can you still sync using missing sync with AKU 3.3? - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I just need to know before I upgrade my ROM!
Thank you very much

I just posted a question a few threads down.
Missing Sync works fine for syncing data. But, I am having trouble getting USB to connect via Internet Connection Sharing. Whenever I connect, it will kill BT on my Mac and no internet connection will happen.
But, then again, this feature was not available for the previous ROMs so nothing to lose or gain.
Ted

It actually doesn't work now!
I get an error about upgrading to Activesync 4.5
Does anyone know of a registry hack to make Missing Sync and WM6 work together?

Related

Help - Calling anyone who uses a TomTom Go 910/710/510 with their Hermes

I have a TomTom Go 910 and an M3100 running WM6.
I have been using the hands-free BT connection with no problem.
However, I recently tried to set up a data connection to access TomTom Plus services through the phone over BT, and the setup routine fails every time. (I have no problem connecting to the internet over WAP from the phone in general).
Of course, TomTom support refuse to help, telling me that the phone is not supported for the 910. According to them I should not even be able to use the hands-free feature...
Before I go spending hours trying different ROMs and BT stacks etc., does anyone out there have the same setup (even with a 710 or 510) and got it to work? (No point wasting time if they are simply not compatible and no one has actually got it to work).
Thanks for your help
My very basic guess is that you need to use the Internet Connection Sharing program on windows mobile, as just paring the devices won't do anything.
So I guess I fire ICS up and and choose Bluetooth PAN and then try to see if TomTom sees it.?
I'll try tonight and report back.
Thanks for the suggestion.
Let us know how it goes. But isn't WM6 lacking either PAN or DUN that's required to establish the connection?
No luck using ICS
Percz said:
My very basic guess is that you need to use the Internet Connection Sharing program on windows mobile, as just paring the devices won't do anything.
Click to expand...
Click to collapse
Well, I tried it... no luck. TomTom still insists on going through a DUN setup routine (entering access point, GPRS dial-up number, etc.) and promptly fails both with automatic and manual setup. It does not detect the PAN already running with ICS connected.
I wonder if DUN can be ported back to WM6 with CABs from WM5?
Any other ideas?

WIFI instead of GPRS

Hello i have PDAVIET 4.0.0.0.4 and i have a problem when i m connected to a wireless spot, and i want to signin to msn it uses my GPRS connection although i am already connected to the internet.
Any suggestions?
Thanks!
click cancel on baloon tooltip,and i'm not sure about your rom version,pdaviet maybe?
yes sorry
))) did you solve the problem ?
nope sorry
I'm with rom 4.0.0.3a and I also experience this. I tried using Live messenger connected to activesync through usb cable connection, but instead of using the activesync connection, he tries to connect over gprs!!!! Argghhhhh!!!
Beside iassael, the others who run 4.0.0.4 are also experience this bug??
i think so and i also had the same withh 4.0.0.0.3
well, I don't have wifi by my computer, but I soon will, so I'm interested in this issue...what about trying what this guy says;
It is a solution to a different problem, so maybe a bit of a long shot, but something he says there;
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
Click to expand...
Click to collapse
made me think it could be worth a try.
http://forum.xda-developers.com/showpost.php?p=1283391&postcount=1
did you fix it?
I dont see how this will work. If default is set to not GPRS, you have to have wifi or connected to computer. it will not use GPRS as backup. at least i havent been able to get it to think that way on WM5 and WM6.
any solutions to the login problems using ? I still couldn't access MSN with PDAVIET 4.0.0.0.4 ROM

Pass-through with ActiveSync?

I have been looking everywhere for information on this. Is pass-though possible with the Cingular 3125, using Cingular's newest ROM? When I plug my phone into my computer, it isn't able to see the Internet at all because that automatically disables GPRS. I would really like to use my laptop's much faster Wifi connection. If that isn't possible, can I at least keep GPRS on?
thanks in advance
Try from active sync's settings->connection settings to put-> My computer is connected with:
internet
Yes, that is set. Still no luck. Does this work for you? I remember one of my former Windows Mobile devices (I think the Motorolla MPX220) had an option for Pass-though in the settings, but I don't see it anywhere on the 3125.
I didn't have any problem with that. Now I use the greek qtek rom but before I used the cingular rom for some weeks and I never have problem with internet connection via active sync.
hrm... anyone currently running the current Cingular ROM able to help me out?
First to make clear that I used this rom that you talking about without internet connection problems.
Sometimes helps to uninstall, reboot and reinstall active sync. Like this some problems solved.
And if you have a bluetooth device on your pc you can try to connect to active sync via bluetooth, and check if the internet works in that case.

