Ohh yeah baby,
It's been done. They havn't said it has been done, but I assume that it has since I have checked their sice a couple times a week for the past couple of months just waiting for something to be said. They have removed the message about Softbank phones being unable to unlock. So I "ASSSUME" that you can now fully crack your phone with Softbank v1.09. Also for the simle fact that it is version 4 http://www.imei-check.co.uk/M3100v4Unlock.zip of their software instead of version 3. So, now we can crack, our X01HTs, we can downgrade to 1.04, flash with a English rom, then downgrade again to 1.01 and then flash with our custom splash screens.
Imei-check has cracked post December Softbank phones.
www.imei-check.co.uk
-Joe.
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Success!!
I tried as soon as I saw this post, I had previously bought the IMEI thingy (technically speaking) and realized that my phone was a post Dec. (I originally thought I got it in November, but I realized that I was just an idiot)
anyways a couple minutes later I'm using my Docomo Card on my unlocked Softbank phone.
I'm not gonna lie, it was well worth the $40.
Now, I am not sure if my mail is working. So you guys have any idea about the Docomo mail if that works or not on the Hermes?
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
keiuchid said:
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
Click to expand...
Click to collapse
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i meant "this problem is not coze of UK IMEI Unlocker", it will be happen on another hermes too)
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Asukal said:
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i didnt mean this probelem is not coze of UK IMEI Unlocker, it will be happen on another hermes too)
Click to expand...
Click to collapse
Thank you your attention.
I don't flash other rom, only use unlocked this.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
I also have the same situation, will it be able to unlock if mine is downgraded to 1.04 and flashed HK rom.
doitfu said:
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
Click to expand...
Click to collapse
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
keiuchid,
Same here. I don't understand what the process is. If "they" means imei-check and if you have their written response on the process, please copy that and paste it in your reply here. It doesn't matter if it's long.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
mj13 said:
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
Click to expand...
Click to collapse
It's ok , i have bought the unlocker,it absolutely works on my X01HT.so i enjoy it now.
qtotter said:
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
Click to expand...
Click to collapse
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
keiuchid said:
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
Click to expand...
Click to collapse
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
doitfu said:
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
Click to expand...
Click to collapse
I also can not do.
My x01ht is before 12.2, so can not do ?
mj13 said:
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
Click to expand...
Click to collapse
It finally succeeded.
Thanks a lot.
Hi all.
My Softbank has b/l 1.04 and the 1.14.00.10 radio on it. To use this method,which rom do I use for the 1.09 b/l? I looked at wiki,and the only one was a Japanese version for softbank. It does not match my Softbank, so I am not real sure which way to go. Is there a Dopod rom with the 1.09 b/l?
BTW.....My Sb is an HERM200 with the Dopod splash screen and was shipped with the Dopod 1.23.707.4 WWE Rom, IPL 1.01,B/L 1.04, and the dreaded 1.14.00.10 radio on it.
Thanks................Later
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
I can think of 2 ways to do this.
The first way requires that you have already made your Hermes SuperCID. Essentially, you flash the 1.01MFG bootloader then use that to flash the 1.04 Bootloader. Once complete, you'll be able to upgrade your radio. See the 1.01MFG bootloader thread for files/howto. I believe its all in the Wiki too.
If you are not SuperCID, then you must find the bootleg 1.04 bootloader flash solution to upgrade your radio.
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
Check your PM
By all means, take the time to SuperCID your device using pof's solution once you're on BL1.04 sam2000
i try many time to flash the 1.04 Bootloader by flash the 1.01MFG bootloader
and evry time error
can you tell me mr Sleuth255 how can downgrade from 1.09 to 1.04 stps by steps
thanks for you
If you are not SuperCID then you cannot succeed until you obtain the bootleg 1.04 downgrade solution. We do not host that here as it contains proprietary IMEI_check code.
However, from you first post it appears that you may be SuperCID since you are running the SA 1.35 TyTN ROM on a JasJam device. If that is the case, you can simply flash the RUU radio upgrade RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe.
edit:
to your question: the key to flashing the 1.04BL from the 1.01MFG bootloader is the version of mtty you are using. If you are trying to follow the instructions using a version of mtty that has the default "MFC" icon, then it won't work. You must use the version of mtty included in the 1.01mfg bootloader download.
my device SuperCID
Best option is to upgrade radio using RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe then.
