Related
The original SPL is 1.09 and radio is 1.14. After payment at imei-check.uk, i got the *.unl file (i know it's not support for this phone, but just want to make a test! ). After unlock, of course it not completed, stop when check radio ver, now SPL is 1.04!!! After that i unlock it using pacth radio and Hermes_Sim_unlock_v2.2a, it's successful, but when i insert new sim, i can not input unlock key, it always say i was tried 8 (or more) times, then must wait for timeout, but after along time waiting status still not change! Use mtty for enter command AT but it stop at command AT interface ready!
Any idea?
B.R.
taihv said:
After that i unlock it using pacth radio and Hermes_Sim_unlock_v2.2a, it's successful
Click to expand...
Click to collapse
It's not... on SoftBank x01ht devices post December 2nd 2006, the radio 1.14 is read only. You can downgrade the bootloader (as you already did with imei-check unlocker), you can now change the ROM using the 1.04 bootloader bug, but you can't overwrite the softbank 1.14 radio.
pof said:
you can now change the ROM using the 1.04 bootloader bug, but you can't overwrite the softbank 1.14 radio.
Click to expand...
Click to collapse
That means we can flash other OS ROM and use other sim card ,isn't it?
When will X01HT of post-December be unlocked?
My X01HT has slept for one whole month,i am always waiting for new unlocker release,so i want to know when it can release,as i am a fan of WM5.
WM5 fan on this forum also has some desrie.
somatom said:
That means we can flash other OS ROM and use other sim card ,isn't it?
Click to expand...
Click to collapse
You can flas other provider ROM (softbank radio 1.14 will be kept).
You can't use other simcard, only softbank.
You mean we can flash other lanauge rom on it!!! No matter the phone is unlocked or not?? Somatom, my phone also sleep in the drawer over a month, too
The original SPL is 1.09 and radio is 1.14.After downgrade and unlock with v2a,the SPL is sitll 1.09,but i put another sim card into phone,no sim lock display,but the symbol of GSM is always searching for signal.why?is it unlock or something else?
@Wai Wai: yes, by using bootloader 1.04 CID-checking bug (run ruu twice), check the wiki for more info.
@somatom: softbank devices post 2006-12-02 can't be unlocked.
Yeah~~~~~~~I try now......Please wish me good luck~~~~
My phone is 1.09. Hope it can work
I've got an pre-December X01HT that I originally unlocked using imei-check's unlocker, and then made SuperCID by flashing pof's radio and running his unlocker v2a.
If I run Softbank's upgrader on it, will it stay unlocked, or did Softbank figure out how to re-lock the phones with the upgrade? It's important that I be able to continue to use the phone with both my Softbank and Globe (phils.) sim cards...
Thanks,
- awh
awh_tokyo said:
I've got an pre-December X01HT that I originally unlocked using imei-check's unlocker, and then made SuperCID by flashing pof's radio and running his unlocker v2a.
If I run Softbank's upgrader on it, will it stay unlocked, or did Softbank figure out how to re-lock the phones with the upgrade? It's important that I be able to continue to use the phone with both my Softbank and Globe (phils.) sim cards...
Thanks,
- awh
Click to expand...
Click to collapse
i have no idea why you used both the unlockers, but my x01ht unlocked by imei-check is still unlocked after i burn the new s/b rom. also, i believe it still has supercid since i can still switch between docomo rom and s/b rom.
apply the imei-check unlocker again, and look for welcome.exe in \windows\start up. back it up, and install it whenever you hard-reset. (i don't know if this little program is installed only on s/b rom, tho...) without this program, x01ht will give you a "wrong sim" warning pop-up even though your device is actually unlocked. it kills this sim monitoring process.
qtotter said:
i have no idea why you used both the unlockers, but my x01ht unlocked by imei-check is still unlocked after i burn the new s/b rom. also, i believe it still has supercid since i can still switch between docomo rom and s/b rom.
apply the imei-check unlocker again, and look for welcome.exe in \windows\start up. back it up, and install it whenever you hard-reset. (i don't know if this little program is installed only on s/b rom, tho...) without this program, x01ht will give you a "wrong sim" warning pop-up even though your device is actually unlocked. it kills this sim monitoring process.
Click to expand...
Click to collapse
My device is also still unlocked after ungrade, but can not unlock ExtROM.
