MDA Cover - 8125, K-JAM, P4300, MDA Vario Accessories

I once saw a thread for a MDA cover, it actually goes on the fone, the pictures they had showed that it was white. goes on like skin i beleive it was made of silicon. and i saw it on here once and i want to buy it now but i cant find the thread for it. does anyone know where i can find it? or know of something similar that works good? thank you

I got mine at pda-den.

Thanks =)
i found it. thanks. but quick question the one on here has a clear screen. does it work good??

screen
It is a polycarb or plexiglass flip. It's fine, just prone to scratching like all the others.

Isn't there a version without the flip?

AsGF2MX said:
Isn't there a version without the flip?
Click to expand...
Click to collapse
not that I know of.

I actually bought that MDA case and really had a tough time making it stay on (just the back part).
It appears that the back part is too small... I actually ended up breaking the little "anchor" that is supposed to clip on by the spacebar. For a while I tried to just tape it on, but ended up giving up... the case is just sitting in a drawer in my desk now...
overall, I was pretty displeased with the fit of the case...

Related

Crystal Clear Case for JASJAM/TYTN/8525 - anyone know where to get one?

HI Everyone,
Ive tried a leather case - didint like it as you have to flip open flaps to access it and makes phone calls akward.
Ive tried an alloy case - you have to open it to use it and use the keyboard
Silicon Case - bad experience using these because I used one on my old Nokia N73 and it still dented the housing when it was dropped.
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen. I know the screen wont be protected but a screen protector will do the job of preventing scratches. Also, a swivel belt clip screw mount on the back will be nice too,
I know there are some for the Wizard, but I havent seen any for the Hermes yet. This case will be ideal as you get all the access to the device and you dont hide the beauty of it behind leather and alloy like in other cases.
Any help will be appreciated
jasjamming said:
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen.
Click to expand...
Click to collapse
Don't want to be the bearer of bad news, but I just had a look on eBay and there aren't any listed there. I would have thought that if anybody was manufacturing such a case that they would be available on FleaBay.
I posted an almost identical post requiring the same thing not so long ago- no repsonses as of yet!
These are widely available for many other 'slider' phones but not yet for our one.
Ive sent two request to Boxwave. Their response is need more request.
I have been looking for a Crystal Case before I even got my 8525. I love this type of case. Sadly though it doesn't exist yet.
If you guys gohere and request an Active Case maybe we will have one soon. Note you must select Active Case because the web page loads with a check mark next to the ClearTouch Anti-Glare and that's not the same.
yep, i put in a request.
this type of case will be ideal as it will show the sleek lines of the tytn/jasjam, protect it, and allow keyboard access without unclipping anything.
what could be simpler....?
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
shigeo said:
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
Click to expand...
Click to collapse
What felt so wrong about it?

Clear Hard Skin Case

I ordered this case a while back, and I absolutely love it.
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45eeeac5fa
The one I ordered was a little cheaper, and didn't include the lcd protection, but the case is the same. Anyway, I think I paid around 8 bucks or so. I did have the body glove case, drilled a hole for the proximity sensor, but after a while, the case started to catch on the clear plastic sticker on the back of the lcd screen. It also started to catch on the side stickers beside the keyboard. This new case fits extremely well, and has yet to catch on anything. The only grip I have is that it is a little slick, but not enough to deter me. Just thought I'd share.
i got the exact same one man. love it
s0calstate0fmind said:
i got the exact same one man. love it
Click to expand...
Click to collapse
Yeah, it fits perfectly, plus it looks a lot nicer too. Every time I pull it out, everyone always asks me, "Whoa, what phone is that?" I hated having to wear that belt clip for it. Now, I can leave it in my pocket without the side bag on my belt.
Could you post some pics of the phone inside the case plz?
An To Mi said:
Could you post some pics of the phone inside the case plz?
Click to expand...
Click to collapse
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
will this def not fit an at&t tilt 2??
Thanks for posting the pics! I agree, it does look good. I'm gonna order one now
Here's a link for a "clear enough"(actual color listed as Smoke Transparent) hard case for Sprint/TMobile TP2s
My first post to these forums, I don't have a TP2....yet, but I'll pull the trigger as soon as I've finished researching a few more things. All the information seems to be here, I just need to read through it all.
http://cgi.ebay.com/Smoke-Trans-Case-for-HTC-Touch-Pro2-CDMA-Sprint-Verizon_W0QQitemZ280417518162QQcmdZViewItemQQptZPDA_Accessories?hash=item414a2fc252
bubbaclutch said:
will this def not fit an at&t tilt 2??
Click to expand...
Click to collapse
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
pimp4cheddar said:
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
Click to expand...
Click to collapse
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
dougstoner said:
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
Click to expand...
Click to collapse
I saw this one earlier...
I'm actually looking for a black one...and I'm only going to use the back (battery) cover...I hate covers on the front of my phones...
Thanks for the link!
dougstoner said:
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
Click to expand...
Click to collapse
I want a micro sd slot like that
i got the clear one and the brown rubber case...both fit great.

