After I posted ROM-cooking method to create new SoftBank flat-rate data connection, another Japanese X01HT user has found more easier way today.
I would like to introduce new method with respect for his great work...
Now you DON'T need ROM cooking!
Step 1. Unzip the attached file, and run either ConnSBM.CAB or ConnSBM_noproxy.CAB for your purpose.
ConnSBM.CAB: make a connection, overwrite WirelessMgr_Service.dll and enable hidden proxy (webopen.softbank.ne.jp:8080), it is fully compatible as X01HT's standard connection.
ConnSBM_noproxy.CAB: just make a connection (no WirelessMgr_Service.dll and hidden proxy installation).
The connection will be created, however password entry is still empty at this moment.
Step 2. Run ORE2cert.cab (self-signature certificate for WIFIwake.exe).
Step 3. Copy Out.xml and WIFIwake.exe into \Windows folder.
Step 4. Just RUN WIFIwake.exe from \Windows.
The password will be created into the connection made by ConnSBM.CAB.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
Enjoy!
EDIT: Updated WIFIwake.exe as self-signed version. I've prepared Hermes and Universal version separately (the difference is internal string for each model name). For Universal, at least I could have successfully made the connection on the DarkForce WM6 for Universal.
Download ConnSBM_ORE2h.zip (for Hermes X01HT) or ConnSBM_ORE2u.zip (for Universal JASJAR) and try it again if the password is still blank.
IMPORTANT INFORMATION: It seems to depend on CID...
To make this operation correct on non-SuperCID device, it requires to edit internal device name and CID. The attached file for Hermes seems workable for X01HT(Model: HERM200/CID: VODAK801) or SuperCIDed HERM200 device only, and for Universal, also only for JASJAR (PU10/CDL__001) or SuperCIDed device.
If you cannot create PW, you need to edit CID (01C798h-01C7A7h) using Unicode or UTF-16 mode of binary editor (for non-HERM200 or PU10 device, Model [01C760h-01C76Fh] also), and sign yourself... However, if you burn them into your cooked ROM, it may works correctly without edit binary (I've successed on my JASJAR, using original WIFIwake.exe from X01HT).
You can determine your CID using info 2 command of mtty.exe.
Too bad I alreday cooked mine...
great!!
it's perfect work on my x01ht with wm6lvsw edition!!
thank you
WOW! Amazing! Beautiful!
Thank you so much! I love it!
Will you understand the password?
Because it is necessary when using it from the personal computer as a
modem.
Doesn't work with Treo 750v
It seems this CAB utilize WiFi manager or something?
When I extracted the files from ZIP and executed the CAB, copy the Out.xml and WIFIwake.exe to \Windows folder and executed WIFIwake.exe, nothing happens. The connection Internet was created but the password is still blank.
Password Not Made in My hTc Universal
Hi Itamae!
Very Very Good Job!!
But Dont Create Password in my Universal.Of course installing According to the procedure.
Please Help.
My Universal is 02 Xda Exec
ROM:2.10.04JPN
Radio:1.08
Nice, I was messing around and the wifiwake will not put the password without the out.xml file but I was able to edit the text in the out.xml (which was about 300 letter As) and add some more random letters in there and it created it. Anyone think they can decompile the exe and look for the actual password?
Succeeded New SoftBank AP!!
VeryVery Thanks Itamae!!
Exec ROM Changed SuperCID,I Succeess Created New AP.
Not only Hermes JPN cross bow has came!
But also Soft bank connection in defualt!
go! go go!
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
wifi connection problems
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
pharoah said:
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Click to expand...
Click to collapse
Is this guide for fresh devices only, or can I use it on the phone with all my current programs and files intact? I mean, do I need to hard reset the phone to get this to work, or will it work regardless of whether I hard reset or not?
WIFIwake for Athena
Hello itamae,
thank you very nice program!!
I wish ,,,,I have request to you,
Please make WAFIwake for Athena(HERM200,PU10)ATHE100,
sorry bad english,
nevermind... I got it working.. got the username to opensoftbank and lots of * for the password.. thanks..
April's here... is the new softbank AP fix working for everyone of you?
Wifi Problems
s2k7 said:
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
Click to expand...
