First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
Hi Folks,
I'm using iMate pocket PC which i bought from India. Its awesome while sync with my exchange server and get me entire mailbox of mine to the device.
I also want to check whether i can enjoy the WM2003SE on this device. I have been reading quite a few posts on WM2003SE for XDA here (i'm not sure whether this is the right forum to talk bout the iMate; however, i tried coz i seen a category for HTC).
I know for sure that the vendor has not yet published WM2003SE for iMate PPC. however, Could anybody please let me know if i can upgrade my iMate to WM2003SE (i'm crezy about it and a couple of days back i just decided to use one of the upgrade from this site and somehow cud hold myself as i cud not predict what its going to do with my device ). If its possibel, from where shall I get the upgrade?
thanks in advance.
Ketan
WM2003SE update link
Hi,
to download an update try this link:
http://forum.xda-developers.com/viewtopic.php?p=78298
But г need to be logged in!!!
Cheers.
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
ketandp said:
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
Click to expand...
Click to collapse
From Today screen, goto START/Settings/System/Device Information.
What's your ROM version/date, Radio version etc?
You can search and check out DCS posting on how to check the operator code on the .nbf files and your devices.
Alternatively, if you are not too worry about changing the operator code (since the upgrade to WM2003SE voids warranty anyway), you can run the upgrade only with HimaUpgradeUt.exe (remove the HimaGetDeviceData.exe and HimaClearJumpCode.exe).
There exists many tutorials/tips from people who have tried the upgrade, so have a good read and copy the important tips.
Some general tips from me:
(a) Backup all your important data (calendar schedule, docs, contacts etc)
(b) Be mentally prepared to spend quite awhile doing the upgrade. Smooth upgrade -> 1-2 hours, Error-prone upgrade -> 1-2 days.
Do not rush, or you will find that 99% of the time, the error happens because you are careless. Always clarify, clarify, clarify.
(c) If encounter errors, copy the sequence of events, EXACT error messages, search for similar errors reported here. If unable to find, post your errors to request for urgent help!
(d) Also, if you have the luxury of a spare phone, keep that handy in case your mobile phone connectivity is indispensable to you.
(e) If all else fails, be prepared for a downgrade back to the original ROM. Remember to download the original WM2003 ROM package as well.
good luck!
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
ketandp said:
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
Click to expand...
Click to collapse
Hi.
Did you install both files? I didn't have any problems with upgrade, except sms problem. I solveâ it finally.
Cheers
Hey,
I just ran the himalayut.exe and i'm sure there was no ms_nbf file in the directory
So, I beleive the ext ROM was not present and its not installed.
Can anyone give me a good ext ROM which i can use to with my iMate (asia)?
Thanks.
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
keithhiap said:
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
Click to expand...
Click to collapse
WM2k5_1.50g_XDA2_HIMALAYA.rar :shock:
to my knowledge g could be newer than f the one in the full ram version, so this potantially could be newer, as for the files ms & radio they have to be in the same folder as NK, regarding the protocol i have no idea what do you mean so please explain further
Basically, i am trying to claify by comparing WM2003SE files.
You see, when you extract WM2003SE, you will see 3 files (MS, NK and radio) right?
And in WM2005, you only see 1 (NK).
So, by my understanding, there is no Radio, and MS(in this case, this is protocol) in WM2005
Does it means that do i need to copy Radio 1.7 FTP: xda:xda and (MS) from WM2003SE into WM2005 folder?
pardon my english.
i see the screenshot for WM2005, and it has the radio 1.7 and protocol 1337.38
this really confusing me
Also reading the upgrading procedure. is just use patch 1, patching the NK files
then use ERedit and change the operator
this leads me that this file is only for OS.
So, as for radio and protocol (here i means , MS and radio), it is copy individual from different files and place it into the folder WM2005(here i mean going to upgrade)
thanks
by the way, this file WM2k5_1.50g_XDA2_HIMALAYA.rar is only 6.08MB, which is smaller then WM2k5_XDA2_HIMALAYA_O2_FullRAM (23MB)
Huh, I downloaded it and my rar file was 23695Kb, the extracted NK.nbf was 32769Kb.
