Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
keithhiap said:
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
Click to expand...
Click to collapse
WM2k5_1.50g_XDA2_HIMALAYA.rar :shock:
to my knowledge g could be newer than f the one in the full ram version, so this potantially could be newer, as for the files ms & radio they have to be in the same folder as NK, regarding the protocol i have no idea what do you mean so please explain further
Basically, i am trying to claify by comparing WM2003SE files.
You see, when you extract WM2003SE, you will see 3 files (MS, NK and radio) right?
And in WM2005, you only see 1 (NK).
So, by my understanding, there is no Radio, and MS(in this case, this is protocol) in WM2005
Does it means that do i need to copy Radio 1.7 FTP: xda:xda and (MS) from WM2003SE into WM2005 folder?
pardon my english.
i see the screenshot for WM2005, and it has the radio 1.7 and protocol 1337.38
this really confusing me
Also reading the upgrading procedure. is just use patch 1, patching the NK files
then use ERedit and change the operator
this leads me that this file is only for OS.
So, as for radio and protocol (here i means , MS and radio), it is copy individual from different files and place it into the folder WM2005(here i mean going to upgrade)
thanks
by the way, this file WM2k5_1.50g_XDA2_HIMALAYA.rar is only 6.08MB, which is smaller then WM2k5_XDA2_HIMALAYA_O2_FullRAM (23MB)
Huh, I downloaded it and my rar file was 23695Kb, the extracted NK.nbf was 32769Kb.
I need my device at the moment so I dare not risk the upgrade at the moment. If anyone has performed the upgrade please post a line if it was successful.
cheers
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Buzz,
what are the enhancements done on it ?
Btw thanks you for the hard work once again...
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Thnx Buzz, I just did the upgrade, no problems.. seems more stable... at least after running it for 5 minutes :wink:
Changes.log
Buzz,
Great and awesome work as usual
Just wondering if you can post a changes log or something so we can see any updates / changes you guru's have made
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
eloco said:
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
Click to expand...
Click to collapse
It's the internal storage eloco... Storage Cards ramain the same.
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount........... :?:
Perhaps are there some additional steps to do?
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount...
Click to expand...
Click to collapse
just flashed mine & memory is showing 62.00 for Storage and 56.34 for Program. I can live with 118 if this this image stops sucking my battery dry.
Can you list the differences/improvements?
Is the NAND Disk renaming to Sotrage the only change?
Can you list the differences/improvements?
Click to expand...
Click to collapse
I'm still waiting to see an improvement. Even with the slightly newer kernel I still see my battery dropping approx 1% per hour. Maybe that's OK, but with my radio, BT, and IR off I think it should do better than a 25% / day drop. If my radio was on, for 8-12 hours then 25% (maybe 40%) makes sense. I do notice that ActiveSync seems to load itself periodically (which I never saw using WM2K3SE), and I assume my serial port is being energized whenever AS loads. This could account for the power drop, but I'm still observing it. I haven't seen anything I could point to as an improvement.
I was hoping to see an improved video camera and working SMSs... :wink:
Oh well, I'm willing to wait whatever time necessary for better and better releases of BuzzMobile5.0
WoW another version from Buzz.... Buzz can u please whats the diff between the old and the new pls..
i've upgrade my xda with 1.50g, it works just great, with more stability on my device, but still with the minor bug (camera, and record button). i can see the program memory is bigger than the 1.50f, so i can open the 3mb excel file freely. now i can use the wisbar advance 2 without a bug, i think....
gadz, or anybody else with WM5, have you tried Wisbar 2.10.0.29 ? When I tried to run it, it would lock up until I renamed lrgwesex.dll. I'm also experience small graphic hic-ups, is anyone else?
