ok, Mousey here on the forums had dumped the Orange UK ROM from his Hermes; he then used buildimgfs to create a proper imgfs image; after this, we then wrote this imgfs to the AKU3.3 ROM (using it as a shell essentially) and the result was a successful flash and his PDA was running Orange UK OS ROM, so it would seem that it IS possible to create images of dumped ROMs, but I would advise that you make sure the NB you create is bigger than needed so as not to fill it completely.
All Working Beautifully.
1. I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
2. I Created imgfs_raw_data.bin File From A Random AKU 3.3 OS.nb File Using "aWaiter".
3. Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools, This Overwrites The imgfs_raw_data.bin File Created In The Previous Step.
4. I Then Merged My imgfs_raw_data.bin With The OS.nb From Step 2 File Using "aWaiter".
5. Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM Using dutty's Rom Koch
6. Finally I Added It To The CustomRUUUpdater Created By Olipro.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
ventinho said:
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
Click to expand...
Click to collapse
currently a shipped Orange UK ROM doesn't exist, and we don't have the capabilities to produce signed files... but since it seems your bootloader is intact, I would suggest you try the KITL trick described on the wiki
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
So you dumped a ROM from a phone and merged it with a shipped ROM that was AKU 3.3? Was the "phone ROM" AKU 3.3 also, and, did your default internet connections remain after flashing?
great stuff guys, you rock!
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
mousey_ said:
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
Click to expand...
Click to collapse
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
I've Backed Up All The Hermes FTP Folder, But Sadly I Don't See A T-Mobile Netherland Dump, Theres 2 WWE Ones In There If You Want I'll Create An Installer Out Of That For You.
Cheers
smarty77 said:
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
Click to expand...
Click to collapse
if you dumped the OS from your Hermes onto your hard-drive, then yes.
also, as I said before... remember to use as large an OS.nb as possible.
Currently I'm looking into modifying the size of the OS.nb itself; hopefully this can be done without generating any bad blocks (even if the attempt fails), but I'll get back to you on that.
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Sleep? What's that?
... wait ...
Oh, I remember now...
Man I really miss it!
ViJay, why are you so cruel as to remind of of such a thing?
vijay555 said:
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Click to expand...
Click to collapse
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
how you create the nbh file?
I Used dutty's nbhtool To Create The nbh File.
Cheers
ok mate thanks a lot.but i have another problem.when i use the command BuildImgfs i get this windows xp message :"BuildImgfs.exe has encountered a problem and needs to close. we are sorry for the inconvenience", and i can t continue the proccess.what the f..ck is wrong?
i must say that you are amazing.you did the unexpected:you gave life to dumped roms.WAY TO GO MATE....
thanks in advance.
Im Having The Same Problem. And I Can't Find Out How To Fix It. When I Do I'll Let You Know.
What Dumped Rom Are You Using?
Cheers
rom dump..
Ok I'm going to dump my rom... can someone tell me, when I dump my ROM is it important to empty my device (hard reset??)... I dont wanna throw my private data on the streets
Or does the rom dumper only dump the rom and dont touch the active part of the device?
I have dumped my ROM and now??
I did the rom dump before i did the upgrade to xda live 2
Olipro can you help me to create a dutch T-mobile recover ROM?
I do not really know how that works (Instructions would be nice!), but as far as i understand that, you can read out the rom from the Hermes to do a backup eg. for XDALive?
T-Mobile Germany even has no shipped rom! Would be nice to construct it!
Related
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Hi killercheung...
where are you find the 1.60 rom ?
and the radio what version is ?
Can you put it in my ftp pls ?
it's always on
ftp://dgmatic.com
user: xda
pass: xda
port: 21
...like this we can have it all
Thanks in advance
Denis
I asked here for you, hopefully it will be available for everyone soon:
http://www.ppcsg.com/forums/viewtopic.php?p=173744#173744
-arebelspy
killercheung, thanks for that... I'm still deciding whether to apply the new rom to my UK XDA II.... is the language of the rom netherlands? or can I have it all in english as it is with the normal O2 rom?