What do you think of this case/screen protector combo?

Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
I don't bite
Alik4041 said:
I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened.
Click to expand...
Click to collapse
It was 2000 the first time I experienced that. It was a palm m500 and a little piece of dust got on the tip of my stylus. I didn't hear it so much as I felt the friction, but my reaction was much the same. I haven't gone without a screen protector since.
As to the included screen protector, use it if it works for you, but you'll typically find better durability in popular protectors like the boxwaves you linked to or clarivues. The clarivue that I put on my Palm TX in 2005 is still on it, and still looks good.
The thing I worry about with a lot of those no name brand cases on ebay is how well do they really fit? The last thing you want is to have them falling off. I don't know if my fear is well-founded or not, but I didn't really want to gamble on it. But as far as TMo goes, I'm not sure what to tell you. Boxwave actually has a pretty cool soft case called the praetorian crystal slip, but not for the TMo version. Seidio seems like a nice quality joint, but they don't seem to make their innocase for the TMo version either.
Edit: I suppose you could check this thread out.
I had the acrylic case with screen protector and I removed it shortly after purchasing. The porblem I had is that the screen protector is superficial and although it works sometimes when I typed certain virtual keys another part of the screen protector would also bend down on my press and caused for a different near by character to be pressed. Eventually I got rid of it and just purchased a seperate screen protector.
I really am looking for quality though for a case, just want something that's not too big or will not hinder usage of the phone. I've heard a lot about the ghost armoring and all. I'm considering it, but that will not save a phone from a fall or anything like that.
Consider an all-body protector (such as zagg or bodyguardz), combined with a pouch or holster case that you remove the device from to use it.
This is my preferred method, so my TP2 is well protected when it's not in use, and I'm completely unhindered when I am using it (but still with scratch protection).
Note that the protectors need to be applied very slowly and carefully to make sure they're lined up well and properly stuck down around the edges.
Alik4041 said:
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
Click to expand...
Click to collapse
I have the same clear hard plastic case and absolutely love it. I've tried the body glove case, and had some issues with sliding the keyboard in and out. I just use the screen protector that came with the phone, and the clear hard plastic case. No problems at all, though I still have to take the case off every once in a while to clean it, but you'd have to do that with any case really. Get a lot of compliments on it.
dougstoner said:
I have the same clear hard plastic case and absolutely love it...
Click to expand...
Click to collapse
Does it add much bulk...???
da9th_one said:
Does it add much bulk...???
Click to expand...
Click to collapse
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
dougstoner said:
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
Click to expand...
Click to collapse
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
I just ordered some phantom skinz, I'll report back when they get here.
liht said:
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
Click to expand...
Click to collapse
I think it fits better than the body glove case. Plus, it looks way better. I've had mine for a while now with no problems. Even take it off a bit to clean it up, and no issues. Check my old thread out...Have pics on post #5.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case

Best / Thinnest (Preferably Clear) Case for G1?

