Hi probably not many will take advantage of this app, but it is definitely adding some functionality to WM which normally this system is lacking. Mods please conciser that this topic is not about networking using this program but translating the program (hacking exe file) so in my opinion it should be in this section.
What is it for? PPPoE is an application to connect to wifi network with Point-to-Point Protocol over Ethernet authentication. http://en.wikipedia.org/wiki/Pppoe
There is no other application like that for Windows Mobile, at least I could not find it The only one that exists is made by NTT DOCOMO in Japan and is in Japanese
http://flets.com/spot/pdasetup_download.html
Since I'm not a programmer and I simply cannot create application like that I decided to try to translate it to English with help from online Japanese to English translator and BeeGee_Tokyo who helped me by translating parts where online translation failed THANK YOU!
How to start:
Install PPPoE.cab file on your device, it will create folder inside program files, name of the folder is in Japanese and if you are using wwe version you will see squares, you can safely rename this folder to PPPoE or whatever you want, the same with original exe file (you can delete it if you want). Please put my modified exe inside this folder (it is in PPPoE.zip file). I'm testing this program on my Topaz with WM6.1 TESS 2.2.1 but program might be device and system specific so it might not work on your device at all. You can also change .lnk file inside \windows\start menu\programs to correspond exe file name change.
Things left to do:
- translate last missing bits if possible,
- find a way to create a cab file with embedded translated exe, till now MSCEinf and WinCECabManager are unable to help me with that anyone can help?
- test the program in real life environment PPPoE authentication over wifi (I don't have access to such network at the moment) and on what devices it works.
UPDATE - Probably final translation, corrected some minor mistakes, still I can't find a way to translate one error page and about page but program is fully functional now, have fun.
Translation
I am sure this is not perfect, but it should be good enough to understand the program.
Most of the translation is done by Google I just corrected grammar a little bit and translated Katakana words, where Google usually fails.
Thank you BeeGee I corrected most of the problem I had with online translation thanks to you so program is ready, I will apply some minor changes and upload final version soon.
It doesn't work on my i780 even if i rename it like the japanese one (wich works)
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
certificate error
shamus said:
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
Click to expand...
Click to collapse
Hi!
I need this program because my adsl "router" (of Telecom Italia) have locked configuration..
I have htc touch pro with original Rom 5.05.408.1 ITA and when I launch your translated program, Windows return a certificate error!
mmmh I have question for you..
Can you create a PDF with screenShot in English and japanese for each window, so we can use the japanese version?
thank you very much!
bye!
Any news? At least, can you post screenshot of yours so we can use the japanese one?
Stuck at PPPoE AC discovery search
Well, I tried this program and ran it successfully. I entered all the necessary info n also changed the MAC as required using mtty. But when i connect it says connecting and gets stuck at PPPoE AC discovery search. I can connect with my notebook without any problem over wifi.
Anyone has any idea about it? anyone successful?
Chinese client ???
In search of PPPoE client I saw this chinese forum. They have mentioned a lot about registry editing as well. However I cudnt download the file they hav mentioned. If any kind soul can download and post the file along with proper instructions here it will be very helpful for guys like us....
http://bbs.pdafans.com/viewthread.php?tid=429157
google translate:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://bbs.pdafans.com/viewthread.php%3Ftid%3D429157&ei=VVnVSvvjNoP06gOU3vmzAg&sa=X&oi=translate&resnum=10&ct=result&ved=0CCgQ7gEwCTge&prev=/search%3Fq%3Dpppoe%2Bin%2Bppc%26hl%3Den%26sa%3DN%26start%3D30
Another one is here:
http://bbs.pdafans.com/thread-431092-1-2.html
google translate:
http://translate.googleusercontent....le.com&usg=ALkJrhhjMBmee_s-HlEMBhEEbOJtCfSkNw
http://rapidshare.com/files/292887833/PPPoE.rar
Here's the file
Edit: and here's the file in the 2nd link you provided
http://rapidshare.com/files/292895209/PPPOE_2_.rar
Re-edit:
I installed the cab in the 2nd link, i succesfully (erm..) configured the registry and the pppoe.txt but when i try to start the connection i get a "Error from RasDial" error...
