Sorry about this, I know the info is out there but I can't find it.
Can someone let me know the shortcut keys to discover my Bootloader and Radio version.
ta
bb
(in the wiki dude )
press and hold the side ok and power buttons, then do a reset with the stylus using the rest button on the bottom of the unit (next to the usb port)
oooo...apols...thanks for the quick response though....
HERM300
IPL-1.00
HERM300
SPL-1.30.Olipro
I've done a fair bit of flashing lately (and just unlocked with POFs utility) and ended up with the above, trying to figure out if I have latest / safest versions.
Pro Black 2.0
Radio is at....1.16.00.00
Especially wondering if I should reflash radio after using POFs unlocker I think I may have downgraded the radio..all seems to work though.
Am going to check out the wiki...ta
Yes the radio is the hacked radio rom pof uses to unlock with.
If you are planning on using Black 2.0 please follow my guide as it will take you through updating hardspl and radios before the WM6 flash.
oh no, you got it wrong...it's black 2.0 NOW. Working well very happy.
It's just I did the unlocking with POFs after I installed black and I suspect I might have an older radio version now, am I safe to just bring my radio up? The phone is now unlocked for good i imagine, maybe I should just wait for the next black release.
Upgrade your HardSPL FIRST. Then Upgrade your radio
ok, ta...will do.
what version is my hardspl now...1.00 or 1.30 ?
something must have downgraded it
It might have been downgraded by the unlocker.......but follow the guides they will take you through everything.
worked a treat thanks...Radio up to latest version now. ta.
You updated HardSPL aswell i hope? (so you now have version 1.40.olipro)
This is the first time I'm trying to upgrade... I sync and tried upgrading to HardSPL v6 using the RUUWrapper.exe but the 3 options SPL-1.01 to SPL-1.11/1.13/1.30/1.35 are all greyed. I can only click on Force Using SSPL and Is it Hard-SPL.
I'm using X01HT.
HERM200 IPL-1.01
HERM200 SPL-1.04
What am I doing wrong?
Thanks!
Related
Hi all.
Well, I made the jump to the Hermes.....I missed you ex-wizard guys...LOL.
I was wondering, and have searched with little to no luck, for an easy way to check the bootloader version on my Softbank. I want to start playing with it a bit, but have not been able to determine the bootloader version. I am hoping that I can downgrade to the Dopod 1.04 bootloader rom. My device info reads;
Rom Version 1.23.707.4
Rom Date 7/21/06
Radio Version 1.14.00.10
Protocol Version 32.50.7018.00H
Any help would be appreciated. I did d/l both of the guides, but I am still just a touch confused........
Later............
hdbueller said:
Hi all.
Well, I made the jump to the Hermes.....I missed you ex-wizard guys...LOL.
I was wondering, and have searched with little to no luck, for an easy way to check the bootloader version on my Softbank. I want to start playing with it a bit, but have not been able to determine the bootloader version. I am hoping that I can downgrade to the Dopod 1.04 bootloader rom. My device info reads;
Rom Version 1.23.707.4
Rom Date 7/21/06
Radio Version 1.14.00.10
Protocol Version 32.50.7018.00H
Any help would be appreciated. I did d/l both of the guides, but I am still just a touch confused........
Later............
Click to expand...
Click to collapse
Put your phone into bootloader mode to get the version, then soft reset
Look here in the wiki to find out how:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Your bootloader version is the number after SPL not IPL
S.K.
Hot Damn, I have a 1.04 bootloader!!!! YIPPEE.....Play time !!!!
Thanks for the help......now all I gotta do is read whats best to use for a rom!
Later.......
silent_killa said:
Put your phone into bootloader mode to get the version, then soft reset
Look here in the wiki to find out how:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Your bootloader version is the number after SPL not IPL
S.K.
Click to expand...
Click to collapse
I can not find bootloader mode.
I followed these directions: Bootloader mode: Hold side OK and POWER buttons together and reset with stylus form this link: http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
side ok button is the one closest to the scroll wheel and the power button is the one closest to the top on the right side of the unit, right?
All I seem to be doing is rebooting.
Any ideas on what I may be doing wrong?
Thanks
Sometimes I jump the gun and let go of the power and ok buttons as soon as i hit reset with the stylus try holding the power and ok a moment longer.
Dave
Heh apologoies for title but im really stuck and desperate for any help!!
I have been trying to unlock my Cingular 8525 for many hours now without any luck.
I bought it off ebay knowing it was locked because I had seen these forums and knew it wasnt too harder job. I live in NZ we have a compatible 3G network here (they sell these phones branded as JasJams).
Anyway I dont have a cingular sim card, only a Vodafone NZ simcard. I dont know if that is a problem for me or not...
My problem is that I get part way through the update process and the connection between pc and phone gets cut everytime at the same place.
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
It then gives me the button to select the Update button (Update the radio and bootloader)
So I click that, it gives the next screen, click next, tells you its going to take 10 minutes etc, so click next,
It then instantly disconnects the active sync connection and about a minute later I get an error screen saying the unlocker encountered communications errors.
