Related
Any idea? I have to QTEK 8500. One upgraded nicely to 6.1 - the other gives me Error 270 after 5% flashing.
How can I bypass this?
The wiki seems not to exist at least at the moment (timeouts on requests), so I am lost here to know what to do.
Please advice
270 during flashing
First of all - as in instructions to flashing - make sure the phone is unlocked, both aplication and the other unlock.
If it still happens then I had the same thing. I used the clean "boring" ROM. After I changed the bootloader to a newer version, I was ok. So first flash the bootloader - it must be given on the same page as the rom file, and keep your fingers crossed - 'couse if it doesn't work you are in for a problem with a brick.
It should actually take a few seconds only.
After that, flash the new rom, should be ok.
No bootloader update - where is it?
The rom is from the article at http://forum.xda-developers.com/showthread.php?t=374397
(6.1 standard).
So, tell me - Where can I Find the instructions on how to update the boot loader?
Thona said:
the other gives me Error 270 after 5% flashing.
Click to expand...
Click to collapse
is it "corrupted image" error? if yes - READ THE ****ING MANUAL carefully and make sure you have done all the steps in it
Hi,
I had the same problem as you....
My phone was correctly unlocked, but it won't pass the 5% after a first try when i went to 97% (communication error). I was stuck on the nice Erofish sun starting pictures.
I tries many times to flash with the 6.1 standard, but it won't go through the 5% limit (the phone turns off at 5% but it was fully loaded). So I downloaded all the wm6 roms available in this great forum, try to flash them but it was not working (still stick at 5%).
So I doanload a 5.0 rom (Expansys forum : http://www.expansys-usa.com/ft.aspx?k=73618) and was able to flash my phone....
Then after I tried again to reflash with the Erofich rom, and was able to do it. So now, I can use my phone again with the great rom.
Regards,
F.
is it "corrupted image" error? if yes - READ THE ****ING MANUAL carefully and make sure you have done all the steps in it
Click to expand...
Click to collapse
I did - I can redo them, but this is the second phone I try to flash What step do you think I am missing? And it IS the corrupted image error. Is the application unlock wrong?
fdecourt said:
Hi,
I had the same problem as you....
My phone was correctly unlocked, but it won't pass the 5% after a first try when i went to 97% (communication error). I was stuck on the nice Erofish sun starting pictures.
I tries many times to flash with the 6.1 standard, but it won't go through the 5% limit (the phone turns off at 5% but it was fully loaded). So I downloaded all the wm6 roms available in this great forum, try to flash them but it was not working (still stick at 5%).
So I doanload a 5.0 rom (Expansys forum : http://www.expansys-usa.com/ft.aspx?k=73618) and was able to flash my phone....
Then after I tried again to reflash with the Erofich rom, and was able to do it. So now, I can use my phone again with the great rom.
Regards,
F.
Click to expand...
Click to collapse
Thanx! it worked!!!!
Thona said:
What step do you think I am missing?
Click to expand...
Click to collapse
Soft SPL aka SSPL aka USPL
Häh? Sorry, but where is that in the original documentation? I must totally miss it. I follow the instructions in the post verbatim.
It's included in the directions. Problem is, your phone is probably Application Locked. Try running the Application Unlock, then run the SSPL.lnk. When you run SSPL, it should put the phone into a virtual "bootloader" screen. This is where the RUU will run the upgrade process. This should get you taken care of. If not, let me know, we'll see what we can get going for you.
Hello
I have the same problem but when I flash with this original rom after 5% telephon turns off and it shows error 294 invalid vender ID
Anyone helps
Somehow i made hard reset and it works now
Hi there everyone.
I have just bought a new HTC Cingular 8525 but it is running windows mobile 5. I would like to upgrade but I cannot find any downloads or instructions on how to do so. I do not want to brick up my new phone. Does anybody know a download link to upgrade to the latest windows mobile version that will work on my phone. Its an american bought phone which is unlocked and I am using it in the UK on Three. It used to be locked to at&t and I am pretty sure much of the at&t rubbish is slowing my memory and speed of the unit. If I were to upgrade will the phone still be unlocked?
