I've just tried this Bluetooth stack on my Himalaya,everything's working fine except 1 thing. When I want to send any file via BT,normally I turn on the BT module and in a basic FileExplorer I click on the BeamFile... item in context menu. With default stack it will find a destination device and tapping on that will create a connection. This is the problem with Broadcomm..It can't find another devices,that I can send the file to. Anyone know why? Or is it another way to send any file via BT with Broadcomm? Thanks for your suggestion.
Where do have download the Broadcom-Bluetooth-Stack??? I'm not very lucky with the original Bluetooth-Stack on my MDAII...
Thanks
...
I've downloaded this file: XdA2JoJo.v3.2zt.zip from FTP.
Especially these 2 files need to be installed:
-Broadcom1.0.0Build3500.cab and
-StackSwitcher02.cab
That's inside of this archive. You need to switch the active stack after installation in order to use it(MS/Broadcom).
Yes and I had a 2nd problem with this stack...No SSA service was available(for connect via BT modem). Therefore I am still on the default stack(which is very poor,but all is working,that I need).
Thanks, but sorry, i can't find "FTP", the links are'nt working...
I test ftp://ftp.xda-developers.com/ but i cannot access them, permission denied...
...
Try to use any FTP client such as TotalCommander,Mozilla etc. Server is http://ftp.xda-developers.com name and password is:xda.
Sorry, sorry, searching a lot of time i had find the files on ftp, but i miss a little instruction manual for the installation, can you give me any help for this? Thanks!!
...
Okay. I will post these files here,but later,coz I am on-the-go at this moment. I have it in my notebook at home...
Thank you very match!
...
Here is it:
Where??
Scuse, before logging in, i haven't found the files...
Instructions?? Nothing?? Try and error?
Thanks!!
can this patch work at MDAII?
Related
Hi probably not many will take advantage of this app, but it is definitely adding some functionality to WM which normally this system is lacking. Mods please conciser that this topic is not about networking using this program but translating the program (hacking exe file) so in my opinion it should be in this section.
What is it for? PPPoE is an application to connect to wifi network with Point-to-Point Protocol over Ethernet authentication. http://en.wikipedia.org/wiki/Pppoe
There is no other application like that for Windows Mobile, at least I could not find it The only one that exists is made by NTT DOCOMO in Japan and is in Japanese
http://flets.com/spot/pdasetup_download.html
Since I'm not a programmer and I simply cannot create application like that I decided to try to translate it to English with help from online Japanese to English translator and BeeGee_Tokyo who helped me by translating parts where online translation failed THANK YOU!
How to start:
Install PPPoE.cab file on your device, it will create folder inside program files, name of the folder is in Japanese and if you are using wwe version you will see squares, you can safely rename this folder to PPPoE or whatever you want, the same with original exe file (you can delete it if you want). Please put my modified exe inside this folder (it is in PPPoE.zip file). I'm testing this program on my Topaz with WM6.1 TESS 2.2.1 but program might be device and system specific so it might not work on your device at all. You can also change .lnk file inside \windows\start menu\programs to correspond exe file name change.
Things left to do:
- translate last missing bits if possible,
- find a way to create a cab file with embedded translated exe, till now MSCEinf and WinCECabManager are unable to help me with that anyone can help?
- test the program in real life environment PPPoE authentication over wifi (I don't have access to such network at the moment) and on what devices it works.
UPDATE - Probably final translation, corrected some minor mistakes, still I can't find a way to translate one error page and about page but program is fully functional now, have fun.
Translation
I am sure this is not perfect, but it should be good enough to understand the program.
Most of the translation is done by Google I just corrected grammar a little bit and translated Katakana words, where Google usually fails.
Thank you BeeGee I corrected most of the problem I had with online translation thanks to you so program is ready, I will apply some minor changes and upload final version soon.
It doesn't work on my i780 even if i rename it like the japanese one (wich works)
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
certificate error
shamus said:
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
Click to expand...
Click to collapse
Hi!
I need this program because my adsl "router" (of Telecom Italia) have locked configuration..
I have htc touch pro with original Rom 5.05.408.1 ITA and when I launch your translated program, Windows return a certificate error!
mmmh I have question for you..
Can you create a PDF with screenShot in English and japanese for each window, so we can use the japanese version?
thank you very much!
bye!
Any news? At least, can you post screenshot of yours so we can use the japanese one?
Stuck at PPPoE AC discovery search
Well, I tried this program and ran it successfully. I entered all the necessary info n also changed the MAC as required using mtty. But when i connect it says connecting and gets stuck at PPPoE AC discovery search. I can connect with my notebook without any problem over wifi.