Do we lose anything from the o2 rom/extended rom ?
I'm wondering if O2 do bring an upgrade out if we'll be able to still use it if we've tried this t-mobile 1.60 rom.... hmmmmm
hmmm decisions decisions... do you think its much better than the current o2 rom?
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
satria said:
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
Click to expand...
Click to collapse
mind sending me a copy too ?
thanks in advance
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
killercheung said:
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Click to expand...
Click to collapse
Good news about the T-Mobile ROM. I don't know what they have fixed/patched, but my O2 XDA II ROM never bothered to disconnect the GPRS connection after having spent some time online, not after surfing, not after checking e-mail. Mind you the T-moblile ROM doesn't either, except ....... when checking e-mail, which in my eyes is quite important.
So now I can go back to have my XDA check my e-mail once per hour, knowing that it will disconnect automatically.
(And Satria, thanks for sending me my bubbles
@ ming:
check ur email. Also I've seen ur review at PPCSG forum. Great.
Regards,
satria
Hi,
Just one question. Did any of you that make the update testet with the bluetooth GPS?
If yes, It works? or you still have to install TOWA´s patch?
Regards
JoseF
Re: Some interesting things on the T-Mboile 1.60 update soft
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Hi guys,
I did the update to rom 1.60 and it is great. I have an Imate Pocet PC. the new rom is excellent but with one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well :twisted: :twisted: :twisted: :twisted: :twisted: i there a fix to this.
Thanks,
Gilbert
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
killercheung said:
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Click to expand...
Click to collapse
For NBF, you can use XDAtools to capture the Chinese ROM, I did once with the English ROM and the file size is exactly the same as the one in 1.60 update. So there should have no missing bytes in the saved file.
For the EXTENDED_ROM, no idea how to save in NBF format ..
I have installed the update but TomTom doesnt see the serial ports 4/5.
@axbl
Hi, What do you think about the update? It´s mutch better than before?
You say "TomTom doesnt see the serial ports 4/5."
Have you installd Towa solution?
Regards
JoseF
Gilbert said:
one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well
Click to expand...
Click to collapse
yikes...... did that happen on the old rom as well or did gprs stay connected on the original rom?
I hate the way gprs disconnects on devices.. it's supposed to be always on, and I'd really prefer if it stayed on during suspend etc so that MSN could stay connected, notifying me when I got a message....
Email checking likewise, I'd prefer gprs remained always connected and it'd check email in the background whether off or on, notifying me when it got a new mail.
I can't check the behaviour of my xda II since Im on "roaming" at the moment in another country so no gprs
but can anyone say for sure which way the old vs new rom work in this regard?
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
XDA developer Itsme said:
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
Click to expand...
Click to collapse
I get an error 403 forbidden when I try this link.. odd thing is it was working for me earlier..
-arebelspy
oeps. fixed now.
Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132)
O2 Xda IIs Asian Extended ROM plus Xda IIx Extended Extended ROM
First off I'd like to say that some of you are pathetic to the core. Having said that I also like to add that I believe I can throw any amount of insults and yet the same people will still download in spite of. This brings us back to my first point.
I've posted the M.O. on extracting the Extended ROM from the Xda IIs but no one bothered to even try. Sad is that Xda IIs has been sold out of stock twice or more and yet zero Asian O2 Xda IIs owners came forward.
It doesn't matter anyway. End of story.
RE
Hi Dr. Stein!
Thank you for your postings.
I don't own an IIs so I really look forward to such postings to have an enhanced experience.
Thank you again.
RE
Hi Dr. Stein!
One question.
Whats the difference between the 2 EXT ROMs? Care to elaborate whats added/removed?
Thanks
:roll:
RE
Ooooops! Sorry!
The 1st file is not the EXT ROM.