I succeded in getting your exe working, you only need to remove the signature. I used this tool http://rapidshare.com/files/300851964/1206597606_72079e82.zip
please post a working file here.... thanx in advance
This one works for me
Greattt!!!
hey that's great.. u got the working file!!!!!! I wish i cud try but unfortunately I'm out of my town so cant test ur file Will do it once i'm back....
@baiggee2, Can u pls post ur findings??
Thanks guys!!!!
yythanks very much
Hi all.
I can't get it to work with my mobile cel. The program works, it connects successfully, but i can't use any browser. The "PPPoE adapter" it's "not connected" and without any IP assigned....
any help? Does this program works for you?
TIA
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
PPPOE Connection for C905 mobile
Dear all,
I am looking for aan PPPOE application for c905 mobile phone. I am not getting internet connection as soon as connected to WiFi even in laptop. I have to connect the PPOE connection. So I need same for mobile also...
Please help me...please
ilMessia said:
This one works for me
Click to expand...
Click to collapse
it didn't work for e. it says stop services, then a window appear that say restart to make changes! then when I tap on ok, it restart and nothing happen!
it didn't install any thing. I run it in my diamond2 wm6.5.
from where I can access the pppoe settings?!?!!
baiggee2 said:
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
Click to expand...
Click to collapse
Hi I was not looking at this tread for a while, all registry changes are completly unnecessary if program is working. Of course you need to setup new connection with your own network instead of Fletspot or NTT-West. How to do it? Just click menu/new network and that is it, you can add your own network but to do it of course you need to know login and password, that's how PPPoE works, if you don't know it than this program will not help you in any way to create connection.
Related
I've just tried this Bluetooth stack on my Himalaya,everything's working fine except 1 thing. When I want to send any file via BT,normally I turn on the BT module and in a basic FileExplorer I click on the BeamFile... item in context menu. With default stack it will find a destination device and tapping on that will create a connection. This is the problem with Broadcomm..It can't find another devices,that I can send the file to. Anyone know why? Or is it another way to send any file via BT with Broadcomm? Thanks for your suggestion.
Where do have download the Broadcom-Bluetooth-Stack??? I'm not very lucky with the original Bluetooth-Stack on my MDAII...
Thanks
...
I've downloaded this file: XdA2JoJo.v3.2zt.zip from FTP.
Especially these 2 files need to be installed:
-Broadcom1.0.0Build3500.cab and
-StackSwitcher02.cab
That's inside of this archive. You need to switch the active stack after installation in order to use it(MS/Broadcom).
Yes and I had a 2nd problem with this stack...No SSA service was available(for connect via BT modem). Therefore I am still on the default stack(which is very poor,but all is working,that I need).
Thanks, but sorry, i can't find "FTP", the links are'nt working...
I test ftp://ftp.xda-developers.com/ but i cannot access them, permission denied...
...
Try to use any FTP client such as TotalCommander,Mozilla etc. Server is http://ftp.xda-developers.com name and password is:xda.
Sorry, sorry, searching a lot of time i had find the files on ftp, but i miss a little instruction manual for the installation, can you give me any help for this? Thanks!!
...
Okay. I will post these files here,but later,coz I am on-the-go at this moment. I have it in my notebook at home...
Thank you very match!
...
Here is it:
Where??
Scuse, before logging in, i haven't found the files...
Instructions?? Nothing?? Try and error?
Thanks!!
can this patch work at MDAII?
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
FOR THOSE OF YOU DOING CLEAN INSTALLS:
i didn't realize this but when you do a clean install, you still have to install a couple of the sb extended roms before you run my cab. specifically, you need to run PP_ConnVKK_1.33.761.1.CAB and Provisioning.exe to set up the device to even be able to accept the new password/settings. run PP_ConnVKK_1.33.761.1.CAB first and then Provisioning.exe...now once you run provisioning.exe, you'll find that it automatically creates the old SoftBank connection for you under internet->manage existing connections with the OLD password. go ahead and delete this connection, reboot (optional) and then run my cab (new sb settings.cab). power down and up again and it should work.
just to be sure i did a file compare of the [HKEY_CURRENT_USER\Comm\RasBook\SoftBank] "Entry" and "DevCfg" keys/entries with the old SoftBank setting active and with the new SoftBank settings active and the file compare showed that the contents were completely different. i was worried that maybe somehow the system was just somehow reviving the old password and not actually using the new one but this does not appear to be the case.