How do you do ? Is your device unlocked ExtROM ?
I think that it can not be SuperCID after upgrade, only can unlock SIM.
keiuchid said:
My device is also still unlocked after ungrade, but can not unlock ExtROM.
How do you do ? Is your device unlocked ExtROM ?
I think that it can not be SuperCID after upgrade, only can unlock SIM.
Click to expand...
Click to collapse
you are right. with the s/b rom, ext rom is always locked. however, if you burn the s/b rom and then burn the docomo rom, you can see ext rom is unlockable. i can check the cid status when i am back home.
qtotter said:
you are right. with the s/b rom, ext rom is always locked. however, if you burn the s/b rom and then burn the docomo rom, you can see ext rom is unlockable. i can check the cid status when i am back home.
Click to expand...
Click to collapse
Thanks.
I know that if burn the docomo rom can unlock ExtROM(I am using this one).
Do you know the way that unlock ExtROM on s/b rom ?
My friend did that on Bootloader1.09 and New radio rom. But he used pof's unlocker(v2a). I think that it is diferrent between pof's unlocker and ime-check unlocker.
keiuchid said:
Thanks.
I know that if burn the docomo rom can unlock ExtROM(I am using this one).
Do you know the way that unlock ExtROM on s/b rom ?
My friend did that on Bootloader1.09 and New radio rom. But he used pof's unlocker(v2a). I think that it is diferrent between pof's unlocker and ime-check unlocker.
Click to expand...
Click to collapse
i think no one has figured out how to unlock ext rom on x01ht yet. i use the docomo rom as well since x01ht does not support a2dp.
keiuchid said:
I think that it can not be SuperCID after upgrade, only can unlock SIM.
Click to expand...
Click to collapse
my cid was VODAK801. so, it was my misunderstanding that i thought my device still kept supercid after burning the s/b rom. it looks like it's been fixed to the s/b cid although i use it with the docomo rom now after unlocking by imei-check and burning the new s/b rom. interesting.
awh_tokyo said:
I've got an pre-December X01HT that I originally unlocked using imei-check's unlocker, and then made SuperCID by flashing pof's radio and running his unlocker v2a.
Click to expand...
Click to collapse
i have been always thinking, somehow, that imei-check's unlocker unlocks sim-lock and changes cid status to supercid, but it does not change cid at all? is it the reason why awh used pof's unlocker after imei-check's unlocker??
Yes, imei-check unlocker downgrades to bootloader 1.04, removes SIMLock and sets the device SuperCID, but the supercid status is lost when another ROM or radio ROM is flashed.
In my unlocker, Herm_Unlock_v2a.exe makes the SuperCID stay forever once patched radio has been flashed.
qtotter said:
i have been always thinking, somehow, that imei-check's unlocker unlocks sim-lock and changes cid status to supercid, but it does not change cid at all? is it the reason why awh used pof's unlocker after imei-check's unlocker??
Click to expand...
Click to collapse
Yes... I only applied pof's unlocker recently. Before, I never found the need for supercid, since I could just drop down to bootloader 1.04 to put a different rom on... But now the newest roms can't be unlocked if the device is not supercid.
Well, I'm going to hold on until the bitter end, will apply Softbank's rom on 3/31 if nobody has come up with the new password at that point...
awh_tokyo said:
Well, I'm going to hold on until the bitter end, will apply Softbank's rom on 3/31 if nobody has come up with the new password at that point...
Click to expand...
Click to collapse
i agree and that's the best way to go for now. i'll do the same.
pof said:
Yes, imei-check unlocker downgrades to bootloader 1.04, removes SIMLock and sets the device SuperCID, but the supercid status is lost when another ROM or radio ROM is flashed.
In my unlocker, Herm_Unlock_v2a.exe makes the SuperCID stay forever once patched radio has been flashed.
Click to expand...
Click to collapse
now, i understand... well, i have lost a chance to run pof's unlocker to make my x01ht to keep supercid for good since i have burnt the new s/b rom once. on the other hand, it could be the reason why they had mine repaired since someone who used pof's unlocker got rejected by s/b to have his x01ht repaired... it's catch 22...
I did
I could unlock ExtROM on X01HT(Upgrade to New ROM=1.33.761.4, Radio ROM=1.14.00.10, Protocol=32.50.7018.00h).