I need my device at the moment so I dare not risk the upgrade at the moment. If anyone has performed the upgrade please post a line if it was successful.
cheers
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Buzz,
what are the enhancements done on it ?
Btw thanks you for the hard work once again...
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Thnx Buzz, I just did the upgrade, no problems.. seems more stable... at least after running it for 5 minutes :wink:
Changes.log
Buzz,
Great and awesome work as usual
Just wondering if you can post a changes log or something so we can see any updates / changes you guru's have made
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
eloco said:
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
Click to expand...
Click to collapse
It's the internal storage eloco... Storage Cards ramain the same.
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount........... :?:
Perhaps are there some additional steps to do?
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount...
Click to expand...
Click to collapse
just flashed mine & memory is showing 62.00 for Storage and 56.34 for Program. I can live with 118 if this this image stops sucking my battery dry.
Can you list the differences/improvements?
Is the NAND Disk renaming to Sotrage the only change?
Can you list the differences/improvements?
Click to expand...
Click to collapse
I'm still waiting to see an improvement. Even with the slightly newer kernel I still see my battery dropping approx 1% per hour. Maybe that's OK, but with my radio, BT, and IR off I think it should do better than a 25% / day drop. If my radio was on, for 8-12 hours then 25% (maybe 40%) makes sense. I do notice that ActiveSync seems to load itself periodically (which I never saw using WM2K3SE), and I assume my serial port is being energized whenever AS loads. This could account for the power drop, but I'm still observing it. I haven't seen anything I could point to as an improvement.
I was hoping to see an improved video camera and working SMSs... :wink:
Oh well, I'm willing to wait whatever time necessary for better and better releases of BuzzMobile5.0
WoW another version from Buzz.... Buzz can u please whats the diff between the old and the new pls..
i've upgrade my xda with 1.50g, it works just great, with more stability on my device, but still with the minor bug (camera, and record button). i can see the program memory is bigger than the 1.50f, so i can open the 3mb excel file freely. now i can use the wisbar advance 2 without a bug, i think....
gadz, or anybody else with WM5, have you tried Wisbar 2.10.0.29 ? When I tried to run it, it would lock up until I renamed lrgwesex.dll. I'm also experience small graphic hic-ups, is anyone else?
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1977&start=15
Hello,
Been away from this board for a long time, thought I would share with you my final build for the XDA II O2 UK device.
Its been tested heavily over a year now and runs flawlessly from installation to operation. I have tested out various builds that have been posted on this forum but always found some issues, after compiling a list of the apps that worked I was able to put together the final build which includes the latest 1.19 radio file and various other updates such as Bluetooth and Camera files.
Bluetooth works fine for me, never had any issues with headsets however your mileage may vary.
The 1.19 radio is a boon, works better than I expected and I have noticed the voice quality is better now as well as not having the annoying connection issues with 1.18.
Installation is straight forward:
Reset your device to the boot loader screen (how to on this forum)
Insert the device in the cradle and run the following file:
HimaUpgradeUt.exe
Follow the on screen instructions, about 30 minutes later your XDA II should be upgraded to Windows Mobile 2003 Second Edition with 1.19 Radio and some cool apps like a working Intellidialer.
When the device reboots, give the device up to a minute, it should initiate the auto install process and start to flash some installation messages across your screen, allow this process to complete (can take 5 minutes or more).
Once complete the device will reboot and you will have a working O2 Windows Mobile 2003 SE image
*I have tested this build extensively with the latest software and have not found any issues. The Intellidialer works like a dream, the whole OS runs so much faster and smoother, Screen Rotation works perfectly as does the camera.*
I have included the Extended Rom tools incase some of you want to unlock or Extended ROM as I did (useful when you want to drop in apps into the OS after an upgrade or at a later date.. you simply drop them into the extended folder and then do a hard reset to redo the OS intall (warning, you will lose your data doing this so back up first).
