Can anybody tell my how can i fix this,pls......?!I`ve tryed to flash with dopod WWE rom,and it`s stuck on bootloader,i`ve try with hard reset,soft reset,no result.....I think if can try with ameo de dom it will back to live,but i don`t have that rom........................Help me if you can.10x in advance
bleki said:
Can anybody tell my how can i fix this,pls......?!
Click to expand...
Click to collapse
i think you should give a bit more detail if you expect people to help.
Put yr device back into the bootoader mode..disable Async from yr PC, start mtty utility(If u do not hv search the forum and get it) after start select USB and press enter.Then type "set 14 0" do not copy paste and press enter Hard reset
I flash it with a DE ROM and Ameo wake up.Next time i will try your way 10x.
hdubli said:
Put yr device back into the bootoader mode..disable Async from yr PC, start mtty utility(If u do not hv search the forum and get it) after start select USB and press enter.Then type "set 14 0" do not copy paste and press enter Hard reset
Click to expand...
Click to collapse
hi
sorry it doesn`t work here..any solutions ?
thanks..
ahmadfarid said:
hi
sorry it doesn`t work here..any solutions ?
thanks..
Click to expand...
Click to collapse
I think you are not stuck in bootloader, I think you are stuck in the Flash ROM utility which has colors and not just the Dopod logo with a black scree. If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with dutty's good NBH tool found at: http://forum.xda-developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh with the same files but it didn't allowed me to insert some items like the SIRFBootLoader.nb and some others, so I started executed the ROMUpdateUtility.exe again and it stopped again at 1% but with a different error "Corrupted ROM Image" and suddenly! My device was taken out of the Flash Utility to see the bootloader screen again! Wow! What a relief!
Hope this helps, it worked for me!
bogusiano said:
I think you are not stuck in bootloader, I think you are stuck in the Flash ROM utility which has colors and not just the Dopod logo with a black scree. If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with dutty's good NBH tool found at: http://forum.xda-developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh with the same files but it didn't allowed me to insert some items like the SIRFBootLoader.nb and some others, so I started executed the ROMUpdateUtility.exe again and it stopped again at 1% but with a different error "Corrupted ROM Image" and suddenly! My device was taken out of the Flash Utility to see the bootloader screen again! Wow! What a relief!
Hope this helps, it worked for me!
Click to expand...
Click to collapse
yeah correct it is the colour screen...i`ll try and thanks..
bogusiano said:
I think you are not stuck in bootloader, I think you are stuck in the Flash ROM utility which has colors and not just the Dopod logo with a black scree. If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with dutty's good NBH tool found at: http://forum.xda-developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh with the same files but it didn't allowed me to insert some items like the SIRFBootLoader.nb and some others, so I started executed the ROMUpdateUtility.exe again and it stopped again at 1% but with a different error "Corrupted ROM Image" and suddenly! My device was taken out of the Flash Utility to see the bootloader screen again! Wow! What a relief!
Hope this helps, it worked for me!
Click to expand...
Click to collapse
bogusiano
you`r the men..thank you for helping me..my device is alive again...
thanks you again
I solve the problem by you method
Thanks bogusiano.
Related
to get out of it, is very simple... remove your minisd then press "ok"+"power"+"reset"
it should work unless u damaged your spl. if you damaged you spl, copy original one from RUU_Athena.... and rename it to ATHEIMG.NBH then copy it to you sd, then press "ok"+"power"+"reset"
i'm not sure it all will work for everybody, but thats what i tried and it did work for me...
good luck playing with your athena, but be careful
it should work unless u damaged your spl. if you damaged you spl, copy
original one from RUU_Athena.... and rename it to ATHEIMG.NBH then copy it
to you sd, then press "ok"+"power"+"reset"
Click to expand...
Click to collapse
I tried this and still in white screen(after change from Spanish to English and disconnect error occurred).
Hi,
i have a uk ameo from tmobile, will it work if i take the nbh from htc wwe version ?
My case in detailes...
