Orange m3100 rom - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

hi all, can someone tell me the radio version currently used on the non 'edited' perfectly same as the shop orange M3100's out at the moment?
also does anyone have a copy of there rom for an orange m3100 currently used who would be willing to send it or post on rapidfiles? to try and fix my current radio problems.
thanks all
Dan

what radio problems you getting? im having troble with my m3100 too. its losing connection all the time, and freezing up/not waking up from sleep! ive tried everything, flashing different roms/radios etc, nothings working also sometimes when i turn on my phone i get NO GSM, and some times it says R NONE and P NONE
:S

Currently running radio 1.27 with XDA Live 2.1 on my M3100 (Orange UK) with no major problems. I think the original radio was 1.06.

yeah it was radio 1.06

bomber456 said:
what radio problems you getting? im having troble with my m3100 too. its losing connection all the time, and freezing up/not waking up from sleep! ive tried everything, flashing different roms/radios etc, nothings working also sometimes when i turn on my phone i get NO GSM, and some times it says R NONE and P NONE
:S
Click to expand...
Click to collapse
my original problem is on this thread
http://forum.xda-developers.com/showthread.php?t=297691
needless to say i have the same problems are you and i cannot seem to fix it. downloading the 2 radios versions of 1.06 and will see if that solves it. doubt it tho

i have downgraded to 1.04 bootloader, when i type rtask a in, it enters in the radio bootloader, but then you cant do anything else, it freezes so to speak.
I think i have a corrupt CID and/or Radio stack.
Ive upgraded rom after rom or radio and OS, with no success.
it's doing my head in!
also sometimes i load my phone up and i get the radio version displayed, then other times i just get NO GSM. so whats going on?

For French Swiss Orange M3100 I passed to WM6 ave the Rom 3.22.200.4
The version of the radio and 1.34.00.10
The unit functions perfectly well M3100 is not guaranteed any more can desimlocké But I can install any Rom

bomber456 said:
when i type rtask a in, it enters in the radio bootloader, but then you cant do anything else, it freezes so to speak.
Click to expand...
Click to collapse
radio bootloader has no echo... you can type 'rversion' and hit enter and verify if it answers, but you won't see anything you type, only bootloader's response.

ahh, yeah that works. it returns the value 0108 and nothing else.
my problem is the CID/IMIE/GSM is so unstable, sometimes it will work then half way through a call it will cut out but still show as connected. sometimes i softrest and it says NO GSM where the radio version should be. and wont connect. also some times it displays R NONE and the one underneath it as NONE too. i read somewhere that someone had exactly the same problem,just i dont know if there is a way to fix it.
currently the versions are:
IPL-1.00
SPL-1.04
Its superCID after running the unlocker version 3.
M 05
S 04
B 06
R 1.16.00.00
P 32.53.7018.01H
D 1.20
i have no idea how to fix it, ive read the wiki over and over, tried the common upgrade problem fixes for the radio stack and still no change. any help would be great.
Thanks.

Related

Please kindly help me downgrade to Radio 2.19.11

Hi!
long time viewer first time poster.
I have G4 CID LOCKED Cingular 8125 with mfrazzz's Crossbow Reloaded 1.7.1 I have wizard love Rom as Base.
I really tried hard to update (I guess it is really a downgrade) my original Radio from 02.25.11 to 2.19.11 but no matter what I do, it failed.
I tried with every romupdateutility_wizard_noid.exe i could find but I get the same result everytime.
ON PC: I get 260 Error (tried in two machines same error message)
and
On my Wizard: stuck in this 3 colored screen. I see 3 color screen with "RUU" in right upper corner and "USB" on left bottom with IPL/SPL version showing in red If i press reset button, it will boot back to mobile windows fine.
Can anybody help me?
My rest device info:
ROM Version: 2.18.0.0 WWE
ROM date:2/14/06
IPL/SPL: 2.25.0001
GSM:02.25.11
Protocol version? 4.1.13.12
ExtROM version: faria V5.0
My Downgrade
All I did was use the rom upgrade utility from the "wizard love rom" (the one that is in Italian) and the T-mobile radio rom listed in the Wiki.
Worked like a charm!
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
nic2mit said:
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
Click to expand...
Click to collapse
Is your device actually booting up? If so, just download one of the radio ONLY roms. It won't matter whether you have a CID locked phone or not and the radio ONLY rom will not touch the IPL/SPL.
Having said that, is there a reason why you want to downgrade to 2.19? Are you having missed calls issues?
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Probably you read this already
xdawiz said:
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Click to expand...
Click to collapse
A little bit off regarding your initial post but here´s good feedback on how both radios behave.
http://forum.xda-developers.com/showthread.php?t=312834
I've had some problems as well.
I used the tool that came in the download to downgrade to 2.19 (I am having missed calls problem) and it won't.
I'm using a Windows Vista and already did the whole thing to update drivers with the one given on the forum over here, yet, everytime I run the thing it crashes and then I have to go through it all over again.
Its like the driver just doesn't work anymore, even though I have tried "re-updating" it to the one that I downloaded here, unlike the real Roms this one just won't go throguh and wait for the 3 colored screen to come up, just freezes before.

