Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
diceman725 said:
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
Click to expand...
Click to collapse
Theres a file on DopodAsia's wedsite for Tesltra users, it enables newer settings. You put it in your MyDocs folder on the Dopod, and basically boot up. It uses the file, updates Network Wizard and will work properly. Its due to Tesltra's codes changing and the launch of NextG.
GL
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
jac33au said:
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
Click to expand...
Click to collapse
you can download the latest Imate ROM from their website which fixes your problem
hmmm weird. try again with attachment for cab file for telstra.
installs other stuff so beware like a proxy changes ie default and wap. all can be undone but gives u ur settings.
just saw this...
after my last post maybe helps u
http://forum.xda-developers.com/showthread.php?t=284812
it is ur device and australia specific.
Thanks folks for so many rapid responses... I was able to get the Network Wizard "fix" from Dopod's Australian service center yesterday. Unfortunately, I purchased the phone from ebay and the previous owner had already registered the serial number, so it's not letting me re-register. I've called Dopod directly to proces my registration, but they've not called me back yet.
simon_darley: will that .cab file set all the required settings on WM6? (I am considering upgrading to WM6, and a Cab file with all the Telstra settings would be nice and easy)
Does it add any of the Telstra software?
telstra aust cabs
the previous cab was the old one from the original rom released when the phone was sold and was incomplete so far as mms and other settings.
attached here is the latest from a new imate rom compulsory for telstra users and in conjunction with telstra proposed phone/data upgrade of their system should work more effectively.
i also use the telstra recommended imate radio upgrade 1.38.30.1 i think it is.
all of which runs perfectly now on wm6 including the wm6 media streaming which imate wm5 requires pvplayer as ms didnt release media streaming until wmK.
so now it works perfectly with foxtel video streaming and in 2 wks should allow simultaneous voice data connectivity which the telstra hw upgrade shouldfix for us.
i also include the my place cab which allows foxtel and videos to stream without using the download mb limits. so if u access foxtel via my place over next g it doesnt count towards the mb usage.
i have all the cabs from the upgrade and post them here for what i used only but in reality u may only need 1 or 2. i have all but installed only 5.
the ext rom in full is on xda dev if u want to download. i dont really know wot the other 3 do so installed and didnt cause any harm.
hmmm something odd nxt post should contain attachments... lost wifi...! bak soon
hmmm truble upload from pda apologies... wifi ... trying again
simon_darley said:
hmmm truble upload from pda apologies... wifi ... trying again
Default_Imate_AUS_HR_V3.30.00.cab (84.9 KB, 2 views)
Click to expand...
Click to collapse
Sorry, I didn't catch what this cab does for the JasJam.
I understand what the other two are for, but this one above I'd like to know before I install it.
Thanks.
dunno wot its 4. caused no harm 4 me.
Related
I have installed the T-mobile 1.72 Beta ROM update on my O2 XDA. Everything has installed just fine and it appears to be working great. The addition of the Fax module is really welcome although a little buggy has allowed me to send a number of faxes.
The BT stack now gives me an extra option on my Widcom BT software on my desktop pc. It seems much more stable than the O2 stack.
My only problem is that all my MMS, SMS, GPRS and WAP settings are for T-Mobile UK and not O2 Ireland. I have tried to enter them manually with little success.
After reading through some of the other threads would it be possible to take the relevant cab files from an O2 1.60 (latest ROM) Extended ROM and copy them onto my PDA and then run them to install the settings? I also miss the O2 Active screen and would like to install that as well. If this is possible could and please tell me that it is!!!! Would someone be kind enough to send me the relevant Cab files?
Many thanks in advance for any help or advice.
Paul
I think its posted on this thread:
http://forum.xda-developers.com/viewtopic.php?t=8515
On page 2. There is a modified extendend rom.
Thanks for the mail
I have downloaded the extended ROM that you mentioned but it seems to just contain the T-Mobile stuff. I would like a copy of the O2 Extended ROM if possible and just install the O2 settings and Active.
Thanks
Paul
If you have an old backup, you can replace that with the new one you have now. And then runt the desired CAB files (Camera, mms, andsoon) from the new 1.72 upgrade.
Here you go mate...
Attached is a ZIP file, containing a folder.
In it, are ALL the O2 files found in an O2 Extended ROM, as per 1.60.00 ROM Upgrade, O2 WWE.
I am not sure exactly which CAB is the settings file (can anyone tell me what the GPRS settings file CAB is called in an extended ROM), so you will have to find it yourself.
It also includes the O2 Active stuff.
Hope it helps.
Download it quick, becuase I'm not sure the legalities of posting it here, and also its a big file, so using up a lot of my space, so I wanna delete it soon.
Thanks
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Re: Thanks
Pastor said:
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Click to expand...
Click to collapse
Er, you've totally lost me mate.
For the Unlocker, all I do, is copy the cab file for it over to my XDA2, then use File Manager on the XDA2 to locate the file, and click to run.
This installs it.
Then, if you go into programs, there is a new folder, next to games, for the extRom tools.
Open that, and you can hide/unhide, and lock/unlock the extended ROM.
It sometimes requires a soft reboot.
When it is unlcoked and unhidden, you can simply delete all files in it, and copy the whole O2 folder contents into it that I posted.