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1977&start=15
Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
Ok gang i have been lurking around for a while and im finally deciding to upgrade my phone. for my short background, i have done this on my old magician (once) and a friends t-mobile magician (once) as well, but now i want all the new gadgets and speed for my hermes. for the record i am currently a Cingular/ATT customer living in Orlando, FL where there is great 3G coverage.
here is what i have:
herm100
ipl 1.01
spl 1.06
ROM version 1.34.502.1
ROM date 09/21/06
Radio version 1.16.00.00
Protocol version 32.53.70.18.01H (i am not sure what this one means though...)
here is what i am planning to do (in the exact order of which i will run them so if my order isnt right please tell me):
HTC_Hermes_SIM_CID_Unlock_v3a
Hard-SPL-V7.rar package
HERM_Radinly_1.43.00.00_CustomRUU.rar (unless anyone thinks the 46 or 47 version would be better for ATT in my area)
Hermes_WM6_WWE_vp3G_v2.0_ATT.rar
CVSD_1.2_061226.rar
HomePlugIn_1.6.0.0.rar
vp3G_v2.0_CommManager.rar *edit* (yes i know the comm manager must be closed for this one too) *edit*
vp3G_v2.0_StreamingMedia_PATCH.rar
XM_Radio.rar (may install this later)
MobiTV .rar (may install this later)
TCPMP_v0.72RC1.exe
ac3.plugin.0.72RC1.rar
flac.plugin.0.72RC1.rar
ffmpeg.plugin.0.72RC1.rar
vorbislq.plugin.0.72RC1.rar
and that should be it i hope!!!! also, i think i remember needing a codec to play xvids through tcpmp but i cannot find anything that i have archived on my computer... so if anyone has that please let me know.
if there are any other precautionary measures that i can take PLEASE let me know. i 'somewhat' understand how the hardspl works, is that the only protection i have? should i clear up my phones memory? i doubt there is anything like a 'scandisk' or anything for the type of memory the phone uses but i just want to be 1000000% sure that this flash will be successful thats all. thanks guys up front for a great community and any help is GREATLY appreciated.
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Madcap180 said:
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Click to expand...
Click to collapse
No do the unlocker first...it loads HardSPL (1.40.oli) onto the device....it will downgrade the SPL if you run it second.
Once that is done...load HardSPLv7 onto it.
Then follow the list you said.
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
beppomarx said:
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
Click to expand...
Click to collapse
OK.....i will answer these qs but you do need to read the wiki so you DEFINATLY understand the different aspects of the hermes...
The device can be downgraded to normal (like factory settings)....see the guides in my sig for more info.
Overclocking....dont even bother...the restriction is in the ROM....later ROMs use the cpu much better.
If you want to backup contacts etc...either use PIMBackup (search this forum for it) or get an exchange account which will sync contacts/emails/tasks etc..
the IPL is still 1.01, can this be upgraded or does it not make a difference?
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
beppomarx said:
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
You need to install ALL the latest .net framework packages from Microsoft on your PC, the file is meant to run on your pc NOT your hermes.
you guys are the best and so is this site!!!
last question...
i downloaded the 'vp3G's WM6 v2.0' ROM and added the patch for 'vp3G_v2.0_StreamingMedia_PATCH.cab ' but i still cannot watch videos on youtube or any site of the likes? the page gives me an error saying 'Hello, you either have Javascript turned off or an old version of Macromedia's Flash Player. Get the latest Flash player.'
i cannot find java or macromedia that works on windows mobile... what can i use??? i am finding some stuff on javaME but nothing i can comprehend or download...
lol, when I tried to do the Unlocker first it temp-bricked my phone.. I had to reflash old rom, then run hardspl then the unlocker in that order.
Use google and search for 'Flash Player for Pocket PC'
it will give you the link to Adobe Flash Player
Hello all!
Here is the new way of rom cooking and upgrading for our Prophet:
- new original XIP
- original drivers
- original OEM from 734 ROM
- fast official update method without downgradings and first steps
- no miniOS partition + LZX compression of IMGFS (+20Mb Storage to install programs)
Stable and fast!