I have original HTC Advantage 7500 not branded with Spanish windows . After tried to update with English RUU my htc Advantage stuck in 3 colors boot-loader mode. Any resets(soft, hard, boot-loader) not help.
Than I find this suggestion here I tried it and it help:
I think you are not stuck in bootloader, I think you are stuck in the Flash
ROM utility which has colors and not just the Dopod logo with a black scree.
If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.
00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside
ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with
dutty's good NBH tool found at: http://forum.xda-
developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh
with the same files but it didn't allowed me to insert some items like the
SIRFBootLoader.nb and some others, so I started executed the
ROMUpdateUtility.exe again and it stopped again at 1% but with a different
error "Corrupted ROM Image" and suddenly! My device was taken out of the
Flash Utility to see the bootloader screen again! Wow! What a relief!
Click to expand...
Click to collapse
this is done!
after my Spanish OS reloaded and I can to do ActiveSync with PC - Than I find this suggestion in this thread and I tried it and after 5 min connecting error occurred . After hard resetting after this "update", after the HTC boot screen I just get a white screen. The HTC does make a sound as if it's working and BT and WiFi leds blink. When device connected to PC the HTC does make a sound as if it's working, but the ActiveSync in PC write that can't to connect to mobile device. And I just can't see anything.
Now I can't find Spanish HTC Advantage 7500 not branded RUU in all World.
Any ideas.
I succeeded with mine
Thank you. I was wondering whether I had actually bricked my athena, but then your tip helped me out....
Ken_xda said:
Thank you. I was wondering whether I had actually bricked my athena, but then your tip helped me out....
Click to expand...
Click to collapse
Good Tipps ! LOVE THEM !
thanks for help !
hey))) as promised, the Soft-SPL and Hard-SPL
1. Soft SPL - loaded to ram temporarily, erased after reboot, use it to flash HardSPL or tested working roms.
2. Hard SPL - A version which is flashed to rom.
So, what`s this?
1. Based on oxygen spl, but
1. Doesn`t check CID
2. KeyCard security is reset
3. Allows to flash unsigned (custom) nbh files.
http://rapidshare.com/files/65732449/hspl.7z.html
Instructions:
1. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen
2. Connect USB to pc
3. From the flasher folder run ROMUpdateUtility.exe and follow instructions to flash the Hard-SPL if needed. or you can flash *ANY* oxygen rom
4. After flashing Hard-Spl, to avoid reflashing, use
nbhextract ruu_signed.nbh
with any official update.it will dump the nbh. you`ll see some file like 00_OS.nb0 or 04_OS.nb0, any *_OS.nb0
use Htc Rom Tool (can be found on forum) and go to build rom, select OXYGEN, use 1.0.000.0 version, and go to system box, and press "..."
Load your os.nb0 and press build rom. then you can use this nbh to flash os. just replace original nbh file within updater directory.
p.s. sorry, have problems with wm6 - no info when i`ll finish it
Good Jobs :d
THANX SPV3DEV foor tool . WM6 for tis device ?
THANK YOU GREAT JOB. not tested yet. but thanks for the efforts.
how is WM6 comming as you promised?
sp3dev,
Thanks I have CID unlocked my phone.
Please I need to SIM unlock it.
how I can do it?
Please help.
Doesn't work for me.
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
quell said:
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
Click to expand...
Click to collapse
You passed in boot mode? Long push camera and short power.
No...I didn't pass. Phone has white screen, when I run RomUpdateutility.exe before flashing shows me error.
Have ideo when your WM6 rom will be finish ?
Thx for the tool , great job .
wm6
HI. Please Guide coking rom for Htc S310? Thanx
quell said:
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
Click to expand...
Click to collapse
I've this problem too. Running windows vista aswell. Anyone found a solution?
RUU on vista
the solution is here:
http://www.modaco.com/content/Windo...U-on-Vista-It-can-be-done-the-ultimate-guide/
Hello all
my phone is fully unlocked
i soft-spl my orange c100(htc 310) and when i tried to hard-spl it just crashed wile writing the new spl
now i am stuck at tri-color boot screen
Does somebody have orange c100 romania rom?