"no GSM" problem. All workaround posted doesn't work! Pls HELP!!!

Hi all,
First of all I want to let you know that I did search the forum for a solution. In fact, I found a lot of workarounds but none of them actually worked.
Let me give some details about my problem: My Hermes was working fine. I was running the official WM6 ROM supplied by HTC, so no customized ROM here.
It was going fine until the WM frozed. Then I soft reset the device and after that I never got cellular signal again.
While booting the device I got the message: "no GSM".
First thing I tried was to flash a new radio ROM. In all the attempts the progress bar never moved from 0% and after a while I got the communication problem error.
Then I tried flashing a whole ROM. This time the progress bar stopped at 81%. Apparently in the first 81% it flashes the OS and in the last 19% it writes the radio. Anyway, I tried this a few times and never finished.
In fact, after every communication error message I got stuck in the bootloader screen.
The only thing that works is to flash a ROM WITHOUT the radio!!
Is there anything I can do to save my phone or am I condemned to use my Hermes as a phone-less pda?
I tried everything I found in the wiki/forums, but I couldn't find a working solution.
I suspect that the blocks of memory where the radio data reside got corrupted, could that be possible?
PLEASE HELP!
thanks in advance!
Chris
A similar thing happen to me several months ago. While on a call my phone froze and when I soft-reset it the dreaded 'No GSM' issue appeared. I tried flashing radios/full roms/etc, but nothing worked. I ended up sending my phone to the htc repair facility and they fixed it at no cost. (Other than not having a phone for ~10 days)
Thanks dang, but I don't have a HTC service center where I live (Argentina, LATAM)
I'm faithful that the people of this wonderful community will be able to help me.
Just for curiosity, where did you send your device? Is it in the US?
cheers
sounds like a hardware problem to me...
Hi, there! I found that a lot of us who have bricked our Hermes, don't have a responsive radio bootloader, so when they try to flash a full rom, the progress bar hangs to 13%, or 81%. This is because at that time the flasher is trying to enter the radio bootloader, but because it's corrupted, it hangs. Till today there is no known solution to this one. I'm far away from England where I bought my Hermes, so I'm not thinking to send it back for repair. I'm a programmer, so my knowledge may be usefull here. The first thing I must know is if i can use the "lnb" command without being SuperCID. I mean if there is something like a Hard-SPL with an "lnb" command - (or renamed for security reasons). Maybe there is hope!
How can I try that?
windshearx said:
The first thing I must know is if i can use the "lnb" command without being SuperCID. I mean if there is something like a Hard-SPL with an "lnb" command - (or renamed for security reasons). Maybe there is hope!
Click to expand...
Click to collapse
You can use 'lnb' in HardSPL without having a real SuperCID; however you will not be able to flash a radio with 'lnb' command. The radio chipset has its own bootloader, the and the SPL just acts as a pass-through sending the data directly to radio chipset through the s2410 UART.
I had one device with non-responsive htc_boot and tried all kinds of SPL patches to flash htc_boot again on radio, without success. The only known method to fix this is to take the BGA chip out with hot air and reflash it with special hardware, as it is not common to have this equipment at home, your only option is to send it somewhere to do it for you.
However, I don't want to discourage you to research on it, maybe you find something i didn't
I have a similar problem
I also have a NO GSM and corrupted CID but I can access KITL and use it with PB 5.0. and I followed this steps here but the phone doesnt boot completely. It stops just after the two boot screens on Black WM6 ending on a white screen and the debug window on PB after loading all sort of things begin showing these lines over and over:
@@@@@@ HUB state changes now @@@@@@
[HDC]HubStatusChangeThreadPN TRUE
[HDC]HubStatusChangeThreadPN FALSE
Is there any hope for me? I have the cingular 8525
thanks
Gents, do you think the solution presented in http://forum.xda-developers.com/showthread.php?t=280425 could help me?
Please advise.
thanks again
chriscec said:
Just for curiosity, where did you send your device? Is it in the US?
Click to expand...
Click to collapse
I sent it to the HTC service center in Texas, US.
I just got my replacement from ATT.. Had the same problem. Its a hardware problem.. I wouldnt waste anymore of your time.
first, i'm sorry for my english
I've the same problem with a V1605 (french SFR), i've tried every solution but flash radio doesn't work.
I can flash cooked os without any problem, but it's impossible to put official
It's only a pda now, it's better than a brick
My hernes use to be the same as you 'NoGSM'.I tried to install the official rom,but it 's not work at all.I called to service center ask this problem,so they said that it must be only changed the mainboard. That 's terrible!!!
for ALL -that has NO GSM and stuck at OS boot,
please follow this link -
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