I did as follow's way:
1. simunlock by imei-check unlocker.
2. Burn the Docomo rom.(=already unlocked ExtROM)
3. use pof's unlocker(maybe make device SuperCID)
4. Upgrade rom with RUU_X01HT_1.33.761.4.1.14.00.10
5. Now I can use docomo sim and softbank sim, also can unlock ExtROM.
keiuchid said:
I could unlock ExtROM on X01HT(Upgrade to New ROM=1.33.761.4, Radio ROM=1.14.00.10, Protocol=32.50.7018.00h).
I did as follow's way:
1. simunlock by imei-check unlocker.
2. Burn the Docomo rom.(=already unlocked ExtROM)
3. use pof's unlocker(maybe make device SuperCID)
4. Upgrade rom with RUU_X01HT_1.33.761.4.1.14.00.10
5. Now I can use docomo sim and softbank sim, also can unlock ExtROM.
Click to expand...
Click to collapse
Just to make this clear... which rom did you have when you ran the imei-check unlocker?
To unlock ExtROM device must be SuperCID, to make it SuperCID device must have a flashable radio, so obviously he was running the rom PRE december 2nd with 1.06 bootloader on it.
thanks pof. that's what i thought but wanted keiuchid to make it clear to everyone as it could confuse some people that it could be done with the post 12/2 rom.
pof said:
To unlock ExtROM device must be SuperCID, to make it SuperCID device must have a flashable radio, so obviously he was running the rom PRE december 2nd with 1.06 bootloader on it.
Click to expand...
Click to collapse
Yes, you are right.
excause me , can anyone tell me how to check is it the superCID or not .. ?
@keiuchid' quote ---
I did as follow's way:
1. simunlock by imei-check unlocker.
2. Burn the Docomo rom.(=already unlocked ExtROM)
3. use pof's unlocker(maybe make device SuperCID)
4. Upgrade rom with RUU_X01HT_1.33.761.4.1.14.00.10
5. Now I can use docomo sim and softbank sim, also can unlock ExtROM.s quote:
questions:
on step2- did you get the rom docomo rom from the wiki hermes ROM upgrade link list and what SPL value at the time?
on step4- after the upgrade softbank rom, what is the SPL
on step5- how do you able to use docomo and softbank sim and unlock the extrom - because if you have now the softbank SPL 1.09 and radio rom 1.14, you should not able to unlock your SIM. please explain. thanks in advance.
(may be i'm missing something here)
Please note that keiuchid's X01HT was sold Previous December 2nd, this is the most important, otherwise he could not have done it.
otoro_315 said:
on step2- did you get the rom docomo rom from the wiki hermes ROM upgrade link list and what SPL value at the time?
Click to expand...
Click to collapse
SPL on his original rom was 1.06, then he applied imei-check unlocker, so the SPL downgraded to 1.04. After this he applied the DoCoMo ROM found in the wiki, which has SPL-1.04.
otoro_315 said:
on step4- after the upgrade softbank rom, what is the SPL
Click to expand...
Click to collapse
On this step the SPL is upgraded to 1.09, but he purchased imei-check unlocker, so he can downgrade it to 1.04 at any time, by just applying the unlocker.
otoro_315 said:
on step5- how do you able to use docomo and softbank sim and unlock the extrom - because if you have now the softbank SPL 1.09 and radio rom 1.14, you should not able to unlock your SIM.
Click to expand...
Click to collapse
His X01HT simlock was removed on step 1, and Flashing a ROM does NOT re-lock it. So, once SIM-Unlocked, it's SIM-unlocked forever.
His device was made SuperCID with Herm_Unlock_v2a.exe on step 3, he applied it while running the 1.16 patched radio, so his device will be SuperCID forever.
After this he flashed Softbank's ROM with "read only" radio, now he has a Sim-Unlocked and CID-Unlocked device, where he can switch ROMs and put any provider's SIM to his liking, but he will keep the Softbank 1.14 radio ROM at least until we see any ROM upgrade which is able to overwrite this radio ROM (which is not available yet).
