HTC European Operators configurator Software - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html

Thanks man, I'll give this a go next time I flash

Thanks for the link man ...hope they will include my country in next version...
Regards,
Primoz

Could anyone who tries it for Orange UK confirm if it works.
I jut ran it quickly but only had time for a quick look. Initially seemed OK for internet but PIE would not connect (said connection error) - ran out of time and so reran the cab I use for settings (rabdos original cab I think) and then the connection worked.
Might look at it again later.
GTG.
C.

sergiopi said:
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Click to expand...
Click to collapse
Thanks man, very usefull link.
This is a "must have" for all of me that test every new ROM
Edit: Tried with Orange Spain, but dosn't work as expected. Adds Orange GPRS, WAP and MMS entries in Conecctions, but left blank access point name and Username and pass, so the connectcion fails.
Anyone have the same issue?
Thanks.
Edit2: This is the CAB modified with correct settings for Orange Spain.

Orange UK Worked Here
I Recieved An MMS Message And Synced My Hermes With An Exchange Server Over GPRS/3G. So Don't Know What Went On With Your Connection.
Cheers

Great H3GSweden worked also, thanks.

Great tool but....
when i install the configuration for germany and i also want this for austria, the german will be overwritten when i install the austrian configuration.
when i travel beetween three countrys this is not good because i take not every time my notebook with me.

Now is time for developers to convert in a PPC application all configuration files!
You have all the info's

cool thanks a lot dude

@heimerdinger.
Don't Quote Me On This One But, If You Dont Connect Your Hermes To Your PC And Then Run This Installer For The Language You Want. The Cab File That You Tried To Install Gets Saved To A Temp Folder To Be Installed The Next Time You Connect Your Device.
So Install The German And Austrian Languages Without Connecting Your Hermes, Then Search For The Cab Files. Copy Them Onto Your Device Then You Just Run Them When You Swap Between Countries.
Someone Please Correct Me If Im Wrong
Cheers

The Cab Files From The UK Installer Have Been Extracted You Can Download Them From This Thread
http://forum.xda-developers.com/showthread.php?t=301279
Cheers

cabs file not on hdd
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes

heimerdinger said:
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
Click to expand...
Click to collapse
You execute the installation sofware without phone connected, and get a message that says "next time you connect your phone, the soft installs". Before click in OK, search in Temp folder for the CAB. You will find it.
If you click OK, the installation software deletes the CAB.
Regards.

Related

O2 settings on an XDA with the T-mobile 1.72 Beta ROM

I have installed the T-mobile 1.72 Beta ROM update on my O2 XDA. Everything has installed just fine and it appears to be working great. The addition of the Fax module is really welcome although a little buggy has allowed me to send a number of faxes.
The BT stack now gives me an extra option on my Widcom BT software on my desktop pc. It seems much more stable than the O2 stack.
My only problem is that all my MMS, SMS, GPRS and WAP settings are for T-Mobile UK and not O2 Ireland. I have tried to enter them manually with little success.
After reading through some of the other threads would it be possible to take the relevant cab files from an O2 1.60 (latest ROM) Extended ROM and copy them onto my PDA and then run them to install the settings? I also miss the O2 Active screen and would like to install that as well. If this is possible could and please tell me that it is!!!! Would someone be kind enough to send me the relevant Cab files?
Many thanks in advance for any help or advice.
Paul
I think its posted on this thread:
http://forum.xda-developers.com/viewtopic.php?t=8515
On page 2. There is a modified extendend rom.
Thanks for the mail
I have downloaded the extended ROM that you mentioned but it seems to just contain the T-Mobile stuff. I would like a copy of the O2 Extended ROM if possible and just install the O2 settings and Active.
Thanks
Paul
If you have an old backup, you can replace that with the new one you have now. And then runt the desired CAB files (Camera, mms, andsoon) from the new 1.72 upgrade.
Here you go mate...
Attached is a ZIP file, containing a folder.
In it, are ALL the O2 files found in an O2 Extended ROM, as per 1.60.00 ROM Upgrade, O2 WWE.
I am not sure exactly which CAB is the settings file (can anyone tell me what the GPRS settings file CAB is called in an extended ROM), so you will have to find it yourself.
It also includes the O2 Active stuff.
Hope it helps.
Download it quick, becuase I'm not sure the legalities of posting it here, and also its a big file, so using up a lot of my space, so I wanna delete it soon.
Thanks
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Re: Thanks
Pastor said:
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Click to expand...
Click to collapse
Er, you've totally lost me mate.
For the Unlocker, all I do, is copy the cab file for it over to my XDA2, then use File Manager on the XDA2 to locate the file, and click to run.
This installs it.
Then, if you go into programs, there is a new folder, next to games, for the extRom tools.
Open that, and you can hide/unhide, and lock/unlock the extended ROM.
It sometimes requires a soft reboot.
When it is unlcoked and unhidden, you can simply delete all files in it, and copy the whole O2 folder contents into it that I posted.
Then, after a hard reset, it will install all the programs in the extended rom.
Not sure what all these 'argument' things are you mention mate, sorry.
Sorted!!!
Did not see the programme group had been using the application via the file explorer and it was asking for "arguments". Thanks for the help.
Paul