Rom version is 2.15.502.3
Rom date is 04/09/07
Radio version is 1.40.30.00
Protocol version is 32.73.7020.16H
Operating system is (build 15706.3.5.2)
I am all new to this and would appreciate any advice idiot proof I have flashed many PSPs and other things but nothing like this.
As I have just got the phone I am still trying to work out how to use it so I have no idea how to do a Hard or Soft reset and have no idea about the roms
Sorry to waste your time
Please help
Rob
You should read through the Hermes wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Make sure you install hardspl! If you install the "official" AT&T WM6 install hardspl again, your phone will stay unlocked, even with custom roms. If you flash one of the big storage roms, then go to try another, flash the "official" rom before flashing another custom rom.
Read the wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I would also suggest making sure your phone is "super cid" before flashing custom roms, you'll also be able to flash from an sd card if you are super cid.
Read a bunch before flashing any radio roms!!!
Read, read, and re-read before you flash, and you should be fine. They have made the process fairly straight forward, but you can never be too sure. I have never "bricked" my phone, and I jumped in with both feet!
Mustn't flash a lot then because if you did you will end up with a brick sometime... I've always been able to recover my Hermes but there is STILL the possibility it won't.... one day...
ultramag69 said:
Mustn't flash a lot then because if you did you will end up with a brick sometime... I've always been able to recover my Hermes but there is STILL the possibility it won't.... one day...
Click to expand...
Click to collapse
I guess I have been lucky, but I'm sure I haven't flashed as much as others on here. But, I tried to follow the wiki, and tried to learn from others mistakes before I made some of my own. So, I figure if I can flash my Hermes, others should be able to do the same. And I have read up on the issues for when you "brick it", just in case.
I flashed several roms from the beginning (when I got my hermes), and learned a bunch. Then found what I needed/wanted in a rom, and spent days and days and days reading through many threads to find ones that fit me. I actually tried not to flash too much, but that can be a hard temptation to overcome.
So, just trying to pass on what has worked for me, to avoid the hard resets and such.
I would like to attempt cooking my own rom, and have read through tons of info on it, and played with some kitchens. Still working on learning that stuff, it'll give you a good appreciation of what the chefs around here do.
Whenever i get to the update part of the software my htc turns itself off and disconnects?
I then get the error 260?
robiscool said:
Whenever i get to the update part of the software my htc turns itself off and disconnects?
I then get the error 260?
Click to expand...
Click to collapse
I haven't ran into that one, but I went to the top of the page, clicked search, and typed in "error 260" (without the quotes). And got this http://www.google.com/cse?cx=000825...r+260&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
hopefully one of those will help you....google is your friend
I found out that its because I'm running vista. I tried to view Mr. Vanx's guide but its no longer there at this link..
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
So I am a bit stuck as I tried to do the following on here..
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
With no avail. It wont even let me install the HARD-SPL as it just gets stuck in bootloader mode with the error 260.
I have no idea what to do now. This process needs to be simplified more
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
Now make sure your device is on and activesync (or for vista users the WMDC) is running on your PC
Click to expand...
Click to collapse
I don't have anything running vista.
I still got the same error
thanks for your help though!
Go to post 1160 on page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
It tells you how to Hard SPL your Hermes with the sd card method. It also gives you ALL the apps needed.
After you Hard SPL your phone you can use the sd card method to flash a new OS. Flashing a new OS though requires you to drop steps 5 & 6 (you don't need sspl.exe once you have Hard SPL). Just remember though that the bootloader won't recognize any sd card bigger than 2gb...
Cheers...
Thanks for that. Its just now I have a problem where my phone is stuck on the Tri-Colour screen
Did you format the sd card fat32 (they are default format FAT) and rename the .nbh file to "hermimg.nbh"?
Is the sd card 2Gb or less?
You're on bootloader, is your SPL 1.09 des? If yes then insert the sd card and reset.
Cheers...
it might be an issue with activesync
i read somewhere before that activesync 6.1 won't sync with WM6 on vista machines.
I had to downgrade mine to ActiveSync 6.0 to get mine working again.
just an idea that might work
Hi,
I often get PMs from people having the Format Failed error.