UPDATE:
after some more experimenting, it seems that the cab just restores the sb connection with whatever username/pass that you had installed previously. if you delete the the new opensoftbank username connection and then run the cab, it restores the opensoftbank username/password. if you delete the old "open" username connection, it restores that. very strange since the file compare shows that this registry dump (taken from new rom with new settings) is significantly different than a dump taken from a rom with the old settings yet it is somehow restoring the old settings. thanks for looking into this but for now, i think we have to say that this isn't working. so it seems that password is not simply stored in the registry. it must be in some hidden file that this registry dump somehow activates. in any case, i'll keep working over the coming weeks. sorry for getting everyone's hopes up.
Wow, I think that is great news for every Softbank customer!
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Great job!!
You are the man! Great!!
thanks for checking! are you saying you're unsure if the file actually contains the NEW password and not the old one? well, it's definitely the new password as i created these files using only the new rom, a reg editor and a file compare tool so the old password never entered the picture.
you can actually run this exercise yourself and just repeat the steps i did if you want to be sure as the methodology is pretty simple. all i did was find where the encryped passwd was stored in registry and just imported it over to a different rom as is, encryption in tact. i've made no attempt to hack the actual passwd--we still have no idea what it is but as long as we can use the new settings, finding out what the passwd actually is unnecessary.
jokinawa said:
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Click to expand...
Click to collapse
i haven't tried this yet, but if it works for you using the new ap opensoftbank now, i believe you don't have to wait until april to see if it'll work. those who've already upgraded theirs to the new rom should be using that new ap already.
i must try this myself later today.
trialdei, thanks for the great work.
that is indeed a great news, I was also wondering how to find this in the registery but was not sure that the different key I found were the correct ones. I will try on my other Hermes tonight and we shall see ! But the very promissing point here is that potentially I can even use these files for my universal and the mteor... which means... if you don't like the crap of the SB roms... just buy a WM5 device everywhere U want and put these regkeys !!!
Good job Man !!!
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
okinz said:
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
Click to expand...
Click to collapse
actually, i don't think you need to enter the password on the pc side at all to use the phone as a modem. check this post:
http://forum.xda-developers.com/sho...etooth+set+TyTN+to+be+discoverable#post987712
how about us with new sb rom... i don't see any wireless modem application on my phone... do you have a cab file for the wireless modem app alone?. i can't find it from ftp...
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
harryk1372 said:
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
Click to expand...
Click to collapse
i think you're probably right but then i wonder what's the point of establishing the new password in the first place if the modem usage isn't an issue for them either way? all of the x01ht's making their way to hk and abroad aren't going to be used on the sb network anyway. the new read-only radio rom takes care of simlocking already so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
trialdei said:
so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
Click to expand...
Click to collapse
i think they don't want people without the flat rate data tariff contract to use the open ap to cap the monthly pay. there are quite a few people in japan who just had the vodafone contract and running universal or hermes bought from elsewhere.
now that i have your registry solution for the new password, i cannot resist testing it on my universal. if it works, i don't have to retire my universal after april 1. thanks again.
trialdei said:
basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files.
Click to expand...
Click to collapse
great job, trialdei. i have not tried this yet, but i will not have to give up a2dp if this works with the docomo rom!! many thanks!
i'm a newbie on this topic softbank open access.
so what is the main purpose of having this option available for the user.
is it allow the user to have the internet access over the softbank network.
and also if possible, please guide where i can find addititional softbank open access setup instruction, besides the information is already provided by trialdie's original post on this string.
please advice.
found the existing thread on softbank open access (unlock softbank x01ht thread). got the answer from there.
great!
this is great! i was having problems with the new sb rom and asukal's mui... i can't seem to get any network signal or even passthrough connections with that combination..
i'll try this one with the new htc rom from south africa, it may work for me.
great work dude!