Accessing internet from a PC *though* Wallaby GPRS

Hello!
Is there any method of accessing internet from a PC *though* Wallaby's GPRS? As I could undestend a Wallaby device is intended to connect to internet through PC when it is connected to it, or through the GPRS when it separated. And I would like to use GPRS as internet source for my PC - is that possible?!!
Waiting for your answers...
Thanks in advance
Yaroslav Novytskyy
Some ROMS do have a wireless modem integrated. I think with this tool you can do that.
It will act as a normal modem, you can use with your PC....
Stefan
How can I check if this my case? and how to use it? any docs, manuals, links? please...
An overview which rom includes the wmodem application could be found here:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
There have been some instructions about the wmodem from o2, but i never read them through... ;-)
Stefan
There is no WM2003SE with wmodem And I have already installed a WM2003SE from your kitchen and was so happy, that I've made it Now I will have to downgrade (p.s. is that painless? from WM2003SE to WM2003? ) Those download links from the page, you have shown abow, do not wokrk As far as I can understand - those are clean ROMs...
And one more thing: as I've mentioned, I've cooked a WM2003SE based ROM, but with some additional apps (selected while cooking) and they did not install... for example there is a plugin for MSMoney on today screen, but when clicking it, it says "error opening or locating target filename"... same with AgileMessanger and lots of others intended to be installed (but some were still installed)... Why is that? Now I think it would be better to install a "cleen" system and then to add what I do need....
Thanx for your answers.... waiting for more I do need them
pleeeeeeeeeeeeeeeease ^^^^^^^^^^^^^^^^^^^^
ynovytskyy said:
There is no WM2003SE with wmodem And I have already installed a WM2003SE from your kitchen and was so happy, that I've made it Now I will have to downgrade (p.s. is that painless? from WM2003SE to WM2003? ) Those download links from the page, you have shown abow, do not wokrk As far as I can understand - those are clean ROMs...
Click to expand...
Click to collapse
Just tried it in the moment. Downloading worked for me fine.... You can also use a normal ftp-client to access the server and download the file(s)....
ynovytskyy said:
And one more thing: as I've mentioned, I've cooked a WM2003SE based ROM, but with some additional apps (selected while cooking) and they did not install... for example there is a plugin for MSMoney on today screen, but when clicking it, it says "error opening or locating target filename"... same with AgileMessanger and lots of others intended to be installed (but some were still installed)... Why is that? Now I think it would be better to install a "cleen" system and then to add what I do need....
Click to expand...
Click to collapse
That's very courius. But i've also to say, the Wm2003SE was not so "hard tested" than the other cooking process....
There are many Users out htere sing a cooked ROM (most use Wm2003) without any Problem. So i think you don not have to use a clean ROM for your installtion....
Stefan

Make NEW SoftBank AP setting on ANY Hermes ROM W/O cooking!