So I decided to read all the threads in this forum talking about that problem.
First: There are at least 2 reported cases of getting the Charmer alive again.
Knowing that it is possible but not well documentated I decided to start figuring it out myself.
So here is everything I found out so far:
There is a special not fully known combination of flashed ROMs that can fix the problem.
It has something to do with the EPPROM and only happens in the Charmer. The prophet using the exactly same EPPROMs don't have that problem.
And the Prophet is the key to fix the whole thing.
There IS a first package of ROMs and a manual how to flash them. I hope some people having that problems still have their Charmers and are willing to try it out.
How to use it:
-Put your Charmer into bootloader mode.
-Kill Active Sync.
-Connect the Charmer to your PC
-Run the Run_Me.bat file. Ignore all the other files.
-Click the things in the RUU like normal.
-Followe the instructions you can see in the comand Window.
Download:
-http://rapidshare.com/files/295942647/Format_failed_fix.zip
Hope we can get the whole mess fixed finaly.
Reserved for some other day.
thanx a lot, I try it. Its a second charmer I have from a friend with that problem. My charmer works fine with win6.5 !
Nice to hear that there are testers for it. Please do exactly what I said otherwise it won't work.
OK, I have IPL 3.08.0001 and SPL 3.08.0001
I try your batch and when the first update utility starts with (aku1) I got an error 238: File read. Can not open requestet file. Is the first rom broken?
I flashed the second rom by myself (Prophet.nbf) and it flashes till 95% than stops with an error. rom not for your device.
you have the aku1 rom again? perhaps its broken.
Maybe it is broken. I don't know. You get the error cause you haven't flashed the first ROM. I don't have the ROM again. That was the only copy I found in the web. Maybe you can find one.
ChrBeck said:
Maybe it is broken. I don't know. You get the error cause you haven't flashed the first ROM. I don't have the ROM again. That was the only copy I found in the web. Maybe you can find one.
Click to expand...
Click to collapse
Hallo again my friend.
You know I am one from the people that PM you for this problem
I did not want to bother you again,so while trying to search for the AKU1 rom,I found your post.
I am downloading it right now,and I will let you know.
Thanks a lot.
The AKU1 out of it is brocken and I wasn't able to find a new one till now. So IT WON'T WORK!!!!!!! If you have got a Aku1 tell it to me otherwise this projekt is stuck.
Choop said:
OK, I have IPL 3.08.0001 and SPL 3.08.0001
I try your batch and when the first update utility starts with (aku1) I got an error 238: File read. Can not open requestet file. Is the first rom broken?
I flashed the second rom by myself (Prophet.nbf) and it flashes till 95% than stops with an error. rom not for your device.
you have the aku1 rom again? perhaps its broken.
Click to expand...
Click to collapse
Well,I have exactly the same problem.
The AKU1 rom can not be flashed.I don't know if it is broken or not.
But I noticed that the size is 70,5 MB,while others are 71,2 MB...
Is there a possibility to get another AKU1 rom from somewhere?
ChrBeck said:
The AKU1 out of it is brocken and I wasn't able to find a new one till now. So IT WON'T WORK!!!!!!! If you have got a Aku1 tell it to me otherwise this projekt is stuck.
Click to expand...
Click to collapse
If YOU,the MASTER, were not able to find an AKU1 rom,Ithink it is useless for me to google for it...
Thanks for your interest and your efforts....
I found one. But it was bad. I'm not the master. I'm not even good compared to the real masters of the old days. You can try to search one. I stoped searching when I found the first. So there is still hope.
ChrBeck said:
I found one. But it was bad. I'm not the master. I'm not even good compared to the real masters of the old days. You can try to search one. I stoped searching when I found the first. So there is still hope.
Click to expand...
Click to collapse
I know that you have tried,although you did not have to.I was just joking,please don't take it as an offence!!
I made a quick search,but nothing.I know that AKU1 is very very old.But is there a different term to search for?I mean,searching for AKU!,does not lead anywhere.Is there a specific name for the rom to search for it?Does it matter if it is English or German?I suppose it must be WM5...
It has to be Charmer WM5 with IPL and SPL 1.x . The Language doesn't matter.
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..