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
qtotter said:
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
Click to expand...
Click to collapse
hi qtotter,
you need to make sure your registry settings are sticking...did you power off/on. the below new registry keys/entries should show up if you did it right:
[HKEY_CURRENT_USER\Comm\RasBook\SoftBank]
"Entry"
"DevCfg"
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\SoftBank]
"ConnectionGUID"
"SecureLevel"
"Secure"
"AlwaysOn"
"RequirePw"
"Enabled"
"EntryType"
"DestId"
if you don't see these new keys/entries then your registry changes aren't sticking.
trialdei said:
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
Click to expand...
Click to collapse
its great but it did not work in my o2 xda exec.
thanks
After I posted ROM-cooking method to create new SoftBank flat-rate data connection, another Japanese X01HT user has found more easier way today.
I would like to introduce new method with respect for his great work...
Now you DON'T need ROM cooking!
Step 1. Unzip the attached file, and run either ConnSBM.CAB or ConnSBM_noproxy.CAB for your purpose.
ConnSBM.CAB: make a connection, overwrite WirelessMgr_Service.dll and enable hidden proxy (webopen.softbank.ne.jp:8080), it is fully compatible as X01HT's standard connection.
ConnSBM_noproxy.CAB: just make a connection (no WirelessMgr_Service.dll and hidden proxy installation).
The connection will be created, however password entry is still empty at this moment.
Step 2. Run ORE2cert.cab (self-signature certificate for WIFIwake.exe).
Step 3. Copy Out.xml and WIFIwake.exe into \Windows folder.
Step 4. Just RUN WIFIwake.exe from \Windows.
The password will be created into the connection made by ConnSBM.CAB.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
Enjoy!
EDIT: Updated WIFIwake.exe as self-signed version. I've prepared Hermes and Universal version separately (the difference is internal string for each model name). For Universal, at least I could have successfully made the connection on the DarkForce WM6 for Universal.
Download ConnSBM_ORE2h.zip (for Hermes X01HT) or ConnSBM_ORE2u.zip (for Universal JASJAR) and try it again if the password is still blank.
IMPORTANT INFORMATION: It seems to depend on CID...
To make this operation correct on non-SuperCID device, it requires to edit internal device name and CID. The attached file for Hermes seems workable for X01HT(Model: HERM200/CID: VODAK801) or SuperCIDed HERM200 device only, and for Universal, also only for JASJAR (PU10/CDL__001) or SuperCIDed device.
If you cannot create PW, you need to edit CID (01C798h-01C7A7h) using Unicode or UTF-16 mode of binary editor (for non-HERM200 or PU10 device, Model [01C760h-01C76Fh] also), and sign yourself... However, if you burn them into your cooked ROM, it may works correctly without edit binary (I've successed on my JASJAR, using original WIFIwake.exe from X01HT).
You can determine your CID using info 2 command of mtty.exe.
Too bad I alreday cooked mine...
great!!
it's perfect work on my x01ht with wm6lvsw edition!!
thank you
WOW! Amazing! Beautiful!
Thank you so much! I love it!
Will you understand the password?
Because it is necessary when using it from the personal computer as a
modem.
Doesn't work with Treo 750v
It seems this CAB utilize WiFi manager or something?
When I extracted the files from ZIP and executed the CAB, copy the Out.xml and WIFIwake.exe to \Windows folder and executed WIFIwake.exe, nothing happens. The connection Internet was created but the password is still blank.
Password Not Made in My hTc Universal
Hi Itamae!
Very Very Good Job!!
But Dont Create Password in my Universal.Of course installing According to the procedure.
Please Help.
My Universal is 02 Xda Exec
ROM:2.10.04JPN
Radio:1.08
Nice, I was messing around and the wifiwake will not put the password without the out.xml file but I was able to edit the text in the out.xml (which was about 300 letter As) and add some more random letters in there and it created it. Anyone think they can decompile the exe and look for the actual password?
Succeeded New SoftBank AP!!
VeryVery Thanks Itamae!!
Exec ROM Changed SuperCID,I Succeess Created New AP.