After I posted ROM-cooking method to create new SoftBank flat-rate data connection, another Japanese X01HT user has found more easier way today.
I would like to introduce new method with respect for his great work...
Now you DON'T need ROM cooking!
Step 1. Unzip the attached file, and run either ConnSBM.CAB or ConnSBM_noproxy.CAB for your purpose.
ConnSBM.CAB: make a connection, overwrite WirelessMgr_Service.dll and enable hidden proxy (webopen.softbank.ne.jp:8080), it is fully compatible as X01HT's standard connection.
ConnSBM_noproxy.CAB: just make a connection (no WirelessMgr_Service.dll and hidden proxy installation).
The connection will be created, however password entry is still empty at this moment.
Step 2. Run ORE2cert.cab (self-signature certificate for WIFIwake.exe).
Step 3. Copy Out.xml and WIFIwake.exe into \Windows folder.
Step 4. Just RUN WIFIwake.exe from \Windows.
The password will be created into the connection made by ConnSBM.CAB.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
Enjoy!
EDIT: Updated WIFIwake.exe as self-signed version. I've prepared Hermes and Universal version separately (the difference is internal string for each model name). For Universal, at least I could have successfully made the connection on the DarkForce WM6 for Universal.
Download ConnSBM_ORE2h.zip (for Hermes X01HT) or ConnSBM_ORE2u.zip (for Universal JASJAR) and try it again if the password is still blank.
IMPORTANT INFORMATION: It seems to depend on CID...
To make this operation correct on non-SuperCID device, it requires to edit internal device name and CID. The attached file for Hermes seems workable for X01HT(Model: HERM200/CID: VODAK801) or SuperCIDed HERM200 device only, and for Universal, also only for JASJAR (PU10/CDL__001) or SuperCIDed device.
If you cannot create PW, you need to edit CID (01C798h-01C7A7h) using Unicode or UTF-16 mode of binary editor (for non-HERM200 or PU10 device, Model [01C760h-01C76Fh] also), and sign yourself... However, if you burn them into your cooked ROM, it may works correctly without edit binary (I've successed on my JASJAR, using original WIFIwake.exe from X01HT).
You can determine your CID using info 2 command of mtty.exe.
Too bad I alreday cooked mine...
great!!
it's perfect work on my x01ht with wm6lvsw edition!!
thank you
WOW! Amazing! Beautiful!
Thank you so much! I love it!
Will you understand the password?
Because it is necessary when using it from the personal computer as a
modem.
Doesn't work with Treo 750v
It seems this CAB utilize WiFi manager or something?
When I extracted the files from ZIP and executed the CAB, copy the Out.xml and WIFIwake.exe to \Windows folder and executed WIFIwake.exe, nothing happens. The connection Internet was created but the password is still blank.
Password Not Made in My hTc Universal
Hi Itamae!
Very Very Good Job!!
But Dont Create Password in my Universal.Of course installing According to the procedure.
Please Help.
My Universal is 02 Xda Exec
ROM:2.10.04JPN
Radio:1.08
Nice, I was messing around and the wifiwake will not put the password without the out.xml file but I was able to edit the text in the out.xml (which was about 300 letter As) and add some more random letters in there and it created it. Anyone think they can decompile the exe and look for the actual password?
Succeeded New SoftBank AP!!
VeryVery Thanks Itamae!!
Exec ROM Changed SuperCID,I Succeess Created New AP.
Not only Hermes JPN cross bow has came!
But also Soft bank connection in defualt!
go! go go!
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
wifi connection problems
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
pharoah said:
i got problems connecting to my station after doing this sb round up....it says connected, but my internet explorer wont...the internet connects with the SB connection, but not with my wifi
please help
Click to expand...
Click to collapse
Is this guide for fresh devices only, or can I use it on the phone with all my current programs and files intact? I mean, do I need to hard reset the phone to get this to work, or will it work regardless of whether I hard reset or not?
WIFIwake for Athena
Hello itamae,
thank you very nice program!!
I wish ,,,,I have request to you,
Please make WAFIwake for Athena(HERM200,PU10)ATHE100,
sorry bad english,
nevermind... I got it working.. got the username to opensoftbank and lots of * for the password.. thanks..
April's here... is the new softbank AP fix working for everyone of you?
Wifi Problems
s2k7 said:
Same here.
But you can pass this by unchecking the "Internet proxy" under Setting->Connection->Softbank
You have to do this everytime you use Wifi.
Click to expand...
Click to collapse
thanks dude....
i had the wifi problem when i flashed the black rom....now im using lsvw...works okay...
i dont have to change any internet settings. connects ryt away.
anyway, im just happy that itamae's work around went well since yesterday...
everybody had a connection right?....i hope so.
im just quite worried though, what if, sofbank releases another hurdle for flashed x01ht's? i hope they wont.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
It is, and I am very grateful for the instructions in the OP. Without them I would be lost.
auyongtc said:
April's here... is the new softbank AP fix working for everyone of you?
Click to expand...
Click to collapse
not working with dark force 2.0
It is bad news!
I just think to upgrade to Black v2.0.
Any reason for this?
Waiting for your work-around!
I am using MicorX WM6 which includes this batch in the rom.
It surely works well after April.
Ryuerik said:
not working with dark force 2.0
Click to expand...
Click to collapse