Here is a complete list of the files:
Album_2.5.cab
Blackberry_1.2.4.19.cab
CameraB10_Hima25_WWE.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
ExtROM_Tools_1.0.cab
MIDI_Ringtone_5.6.cab
MS_Reader_2.3.cab
RegEdit_0.7.cab
SD_WPA.ARMV4.CAB
Set_Button_Lock.exe
TPEnable.exe
UltraProfiler_1.5.cab
Video_MMS_2.1.cab
AutoRun.exe
CallerIDB10_Hima25_WWE.CAB
ClearType_Tuner_1.0.cab
Config.txt
IntelliDialer_1.0.cab
MMS_Composer_1.6.0.8.cab
O2_Customisations_1.0.cab
RotateSE_1.0.07.cab
SD_WPA.ARMV4.CAB.$data.Zone.Identifier
TPDisable.exe
Truefax2_2.08.cab
Version_OU.sa.CAB
----------------------------------------------------------
ROM version: 2.06.100a
Language: WWE
Radio version: 1.19
Protocol version: 1337.38
Enjoy ;-)
*Can't seem to upload to the ftp server.. will try a couple and post the link here shortly*
Hi,
Did you ever get this uploaded?????
Flickster99
I have uploaded the image to the xda-developers ftp site, using a ftp client login as below:
ftp site: ftp.xda-developers.com
Username: xda
Password: xda
Filename: WM2003SEO2UKv2.1.zip
Enjoy!
Many thanks finalzero - just grabbed it.
Flickster
Hi guys,
I can't get the link to work (the page can not be found error), but will keep on trying. I upgraded to 2003SE from another source last week and I'm not pleased with the end result (no camera, some apps keep crashing).
Hope to bring good news soon.
Derf
Derf said:
Hi guys,
I can't get the link to work (the page can not be found error), but will keep on trying. I upgraded to 2003SE from another source last week and I'm not pleased with the end result (no camera, some apps keep crashing).
Hope to bring good news soon.
Derf
Click to expand...
Click to collapse
Hi,
just use an ftp client instead. They do a much better job than a browser...
Flickster
Hi, me again.
Ok have acquired SmartFTP and got into the site.
Have found the file, 25.1 mB.
Will let you know how it goes.
Thanks for the help
Derf
@finalzero
Thanks, is running excellent
Flashed my T-Mobile MDA II
Have tried a few other 2003se but allways went back to old 2003
This version is excellent up till now (2 day's)
From the extended rom i removed (used ER2003Edit):
Blackberry
MemMaid
Truefax
After flashing restored the Phone buttons with original ones (don't like the O2 phone skin)
Thanks for sharing
p.s. it is running way faster then the original 2003
Tuurtje
Yep,
Speed is something I noticed and application behaviour, everything runs super smooth.
I installed SPB Plus and Pocket Informant which added the finishing touches, I doubt I will be upgrading for a long time now as this image is the best I have managed to put together.
Thanks to all the contributers, Sin and a few others, I made this image over a year ago so have forgotten where I got the bits from
Enjoy,
Fz
Hi Guys,
I upgraded over the weekend and so far all is well. Thank you very much!!
I originally went down this road as I thought there was a bluetooth control program included (bluetooth manager i think its called), but have no regrets doing it anyway.
Any idea where I can get something like it from?
I use a Parrot hands free in my car and now have a Bluetooth GPS, but have real problems getting the com port freed up when not in my car.
Once again, fantastic job finalzero, and thank you for the download help Flickster.
Derf
i can't find the file
i was able to browse the files in the ftp server, but cannot find the filename you gave us... please help...
Re: i can't find the file
chunkoflife said:
i was able to browse the files in the ftp server, but cannot find the filename you gave us... please help...
Click to expand...