Umm, first of all I'd like to thank you for providing your ROMs to us. In my case, it's not like I'm not putting an effort in looking for an Asian XDAIIs Extended ROM. But the people that I know, none of them owns an XDAIIs. So I guess you should try to understand that not all people are as fortunate as you are to have a friend that owns an XDAIIs and allows you to copy files off it ... Try not to be bitter and just remember that we are just trying to help each other out here ... Thanks again, doc.
Thanks Dr. Stein! I hope my mongrel 2003SE will now begin to look like an 02 after im done customizing.
Apology
I sincerely apologize for my outburst. It was wrong for me to take on this forum as my wrath does not belong here.
And now for the business proper.
The first zip file contains the Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132) and Radio 1.18.00 and not Xda IIs ROM and Radio as this has not yet been exploited.
The second is the O2 Xda IIs Asian Extended ROM plus Xda IIx Extended Extended ROM which has two folders carrying CABs to be extracted to the folders named.
Dr.Stein
Trying to irritate you again Is it only for XDAIIs or for XDAII also
First file is it similar to dcs or mystery man's version. I mean is
OS ROM :2.06
or
OS ROM : 2.02t1
or
totally different?
. I am asking this as I am on dialup connection and it takes hours to download 17MB here
RE
Hi Dr. Stein!
Just to confirm.
In order to perform the upgrade I'll have to dump all the EXT ROM files (from the 2 folders) into the same folder as the Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132) and Radio 1.18.00 and then run HimaUpgradeUT, right?
2nd question - If I only need S'pore and Malaysia telcos I'll have to edit the AutoConfig file by deleting all other unwanted telcos and re-save it again, correct?
:roll:
You need not to reflash ur device. I have my extended ROM unlocked so I just deleted everything from extended rom and filled it with the one dr. has provided. Did a hard reset and everything came alive. I've to say this extended rom is great except camera doesn't seem to work. I recon if i remove Camera_Patch_10080401.sa.CAB from config. txt, things should be fine with camera as well.
Don't forget to remove TPDISABLE.EXE from config.txt otherwise u won't be able to interact with SE warning msg. Enjoy!
Re: RE
Shikra said:
Dr.Stein
Trying to irritate you again Is it only for XDAIIs or for XDAII also
First file is it similar to dcs or mystery man's version. I mean is
OS ROM :2.06
or
OS ROM : 2.02t1
or
totally different?
. I am asking this as I am on dialup connection and it takes hours to download 17MB here
Click to expand...
Click to collapse
2.06.00WWE
FOSA said:
Hi Dr. Stein!
Just to confirm.
In order to perform the upgrade I'll have to dump all the EXT ROM files (from the 2 folders) into the same folder as the Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132) and Radio 1.18.00 and then run HimaUpgradeUT, right?
2nd question - If I only need S'pore and Malaysia telcos I'll have to edit the AutoConfig file by deleting all other unwanted telcos and re-save it again, correct?
:roll:
Click to expand...
Click to collapse
Negative.
Extract the contents of Extended ROM and Storage folders to the respective named folders existing in your Xda II.
Now run the HimaUpgradeUT.exe from the WM2003SE Xda IIx folder.
rehman said:
You need not to reflash ur device. I have my extended ROM unlocked so I just deleted everything from extended rom and filled it with the one dr. has provided. Did a hard reset and everything came alive. I've to say this extended rom is great except camera doesn't seem to work. I recon if i remove Camera_Patch_10080401.sa.CAB from config. txt, things should be fine with camera as well.
Don't forget to remove TPDISABLE.EXE from config.txt otherwise u won't be able to interact with SE warning msg. Enjoy!
Click to expand...
Click to collapse
Provided the Xda II has already been flashed with WM2003SE ROM and Radio ROM of your choice.
The camera patch is needed for SE customization. Your camera didn't work probably because you did not install the CABs from the Storage folder I have included as an Extended Extended ROM. If you go through the Config.txt you will know what I am talking about.