Dopod 838 Pro - Telstra

Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
diceman725 said:
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
Click to expand...
Click to collapse
Theres a file on DopodAsia's wedsite for Tesltra users, it enables newer settings. You put it in your MyDocs folder on the Dopod, and basically boot up. It uses the file, updates Network Wizard and will work properly. Its due to Tesltra's codes changing and the launch of NextG.
GL
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
jac33au said:
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
Click to expand...
Click to collapse
you can download the latest Imate ROM from their website which fixes your problem
hmmm weird. try again with attachment for cab file for telstra.
installs other stuff so beware like a proxy changes ie default and wap. all can be undone but gives u ur settings.
just saw this...
after my last post maybe helps u
http://forum.xda-developers.com/showthread.php?t=284812
it is ur device and australia specific.
Thanks folks for so many rapid responses... I was able to get the Network Wizard "fix" from Dopod's Australian service center yesterday. Unfortunately, I purchased the phone from ebay and the previous owner had already registered the serial number, so it's not letting me re-register. I've called Dopod directly to proces my registration, but they've not called me back yet.
simon_darley: will that .cab file set all the required settings on WM6? (I am considering upgrading to WM6, and a Cab file with all the Telstra settings would be nice and easy)
Does it add any of the Telstra software?
telstra aust cabs
the previous cab was the old one from the original rom released when the phone was sold and was incomplete so far as mms and other settings.
attached here is the latest from a new imate rom compulsory for telstra users and in conjunction with telstra proposed phone/data upgrade of their system should work more effectively.
i also use the telstra recommended imate radio upgrade 1.38.30.1 i think it is.
all of which runs perfectly now on wm6 including the wm6 media streaming which imate wm5 requires pvplayer as ms didnt release media streaming until wmK.
so now it works perfectly with foxtel video streaming and in 2 wks should allow simultaneous voice data connectivity which the telstra hw upgrade shouldfix for us.
i also include the my place cab which allows foxtel and videos to stream without using the download mb limits. so if u access foxtel via my place over next g it doesnt count towards the mb usage.
i have all the cabs from the upgrade and post them here for what i used only but in reality u may only need 1 or 2. i have all but installed only 5.
the ext rom in full is on xda dev if u want to download. i dont really know wot the other 3 do so installed and didnt cause any harm.
hmmm something odd nxt post should contain attachments... lost wifi...! bak soon
hmmm truble upload from pda apologies... wifi ... trying again
simon_darley said:
hmmm truble upload from pda apologies... wifi ... trying again
Default_Imate_AUS_HR_V3.30.00.cab (84.9 KB, 2 views)
Click to expand...
Click to collapse
Sorry, I didn't catch what this cab does for the JasJam.
I understand what the other two are for, but this one above I'd like to know before I install it.
Thanks.
dunno wot its 4. caused no harm 4 me.