---
This is a clean rom with no additional programs and themes installed cooked with official Artemis WM6 SYS part. Only Office mobile updated to the latest version and some unused applications removed. Original 12 Mb poolsize - can be changed later.
No screenshots because you can't see something new - clean official rom with official theme
Update instructions:
1. Download g4.zip attached if you have G4 device or download g3.zip attached if you have G3 device. Unpack it to some place on you PC. You will have 2 dirs inside: "jumpspl" and "update"
2. Copy 3 files from "jumpspl" dir to the root of your Prophet (near Windows folder)
3. Download and unpack nk.nbf to "update" folder on your PC ( Download link: http://rapidshare.com/files/73971476/nk.rar.html )
4. Disconnect your device form PC
5. Run "SPL.lnk" in the root of your device from File manager. You will see a white screen
6. Connect your device to PC with USB cable
7. Run "ROMUpdateUtility.exe" in "update" folder and follow all steps
8. You can see process indicator only on PC! Screen of your device will be white during all update process. When finished your device will reboot.
9. Enjoy
---
If you want to change poolsize - download "korand_wwe_1_change_pool_size.zip" attached. This is patched Paradis utils. Just connect your device to PC with Activesync and run .bat with needed poolsize.
---
Bass boost and earphone volume up - download "korand_volume_up.zip" attached and see readme.txt for details. You need to import the registry files (I do it by Resco Explorer).
---
Based on firestarter prophet rom from 4pda.ru
Thanks to Prislav for his work and help
[size=+1]New version available:[/size] Korand WWE 2.1 Clean
OK, waht's inside the ROM? Picture, themes, included programs...
please give some screenshots and some description about everything inside your ROM..
thanks
matthze, varanusvincent - its a clean rom with no modifications or additional programs and themes installed.
The main advantages of this rom are: original XIP, drivers, OEM part and no Extrom (+20 Mb to storage).
All native - no bugs with drivers!
And OS part can be taken from any WM6 ROM. I take OS part from official WM6 update for Artemis (a little old build 17745 - but official and stable) - but can take any other.
Sounds very interesting
Had someone already tried this rom?
Feedbacks?
Looks like a normal WM6 ROM.
I didn't flash it jet. The new Cam software is inside.
Which WM6 Build is this based on? And what is the value of free storage?
This looks interresting.. Iam really considering to try it out..
Anyone got it flashed ?
If it does include the new camera s/w, does it have the same battery drain reported by others?
I'd be interested in a review from anyone who's installed this. I would do it myself but I have no time this week. Thanks for posting it, I don't know why but I expect it will be very good.
thankx man...
downloading...
Virus Alert
AVG reports "Dropper.Agent" in both the G3 and G4 files attatched.
Please be careful. Let me know if this is in error.
skylow said:
Looks like a normal WM6 ROM.
I didn't flash it jet. The new Cam software is inside.
Click to expand...
Click to collapse
new cam?? if it refers to the "new camera", the ansewr is negative.
however, this rom is really interesting, fast and responsive so far...
iiiox said:
new cam?? if it refers to the "new camera", the ansewr is negative.
however, this rom is really interesting, fast and responsive so far...
Click to expand...
Click to collapse
Okay you have it iiiox ? Great ! What about a mini review my friend.. ?
Screenshot?
Can you post a screenshot?
Da9L said:
Okay you have it iiiox ? Great ! What about a mini review my friend.. ?
Click to expand...