the link above help me to bring back my hermes alive (about four hours work).
otoro_315 said:
for ALL -that has NO GSM and stuck at OS boot,
please follow this link -
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
the link above help me to bring back my hermes alive (about four hours work).
Click to expand...
Click to collapse
That only works with phones with KITL...which I don't seem to have.
Sorry, how to config the phone with KITL and solve the no gsm problem.
No GSM but when sim inserted
Hi all, First sorry for my bad english.
I also have 2 bricked Tytn Hermes 200. Its not my personal ones Its my company's property, which pple were using this phones. So i'm facin with problem which many pple here having but with exception. both phones having no gsm error when sim inserted but without sim its fine. In other words , device info showing every info including IMEI when sim unavailable. And some times works with sim but after making few call and receiving phone hangs(not system) and goes off from network but anthena signal still showing few bars. I'm thinking maybe the radio hangs totally and goes off, and after soft restart NO GSM. I also tried many flashing upgrading those things nothing can really help me.
When im flashing original rom from HTC (the latest one HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108) its hanging on 12% and doing 3 or 4 times recovery , but its finishes succesfully. So what exactly happening in 12th%?. Maybe its started flashing radio and stopped on bad block ? But then why its finishes succesfully after few retry?. Ok so if any one wants to experiments on the phones except radio welcome. I'll help. And some can give me quick example of how to check bad blocks?.
Tnx.
@akarandomjames -
#1. have you try the comm button+reset button hold for 2-3 seconds
#2. OR try the comm button+OK button+reset button hold for 2-3 seconds
anyway, i'm not sure if KITL is dependend on the ROM version. because when my device was in NO GSM status, SPL is 1.04, HTC bootloader is 0108, and lost SuperCID. Because of my device is still has SPL 1.04, i was able to load WM5 full ROM upgrade using WWE HTC English QTEK_001 2.05.255.1 01/17/07 version (ROM available on this site under HERMES Upgrade link), run it twice. once you have successful load the WM5 ROM then try to do step #1 or #2 above to get KITL USB display on your screen device.
Note: i don't think KITL mode is not available once your device is in Production Mode. anyone here can verify this?
otoro_315 said:
@akarandomjames -
#1. have you try the comm button+reset button hold for 2-3 seconds
#2. OR try the comm button+OK button+reset button hold for 2-3 seconds
anyway, i'm not sure if KITL is dependend on the ROM version. because when my device was in NO GSM status, SPL is 1.04, HTC bootloader is 0108, and lost SuperCID. Because of my device is still has SPL 1.04, i was able to load WM5 full ROM upgrade using WWE HTC English QTEK_001 2.05.255.1 01/17/07 version (ROM available on this site under HERMES Upgrade link), run it twice. once you have successful load the WM5 ROM then try to do step #1 or #2 above to get KITL USB display on your screen device.
Note: i don't think KITL mode is not available once your device is in Production Mode. anyone here can verify this?
Click to expand...
Click to collapse
My device is still SuperCID and I know I don't have KITL...I have SPL 1.04 as well and HTC Bootloader is 0108. I can't install any ROMs with radios as they will hang at 11/12%. I will attempt this "overload" method where it seems some people have had luck with it...after a few recoveries it just finally installs...but I don't think that will be the case.
If I can't fix this in a few days, I will most likely use my warranty or just wait for the Kaiser.
My variation of No GSM
I feel like I have problem 1A...where I am able to boot into OS but no GSM.
I am still SuperCID, SPL 1.04, HTC Bootloader 0108. Last known radio before corruption was 1.48.00.00. ROM where this problem occured: VP3G 3.60.1.
I was not even in the middle of an upgrade...just a soft reset after my phone ALREADY lost GSM capabilities during a tether session. It was stuck with no signal in Phone Mode...I put it in Flight Mode...then tried to move it back to Phone Mode and it wouldn't do so. I soft reset...and the no GSM stuck.
I tried to reinstall radio...many errors...stuck on bootloader. At first, OS's only were not installing as well but I got past that. Now I am able to boot into OS's with limited capabilities...and they will NOT ACTIVESYNC at all. Regardless of how old or new the ROM is. I tried older OS's that I knew worked in the past for me...but they refused to activesync.
Due to that, I am not able to install latest HardSPL 2.10Oli via SSPL. That seems to be the only way to do it according to my knowledge and what I've read. Maybe mtty was capable but I'm not sure. HardSPL 1.40Oli wasn't giving me any problems though, but I just wanted to have the latest one so I can avoid IPL damage.
I can only install anything if I start the device in bootloader...and I'm only limited to the OS since my Radio Bootloader seems corrupted.
I'm not sure what caused the corruption in the first place...but I feel annoying now posting on different parts of the forum with a problem that seems to be growing in the community.