I was searching around and could not find a gel/TPU type clear case for the G1...for those of you who do not know...here is one example of a Nexus One case like what I would want:
http://cgi.ebay.com/2-Soft-Case-TPU...t=LH_DefaultDomain_0&var=&hash=item746a91e417
I know they do not show a completely clear one, but that is the material/type of case I would like. It is not like a typical silicone case -it is slightly like a hard case being that it does not bend as easily and it is not floppy at all.
Any ideas?
Heres the problem that I see...
How would you open the keyboard with that cover overlapping the front of the phone? That would probably be the reason those style covers don't exist for the G1.
As my fellow Oregonian said.. Soft cases and a slide keyboard won't really work.. If you look at the hard shells you'll see how the screen has it's own little part that clips on.. soft shells wrap instead of clip on...
I fail to see why they could not have a separate piece to put on the screen...?
If there is no such case... then could someone recommend a thin, yet tough, hard case? (preferably clear)
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Kemekill Products said:
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Click to expand...
Click to collapse
Yeah I understand what you mean and thanks for that info...but - I was thinking not of a soft case 'clipping' onto the screen but you could slip a cover over it or around it -I am SURE there is some way to do it....
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
SolemnWishing said:
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
Click to expand...
Click to collapse
LOL WOW THANK YOU!!!! How did you find that ? it should not be labeled as silicone (I think)..... wow that is exactly what I am looking for! I knew it was possible.... any way - I wish it didnt cost so much, the others I see like it(on other phones) is significantly cheaper (like under $5.00 with shipping included).... If I cannot find any cheaper ones I will order that one...
Thanks again, I cant believe you found just what I was looking for...
SolemnWishing said:
I think this is what you are looking for:
QUOTE]
Thank you as well. Been looking for one just like that.
Click to expand...
Click to collapse
yea that case is rocking . I as well was looking for something like this! Thanks!! hey erebusting did you order it? did ya like it?
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
erebusting said:
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
Click to expand...
Click to collapse
LMAO...Reading this was funny for some reason
Can you post some pictures? And would you recommend it? I am looking for a new case for my phone, and this one is one that I am considering
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
zinite said:
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
Click to expand...
Click to collapse
zinite, I understand that, but see I do also have a screen protector on but the section of the case which goes on the screen is fitting fine, the section for the body is the part I have the complaint about. I will definately check out some Seidio cases now that you have mentioned that.
SolemnWishing, Here are some pictures of the case next to a clear hard case (which is actually clear and not yellow...)
Ace42, glad you got a laugh! haha...BTW I am wondering why you were laughing though, kind of odd to me ATM...
WOW! that case is really yellow. i was thinking about getting one thinking it wont be that yellow. but that is definitely gross smoker yellow
Dang... it looks like someone left that out in the sun for like a year or something..
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
mattv888 said:
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
Click to expand...
Click to collapse
I also love the feelings of the G1 without a case, but I have dropped my previous phones too many times to take that chance... haha
Any ways... Those pictures are from the same day of receiving that case, so it must be some fault on the seller....
its really a disappointment since there are no other cases (that I can find that is) like that for the G1...
any other recommendations/ideas?