Click to collapse
thanks dude....
i had the wifi problem when i flashed the black rom....now im using lsvw...works okay...
i dont have to change any internet settings. connects ryt away.
anyway, im just happy that itamae's work around went well since yesterday...
everybody had a connection right?....i hope so.
im just quite worried though, what if, sofbank releases another hurdle for flashed x01ht's? i hope they wont.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
It is, and I am very grateful for the instructions in the OP. Without them I would be lost.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
not working with dark force 2.0
It is bad news!
I just think to upgrade to Black v2.0.
Any reason for this?
Waiting for your work-around!
I am using MicorX WM6 which includes this batch in the rom.
It surely works well after April.
Ryuerik said:
not working with dark force 2.0
Click to expand...
Click to collapse
Related
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
FOR THOSE OF YOU DOING CLEAN INSTALLS:
i didn't realize this but when you do a clean install, you still have to install a couple of the sb extended roms before you run my cab. specifically, you need to run PP_ConnVKK_1.33.761.1.CAB and Provisioning.exe to set up the device to even be able to accept the new password/settings. run PP_ConnVKK_1.33.761.1.CAB first and then Provisioning.exe...now once you run provisioning.exe, you'll find that it automatically creates the old SoftBank connection for you under internet->manage existing connections with the OLD password. go ahead and delete this connection, reboot (optional) and then run my cab (new sb settings.cab). power down and up again and it should work.
just to be sure i did a file compare of the [HKEY_CURRENT_USER\Comm\RasBook\SoftBank] "Entry" and "DevCfg" keys/entries with the old SoftBank setting active and with the new SoftBank settings active and the file compare showed that the contents were completely different. i was worried that maybe somehow the system was just somehow reviving the old password and not actually using the new one but this does not appear to be the case.
UPDATE:
after some more experimenting, it seems that the cab just restores the sb connection with whatever username/pass that you had installed previously. if you delete the the new opensoftbank username connection and then run the cab, it restores the opensoftbank username/password. if you delete the old "open" username connection, it restores that. very strange since the file compare shows that this registry dump (taken from new rom with new settings) is significantly different than a dump taken from a rom with the old settings yet it is somehow restoring the old settings. thanks for looking into this but for now, i think we have to say that this isn't working. so it seems that password is not simply stored in the registry. it must be in some hidden file that this registry dump somehow activates. in any case, i'll keep working over the coming weeks. sorry for getting everyone's hopes up.
Wow, I think that is great news for every Softbank customer!
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Great job!!
You are the man! Great!!
thanks for checking! are you saying you're unsure if the file actually contains the NEW password and not the old one? well, it's definitely the new password as i created these files using only the new rom, a reg editor and a file compare tool so the old password never entered the picture.
you can actually run this exercise yourself and just repeat the steps i did if you want to be sure as the methodology is pretty simple. all i did was find where the encryped passwd was stored in registry and just imported it over to a different rom as is, encryption in tact. i've made no attempt to hack the actual passwd--we still have no idea what it is but as long as we can use the new settings, finding out what the passwd actually is unnecessary.
jokinawa said:
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Click to expand...
Click to collapse
i haven't tried this yet, but if it works for you using the new ap opensoftbank now, i believe you don't have to wait until april to see if it'll work. those who've already upgraded theirs to the new rom should be using that new ap already.
i must try this myself later today.
trialdei, thanks for the great work.
that is indeed a great news, I was also wondering how to find this in the registery but was not sure that the different key I found were the correct ones. I will try on my other Hermes tonight and we shall see ! But the very promissing point here is that potentially I can even use these files for my universal and the mteor... which means... if you don't like the crap of the SB roms... just buy a WM5 device everywhere U want and put these regkeys !!!
Good job Man !!!
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
okinz said:
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
Click to expand...
Click to collapse
actually, i don't think you need to enter the password on the pc side at all to use the phone as a modem. check this post:
http://forum.xda-developers.com/sho...etooth+set+TyTN+to+be+discoverable#post987712
how about us with new sb rom... i don't see any wireless modem application on my phone... do you have a cab file for the wireless modem app alone?. i can't find it from ftp...
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
harryk1372 said:
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
Click to expand...