RE
Hi rehman!
I've the EXT ROM 'unlockextrom' file on my O2. Upon tapping it amessgae prompts out which says
debug
Usage: unlockextrom [-lock | -unlock] [-hide | -unhide]
How to unlock the EXT ROM?
Another question is if I only need S'pore and Malaysia telcos I'll have to edit the AutoConfig file by deleting all other unwanted telcos entries and re-save it again, correct?
Thanks
Locks
Works fine on mine.
RE
Hi Dr. Stein!
Sorry for the repeated question. I was typing when you posted the reply.
Re: RE
FOSA said:
Another question is if I only need S'pore and Malaysia telcos I'll have to edit the AutoConfig file by deleting all other unwanted telcos entries and re-save it again, correct?
Thanks
Click to expand...
Click to collapse
Yes. Just remove the unwanted CABs from the Extended ROM folder and edit the AutoConfig.txt accordingly.
RE
Hi Dr Stein!
I'm getting somewhere now. Thanks for your guidance as I'm able to see my EXT ROM files now on my O2.
BTW, I could not get the screen of the debug you posted although I could get it from the Settings -> Menus
How to do it?
Thanks again
Re: RE
FOSA said:
Hi Dr Stein!
BTW, I could not get the screen of the debug you posted although I could get it from the Settings -> Menus
How to do it?
Thanks again
Click to expand...
Click to collapse
I don't really get you. You could get the debugscreen from Settings -> Menus - where?
Yes Dr. I did copy files in storage folder as well. All those cabs were also installed during extended rom setup as they're mentioed in config.txt file. My problem is that camera applicatin opens but viewfinder doesn't seem to work. Camea version is 2.21 (Build 17576).
Strange
Why does mine show Version 2.50 (Build 15954)?
Are you certain you installed the 2 Camera CABs from the Storage folder?
I'm sure because all other storage apps like extended rom unlocker, view, intellidial and intellipad are installed. I wonder what went wrong with the camera
Could someone tell me how to upload the Dopod_838_Pro_Ver_1.23.707.4_Radio_1.06.00.10_Date_07_21_06 rom file ?
It contains RAW files...
thx,
this is not intended for rom upgrade.
Look at the wiki for more info:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
raw file too rom.exe FR??????
I extracted the ROM one from my Tytn FR and I have upload file RAW. is what a person can do a ROM.exe ftp://xda:[email protected]_ROMs/HTC_TYTN_1.18.256.103_FR_Dumped_ROM.zip
Re: raw file too rom.exe FR??????
It is not possible to convert a dumped ROM to an "exe" upgrade, however you can extract the contents of imgfs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoExtractImgfs
There's some people researching on the Hermes ROMs, we'll post our progress here and in the wiki, so stay tunned
Vodafone V1605 WWE ROM also just uploaded in RAW format.
WIKI Edited.
Cheerio
Howard
Orange M3100 14.123.1.614 dumped ROM uploaded
I haven't combined the 02 raw files as XP puts an EOF marker in the file.
Mog
Moogled said:
Orange M3100 14.123.1.614 dumped ROM uploaded
Click to expand...
Click to collapse
There was another orange dumped rom from 2 days ago, same version in the dumped roms folder. BTW I updated the wiki and put links to both roms, thanks!
How do we actually use the imgfs files? Do we replace them into the ROM and then use that?
bydandie said:
How do we actually use the imgfs files? Do we replace them into the ROM and then use that?
Click to expand...
Click to collapse
nope, you cannot upgrade a rom from a dumped imgfs. In theory, it should be possible to modify the imgfs and create a .nb file which you can replace into a rom, but TyTN uses a new .nbh format which we still don't know how to deal with. So, at the moment this is useless for rom upgrading, but useful for other debugging purposes or if you want to have a copy of all the filesystem...
if anyone is interested on this nbh format I can post some info i've been taking out of hexdump'ing shipped rom upgrades and sniffing usb port during rom upgrade process, but it's still a lot to do and I am not an expert, so any help would be appreciated.