Thanks
Maybe you will help me...
sp3dev said:
4. After flashing Hard-Spl, to avoid reflashing, use
nbhextract ruu_signed.nbh
with any official update.it will dump the nbh. you`ll see some file like 00_OS.nb0 or 04_OS.nb0, any *_OS.nb0
use Htc Rom Tool (can be found on forum) and go to build rom, select OXYGEN, use 1.0.000.0 version, and go to system box, and press "..."
Load your os.nb0 and press build rom. then you can use this nbh to flash os. just replace original nbh file within updater directory.
[/QUOTE=sp3dev]
Hello!
Maybe you Sir have an official Oxygene ROM image? Maybe you dumped it for yourself before all thos updates? I am extremally looking for it Please let me know if you could send it or upload somewhere.
Best greetings,
RA
Click to expand...
Click to collapse
Hi,
Where do I place hard spl?
When pressing this I first press camera and then open spl.ink ? Or is there another way I should do this?
i am from romania and i have spv c100.
if you could tell me how to back-up my rom i will help you.
hi SP3DEV
in step 1. "Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen" how do I do this? I copied the 3 mentioned files to root directory but how do I hold the camera and launch spl.lnk at the same time. Please explain this thoroughly. I just bought an HTC S310 and want to upgrade my toy. Thank you much
charlietruong said:
in step 1. "Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen" how do I do this? I copied the 3 mentioned files to root directory but how do I hold the camera and launch spl.lnk at the same time. Please explain this thoroughly. I just bought an HTC S310 and want to upgrade my toy. Thank you much
Click to expand...
Click to collapse
same problem.. any solution?
Cease & Desist!
Hard-SPL is *MY* trademark, I never said you could use it.
PSYCHE!
just kidding, but tell me sp3dev, when you disasm the SPL; are you actually rebasing the file, or just going at it by trial and error... because it shouldn't take more than 5 minutes to hack up a Hard-SPL and SSPL.
Also... really you should only call it Hard-SPL if it prevents itself from being overwritten, otherwise it's just a USPL... not that I particularly mind.
I did the HardSPL and then tried to upgrade to Crystal v5.1 but after going through the steps as I understand them to be, my 818pro just gets stuck at the Red-Green-Blue bars screen with the following 2 lines of text and it won't go anywhere else.
IPL 1.00
SPL 2.20
And then I read through and found someone posted a link to get IPL to 2.20 which I installed and now the Red-Green-Blue bars screen has the following 2 lines.
IPL 2.20
SPL 2.20
I don't know what I can do next. Does anyone have the utility to flash it back to Dopod 818pro original ROM so I may try to upgrade to Crystal v5.1 from scratch again? What solution is there there to get my phone functioning again.
Urgent. Please please help me. Thanks.
You didn't install HardSPL the right way, otherwise it should say:
SPL 2.G3.4PDA
So, just start all over again! BTW you have to run JumpSPL first before you can install HardSPL. To make things easier HMA4 created a .bat file that takes care of all the steps at once. You will find detailed instruction in the HardSPL thread and the New Upgrade Guide.
What I did was run hma4's .bat file. I don't know what went wrong but now I can't just run that .bat file to install again because I'm stuck at the RGB screen and the .bat execution just says
Code:
No device connected
Would you like to try copying again?
What can I do now? I cannot establish an Activesync connection which I think this JumpSPL thing needs...
Help...
you can download any "STEP1" connect your PDA with the bootloader screen and install it, it should be fine...if you still having issues, go ahead and download my ROM from the below link..its about 90 MB..you should have WinRar installed on your XP, download both files in one directory then right click one of them and select "Extract here" it is a shipped I mate Jamin G4 rom with Arabizer...it will replace the 3 splash screen, the Radio and reformate your PDA , BTW it does not check VID so no issue with any G4 (if you are using a G4 prophet this WILL SOLVE THE ISSUE ), when you are done...start from scratch with that BAT file.