Click to collapse
i think you're probably right but then i wonder what's the point of establishing the new password in the first place if the modem usage isn't an issue for them either way? all of the x01ht's making their way to hk and abroad aren't going to be used on the sb network anyway. the new read-only radio rom takes care of simlocking already so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
trialdei said:
so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
Click to expand...
Click to collapse
i think they don't want people without the flat rate data tariff contract to use the open ap to cap the monthly pay. there are quite a few people in japan who just had the vodafone contract and running universal or hermes bought from elsewhere.
now that i have your registry solution for the new password, i cannot resist testing it on my universal. if it works, i don't have to retire my universal after april 1. thanks again.
trialdei said:
basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files.
Click to expand...
Click to collapse
great job, trialdei. i have not tried this yet, but i will not have to give up a2dp if this works with the docomo rom!! many thanks!
i'm a newbie on this topic softbank open access.
so what is the main purpose of having this option available for the user.
is it allow the user to have the internet access over the softbank network.
and also if possible, please guide where i can find addititional softbank open access setup instruction, besides the information is already provided by trialdie's original post on this string.
please advice.
found the existing thread on softbank open access (unlock softbank x01ht thread). got the answer from there.
great!
this is great! i was having problems with the new sb rom and asukal's mui... i can't seem to get any network signal or even passthrough connections with that combination..
i'll try this one with the new htc rom from south africa, it may work for me.
great work dude!
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
qtotter said:
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
Click to expand...
Click to collapse
hi qtotter,
you need to make sure your registry settings are sticking...did you power off/on. the below new registry keys/entries should show up if you did it right:
[HKEY_CURRENT_USER\Comm\RasBook\SoftBank]
"Entry"
"DevCfg"
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\SoftBank]
"ConnectionGUID"
"SecureLevel"
"Secure"
"AlwaysOn"
"RequirePw"
"Enabled"
"EntryType"
"DestId"
if you don't see these new keys/entries then your registry changes aren't sticking.
trialdei said:
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
Click to expand...
Click to collapse
its great but it did not work in my o2 xda exec.
thanks
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
SoftBank's known 3G/HSDPA flat-rate packet data connection setting that has hacked from old X01HT ExtROM (user name: "open", password started from "oz...") will be unusable on end of March.
The user name of new setting (available at current ROM that released on end of Nov. 2006) has changed as "opensoftbank", and still no one hacked the password itself.
However, finally I found a way to create the connetcion, using some files dumped from current X01HT ROM.
To create SoftBank's connection that can be used continuously after Apr. 1 2007, you need ROM COOKING as follows, because at least the file WIFIwake.exe should be in the ROM to make the connection.
Step 1. Cook your ROM (add following 2 files in attached ZIP) and update device.
For general instruction of Hermes' ROM cooking, see the Wiki and related resouces.
addfile Out.xml
addfile WIFIwake.exe(A.xml and Initial.exe aren't needed)
Step 2. Install ConnSBM.CAB (included in ZIP)
The connection will be created, however password entry is still empty at this moment.
Step 3. The files are in ROM, so you need to set to "Menu -> Show All Files" on File Explorer to make ROM-attributed files visible (or, use similar option for 3rd party's file explorers, such as Resco or GSFinder+).
Step 4. Run WIFIwake.exe from \Windows folder.
The password will be created into the connection made by ConnSBM.CAB at Step 2.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
If the password is not created, maybe WIFIwake.exe (non-ROM attributed) exists on \Windows. After running Initial.exe, WIFIwake.exe is copied onto storage from ROM. You need to delete it before retry, if you have run Initial.exe before install ConnSBM.CAB or lost setting.
BTW, I guess this way can be applied not only Hermes, but also Universal and/or any other HTC devices those can edit OS ROM (at least, I have successed on WM6 for Universal).
Enjoy AT YOUR OWN RISK !
Great work, a lot of japanese people was pursuing this for long time! Congratulations
Awesome, I had been doing this same thing for 3-4 days no and getting nowhere.
Mad props to you.
I have the Hermes and I'll be going to work as an engineer in Japan from April. I have installed the DoCoMo ROM for the moment (simply because out of the two ROMs, it's the one to have Bootloader 1.0.4, I have no trouble reading Japanese, and I need a Japanese input that's a bit more stable than Bagoj's IME).