Orange SPV M3100
Does someone have the French ROM for SPV 3100 Orange.
I want to upgrade my TyTn into Orange SPV M3100
Thanks
I dumped my Vodafone UK v1605 2.07.161.1 rom. Should I upload on the ftp or it's no more needed?
I noticed that other dumped are no more on the ftp server.
I thought someone needed it cause it's newer than other Vodafone available on the wiki.
Hi guys,
I reached here via http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
I'm looking for Dumped Roms for my SPV M3100. Under title "DUMPED English ROM from Orange M3100 WWE" the links to two Roms are not there now.
Are these two were removed form ftp?
I need a ROM to get back to Orange Rom (Wm 5 or Wm6.x).
Any help in finding original orange rom would be really appreciated.
Thanks
Hi cooks and chef's,
With hard-spl available for our great Raphael it's cooking time (big thanks tot elite team)!!!
I do not consider myself a complete nOOp and I spend quite some time strugling with the search feature of this great site.
By that I found a lot of pieces of information about changing a rom's (WWE) language (to Dutch for example) but it's still not clear to me how to do it.
Can any of the experienced chefs make a straight forward step by step on how to pull it off (I know how to get extract XIP, SYS, OEM etc.....)?
Thanks in advance for the help guys!!
Greetz Merten
merten3000 said:
Hi cooks and chef's,
With hard-spl available for our great Raphael it's cooking time (big thanks tot elite team)!!!
I do not consider myself a complete nOOp and I spend quite some time strugling with the search feature of this great site.
By that I found a lot of pieces of information about changing a rom's (WWE) language (to Dutch for example) but it's still not clear to me how to do it.
Can any of the experienced chefs make a straight forward step by step on how to pull it off (I know how to get extract XIP, SYS, OEM etc.....)?
Thanks in advance for the help guys!!
Greetz Merten
Click to expand...
Click to collapse
easiest: find a dutch (in your example) rom update. if you got hardspl already then flash this, done.
if that is not possible get someone with a dutch device to dump the ROM for you. dump commands are similar to kaiser. then take an existing OS.nb, and take the part02.raw, use tadzio's imgfstools to put them together into the language you want. I strongly recommend that at this point you insert part01.raw too for example by using XIP2 button in XIPtools as well. all this doesn't need you to play with SYS or OEM at all.
cmonex said:
easiest: find a dutch (in your example) rom update. if you got hardspl already then flash this, done.
if that is not possible get someone with a dutch device to dump the ROM for you. dump commands are similar to kaiser. then take an existing OS.nb, and take the part02.raw, use tadzio's imgfstools to put them together into the language you want. I strongly recommend that at this point you insert part01.raw too for example by using XIP2 button in XIPtools as well. all this doesn't need you to play with SYS or OEM at all.
Click to expand...
Click to collapse
Thanks for the quick reply...
But.....still a bit lost...
I can get OS.nb and the raw files, but then I'm loosing you...(I wish my brain was a pentium quad core processor)
Put os.nb and part02.raw in the language with tadzio's tool? Which part contains the language to put it in.
(what exactly do xip and the raw files contain?)
can you maybe release a step by step walkthrough....( okay I'm a nOOp after all )
merten3000 said:
Thanks for the quick reply...
But.....still a bit lost...
I can get OS.nb and the raw files, but then I'm loosing you...(I wish my brain was a pentium quad core processor)
Put os.nb and part02.raw in the language with tadzio's tool? Which part contains the language to put it in.
(what exactly do xip and the raw files contain?)
can you maybe release a step by step walkthrough....( okay I'm a nOOp after all )
Click to expand...