Not only Hermes JPN cross bow has came!
But also Soft bank connection in defualt!
go! go go!
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
wifi connection problems
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
pharoah said:
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Click to expand...
Click to collapse
Is this guide for fresh devices only, or can I use it on the phone with all my current programs and files intact? I mean, do I need to hard reset the phone to get this to work, or will it work regardless of whether I hard reset or not?
WIFIwake for Athena
Hello itamae,
thank you very nice program!!
I wish ,,,,I have request to you,
Please make WAFIwake for Athena(HERM200,PU10)ATHE100,
sorry bad english,
nevermind... I got it working.. got the username to opensoftbank and lots of * for the password.. thanks..
April's here... is the new softbank AP fix working for everyone of you?
Wifi Problems
s2k7 said:
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
Click to expand...
Click to collapse
thanks dude....
i had the wifi problem when i flashed the black rom....now im using lsvw...works okay...
i dont have to change any internet settings. connects ryt away.
anyway, im just happy that itamae's work around went well since yesterday...
everybody had a connection right?....i hope so.
im just quite worried though, what if, sofbank releases another hurdle for flashed x01ht's? i hope they wont.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
It is, and I am very grateful for the instructions in the OP. Without them I would be lost.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
not working with dark force 2.0
It is bad news!
I just think to upgrade to Black v2.0.
Any reason for this?
Waiting for your work-around!
I am using MicorX WM6 which includes this batch in the rom.
It surely works well after April.
Ryuerik said:
not working with dark force 2.0
Click to expand...
Click to collapse
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Thanks man, I'll give this a go next time I flash
Thanks for the link man ...hope they will include my country in next version...
Regards,
Primoz
Could anyone who tries it for Orange UK confirm if it works.
I jut ran it quickly but only had time for a quick look. Initially seemed OK for internet but PIE would not connect (said connection error) - ran out of time and so reran the cab I use for settings (rabdos original cab I think) and then the connection worked.
Might look at it again later.
GTG.
C.
sergiopi said:
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Click to expand...
Click to collapse
Thanks man, very usefull link.
This is a "must have" for all of me that test every new ROM
Edit: Tried with Orange Spain, but dosn't work as expected. Adds Orange GPRS, WAP and MMS entries in Conecctions, but left blank access point name and Username and pass, so the connectcion fails.
Anyone have the same issue?
Thanks.
Edit2: This is the CAB modified with correct settings for Orange Spain.
Orange UK Worked Here
I Recieved An MMS Message And Synced My Hermes With An Exchange Server Over GPRS/3G. So Don't Know What Went On With Your Connection.
Cheers
Great H3GSweden worked also, thanks.
Great tool but....
when i install the configuration for germany and i also want this for austria, the german will be overwritten when i install the austrian configuration.
when i travel beetween three countrys this is not good because i take not every time my notebook with me.
Now is time for developers to convert in a PPC application all configuration files!
You have all the info's
cool thanks a lot dude
@heimerdinger.
Don't Quote Me On This One But, If You Dont Connect Your Hermes To Your PC And Then Run This Installer For The Language You Want. The Cab File That You Tried To Install Gets Saved To A Temp Folder To Be Installed The Next Time You Connect Your Device.
So Install The German And Austrian Languages Without Connecting Your Hermes, Then Search For The Cab Files. Copy Them Onto Your Device Then You Just Run Them When You Swap Between Countries.
Someone Please Correct Me If Im Wrong
Cheers
The Cab Files From The UK Installer Have Been Extracted You Can Download Them From This Thread
http://forum.xda-developers.com/showthread.php?t=301279
Cheers
cabs file not on hdd
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
heimerdinger said:
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
Click to expand...
Click to collapse
You execute the installation sofware without phone connected, and get a message that says "next time you connect your phone, the soft installs". Before click in OK, search in Temp folder for the CAB. You will find it.
If you click OK, the installation software deletes the CAB.
Regards.
HI!
I've got a problem with updating weather conditions on HTC homeplug.