Then, after a hard reset, it will install all the programs in the extended rom.
Not sure what all these 'argument' things are you mention mate, sorry.
Sorted!!!
Did not see the programme group had been using the application via the file explorer and it was asking for "arguments". Thanks for the help.
Paul
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
Hi Folks,
I'm using iMate pocket PC which i bought from India. Its awesome while sync with my exchange server and get me entire mailbox of mine to the device.
I also want to check whether i can enjoy the WM2003SE on this device. I have been reading quite a few posts on WM2003SE for XDA here (i'm not sure whether this is the right forum to talk bout the iMate; however, i tried coz i seen a category for HTC).
I know for sure that the vendor has not yet published WM2003SE for iMate PPC. however, Could anybody please let me know if i can upgrade my iMate to WM2003SE (i'm crezy about it and a couple of days back i just decided to use one of the upgrade from this site and somehow cud hold myself as i cud not predict what its going to do with my device ). If its possibel, from where shall I get the upgrade?
thanks in advance.
Ketan
WM2003SE update link
Hi,
to download an update try this link:
http://forum.xda-developers.com/viewtopic.php?p=78298
But г need to be logged in!!!
Cheers.
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
ketandp said:
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
Click to expand...
Click to collapse
From Today screen, goto START/Settings/System/Device Information.
What's your ROM version/date, Radio version etc?
You can search and check out DCS posting on how to check the operator code on the .nbf files and your devices.
Alternatively, if you are not too worry about changing the operator code (since the upgrade to WM2003SE voids warranty anyway), you can run the upgrade only with HimaUpgradeUt.exe (remove the HimaGetDeviceData.exe and HimaClearJumpCode.exe).
There exists many tutorials/tips from people who have tried the upgrade, so have a good read and copy the important tips.
Some general tips from me:
(a) Backup all your important data (calendar schedule, docs, contacts etc)
(b) Be mentally prepared to spend quite awhile doing the upgrade. Smooth upgrade -> 1-2 hours, Error-prone upgrade -> 1-2 days.
Do not rush, or you will find that 99% of the time, the error happens because you are careless. Always clarify, clarify, clarify.
(c) If encounter errors, copy the sequence of events, EXACT error messages, search for similar errors reported here. If unable to find, post your errors to request for urgent help!
(d) Also, if you have the luxury of a spare phone, keep that handy in case your mobile phone connectivity is indispensable to you.
(e) If all else fails, be prepared for a downgrade back to the original ROM. Remember to download the original WM2003 ROM package as well.
good luck!
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
ketandp said:
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
Click to expand...
Click to collapse
Hi.
Did you install both files? I didn't have any problems with upgrade, except sms problem. I solveâ it finally.
Cheers
Hey,
I just ran the himalayut.exe and i'm sure there was no ms_nbf file in the directory
So, I beleive the ext ROM was not present and its not installed.
Can anyone give me a good ext ROM which i can use to with my iMate (asia)?
Thanks.
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Thanks man, I'll give this a go next time I flash
Thanks for the link man ...hope they will include my country in next version...
Regards,
Primoz
Could anyone who tries it for Orange UK confirm if it works.
I jut ran it quickly but only had time for a quick look. Initially seemed OK for internet but PIE would not connect (said connection error) - ran out of time and so reran the cab I use for settings (rabdos original cab I think) and then the connection worked.
Might look at it again later.
GTG.
C.
sergiopi said:
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Click to expand...
Click to collapse
Thanks man, very usefull link.
This is a "must have" for all of me that test every new ROM
Edit: Tried with Orange Spain, but dosn't work as expected. Adds Orange GPRS, WAP and MMS entries in Conecctions, but left blank access point name and Username and pass, so the connectcion fails.
Anyone have the same issue?
Thanks.
Edit2: This is the CAB modified with correct settings for Orange Spain.
Orange UK Worked Here
I Recieved An MMS Message And Synced My Hermes With An Exchange Server Over GPRS/3G. So Don't Know What Went On With Your Connection.
Cheers
Great H3GSweden worked also, thanks.
Great tool but....
when i install the configuration for germany and i also want this for austria, the german will be overwritten when i install the austrian configuration.
when i travel beetween three countrys this is not good because i take not every time my notebook with me.
Now is time for developers to convert in a PPC application all configuration files!
You have all the info's
cool thanks a lot dude
@heimerdinger.
Don't Quote Me On This One But, If You Dont Connect Your Hermes To Your PC And Then Run This Installer For The Language You Want. The Cab File That You Tried To Install Gets Saved To A Temp Folder To Be Installed The Next Time You Connect Your Device.
So Install The German And Austrian Languages Without Connecting Your Hermes, Then Search For The Cab Files. Copy Them Onto Your Device Then You Just Run Them When You Swap Between Countries.
Someone Please Correct Me If Im Wrong
Cheers
The Cab Files From The UK Installer Have Been Extracted You Can Download Them From This Thread
http://forum.xda-developers.com/showthread.php?t=301279
Cheers
cabs file not on hdd
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
heimerdinger said:
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
Click to expand...
Click to collapse
You execute the installation sofware without phone connected, and get a message that says "next time you connect your phone, the soft installs". Before click in OK, search in Temp folder for the CAB. You will find it.
If you click OK, the installation software deletes the CAB.
Regards.