How to downgrade from BL 1.09 to 1.04
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
slob13 said:
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
Click to expand...
Click to collapse
Dead Link!
The bootleg 1.04 bootloader solution is actively pursued by IMEI-check. It never surfaces for very long....
However, sam2000 doesn't need this since he is already SuperCID. The 1.01MFG bootloader solution can get him to 1.04BL.
Hi...
I've this problem where my friend's Dopod 838 Pro has its flashed crash at 14% and now its Bootloader is 1.09. Its giving the NO GSM error but I cannot seem to downgrade the bootloader because its CID is also corrupted. It doesn't even accept the generic Dopod ROM upgrade!
Anyone one help?
I've used this method several times and it worked for me:
http://forum.xda-developers.com/showthread.php?t=284401
holy hell.. it works.. apparently that M3100v3cUnlock **** does something wonderful...
thanks patmannyc
finally i upgrade to RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe but bootlodr stil 1.09
thanks for every body
Hi Guys,
I need to downgrade my phone for warranty purposes. Can any one of you give little further detail about what I need to get back to orginal rom/radio/spl and bootloader. Or in short to be able to send it back for warranty as for some reason my phone keeps dropping the GSM signal(tried flashing GSM-Radio and OS roms but no luck).
Following specs worked great for almost 6-8 months and now keep dropping signals
These were the specs from current ATT 8525 (HERM100)
AT&T 8525 (Hermes 100)
ROM: vp3G's WM6 v3.60 "Full" + Add-Ons
Radio: 1.54.07.00
IPL: 1.04 | SPL: 2.10.Olipro
I have already flashed OS and GSM ROM back to the latest ATT ROM from this link (http://www.htc.com/us/SupportDownload.aspx?p_id=65&cat=2&dl_id=67). So current specs under device information are
AT&T 8525 (Hermes 100)
ROM: 3.62.502.3
Radio: 1.54.07.00 (This is not showing as currently there are no signals on phone)
IPL: 1.04 | SPL: 2.10.Olipro
Or do you think I should flash the device to the original ATT ROM (factory installed) from this link (http://www.htcamerica.net/support/8525/software-downloads.html).
Once this is done, I wish to rollback SPL and Bootloader back to factory settings. I am not sure the original version of the spl and bootloader. So if you think it's anyhow possible, can you guide me through the instructions?
I have 10 days before I return my current device with replacement unit.
Thanks in advance
AJ
Downgrading SPL and ROM
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
nbhor said:
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
Click to expand...
Click to collapse
Great !! Worked like Charm !! Back to factory settings and ready for replacement.
Thanks mate
Hi,
I have a touch dual running 6.1 which I unlocked but installed the incorrect radio back onto so now it doesn't ring.
After unlocking I upgraded sspl 1.16.exe and now have spl 1.16 hard which won't let me install the radio version I need 1.58.16.27 (this version is running on another phone with the same set up but is locked.)
I have seen with on these pages instructions like run uspl then spl1.15 but these don't seem to work for me. I flashed the rom but still have spl 1.16 hard although I am informed that the device is "Test only not for sale" on boot up.
Is there a sure fire way of downgrading or is there a way of reinstalling the correct radio in spl 1.16.
Am I doing something completely wrong. Thanks for any and all information.
b1968 said:
Hi,
I have a touch dual running 6.1 which I unlocked but installed the incorrect radio back onto so now it doesn't ring.
After unlocking I upgraded sspl 1.16.exe and now have spl 1.16 hard which won't let me install the radio version I need 1.58.16.27 (this version is running on another phone with the same set up but is locked.)
I have seen with on these pages instructions like run uspl then spl1.15 but these don't seem to work for me. I flashed the rom but still have spl 1.16 hard although I am informed that the device is "Test only not for sale" on boot up.
Is there a sure fire way of downgrading or is there a way of reinstalling the correct radio in spl 1.16.
Am I doing something completely wrong. Thanks for any and all information.
Click to expand...
Click to collapse
Don't worry buddy, just flash a rom with a radio, or flash another radio and your device will ring again, for Niki roms with radio take a look HERE
Goodluck,
Worked a charm
Thanks for taking the time.
Ben