Hope this makes the situation clear to you all
Ohh yeah baby,
It's been done. They havn't said it has been done, but I assume that it has since I have checked their sice a couple times a week for the past couple of months just waiting for something to be said. They have removed the message about Softbank phones being unable to unlock. So I "ASSSUME" that you can now fully crack your phone with Softbank v1.09. Also for the simle fact that it is version 4 http://www.imei-check.co.uk/M3100v4Unlock.zip of their software instead of version 3. So, now we can crack, our X01HTs, we can downgrade to 1.04, flash with a English rom, then downgrade again to 1.01 and then flash with our custom splash screens.
Imei-check has cracked post December Softbank phones.
www.imei-check.co.uk
-Joe.
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Success!!
I tried as soon as I saw this post, I had previously bought the IMEI thingy (technically speaking) and realized that my phone was a post Dec. (I originally thought I got it in November, but I realized that I was just an idiot)
anyways a couple minutes later I'm using my Docomo Card on my unlocked Softbank phone.
I'm not gonna lie, it was well worth the $40.
Now, I am not sure if my mail is working. So you guys have any idea about the Docomo mail if that works or not on the Hermes?
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
keiuchid said:
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
Click to expand...
Click to collapse
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i meant "this problem is not coze of UK IMEI Unlocker", it will be happen on another hermes too)
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Asukal said:
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i didnt mean this probelem is not coze of UK IMEI Unlocker, it will be happen on another hermes too)
Click to expand...
Click to collapse
Thank you your attention.
I don't flash other rom, only use unlocked this.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
I also have the same situation, will it be able to unlock if mine is downgraded to 1.04 and flashed HK rom.
doitfu said:
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
Click to expand...
Click to collapse
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
keiuchid,
Same here. I don't understand what the process is. If "they" means imei-check and if you have their written response on the process, please copy that and paste it in your reply here. It doesn't matter if it's long.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
mj13 said:
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
Click to expand...
Click to collapse
It's ok , i have bought the unlocker,it absolutely works on my X01HT.so i enjoy it now.
qtotter said:
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
Click to expand...
Click to collapse
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
keiuchid said:
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
Click to expand...
Click to collapse
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
doitfu said:
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
Click to expand...
Click to collapse
I also can not do.
My x01ht is before 12.2, so can not do ?
mj13 said:
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
Click to expand...
Click to collapse
It finally succeeded.
Thanks a lot.
Hi all.
My Softbank has b/l 1.04 and the 1.14.00.10 radio on it. To use this method,which rom do I use for the 1.09 b/l? I looked at wiki,and the only one was a Japanese version for softbank. It does not match my Softbank, so I am not real sure which way to go. Is there a Dopod rom with the 1.09 b/l?
BTW.....My Sb is an HERM200 with the Dopod splash screen and was shipped with the Dopod 1.23.707.4 WWE Rom, IPL 1.01,B/L 1.04, and the dreaded 1.14.00.10 radio on it.
Thanks................Later
Any ideas? I tried searching the forum already but i can't get a it?
Start in bootloader mode, download mtty.exe and start it, connect via USB.
Then type "info 2" - without the quotes.
All info here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
so it is locked or unlocked?..I have the SPL-1.04 and the Orange rom but have managed to installed the 1.27.00 radio rom withouth problems...but now I want to update the ROM with the SA one...
Regards,
Primoz
p.s. In the case it is not unlocked could I use the poh unlocker again?
Pc78 said:
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
Click to expand...
Click to collapse
This is a SuperCID, your Hermes is completely unlocked
hmmm.....
I have message HTCSuperCid..... is this ok? Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
please help
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
Thx pof!...I was just on the way to write you a PM but you were quicker
Regards,
Primoz
franula said:
hmmm.....
I have message HTCSuperCid..... is this ok?
Click to expand...
Click to collapse
Yes this is OK too.
franula said:
Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
Click to expand...
Click to collapse
Read: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
BTW, you will be able to use shipped 1.27 radio.
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
@pof
I tried to upgrade to 1.27 radio and i have same problem
madmattco said:
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
Click to expand...
Click to collapse
Yes, once it is SuperCID you are able to flash any shipped ROM in NBH format.
franula said:
I tried to upgrade to 1.27 radio and i have same problem
Click to expand...
Click to collapse
please READ: to flash an exctracted radio you need bootloader 1.04, your bootloader is 1.09. The radio 1.27 is offered in two different formats: shipped (NBH) file which you will be able to flash and extracted (NBF) file which you will not be able to flash unless you downgrade your bootloader to 1.04.