Anyone has any idea about it? anyone successful?
Chinese client ???
In search of PPPoE client I saw this chinese forum. They have mentioned a lot about registry editing as well. However I cudnt download the file they hav mentioned. If any kind soul can download and post the file along with proper instructions here it will be very helpful for guys like us....
http://bbs.pdafans.com/viewthread.php?tid=429157
google translate:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://bbs.pdafans.com/viewthread.php%3Ftid%3D429157&ei=VVnVSvvjNoP06gOU3vmzAg&sa=X&oi=translate&resnum=10&ct=result&ved=0CCgQ7gEwCTge&prev=/search%3Fq%3Dpppoe%2Bin%2Bppc%26hl%3Den%26sa%3DN%26start%3D30
Another one is here:
http://bbs.pdafans.com/thread-431092-1-2.html
google translate:
http://translate.googleusercontent....le.com&usg=ALkJrhhjMBmee_s-HlEMBhEEbOJtCfSkNw
http://rapidshare.com/files/292887833/PPPoE.rar
Here's the file
Edit: and here's the file in the 2nd link you provided
http://rapidshare.com/files/292895209/PPPOE_2_.rar
Re-edit:
I installed the cab in the 2nd link, i succesfully (erm..) configured the registry and the pppoe.txt but when i try to start the connection i get a "Error from RasDial" error...
I succeded in getting your exe working, you only need to remove the signature. I used this tool http://rapidshare.com/files/300851964/1206597606_72079e82.zip
please post a working file here.... thanx in advance
This one works for me
Greattt!!!
hey that's great.. u got the working file!!!!!! I wish i cud try but unfortunately I'm out of my town so cant test ur file Will do it once i'm back....
@baiggee2, Can u pls post ur findings??
Thanks guys!!!!
yythanks very much
Hi all.
I can't get it to work with my mobile cel. The program works, it connects successfully, but i can't use any browser. The "PPPoE adapter" it's "not connected" and without any IP assigned....
any help? Does this program works for you?
TIA
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
PPPOE Connection for C905 mobile
Dear all,
I am looking for aan PPPOE application for c905 mobile phone. I am not getting internet connection as soon as connected to WiFi even in laptop. I have to connect the PPOE connection. So I need same for mobile also...
Please help me...please
ilMessia said:
This one works for me
Click to expand...
Click to collapse
it didn't work for e. it says stop services, then a window appear that say restart to make changes! then when I tap on ok, it restart and nothing happen!
it didn't install any thing. I run it in my diamond2 wm6.5.
from where I can access the pppoe settings?!?!!
baiggee2 said:
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
Click to expand...
Click to collapse
Hi I was not looking at this tread for a while, all registry changes are completly unnecessary if program is working. Of course you need to setup new connection with your own network instead of Fletspot or NTT-West. How to do it? Just click menu/new network and that is it, you can add your own network but to do it of course you need to know login and password, that's how PPPoE works, if you don't know it than this program will not help you in any way to create connection.
Hi. My SGA has the latest Official CyanogenMod nightly. I have Windows XP, a bluetooth dongle, and bluesoleil drivers.
I am able to send images and apk files from my pc to my phone. But when I try to send an epub file, or a 7z file, my pc says:
"Access is denied. Please make sure you have the proper right to access the files or folders."
So I tried to create a compressed file and instead of using 7z, I used .zip. And it was able to send it. So I'm positive that my phone has a list of allowed filetypes to be received. Is there any way to edit it? Thanks.
PS: I tried declining a file (that successfully went through), and it gave the same access denied error on my pc. So I believe that my phone is automatically denying certain filetypes. Thanks.
yeah i think so...i cant send apk file via bluetooth i think ace wont allowed it
sent from ACE TO ACE
Same problem
What I did was changed the extension of those files to .Mp3
This way I was able to send via bluetooth and then on phone change it back to original extension
Problem?
----------------
Did I send this :O
Well that's really a hassle to do. I'll just have to wait for a real solution.
Also, every time I receive a file it asks me to confirm it. Stock Gingerbread had a check box to always receive files [from a specific device] automatically. I can't seem to see that option here. Any thoughts? Thanks again.
d4ryl3 said:
Well that's really a hassle to do. I'll just have to wait for a real solution.
Also, every time I receive a file it asks me to confirm it. Stock Gingerbread had a check box to always receive files [from a specific device] automatically. I can't seem to see that option here. Any thoughts? Thanks again.
Click to expand...