Click to collapse
Under uploads folder buddy It just says is upoaded on ftp
can i flash my spv m1000 v.166 with that rom?Will i have any problems?The backpack would work normal?
thank you
Upgrade
Hello !
Made my upgrade this weekend. All went well and the XDA II is functional.
Thanks for your help and dedication !
Regards from Brasil.
Mauro.
Carn't logon to ftp site using cuteftp any ideas please.
cant connect
pasword / and username in lower case !!! - when xda is posted to this siite it get cpaitalised . to log in use lowercase.
help please
hi bro, thank's for the great work, anyway i've downloaded the file from ftp and try to upgade the ROM, ROM n radio is installed successfully but the extended ROM has no effect at all (did nothing after ExtROM upgrade and after hard reset even i already do the soft reset many times) no application and camera installed because no response please help
thank you
Managed to download, put the device into bootloader mode but am getting Error 120: country ID error after a couple of minutes after running the exe.
The device has an imate rom (Australia).
Any ideas how to solve the country id error? Detailed instructions would be great.
Thanks in advance, Paul
yes i am getting the same error.Even tried the step two but it ti gives the same.I am using an orange spv m1000 with rom 1.66.00WWE
Where can I find the Ext ROM files?
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
diceman725 said:
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
Click to expand...
Click to collapse
Theres a file on DopodAsia's wedsite for Tesltra users, it enables newer settings. You put it in your MyDocs folder on the Dopod, and basically boot up. It uses the file, updates Network Wizard and will work properly. Its due to Tesltra's codes changing and the launch of NextG.
GL
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
jac33au said:
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
Click to expand...
Click to collapse
you can download the latest Imate ROM from their website which fixes your problem
hmmm weird. try again with attachment for cab file for telstra.
installs other stuff so beware like a proxy changes ie default and wap. all can be undone but gives u ur settings.
just saw this...
after my last post maybe helps u
http://forum.xda-developers.com/showthread.php?t=284812
it is ur device and australia specific.
Thanks folks for so many rapid responses... I was able to get the Network Wizard "fix" from Dopod's Australian service center yesterday. Unfortunately, I purchased the phone from ebay and the previous owner had already registered the serial number, so it's not letting me re-register. I've called Dopod directly to proces my registration, but they've not called me back yet.
simon_darley: will that .cab file set all the required settings on WM6? (I am considering upgrading to WM6, and a Cab file with all the Telstra settings would be nice and easy)
Does it add any of the Telstra software?
telstra aust cabs
the previous cab was the old one from the original rom released when the phone was sold and was incomplete so far as mms and other settings.
attached here is the latest from a new imate rom compulsory for telstra users and in conjunction with telstra proposed phone/data upgrade of their system should work more effectively.
i also use the telstra recommended imate radio upgrade 1.38.30.1 i think it is.
all of which runs perfectly now on wm6 including the wm6 media streaming which imate wm5 requires pvplayer as ms didnt release media streaming until wmK.
so now it works perfectly with foxtel video streaming and in 2 wks should allow simultaneous voice data connectivity which the telstra hw upgrade shouldfix for us.
i also include the my place cab which allows foxtel and videos to stream without using the download mb limits. so if u access foxtel via my place over next g it doesnt count towards the mb usage.
i have all the cabs from the upgrade and post them here for what i used only but in reality u may only need 1 or 2. i have all but installed only 5.
the ext rom in full is on xda dev if u want to download. i dont really know wot the other 3 do so installed and didnt cause any harm.
hmmm something odd nxt post should contain attachments... lost wifi...! bak soon
hmmm truble upload from pda apologies... wifi ... trying again
simon_darley said:
hmmm truble upload from pda apologies... wifi ... trying again
Default_Imate_AUS_HR_V3.30.00.cab (84.9 KB, 2 views)
Click to expand...
Click to collapse
Sorry, I didn't catch what this cab does for the JasJam.
I understand what the other two are for, but this one above I'd like to know before I install it.
Thanks.
dunno wot its 4. caused no harm 4 me.