Asukal's MUI (Multilingual User Interface) for the HTC Hermes

due to popular demand (my own really, hehe) and sanction from the man himself, here is a new thread dedicated specifically to Asukal's MUI projects for the Hermes, specifically the japanese X01HT. this is a spin-off of this thread: http://forum.xda-developers.com/showthread.php?t=284765 .
below, i've made a cliff-notes of sorts, with links to the various MUI related files within the original thread. the original files remain on that thread for the time being.
MUI relevant posts:
English MUIs:
http://forum.xda-developers.com/showpost.php?p=1077551&postcount=64
http://forum.xda-developers.com/showpost.php?p=1080864&postcount=116
http://forum.xda-developers.com/showpost.php?p=1081165&postcount=119
http://forum.xda-developers.com/showpost.php?p=1100956&postcount=195 *HTC-Z*
German MUIs:
http://forum.xda-developers.com/showpost.php?p=1078882&postcount=90
Security warning:
http://forum.xda-developers.com/showpost.php?p=1078954&postcount=97
http://forum.xda-developers.com/showpost.php?p=1079158&postcount=102
Remove Japanese 'Today' Items:
http://forum.xda-developers.com/showpost.php?p=1080487&postcount=115
English Soft Keyboard:
http://forum.xda-developers.com/showpost.php?p=1081257&postcount=122
http://forum.xda-developers.com/showpost.php?p=1082056&postcount=134
Japanese to English Bubble fix:
http://forum.xda-developers.com/showpost.php?p=1082823&postcount=141
Transcriber:
http://forum.xda-developers.com/showpost.php?p=1083600&postcount=148
http://forum.xda-developers.com/showpost.php?p=1083697&postcount=152
English Today Keys Fix:
http://forum.xda-developers.com/showpost.php?p=1108577&postcount=202
Info about uninstall/hard-reset:
http://forum.xda-developers.com/showpost.php?p=1109289&postcount=204
Terminal Services Client:
http://forum.xda-developers.com/showpost.php?p=1119779&postcount=217
Softbank MMS Program English Translation:
http://forum.xda-developers.com/showpost.php?p=1172374&postcount=257
http://forum.xda-developers.com/showpost.php?p=1172472&postcount=261
English Video Call Button:
http://forum.xda-developers.com/showpost.php?p=1089229&postcount=176
i'll try to keep this post up-to-date and either transfer the files or direct links to the files to this post, but for now, continue to refer back to that thread for nitty-gritty details. hope you all find this useful!
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
PLS DONT INSTAL or USE on Xo1H <Toshiba Device>
this is not compatible for Toshiba or any other device with WM6.
Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
Click to expand...
Click to collapse
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Click to expand...
Click to collapse
hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK )
i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,
and you can extract canbs with CAB manager (trial version is enough)
http://www.ocpsoftware.com
Good luck!
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).
one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...
tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Click to expand...
Click to collapse
i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)
Asukaly yours!
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)
also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)
Hello Asukal! I come to you again for help!
There are two things that I still have problems with while making English ROM Japanese friendly:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)
Thanks!
PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?
And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.
Really thanks for all!!
Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
Click to expand...
Click to collapse
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN
I didn't realize that could be the problem Thanks.
And thanks Asukal for LetsJapan x
sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
Click to expand...
Click to collapse
No idea about this?
sesaru said:
No idea about this?
Click to expand...
Click to collapse
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
mexec said:
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
Click to expand...
Click to collapse
sorry, i found this, and tested on my device.
not worked,
have to remake this,
PLS wait, but i am so busy this season, can not say when...
Asukal said:
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
Click to expand...
Click to collapse
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- A-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
@Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- A-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
@Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- A-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
@Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Click to expand...
Click to collapse
Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)
There is more thing to make my WM6 perfect, and also one question that maybe you can help me
-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.
-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)
Thanks a lot!!!!!!!!!!
Sesaru

Categories

Resources