However I'm wondering exactly what this thread would enable me to do... I'm planning on getting a subscription with either SoftBank or DoCoMo (whichever provides SIM cards/accepts to register a foreign phone).
If I get a SoftBank subscription, would this enable me to somehow cheat the subscription on getting more Internet for free? Or if that's wrong, what exactly would it enable me to get?
I haven't looked into the phone subscription system at the moment, but soon will. Whatever this thread exactly means could be a huge help in any choice I would have to make.
Many thanks for your help in advance,
Cheers,
Yannick
Hmm, I get the connection added but when I try to run the initial.exe from Windows is doesnt do anything. Using 3DES Custom.
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
mousey_ said:
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
Click to expand...
Click to collapse
I finally got the program to work. Funny thing is that I could nt cook a ROM with the initial.exe in it of it would not install. I was using the Rom Koch 0.99 release. So if I just copied the files over to a fresh install of a ROM it worked but I had to click initial.exe about 4-5 times before the "loading" graphic appeared.
I am assuming that it either installs a dll with the password encoded in it of he knows the password and didn't want it to become public. Initial.exe puts the connection password in the connection that ConnSBM.CAB creates.
Without the initial.exe running you have the connection with a blank password.
Files
Seeing as how none of these files are in the ROM itself is there any way you can post a list of file to help us re-create the process?
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Alcibiade said:
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Click to expand...
Click to collapse
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
This is wonderful news indeed! Now we only need a way to cook Japanese fonts and stable input into new ROMs and life would be perfect...
Great!
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
Every time I cooked the "addfiles" the initial.exe would not run properly and create the connection. If I cooked the other files minus the initial.exe and the cab it still wouldnt create the password. I could only get it to work by copying the files after flashing. Anybody get it to work in a cooked rom?
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Alcibiade said:
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Click to expand...
Click to collapse
@^#)(!^@$ MMS Lite doesnt work
More EASY way has been found!!!
Another Japanese SoftBank user has found more easier way to add the new SB connection.
Now you DON'T need any ROM cooking. Please move to new thread.
http://forum.xda-developers.com/showthread.php?p=1172318
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
posted here, OS also Japane,,どうだ！参ったか！
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
I am not sure to understand the "cook" the ROM... are you talking about the OS part? The Radio or the Extended rom ?
Cheers
help
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
ysi said:
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
Click to expand...
Click to collapse
after copy Out.xml & WIFImake.exe to /windows folder, click on WIFImake.exe then the passwd will be inserted there!
thanks for the mail but still i did not
may be some thing wrong with my rom
thanks
Hi probably not many will take advantage of this app, but it is definitely adding some functionality to WM which normally this system is lacking. Mods please conciser that this topic is not about networking using this program but translating the program (hacking exe file) so in my opinion it should be in this section.
What is it for? PPPoE is an application to connect to wifi network with Point-to-Point Protocol over Ethernet authentication. http://en.wikipedia.org/wiki/Pppoe
There is no other application like that for Windows Mobile, at least I could not find it The only one that exists is made by NTT DOCOMO in Japan and is in Japanese
http://flets.com/spot/pdasetup_download.html
Since I'm not a programmer and I simply cannot create application like that I decided to try to translate it to English with help from online Japanese to English translator and BeeGee_Tokyo who helped me by translating parts where online translation failed THANK YOU!
How to start:
Install PPPoE.cab file on your device, it will create folder inside program files, name of the folder is in Japanese and if you are using wwe version you will see squares, you can safely rename this folder to PPPoE or whatever you want, the same with original exe file (you can delete it if you want). Please put my modified exe inside this folder (it is in PPPoE.zip file). I'm testing this program on my Topaz with WM6.1 TESS 2.2.1 but program might be device and system specific so it might not work on your device at all. You can also change .lnk file inside \windows\start menu\programs to correspond exe file name change.
Things left to do:
- translate last missing bits if possible,
- find a way to create a cab file with embedded translated exe, till now MSCEinf and WinCECabManager are unable to help me with that anyone can help?
- test the program in real life environment PPPoE authentication over wifi (I don't have access to such network at the moment) and on what devices it works.