Click to collapse
Sure, my friend^^" just mention a few noteworthy as below:
@Korand: Many thanks for sharing
Speed: Fleeting
it takes less than a quarter round of the waiting cursor to open the windows folder with 14xx files / omap 264HMz (not as precisely a way to measure the speed, but certainly enough for a quick review^^")
Whether or not the speed lasts after intalling various apps remains more observation
Memory: A LOT
Storage : 57.41M
Program: 24M+ (12PP)
Both available storage memory and program memory are definitely amazing! 24M+ for program seems not so appealing at the first sight, but if the additional 6M is added as other roms with 6 PP, the total available program memory will be over 30M+
Stability: Not quite sure, but it "seems" not very optimistic^^"
Without the stability-killer "nls with chinese regions", something negative occured as below:
1. SD card missing happend once
2. The compatibility seems not good. The super lean HTC Home modified by hma4 doesn't work, celedial, a smartdialing-like app, doesn't work, either ...(try some other version later / edited: HTC.Kaizer.Home.Plugin.with.Tabsetting.schen.cab works. not sure if anyone installs incompatible apps above with luck...)
3. No "start" sound effect like the early roms from Gullum (easy to deal with though)
4. Old camera, and the quality is, unfortunately, horrible....(see the thumbnail) Note: for this single reason, i've backed to my favorate one^^"
Others:
1. No touchflo (might try FtoughFlo later)
2. No smart dialing
All opinions above are merely my very personal experience. You may find it much better than I observed and vice versa. Yet it's always touching to know that some more wonderful people are still trying to last the legend of our prophet^^
korand have you patched TrueFFS.dll to merge the extrom with storage ?
How did you manage to merge the extrom ?
iiox :
the reason your camera is like that is because you overclocked your device.
thank you!
hma4 said:
iiox :
the reason your camera is like that is because you overclocked your device.
Click to expand...
Click to collapse
Thank you very much for the info^^"
I've noticed that....yet i used to "review" all roms with conditions as similar as possible. Although it's impossible with the respect of speed or stability, the quality of camera can be an exception....maybe...^^"
BTW, I'm so curious if your super lean HTC Home can be installed properly into this rom^^? I tried and failed >_<"
iiiox said:
Thank you very much for the info^^"
I've noticed that....yet i used to "review" all roms with conditions as similar as possible. Although it's impossible with the respect of speed or stability, the quality of camera can be an exception....maybe...^^"
BTW, I'm so curious if your super lean HTC Home can be installed properly into this rom^^? I tried and failed >_<"
Click to expand...
Click to collapse
i haven't flash this rom yet (no time) but maybe the reason is that cooker of this rom haven't applied the security off package. anyway, where did you find my home plug in ?! in extrom folder of crystal V4 ?! because that cab file is only for Crystal V4.
I will look inside this rom later when i had time then i can answer your question.
hma4 said:
i haven't flash this rom yet (no time) but maybe the reason is that cooker of this rom haven't applied the security off package. anyway, where did you find my home plug in ?! in extrom folder of crystal V4 ?! because that cab file is only for Crystal V4.
I will look inside this rom later when i had time then i can answer your question.
Click to expand...
Click to collapse
Only for Crystal V4....? no wonder then -_-"
Anyway, patiently wait for your experience about this rom and ...hehehe...your V5
Can anyone confirm or deny that either of the two programs work with the brand new rom?
They didn't with 3.27. There also is a newer version of Card Export out now.
Still not working for me on the official 3.35 ROM. I'd love to get this fixed. That was an essential feature for me and it sucks not having it.
Were you referring to Card Export II 3.08 or WM5torage?
both....
I was running Card Export 3.06, so when I saw your post I was hoping 3.08 would work. Installed it and still no love. This sucks.
Edit: I submitted a bug report at Softick's website. Here's hoping for a resolution
WM5torage 1.75 works with the new rom.
Not working for me. Did you do anything special? What ROM are you running? I'm on the official Sprint 3.35 release.
Also posted at PPCGeeks,
For those interested in Card Export/WM5torage:
I don't know about everyone else, but the ability to use my phone as a flash drive for transfering files is a huge advantage for me. Activesynce/WMDC blows, and is not installed on every computer. Since the update to 3.XX ROMs, neither of these programs has worked (at least for me). I've been in touch with Softick (makers of Card Export) and I think we will have a solution soon. I've run some debug programs for them and they have developed a working version. Not sure when the final release will be, but hopefully soon. I was amazed at how responsive their team was. The day after I emailed them, the developer was in contact with me. I ran some debug programs, and the next day he had a working test version for me to try. Really awesome to see them working that quickly to develop a fix. If I hear anything about the final release I'll post again. Just thought some people might want to know.
atomclock said:
WM5torage 1.75 works with the new rom.