Click to collapse
Every cm7 has that problem.. No solution to the best of my knowledge
----------------
Did I send this :O
FTP server: epo.mediatek.com
Port: 21
Login: epo_alps
Password: epo_alps
There are two files:
EPO.DAT
EPO.MD5
Both files are updated on the server once per day, usualy around 7:51(GMT+2).
They should be downloaded to the folder: /data/misc .
When you try to download them from phone "EPO settings", you see message "EPO FILE INFO DOWNLOADING", than you see (50%). That 50% status appears and disappears around 3 times, and some time after that you receive error message "Download files invalid".
The reason is, that they have always wrong MD5 checksum in file EPO.MD5. So your phone download and compare/calc checksum for few times, but every time the checksum is incorrect. And that is reason, why it is not working.
I have tried to connect to the epo.mediatek.com ftp server manually from PC. Every time i download EPO.DAT file, the MD5 checksum is the same, but in EPO.MD5 file is another one (also still the same).
I have calculated correct MD5 checksum, and changed it to correct value to the file EPO.MD5. Than I have uploaded both files to my private FTP server. And than, through "Engineering Menu" (you can enter there by calling number *#*#3646633#*#* and then select "EPO" item) in the phone I have changed FTP connection/login/password to my server, and tested that. And when I have there correct MD5 checksum in file EPO.MD5, everything works as it should be.
So someone should tell Mediatek, that they have some serious problem with MD5 calculation on their FTP server.
Anunnaki said:
...
So someone should tell Mediatek, that they have some serious problem with MD5 calculation on their FTP server.
Click to expand...
Click to collapse
Problem still persists, Download of EPO-Files is not possible.
Matthias
As of today the problem still persist, however it's not caused by wrong MD5 check sum anymore. I've checked and it's correct, but I still get the same massage when trying to download the file from the Mediatek's server: "Download files invalid"
I've updated the EPO file on my phone by using my FTP server and it worked.
Yes, it worked since the 19th, thats when my A750 downloaded again.
Just to be sure, I checked again, and its working still.
Maybe you have accidentally changed the settings?
mine failed few times, switched to wifi and managed to get it to work. thanks for the engineering menu tip - very useful and interesting, especially with the agps reset, warm/full and timer options. Now looking for something similar for other phones
Today working on my Hero 9500+
manucasillas said:
Today working on my Hero 9500+
Click to expand...
Click to collapse
yes, its working again, but there is a problem with server ping not settings on the phone
EPO files not downloadable
Anunnaki said:
I have tried to connect to the epo.mediatek.com ftp server manually from PC. Every time i download EPO.DAT file, the MD5 checksum is the same, but in EPO.MD5 file is another one (also still the same).
I have calculated correct MD5 checksum, and changed it to correct value to the file EPO.MD5. Than I have uploaded both files to my private FTP server. And than, through "Engineering Menu" (you can enter there by calling number *#*#3646633#*#* and then select "EPO" item) in the phone I have changed FTP connection/login/password to my server, and tested that. And when I have there correct MD5 checksum in file EPO.MD5, everything works as it should be.
Click to expand...
Click to collapse
Hi.
I've been having this problem since my UMI X1 arrived (MTK6577). I goes till 25% or 50%, and then restarts.. repeating until failure. Worse than that:
- If I download the files from the PC, and put them on /data/misc, it doesn't recognize them
- My engineering menu, on the EPO tab, doesn't have a field to let me choose the FTP server...
Do you know if there's other way of updating the EPO files, or forcing the EPO FTP settings?
Thank you
I don't have a mediatek phone anymore - I sold it to replace it with something with sourcecode.
Can someone please scan thier /data/misc folder with ls -l to see what permissions the EPO file should have
Finally
Hi.
I finally managed to get my EPO settings working.
It was a permissions problem, that didn't allow the phone to process the EPO.DAT (either downloaded from the PC and moved to /data/misc, either downloaded directly).
So, I just gave the EPO.DAT and EPO.MD5 files (under /data/misc) full permissions, and it just worked!
And I confirm that my MTK engineering menu doesn't have the option to change the EPO server settings.
The FTP Server is not alvailable and therefore I can't download the files !
Is there any other way to get them?
consti83 said:
The FTP Server is not alvailable and therefore I can't download the files !
Is there any other way to get them?
Click to expand...
Click to collapse
I have the same problem.
Any solution?
Same issue, FTP server is not available
Can somebody who has the EPO files post them for us to download?
Thanks:good:
Yes please, if someone has the files, please upload them and share.
Here is the december EPO file:
http://www.datafilehost.com/d/298fc506
yeah same here. no ftp access. the address epo.mediatek.com resolves to different 124.219.30.x ip addresses when i ping it, but nothing opens.