Tilt 2 Strap/charm holder hole help

Ok so on the tilt 2 it has a strap/charm hole to put well a strap or charm on ur phone, and i used it alot! But recently the little plastic piece in the hole that holds the charm/strap snapped off on mine, Does anyone have any good suggestions on what I could do, I'm rather clumsy so a strap is rather needed
Where on your Tilt2 do you have such a hole? Mine does not.
redpoint73 said:
Where on your Tilt2 do you have such a hole? Mine does not.
Click to expand...
Click to collapse
Its on the back at the bottom center, right above the charging port, love the icon btw
Right here
Dragonmaster0430 said:
Right here
Click to expand...
Click to collapse
that is so obvious is not for a strap!, the only thing i can come up with is that is for some kind attachment whole for like an accesory or maybe a craddle, but definetly not a strap, i dont think, lol
the phone is too heavy and you prob snapped the plastic cover off a lot too didnt you?
but i would love to really find out trully what kinda accesory would attached to it
marmotabassriderx said:
that is so obvious is not for a strap!, the only thing i can come up with is that is for some kind attachment whole for like an accesory or maybe a craddle, but definetly not a strap, i dont think, lol
the phone is too heavy and you prob snapped the plastic cover off a lot too didnt you?
but i would love to really find out trully what kinda accesory would attached to it
Click to expand...
Click to collapse
Its called a hanger hole, its in the manual
http://www.htc.com/us/support/tilt-2-att/tech-specs/
No my plastic cover never came off
Anyone got and idea of how to fix it?
Looks like the holder is part of the phone frame. If the little T-shaped tab broke off, you may be SOL on fixing it. Perhaps you could buy a broken Tilt 2 off eBay (I've seen them) and transfer the part, but taking a phone apart and putting it back together correctly is not an easy task.
I never would have guessed that hole was for a strap or charm, although that's quite apparently what its for. The T-shaped tab under the battery covers sure doesn't look strong enough for the purpose.
never had a hole on mine, whered u get that from?! lol
Dragonmaster0430 said:
Its called a hanger hole, its in the manual
http://www.htc.com/us/support/tilt-2-att/tech-specs/
No my plastic cover never came off
Click to expand...
Click to collapse
oh... so you can wear the phone as a pendant... ya cause its so small and light i might mistake it for a necklace...
Same thing happened to me - I keep thinking how lucky I am it didn't go flying when it broke. I was able to loop the hanger through the square just to the left of where the "t" was - I can provide a pic shortly. Its been working so far...
apxi84 said:
oh... so you can wear the phone as a pendant... ya cause its so small and light i might mistake it for a necklace...
Click to expand...
Click to collapse
I never, ever would have guessed that that hole was for hanging the little charms off of. I once wondered why this phone didn't come with something like that when most phones did.
Amazing what reading the manual can do~!
love hanging charms
sorry about your luck.
yep, i love hanging a charm or a cute screen cleaner from the charm hole.
been using it for a year..hope mine doesnt do the same
npropanol said:
Same thing happened to me - I keep thinking how lucky I am it didn't go flying when it broke. I was able to loop the hanger through the square just to the left of where the "t" was - I can provide a pic shortly. Its been working so far...
Click to expand...
Click to collapse
Oh please do
I use a strap for mine. It works wonderfully!
Wow that's great. Does anybody know where to find a strap that would be good to wear my Tilt2 around my neck please? It would be great for working while wearing a wired headset. Hate keeping it in my pocket and I'm not happy with any of the holsters. Especially that oem one. That sucker will help a guy lose his phone in a hurry...
EDIT; Nevermind. I figured out to search for the words phone and lanyard on ebay. Decisions, desisions.
Memory card lanyards work fine too. I'm using a lanyard for a SanDisk MicroSD adapter for my phone. It works great.
Whoa, that little plastic bit holding the weight of a Tilt 2 on a lanyard or wrist strap? Sounds like tempting fate to me. I never have used a wrist strap on a phone and this definitely doesn't inspire me to try it now, lol. HTC should have built something a little more substantial than that into the frame if they wanted it to be really useful as a hanging point for the phone. I have been wondering where the strap on the HTC accessory page was supposed to attach, now I know.
Reply to Marlin29
Marlin29 said:
Whoa, that little plastic bit holding the weight of a Tilt 2 on a lanyard or wrist strap? Sounds like tempting fate to me. I never have used a wrist strap on a phone and this definitely doesn't inspire me to try it now, lol. HTC should have built something a little more substantial than that into the frame if they wanted it to be really useful as a hanging point for the phone. I have been wondering where the strap on the HTC accessory page was supposed to attach, now I know.
Click to expand...
Click to collapse
You are correct. It does look cheesy. However, so far so good. I do think it is important to be certain that the string of the lanyard is seated to the base of the "T" opening really well. Fortunately that is easy to pull off. Also I don't think I'd swing it around by the lanyard with the cover off. After a few weeks of using a wrist strap and a neck lanyard I don't see any signs of stress on the plastic. So maybe it will hold out.

Categories

Resources