@pof (hi again LOL!)
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
mrvanx said:
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
Click to expand...
Click to collapse
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
mrvanx said:
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
Click to expand...
Click to collapse
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
pof said:
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
Click to expand...
Click to collapse
Sweet! Would it be a good idea to stick with 1.01 MFG if im planning on pursuing the GPS thing (IF we get past any risky stuff!), or even if i want to use some cooked goodies later on?
@mrvanx: Yes, it's the best one for playing with this kind of stuff
Please help Pof
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
basilrsa said:
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
Click to expand...
Click to collapse
Your CID is the part just after "HTCS"
So in your case you get (from info 2) "HTCSQTEK_001ÖUSB" so your hermes is an English HTC branded device, your device is not SuperCID yet.
Check this post to see which it is (im only going by memory)
EDIT: I upgraded to the 1.27.00.00 radio yesterday, aslong as you use the signed released version (the first option on the related thread) you should be ok, dont use the extracted one. You MUST be SuperCID to upgrade the Radio (covering ones ass).
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Thanks Pof
pof said:
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Click to expand...
Click to collapse
Thanks for your info Pof, but how can I down grade to SPL 1.04
Sorry for the stupid question but all this is still new to me.
I will really appreciate it.
Thanks
basilrsa: read here:
http://forum.xda-developers.com/showthread.php?t=291827&p=1122696
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
Hi,
I'm getting the following string:
HTCSQTEK_H10é8Ã3HTCEUSB>
but I don't know how to decode it... Is this a super CID or not?
Thanks in advance!
Mogg
Hi, I'm having problem downloading this file....ftp://[email protected]/Uploads/Hermes/HERM_Radio_Only_1.16.00.00_CustomRUU.rar
Anyone here has a good link.
Have a nice day.
BR,
LogoMan
ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.16.00.00_CustomRUU.rar
You got it here too:
ftp://xda:[email protected]/Hermes/Extracted_Radio_ROMs/HERM_1.16.0.0_type2_radio.rar
But, since it's quite old this radio comes in .nbf format and without Custom RUU.
VivaErBetis said:
You got it here too:
ftp://xda:[email protected]/Hermes/Extracted_Radio_ROMs/HERM_1.16.0.0_type2_radio.rar
But, since it's quite old this radio comes in .nbf format and without Custom RUU.
Click to expand...
Click to collapse
Hi VivaErBetis, I'm having problem unlocking my X01HT using v3a unlocker, it say phone unlocked and still ask for the network code, strange thing is when i type numbers ok button never highlight and my radio version remain 1.46 as i read the FAQ it should be 1.16, can you guide me?
Have a nice day.
BR,
LogoMan
LogoMan said:
Hi VivaErBetis, I'm having problem unlocking my X01HT using v3a unlocker, it say phone unlocked and still ask for the network code, strange thing is when i type numbers ok button never highlight and my radio version remain 1.46 as i read the FAQ it should be 1.16, can you guide me?
Have a nice day.
BR,
LogoMan
Click to expand...
Click to collapse
same here i need to change my radio from 1.46 to 1.14 or 1.16.
i was tried and unlocked done with radio 1.14, after i run v3a automaticaly changed to 1.16. (unlocked done), but when i bought another one.. i get radio 1.46 on my device (x01ht), so i need to install 1.14 or 1.16.
i use ruu custom ftp://xda:[email protected]_radio.rar
and ftp://xda:[email protected]_CustomRUU.rar but did not change my radio ..still 1.46 any solution please.....
regards,
b.
Simlock still there
Hi
Did you reslove this? I have the same problem with a HTC HERM 300. The unlock process runs, but the rom is not updated. There are many blogs telling us that we have to get 1.16 radio version bu not:
- Where from
- how to install it
- how you get in to install/check it if the simlock is still there
Installing the unlocker tool v3a will install radio 1.16. It is part of the update process, when you downgrade your SPL to 1.40. You also downgrade your radio to 1.16.
If you are trying to unlock the xo1ht's, there has been some problems with unlocking this model, try running a search to see what is said.
Cheers...
Also to find the standalone radio rom do a search for "Hermes radio repository", use CRC's mirror as the other 2 don't work. You'll find it there.