ATT 8525 with a T-Mobile SIM - Sorry!

Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental 
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel

Radio Problem Plz Help

Hi eveyone
i m using Imate Jasjam (hermes100). i am having a problem with network signals. its just network shows dummy signals. cant make or receive calls.
it all happened when i upgraded it to WM6. i used Hard SPL v9. the rom upgrade was ok. except that it stuck at 100% and gave a message to recover. but the rom upgrade become successful. after that i was having issue of this annoying radio prob. i used radio 1.54.30.10 after that i m using 1.54.07.00. but no change is noticed.
when the radio stops working, i change the 3G setting at Comm manager to auto mode than to GSM mode an it failed to register to network and showed "No service"
Imate Jasjam (Hermes 100)
IPL 1.04
SPL 2.60 Olipro
HardSPL v9
OS Schap's WM6 pro 4.31 full
This is a very well documented problem with hermes. More and more people are starting to have this problem now.
I had the same problem and I got a new phone under warranty.
Most likely it is a radio hardware problem and probably you will need to have the motherboard changed.
If phone is still under warranty, just get it repaired by HTC. If not then you are probably out of luck.
My 2 cents
Help needed!!!
that is very odd.
my hermes is working perfectly ok except the radio. it has never been bricked. i have flashed it many times. tried all versions of Hard SPL. tried many roms. tried many radio roms. everything installs to the last dip.
but still no success regarding radio signal problem.
i have noticed that when one sim stops showing network, i put other sim having other network coberage and it works. but jus for 10 to 12 hours. after that i have to change it back. and it works for 10 hours. but it really getting me on my nerve
please share if helpful to me.
PLEASE ADVISE ME if i get my Hermes fixed by changing its mother board, should i go for WM6 and newer radio or not.
thanks

No network & cannot flash Radio Rom.

Hi, first time i have ever had a problem with a Hermes device.
I have a Vodafone VPA version, and i have flashed "Schap's 4.31" WM6 PRO fine, like i have on many other devices in the past.
It is actualy a phone i was just sent back from someone on eBay because there was no network signal on any sim provider at all. I had unlocked it before i sent it but he has obviously done somthing to it.
So now, i can re-flash the rom fine, but i can not CID unlock it at all.
It gets to that point and give me the ERROR [262] message.
I am using "v3a by pof" to do the CID unlocking.
I have looked at the device infomation (as i can go on to windows just fine) and i do not have an IMEI number or a Radio version or a Protocol versioni number.
I think i basicaly need a Radio Rom upgrade/flash to fix it? But i can not seem to do it.
Is it somthing to do with bad blocks?....
I am dual booting Vista & XP from my laptop and have tried on both OS.
Any help would be amazing.
Update:
It also show "NO GSM" on boot along with the SPL info.
It also has HardSPL & flashing from memory card is freezing at the GSM stage also.
Why wont it let me flash a Radio to it? Its driving me crazy!
I am poor in english, so hope you can understand what I say.
Your hermes is likely the hardware is broken, I suggest you get it repaird.
My hermes like you just before the issue of "NO GSM", but I am so poor in english, I am
sorry!!!
Hmmm, that is a possibility.
But i have seem many people with the same issue and have been able to fix it.
I have been trying to wipe some settings using MTTY.exe
However, where is should be saying USB>
It is saying CMD>
I have looked through the wiki but still no luck.
Anyone else know how to fix this?

Categories

Resources