I live in Novo mesto in Slovenia, so i added <city name="Novo mesto, SI" locationcode="EUR|SI|SI000|NOVO MESTO"/> at HH_0409_WeatherCities.xml.
when i want to update it says: "Unable to retrive data for selected city. Select here to retry." But when i go on www.accuweather.com and i search for novo mesto it shows weather conditions.
So...why the weather data is shown on accuweather.com but on my device its not working? I've got working internet connection on my M600.
zgi said:
HI!
I've got a problem with updating weather conditions on HTC homeplug.
I live in Novo mesto in Slovenia, so i added <city name="Novo mesto, SI" locationcode="EUR|SI|SI000|NOVO MESTO"/> at HH_0409_WeatherCities.xml.
when i want to update it says: "Unable to retrive data for selected city. Select here to retry." But when i go on www.accuweather.com and i search for novo mesto it shows weather conditions.
So...why the weather data is shown on accuweather.com but on my device its not working? I've got working internet connection on my M600.
Click to expand...
Click to collapse
Same pb, a lot of questions and no answeres
The main problem is that the HTC home plugin gets data from htc.accuweather.com and not www.accuweather.com.
I'm from Évora, Portugal and I also have that problem. I use the forecast extension with firefox and it's ok, when I added my city to the xml file and got that problem I searched the forum and found that was the problem.
Waiting for a fix ou a patch.. :\
If you check the last version of accuweather included in HTC home change the string "locationcode" for "location=" you must put the same string.Edit the original included and write exactly the string it works perfect even for me living in a small city.
theasters said:
If you check the last version of accuweather included in HTC home change the string "locationcode" for "location=" you must put the same string.Edit the original included and write exactly the string it works perfect even for me living in a small city.
Click to expand...
Click to collapse
How can I update the xml? When I edit it on a pc I can't write it back to the device? At least not when I try to copy the edited file through vista MDC.
Cheers, CT
Si zrihtal zdaj to?Jaz pa mam en drug problem,da sploh ne najdem mape windows prek windows mobile device centra.Mam Visto.Najdem pa jo v aparatovem raziskovalcu.Tam pa mi ne pusti urejanja mape.
english please !
theasters said:
If you check the last version of accuweather included in HTC home change the string "locationcode" for "location=" you must put the same string.Edit the original included and write exactly the string it works perfect even for me living in a small city.
Click to expand...
Click to collapse
How did you do that? It is write-protected file that can't be deleted or modified. There must be a way to modify even system files, so can anyone show us the way?
Total Commander works for me, it has a nice notepad app. Just edit the file.
kopus said:
Total Commander works for me, it has a nice notepad app. Just edit the file.
Click to expand...
Click to collapse
Total Commander doesn't work at all. First, it can't change the attribute from Read Only to non-Read Only. Secondly, the notepad can only support files up to 64K and so it cannot even open the file, as it's much larger.
Have you actually done this? Can you give a step by step? Perhaps it depends on the ROM.
EDIT: The only app that can do this is Resco Explorer.
Limited cities supported by htc.accuweather.com
floepie said:
Total Commander doesn't work at all. First, it can't change the attribute from Read Only to non-Read Only. Secondly, the notepad can only support files up to 64K and so it cannot even open the file, as it's much larger.
Have you actually done this? Can you give a step by step? Perhaps it depends on the ROM.
EDIT: The only app that can do this is Resco Explorer.
Click to expand...
Click to collapse
I have done something similar with Total Commander 2.5 beta, which CAN change file attributes (can't remember if previous versions could). I have removed the read only attribute, then copied the HH_0409_WeatherCities.xml file to my PC, edited it there and put it back to the Prophet. Now the new cities DO appear on the list, but still the plugin WILL NOT retrieve the weather info.
This is because the plugin queries htc.accuweather.com (and not www.accuweather.com), which does not support all cities. To test if your location is supported, browse to the website with internet explorer ON THE PROPHET (I repeat, use the browser on the prophet, not a PC) and test if your city is included. I suspect that only the cities in the original xml files are supported.
Also, check this thread: http://forum.xda-developers.com/showthread.php?t=319187&highlight=Pocket+Hosts
If you try it, I would recommend using the manual method since I don't know if the CAB will also work on the prophet.
Personally, I have not tried it yet. If you do, please report.