2013/12/24 I was able to download the last Epo file. After that the server is unavailable. What now?
Is there any way that someone told MediaTek to the problem?
I think server is very busy, I've downloaded EPO files from this month (I can't remember if was on 2nd or 3th of January), via PC with Filezilla . Now, I'm at work, when go back my home I will upload the files (mega?) .
Anyway, to get gps working correctly, is necessary to download EPO files every days :S.
Regards!
I Trying two days with computer with FileZilla and nothing.
"Anyway, to get gps working correctly, is necessary to download EPO files every days"
Is this true??? It says it's worth a 30 days.
Really I need to often download Epo?
darko150 said:
I Trying two days with computer with FileZilla and nothing.
"Anyway, to get gps working correctly, is necessary to download EPO files every days"
Is this true??? It says it's worth a 30 days.
Really I need to often download Epo?
Click to expand...
Click to collapse
Oopss, sorry, I didn't know this, I suposed everydays system download EPO files. Here is January files, copy EPO.DAT, EPO.MD5 and LEGAL.txt on /data/misc folder:
https://mega.co.nz/#!NYlBFApL!Hrh57yPOTsbt7FZXn2RT3FhEXoE4knbBr61nd5E2gTg
regards!
MTK65xx GPS EPO
ercea said:
Oopss, sorry, I didn't know this, I suposed everydays system download EPO files. Here is January files, copy EPO.DAT, EPO.MD5 and LEGAL.txt on /data/misc folder: https://mega.co.nz/#!NYlBFApL!Hrh57yPOTsbt7FZXn2RT3FhEXoE4knbBr61nd5E2gTg
regards!
Click to expand...
Click to collapse
Thanks. Here is a mirror link: http://ge.tt/api/1/files/4kklvs81/51/blob?download . I also see mtkgps.dat file in /data/misc. Should I erase that and reboot, so as to reset gps ?
Problem
Start an app that uses GPS (such as Maps), and then use a root file explorer to look in /data/gps/ , you will see the file gldata.sto, but you will not see lto.dat. This contains long term orbit data used to speed up a GPS fix from a cold start. If you see this file, then the fix posted here is not needed.
Cause
If you enable logging and look in the log file, you will see a line like this: LBS: Error resolving address from bcmls2.glpals.com. I have no idea why it can't resolve the DNS, but this prevents the file from being downloaded. This address is stored in the /system/etc/gps_brcm_conf.xml file. You will see the following: LbsServer="BCMLS2.glpals.com"
Fix
Simply change this to the resolved IP address and it should resolve the problem. I have attached a zip that you can install from recovery so you don't need to make the modification manually.
I have tested this on P769. Please give feedback on whether this works for you, and whether this helps for other L9 models.
Thanks, testing today with endomondo running...
After test, working fine for me on P760 with cm11.
Thanks so much
Hi everyone!
im just new here.
I would like to ask for your help about an app called Http Injector. we use this in our country (Philippines)
to access internet via vpn for free.
to use this app, you have to register to sites that offers free ssh acount such as createssh.com, then create a payload (which has to be a freesite from our isp) and a remote proxy. then we you are connected, you can create a config file ( with an extention ".ehi") and share it to others.
the problem is, some .ehi files that is being shared are locked to prevent others to copy their config.
I hope you can help me sniff through these locked .ehi files guys...
thanks and more power.
bugz88 said:
Hi everyone!
im just new here.
I would like to ask for your help about an app called Http Injector. we use this in our country (Philippines)
to access internet via vpn for free.
to use this app, you have to register to sites that offers free ssh acount such as createssh.com, then create a payload (which has to be a freesite from our isp) and a remote proxy. then we you are connected, you can create a config file ( with an extention ".ehi") and share it to others.
the problem is, some .ehi files that is being shared are locked to prevent others to copy their config.
I hope you can help me sniff through these locked .ehi files guys...
thanks and more power.
Click to expand...
Click to collapse
Don't know if you still going to need this.
Install Xposed, go to Framework => Install/Update => Restart
Install Ehiopener. Open Xposed, go to modules if you already installed Ehiopener you'll see it there click it and activate than restart.
Congratz', you can sniff EHI now it wiill not help with root protected ehi.
ehi opener not compatible apps
hi Sir is there a latest version in ehi opener...i tried to install ehi opener 0.4.3 its said not compatible using the latest http injector hope there someone who can help me about this matter many thanks guyz...
Hello to all
it would be very useful if it is possible to:
When connected to WIFI, HTTP injector service stops
When connected to any mobile network and not connected to WIFI, service auto starts
also it is annoying that when rebooting phone i have to manually start the service
anyway to avoid that?
thanks