UPDATE - Probably final translation, corrected some minor mistakes, still I can't find a way to translate one error page and about page but program is fully functional now, have fun.
Translation
I am sure this is not perfect, but it should be good enough to understand the program.
Most of the translation is done by Google I just corrected grammar a little bit and translated Katakana words, where Google usually fails.
Thank you BeeGee I corrected most of the problem I had with online translation thanks to you so program is ready, I will apply some minor changes and upload final version soon.
It doesn't work on my i780 even if i rename it like the japanese one (wich works)
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
certificate error
shamus said:
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
Click to expand...
Click to collapse
Hi!
I need this program because my adsl "router" (of Telecom Italia) have locked configuration..
I have htc touch pro with original Rom 5.05.408.1 ITA and when I launch your translated program, Windows return a certificate error!
mmmh I have question for you..
Can you create a PDF with screenShot in English and japanese for each window, so we can use the japanese version?
thank you very much!
bye!
Any news? At least, can you post screenshot of yours so we can use the japanese one?
Stuck at PPPoE AC discovery search
Well, I tried this program and ran it successfully. I entered all the necessary info n also changed the MAC as required using mtty. But when i connect it says connecting and gets stuck at PPPoE AC discovery search. I can connect with my notebook without any problem over wifi.
Anyone has any idea about it? anyone successful?
Chinese client ???
In search of PPPoE client I saw this chinese forum. They have mentioned a lot about registry editing as well. However I cudnt download the file they hav mentioned. If any kind soul can download and post the file along with proper instructions here it will be very helpful for guys like us....
http://bbs.pdafans.com/viewthread.php?tid=429157
google translate:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://bbs.pdafans.com/viewthread.php%3Ftid%3D429157&ei=VVnVSvvjNoP06gOU3vmzAg&sa=X&oi=translate&resnum=10&ct=result&ved=0CCgQ7gEwCTge&prev=/search%3Fq%3Dpppoe%2Bin%2Bppc%26hl%3Den%26sa%3DN%26start%3D30
Another one is here:
http://bbs.pdafans.com/thread-431092-1-2.html
google translate:
http://translate.googleusercontent....le.com&usg=ALkJrhhjMBmee_s-HlEMBhEEbOJtCfSkNw
http://rapidshare.com/files/292887833/PPPoE.rar
Here's the file
Edit: and here's the file in the 2nd link you provided
http://rapidshare.com/files/292895209/PPPOE_2_.rar
Re-edit:
I installed the cab in the 2nd link, i succesfully (erm..) configured the registry and the pppoe.txt but when i try to start the connection i get a "Error from RasDial" error...
I succeded in getting your exe working, you only need to remove the signature. I used this tool http://rapidshare.com/files/300851964/1206597606_72079e82.zip
please post a working file here.... thanx in advance
This one works for me
Greattt!!!
hey that's great.. u got the working file!!!!!! I wish i cud try but unfortunately I'm out of my town so cant test ur file Will do it once i'm back....
@baiggee2, Can u pls post ur findings??
Thanks guys!!!!
yythanks very much
Hi all.
I can't get it to work with my mobile cel. The program works, it connects successfully, but i can't use any browser. The "PPPoE adapter" it's "not connected" and without any IP assigned....
any help? Does this program works for you?
TIA
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
PPPOE Connection for C905 mobile
Dear all,
I am looking for aan PPPOE application for c905 mobile phone. I am not getting internet connection as soon as connected to WiFi even in laptop. I have to connect the PPOE connection. So I need same for mobile also...
Please help me...please
ilMessia said:
This one works for me
Click to expand...
Click to collapse
it didn't work for e. it says stop services, then a window appear that say restart to make changes! then when I tap on ok, it restart and nothing happen!
it didn't install any thing. I run it in my diamond2 wm6.5.
from where I can access the pppoe settings?!?!!
baiggee2 said:
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
Click to expand...
Click to collapse
Hi I was not looking at this tread for a while, all registry changes are completly unnecessary if program is working. Of course you need to setup new connection with your own network instead of Fletspot or NTT-West. How to do it? Just click menu/new network and that is it, you can add your own network but to do it of course you need to know login and password, that's how PPPoE works, if you don't know it than this program will not help you in any way to create connection.