Help with Activesync Error Message

I have a att 8525 with wm6. My pc has windows xp home edition service pack 2 2002 edition. When I connect phone via cradle upon reboot of the pc I get a message new hardware found it then tries to sync. After this attempt I get a message device not detected so I do the troubleshoot after the trouble shoot it comes up with 2 issues one which really confuses me. I downloaded activesync version 4.5 but here is the message I get below
1 To synchronize email etc with your PC Microsoft Outlook XP or later must be installed
2 Unable to establish a connection between pc an my device. It then gives a link to a guide for this with all sorts of changes to make on the phone etc. I have performed a great deal of them changes enabling and disabling settings they ask for etc but this has not resulted in any change or a connection
My biggest question concerns the first issue mssage I get. 1 unable to synchroniz with my pc because it seems to says Microsoft Outlook Xp or later must be installed. When i went to install the activ sync my windows xp home edition was listed as compatible. So I am very confused here. Do I need to upgrade to the outlook 2007 ( More Money damn ) or is there another way perhaps a lower version software or am I missing something. If it matters i am connected via wifi wireless router which I just installed Any Help will be greatly appreciated, greatly
Mike
Long Island
I couldn't sync after I did my first ROM upgrade and it was an official upgrade from AT&T, thats how I found this place. I would suggest reading through the Hermes WIKI, then looking through the Hermes section, it was a REALLY BIG help to me. Now on to your questions:
You have to have MS Activsync installed on th PC, I would try finding v4.2 as I have been having problems with v4.5 and 4.2 fixed it.
Are you trying to sync with the USB or just with the WiFi connection???? I don't think you can sync via WiFi or Bluetooth.
You only need Outlook 2007 if you use it as your E-mail client (I don't use MS Outlook or MS internet explorer).
Sync Solution!!
I had the same problem. I tried on my 3 pcs & figured out. USB connection is the best for all connection & sync.
Microsoft Outlook XP or later is must to sunc contacts & e-mail. if you dont have those & have Outlook Express you need a program (I forgot the name) to install in your computer & cab in DPA which sync contacts with Outlook Express.
i did following.
For sync connection make sure you have all security disable or you allow main 4 files to communicate. check this troubleshoot for help on allow files for different security programs.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
once you see device detection click "Explore" on active sync even it is connecting the device..if you see the phone files it means it is connected but somehow not synchronizing.
then try to muck aroung advance USB connection tick & untick. and also connected via The Work & The Internet connections in connection settings.
Hope it helps.
V
This happens to me when I upgrade to a new ROM, and I am unable to resync via ActiveSync. The first thing I check and gets me back to be able to sync 99% of the time is the USB setting on the phone.
Go to->Settings->Connections->USB to PC->Then UNCHECK "enable advanced network functionality"
That always gets me back to be able to sync again via USB. Hope that helps...(a little late I know....)

Weather problem!!!!!!!!!!!!!

I've seen all the topics on how to fix the Touch flo weather not updating problem and no solution for prophet yet...nothing works.. I'm using the new Manila 2d rom from varanusvincent if that is of any help..The funny thing is that if i connect my pda to the computer the weather updates from active sync i belive,but it keeps giving an eror when i try updating it from gprs,it's really stresfull...
i am using the same rom and my weather updates ok every time i connect to the internet
either do I. I use activesync to update weather application. And no Problem at all.
yeah i use active sync to,but it would be nice to not need a computer to update it,from what i've learned this problem has something to do with the proxi server.
vladvermillion said:
yeah i use active sync to,but it would be nice to not need a computer to update it,from what i've learned this problem has something to do with the proxi server.
Click to expand...
Click to collapse
If you dont use a computer to update it. You need Internet Connection from WLAN. or GPRS Connection to communicate with accu weather.
I test it all.
with WLAN , active sync through cable, activesync through bluetooth and gprs connection.
And all succeed.
Yeah i uderstand but it doesn't work from my gprs and that was my greatest complaint,and i've seen a couple of post regarding the same problem,and none of the solutions provided were usefull,this one:manila2d N2A patch made my Touch Flo not work so i don't know what the problem is,any way very nice rom btw

Categories

Resources