Click to expand...
Click to collapse
is this inaccurate information??
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
bunvilla said:
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
Click to expand...
Click to collapse
would you care to further explain exactly how you got wm5torage and card export working on dcd's 3.01 rom with the new 3.35 radio? cause i jus tried both on the same rom and it's a no go for me, using the computer operating system windows XP. i have seen them work in linux.
well first i have the security and encryption off/ second, my version of both those progs are cracked, so they have been altered and third i thinks got something to do with the fact that i use QPST program which i have both 6700 and 6800 usb drivers on my phone. i use the 6700 usb drivers for that program and possibly thats what is making those programs work. U know because i havent had a problem with them i never thought about it./ but i couldnt but a 100 percent sure, but it would be my best guess. besides from my last post u can see that i have been messing with my extrom in which i use the 2 progs to help me with
how'd u get the 6700 usb drivers on your phone? u cooked it in using dcd's kitchen? where'd u get the 6700 drivers from? the apache kitchen??
card export II seemed to work w/ linux for me (did an "ls" to see the directory listing), However, when used with Server 2003 (my regular desktop that has activesync), it mounted itself, but when I went to see the drive, it was empty.
exactly the same for me. works in linux...and is visible but empty in windows. wonder how bunvilla got it to work. he's the only one so far that's been able to get them working.
says the drivers from the 6700 is on his 6800...sounds very likely to work that way but.....wonder how he got the drivers from the 6700??
Hopefully they will figure out something soon. This program is really helpful.
i want to make sure we are on the same page ok. When i use that program I only have access to my SD card. I cant access my phone folders. So when im at work and i want to save something to my sd card i turn on Card Export II 3.08 and then the little green light comes on and in a minute it shows up when i click "my computer" icon. But u know something ever since i changed the extrom to Mounted Volume ( no i didnt just rename the Extrom to Mounted Volume) it shows up too as a little 9mb removeable drive right below my Sd card.
so in the main directory there are 2 extra removable drives that shows up, and the only thing i can think of is my SDcard is formatted fat32.
Oh and by the way i didnt extract the 6700 usb drivers from a 6700 phone, i got them from a website and i rename my usb drvs for the 6800 and use the 6700 usb drvs and then switch when im done.
someone told me that i was doing it the hard way but it works for me. hope this helps some,
there are those times when stuff jus doesnt work for everyone else. sound like a lucky dude and congrats...cause NO ONE else can get it to work. not even the company who created the program. they're supposed to be working on a fix now.
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
WM5torage 1.8 hacked version working
Hey all. Found this on one of the kaiser forums.
I can verify that I have successfully used this cab on my sprint mogul with OLD stock rom 2.17
The steps required are as follows:
1.Install hacked cab below
http://forum.xda-developers.com/attachment.php?attachmentid=69221&d=1202300677
2.Soft Reset
3.Click yes to install card export and then OK to error messages
4.Open WM5torage and disable rndis
Note:According to thread, this will not work if you have ever installed card export on your system. Not sure why
Note 2: I am using 512microsd card with stock rom. I am about to reflash (for a change) and will repost later with my custom rom based on new 3.35
-Josh
bunvilla said:
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
Click to expand...
Click to collapse
it gets my curisoty as well. one thing i have to say is it appears your level of geekiness is definitely a step above mines. u're a smart guy man. would be nice if you could maybe dump that rom of yours for us and maybe create a bunvilla's rom based off dcd's 3.01 with wm5torage and a mountable extrom working. im almost certain it would get a substantial amount of users.