I have been through this whole proccess 6 times now with no joy
Someone pleeeeeeeeease help me
Thanks
im willing to pay for a code all i want is a unlocked sim phone none of this radio stuff etc
try Wiki
http://wiki.xda-developers.com/
or alternatively
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Thanks but not really helpful, I have read the wiki through and through. I have tried that flashing HardSPL v7 and i get exactly the same problem.
PLEASE somebody help me
The only piece that is confusing is what to do once your done. The instructions say that you will be replacing your radio with a tweaked one to allow the unlock. After the entire process is done I assume you will need to have your favorite radio (1.40.3 in my case) handy to flash back onto your Hermes?
I also assume that flashing your favorite radio back to the Hermes won't lock it back again.
To be honest, I'd suggest going back to basics. You could try quite a few workarounds and end up doing this anyway..:
Reflash the original ROM your phone came with. Should be found easily via wiki.
Then you can start upgrading again.
If that's difficult, try flashing from your MicroSD card, which I've found never fails, having bricked my Hermes quite a few times now with my own cockamayme (sp) versions of ROMs that I've cobbled together from bits of code and chewing-gum.
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
amet said:
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
Click to expand...
Click to collapse
She want's to SIM-Unlock, not to CID-Unlock.
Do you use Vista? I encountered a similar problem with Windows Vista. Try a PC with Windows XP for the unlocking process.
ok my bad....
I've seen this issue with v1.4 Olipro. Upgrade bootloader to the latest Olipro 2.1 version then re-attempt.
ok thanks everyone for your advice but i am still screwed.
im not running vista.
i can not upgrade to olipro 2.1 because the upgrade utility always gets error 260 (update error) the update utility cannot connect to your PDA Phone.
I have now tried on 3 computers, my own, my parents and my work all resulting in the same thing.
I think now I will try and flash a WM6 rom onto my phone just using the olipro 1.4 and the custom RUU updater and see how I go but I dont have much hope
ok im currently updating the rom to wm6 as posted on the forums and oh my gosh i have a progress bar for the first time ever!! woot~~
um ok. now i have WM6 dopod version and fkn still sim locked someone help me before i throw my phone at the wall lol im going on holiday tomorrow and will have no phone for a week if i dont fix this in the next 3 hrs
Sim Unlock
http://forum.xda-developers.com/showthread.php?t=293665
laurasaur said:
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
Click to expand...
Click to collapse
Do *NOT* soft reset your phone here, it is normal that activesync disconnects while the pda is in bootloader mode (activesync only works while OS is running). Just click "next, next, next" in the RUU and it will go fine.
woooa i think i love you Pof, I seriously do. Im not sure how I became such a noob at reading instructions but im sorry and thank you so much I now have progress bar
if you're short on time avoid any radio updates, they seem a bit hit and miss - its not worth upgrading then going away to find you've got a tossy signal!!!!
hope it worked out!
Ok well I had a unlocked 8125 and I stumbled across a new 8525 for 150, so I picked that up... Now I should be getting it tomorrow and my question is this...
I'm assuming I fall under the post April category(being brand new) with the difficult SIM unlocking procedure... Now I'm not really in to switching around my carrier, I have AT&T its a AT&T branded phone and I'm fine with that... the only thing I really care about is being able to flash different OS roms and whatnot.
So do I just run the auto unlocker and only select CID unlock??
I've been trying to read and find out if the auto unlocker CID option will still work for post April units but I haven't been able to find the response yet.
Or am I totally in left field on this??? Do I need both CID and SIM unlocked to do OS rom flashes??
I acquired the 8125 already unlocked and those tend to be easier to do stuff to than these, or I'm just not reading the right thread.
Any info is appreciated.
I will not be turning the unit on till I hear a response from you guys. Worse case I just wont let the customization complete.
BerettaFreak said:
Ok well I had a unlocked 8125 and I stumbled across a new 8525 for 150, so I picked that up... Now I should be getting it tomorrow and my question is this...
I'm assuming I fall under the post April category(being brand new) with the difficult SIM unlocking procedure... Now I'm not really in to switching around my carrier, I have AT&T its a AT&T branded phone and I'm fine with that... the only thing I really care about is being able to flash different OS roms and whatnot.
So do I just run the auto unlocker and only select CID unlock??
I've been trying to read and find out if the auto unlocker CID option will still work for post April units but I haven't been able to find the response yet.
Or am I totally in left field on this??? Do I need both CID and SIM unlocked to do OS rom flashes??
I acquired the 8125 already unlocked and those tend to be easier to do stuff to than these, or I'm just not reading the right thread.
Any info is appreciated.
I will not be turning the unit on till I hear a response from you guys. Worse case I just wont let the customization complete.
Click to expand...
Click to collapse
You only need to do CID for that purpose. You are correct. Of course, doing SIM won't hurt you, but you only NEED CID.
Ok so when I get this phone... turn it on, do touch screen thing, do other crap, and CANCEL the customization with a soft reboot??? and then I can sim unlock it?
What sim unlocker do I use and whats the best radio for my location? Phone will actually be delivered today so this is why I'm asking.
Wait I think I got it... Turn on phone... Reboot before customization...
