone can supply a way to get hSPL on the device?
Galaphile said:
I cant seem to get hSPL working
The executable runs, i get the G3/G4 button, press it, after a while the screen dissapears, 1 flash of what seems to be a cmd-prompt but thats it
The device looks not affected in the whole process.(no white screen/flashes or any other indication of a tranfer of any data)
Bootloader check confirmes the problem by still showing IPL/SPL: 2.18.0001
Its a non-branded QTEK-9100. So no Simlock. Anyone can supply a way to get hSPL on the device?
Click to expand...
Click to collapse
You could try to use another PC, another USB connection.
You could also try to enable Rapi manually (or by using mestrini's WST).
I would try on an other PC though, I have seen troubles with certain stripped/corrupted XP versions and Hard/soft SPL before.
Well Add to your list of not working Os-es WinFLP (strange because just earlier i completed an Trinity HardSpl)
But on my normal XP station the screen does not turn white.
The display is corrupted I see my radio signal status Icon and the Battery Icon in a Black bar,
Below the Date/time
and the rest of the screen is Black with in small green charakters the 'error'
"Unable to open log file ...
Tiny_console_init Done ."
EDIT: Second time it went white... And spl from olipro installed like a charm....
Help me to resolve
Every time i switch on device
IPL 2.17.0001
...
...
SPL 1.01
what is this? how can i resovle it, all questions i will answer, help.
I answered your question in the other thread.
-MyHTC- said:
I answered your question in the other thread.
Click to expand...
Click to collapse
where? please send me url
This is what you have:
IPL 2.17.0001 = G4
SPL 1.01 = G3
Your phone is bricked.
I don’t know of anyone who has recovered from this.