Click to collapse
ok
do nbsplit -kaiser on the os.nb. then imgfsfromnb on the payload file you get. replace the created imgfs.bin with part02.raw (the .raw is your desired language, yeah?) then do imgfstonb on this. then you have this new payload, you should now insert xip (part01.raw) using xiptools XIP2 write option, for example (there are other ways too). then nbmerge -kaiser on this and you have a new os.nb with your language in it.
cmonex said:
ok
do nbsplit -kaiser on the os.nb. then imgfsfromnb on the payload file you get. replace the created imgfs.bin with part02.raw (the .raw is your desired language, yeah?) then do imgfstonb on this. then you have this new payload, you should now insert xip (part01.raw) using xiptools XIP2 write option, for example (there are other ways too). then nbmerge -kaiser on this and you have a new os.nb with your language in it.
Click to expand...
Click to collapse
Thanks gonna give it a try...!
So, let me get this straight:
I'm trying to cook a dutch rom for a Polaris. I have 2 roms. One WWE and one NLD.
Both ROMS are extracted. How do i extract the part01 and part02.raw files?
I tried something and i got a part02.raw of 4kb... Is that correct?
ok you need to dump a wwe version and a NLD now replace all the Lang_0409 (wwe lang code) with Lang_0413 (Dutch lang code) you should only find one Lang folder in the OEM simply called OEM_Lang_0413 but there are many inside the sys folder and you'll have to replace all of them.
It's not going to work totaly if you take the Lang files from and older QVGA build.
I had alot of problems trying to make a greek rom because I was mixing the lang from Diamond with a sys from Kaiser the roms booted just fine but lots of the apps did not work.. but after I ported the whole SYS from diamond (alsmot) everything worked
I've made several multi language roms and this is how I've done
gullum said:
ok you need to dump a wwe version and a NLD now replace all the Lang_0409 (wwe lang code) with Lang_0413 (Dutch lang code) you should only find one Lang folder in the OEM simply called OEM_Lang_0413 but there are many inside the sys folder and you'll have to replace all of them.
It's not going to work totaly if you take the Lang files from and older QVGA build.
I had alot of problems trying to make a greek rom because I was mixing the lang from Diamond with a sys from Kaiser the roms booted just fine but lots of the apps did not work.. but after I ported the whole SYS from diamond (alsmot) everything worked
I've made several multi language roms and this is how I've done
Click to expand...
Click to collapse
Gullum you rulezzz cant wait for a new rom of yours are you going to make one multilanguage for the raphael?
cmonex said:
easiest: find a dutch (in your example) rom update. if you got hardspl already then flash this, done.
if that is not possible get someone with a dutch device to dump the ROM for you. dump commands are similar to kaiser. then take an existing OS.nb, and take the part02.raw, use tadzio's imgfstools to put them together into the language you want. I strongly recommend that at this point you insert part01.raw too for example by using XIP2 button in XIPtools as well. all this doesn't need you to play with SYS or OEM at all.
Click to expand...
Click to collapse
Nice info,
very helpfull
thanks mate
gullum said:
ok you need to dump a wwe version and a NLD now replace all the Lang_0409 (wwe lang code) with Lang_0413 (Dutch lang code) you should only find one Lang folder in the OEM simply called OEM_Lang_0413 but there are many inside the sys folder and you'll have to replace all of them.
It's not going to work totaly if you take the Lang files from and older QVGA build.
I had alot of problems trying to make a greek rom because I was mixing the lang from Diamond with a sys from Kaiser the roms booted just fine but lots of the apps did not work.. but after I ported the whole SYS from diamond (alsmot) everything worked
I've made several multi language roms and this is how I've done
Click to expand...
Click to collapse
I have dump the 1.90.XXX rom and i have replace all the 0409 with 0804 (simplified chinese). i have also added in the chinese fonts and amend the necessary rgus, but there is an issue. after building the rom and flashing it, although the entire interface is in chinese now, but Chinese (Singapore) and Chinese (PRC) is not shown in regional settings. can you kindly advise? i have tried replacing the os.nb file in the ROM folder to the os.nb file from the official diamond 1.93 CHT rom. the building works but after flashing, it stuck at the first screen ...
please kindly help me.
one side track question, after flashing, the key lock within the settings panel is not working. no icon and unclickable... do you what i may have done to cause this?