Run AUTO_Unlock_v3a once connected, after 1.16 radio installed then run Herm_Unlock_v3.exe to unlock it and once that is done run SoftBank_1.33.761.4_Extrom to remove the bootloader update.exe and then I can hard reboot without problems...
That sound right? This is following POF's thread on how to unlock these... http://forum.xda-developers.com/showthread.php?t=301952
I just run olipro 2.10 hardspl v7 and then I can flash any rom and radio I wish.
Yes but mine is a post April release phone which aparently has a radio bootloader update to 0182 which then makes the Radio rom un updatable, or impossible to unlock the sim.
Unless I dont need the Sim unlocked to do radio updates... but the more I read leads me to believe I wont be able to update the radio if I let the 0182 radio bootloader update run.
OR unless I'm completely retarded and this doesnt apply to the AT&T 8525.... I cant really find that on here.
Either way I'M LOST!
Yeah I think I'm retarded and read too far into this... I don't think the AT&T 8525's have this Radio Bootloader update thingy thats coming on the SoftBank phones...
Well all is good... fired the phone up, used it for all of 20 min before I used the auto unlocker on it unlocked CID and SIM, and then flashed it with VP3G WM6 rom, and the newest 1.54 radio... all is good so far.
Ok, I think I'm still at 1.04 IPL and 1.40 SPL, Olipro, is it worth it for me to install the Hard SPL v7 update??
IPL and SPL stuff on these phones are slightly more confusing than on the older 8125's
Also how do you get to the 3 color boot loader screen manually?
I did a HTC WM6 flash, wasnt very impressed and went back to the vp3G setup... Also is the 1.54.07 radio any good... the HTC rom put me down to 1.48 and since the 1.54 takes 20 min to upload I may leave it as is right now.
BerettaFreak said:
Ok, I think I'm still at 1.04 IPL and 1.40 SPL, Olipro, is it worth it for me to install the Hard SPL v7 update??
IPL and SPL stuff on these phones are slightly more confusing than on the older 8125's
Also how do you get to the 3 color boot loader screen manually?
I did a HTC WM6 flash, wasnt very impressed and went back to the vp3G setup... Also is the 1.54.07 radio any good... the HTC rom put me down to 1.48 and since the 1.54 takes 20 min to upload I may leave it as is right now.
Click to expand...
Click to collapse
I would update to the latest HardSPLv7. Oli makes it better every time - more protection.
1.54 is an AT&T release, so it is probably better than 1.48. I think 1.50 was also an AT&T release, but you can use it and see if it works. The biggest difference usually seems to be battery.
Regarding putting into bootloader screen, I don't have my phone on front of me, but I am sure it is in the wiki. It is a right side button, a left side button and the press the reset hole on the bottom. I think it is the bottom side buttons - OK, PTT and the reset hole. (I think)
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB
Hi,
i must sent my hermes to repairs. so i have to restore it to wm5 and old bootloader.
i have some problems with the gsm module. sometimes i get "no gsm" in the bootscreen and after boot no phone functions. Some time i the radio shows up in boot and i get phone functions. the problem did not appear after a flash. the last flash a month ago.
it seems that the hardware that there is a loose connection. when i make a test call and knock the phone (softly) the phone connection is lost. the "end call" button does nothing and after a while the whole os freezes.
has someone another idea than faulty hardware?
OS is restored to original with the help of mrvranx guide.
whats left is the bootloader and the shipped radio rom.
Bootloader screen shows:
Herm 300
IPL-1.04
SPL-2.10Olipro
Radio Rom is 1.47.30.10
Im a little concerned about mrvranx warning: "If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error"
but on the next page is a guide to flash the bootloader back step by step to the original. is this method save? and does anybody know which one was the shipped one (t-mobile germany).
last the radio. i can't remember which was the shipped version.
and can i flash whithout problems back to the original? somewhere i read about problems because of the bootloader.
and the last question
in what order must i do this. first radio then the bootloader is right?
many thanks in advance.
washi
just today I had to get my old TYTN ready for warranty/repair.
I followed mrvranx's guide to downgrade my bootloader and it worked flawlessly. I did it all from an XP computer as I was having issue on my Vista machine. Follow it to a T and you should not encounter trouble.
As for the order, I don't think it matters. I did my radio last if you just wanna follow my lead.
As for determining the radio and boot loader version - I'm with Rogers in Canada, they send me my replacement device before I send them the faulty one. I just go into bootloader mode (power on the right side+ok on the left side+reset button at the bottom) and verify the version.
just checked my radio bootloader version. its 108.
so i wont be able to flash a radio < 1.3x?
which is unfortunate because the t-mobile germany never actually offered an official update :/
i just hope the handy will pass with the old os and old bootloader but newer radio.
Is this really needed?
I have to send my phone in as well and didn't know if it was really necessary to do all the downgrading and stuff? i guess can't hurt to be safe though huh
Hey Guys,
I am in the same boat as you all, I am with Rogers and unfortunately MRVANX guide is not online at present, can any one help. Also if you can tell me if it is at all possible, my IPL is 1.04, SPL is 2.10.OLIPRO and Radio version is 1.54.07.00 I am using FARIA.32 ROM
please help.
Thanks
Himanshu