Hello everyone and thanks for the thread
I'm trying to translate a ROM to Spanish. Replacing all language files (in the SYS and OEM folder) for the Spanish language (0C0A). But when I install, I get an error "poutlook.exe" and the phone and TFLO3D does not start .
How can I fix it?
Thank you
Garfiel said:
Hello everyone and thanks for the thread
I'm trying to translate a ROM to Spanish. Replacing all language files (in the SYS and OEM folder) for the Spanish language (0C0A). But when I install, I get an error "poutlook.exe" and the phone and TFLO3D does not start .
How can I fix it?
Thank you
Click to expand...
Click to collapse
Something wrong with the modules maybe...
Try putting in the actual files (exe/dll) in the module map in the SYS
Can be a lot of work.... or use different SYS as a base...
Thanks for answering
The exe / dll I have of the Spanish version of the official ROM (OS 19662) and I want to translate into English with an OS ROM 21009.
I serve?
I might say, please, SYS original folders that I keep to upgrade to version 21009?
Thank you
Merten3000, can You say
Thank you
Hi guys, it's me again
As some of you know, I've searched for the boot splash for the german XDA Star and finally, I succeeded with it! But before I can release the whole ROM package for the german XDA Star, I need some confirmation from users with the original firmware:
- is Radio 1.58.27.16 present on the phone? (Start -> Einstellungen -> System -> Geräteinformationen -> Funkempfängerversion)
- is "CE OS 5.2.1622 (Build 18128.0.4.4)" present in Start -> Einstellungen -> System -> Info?
- is 1.31 present as last red line during boot sequence?
- is SPL 1.16.0000 the real original XDA Star SPL*?
*: Soft reset your device while press and hold both Power and Camera button and you could see your SPL version!
I have asked for the Splash and nobody answer...
Here the Splash: (second is the original, first is the new one)
Thanks anyway, I'll see if them are the right ones after the Star is send back to o2!
Original Firmware is the best way
McLin said:
Original Firmware is the best way
Click to expand...
Click to collapse
Sure, but the linked ROM doesn't contain SPL, Radio or Splashscreens, only the OS itself so it's no help!
Hey anime... i've dumped my original o2 rom. Dont know if it contains anything you need (spl, splash) but if it helps you i'm gonna upload it.
But if you're allready done: what about uploading the "shipped" rom for all the other german o2 customers that have been (and will be) asking for the stock rom? Think there will be many grateful users over the next months...
dllngr said:
Hey anime... i've dumped my original o2 rom. Dont know if it contains anything you need (spl, splash) but if it helps you i'm gonna upload it.
But if you're allready done: what about uploading the "shipped" rom for all the other german o2 customers that have been (and will be) asking for the stock rom? Think there will be many grateful users over the next months...
Click to expand...
Click to collapse
Why not uploading? It's good enough for a try and if I'm successful with it, I can upload the whole ROM for all other!
i dropped you a pm
Got it, thanks!
It's harder than I thought to create a whole o2 ROMwith all parts (OS, Radio, SPL, SPlash)! Will need some more time to do that!
animelover said:
It's harder than I thought to create a whole o2 ROMwith all parts (OS, Radio, SPL, SPlash)! Will need some more time to do that!
Click to expand...
Click to collapse
Use KaiserChef from the Kaiser forum. It needs the raw and a basefile (any official Nike), and just rebuilds it from a couple of key presses.
or take splash tools, there is a createnbh.bat and it use the example.txt just write the nbh files in the text file put all nbh in the folder and press the bat...
Thanks for your help, the ROM is nearly finshed but I need some last infos! PLease read the first post and reply here with yes or no to each question!