* i assume you know how to flush roms
* This is only for G4
http://cid-61d70bae1a33dbb9.skydrive.live.com/browse.aspx/Share/PDA
havin almost d same prob too..
i think this is not d right room but if anyone can help me,
im lookin for original wm5 818pro rom but cant seem to find it.
the closest one is QTEK rom which can be found in XDA-wiki but the boot screen shows "QTEK" font in it,, but i want it to be "DOPOD"(somethin like the original boot screen)..anyone has link to this pls tell me..thanks
Thanks. I flashed it back to PDAVIET's step 1. Now re-trying HardSPL.
Get an error while trying to run the batch file. Same problem after manually copying files over to device manually and then running the following line copied from within the batch file.
Code:
D:\data\software\wm5\wm6\Update_Package\HardSPL\HardSPL G3>CeRun.exe -b CE:\JumpSPL.exe 0x10000000 \SPL.nb
cerun: failed to execute program (30123)
Help anyone?
Try this link
my solution :-
http://forum.xda-developers.com/showthread.php?t=353547
matthewchng said:
Thanks. I flashed it back to PDAVIET's step 1. Now re-trying HardSPL.
Get an error while trying to run the batch file. Same problem after manually copying files over to device manually and then running the following line copied from within the batch file.
Code:
D:\data\software \wm5\wm6\Update_Package \HardSPL\HardSPL G3>CeRun.exe -b CE:\JumpSPL.exe 0x10000000 \SPL.nb
cerun: failed to execute program (30123)
Help anyone?
Click to expand...
Click to collapse
Thank loads! That IS the solution.
1.Copy jumpspl.exe on your device, at root. Copy 1.10-olipro.nb on your device, at MyDocuments.
2.Run jumpspl.exe on your device. Enter 0x10000000 as address. Select 1.10-olipro.nb in list,
and press and hold "Voice Cammander" and "Camera" button. hold,after the flash work is over.
(sorry for my mistake by hold power button,but i used power button works well)
3.White screen is appear. Now your device is temorary CID-unlocked.
flash the gene spl patched by Olipro.(it's HSPL)
very very thanks to Olipro and pof.
Thanks Olipro for patched SPL.
try this link, so easy for unlock spl.made by ov
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
Now u can flash any rom u want.
it's work well, update my radio rom ok
thanks for sharing bro
all we need is a wm6 rom now
good job! thanks
love u so much
nirvana1981 said:
1.Copy jumpspl.exe on your device, at root. Copy 1.10-olipro.nb on your device, at MyDocuments.
2.Run jumpspl.exe on your device. Enter 0x10000000 as address. Select 1.10-olipro.nb in list, and press and hold "Power" and "Camera" button. hold,after the flash work is over.(now it's USPL)
3.White screen is appear. Now your device is temorary CID-unlocked.
flash the gene spl patched by Olipro.(it's HSPL)
very very thanks to Olipro and pof.
Click to expand...
Click to collapse
Ths,sir!I saw your thread in xbeta.com ,so i come here.Ths a million!
just finished updating my D600 according to your guide. the spl was updated to 1.10.Olip
cheers......
but radio version and startup image remained same as before, no change, plz explain how to update it. Probablely this requires other nbh file?
radio ? you want to update ? ok ,wait i will give you.
no luck
hey mate
i got a error message at the end of using RUU.
it says" image file is corrupted, please check update utility"
any suggestions?
i've also tried the files u posted on pdafans also
both files give the error message
do it step by step .
it says the image file is CORRUPTED!
how can i do it while the file is corrupted
by the way..did u do it on a windows xp or vista
thanks
hi mate
i've also noticed that the RUU version in the readme.txt is different than the RUU version in the zip file.
the RUU version in the txt file is 3.6.3.5
the RUU version in your zip file is 3.12.3.0
sorry . my fault
i've delete the previous posts because ive made some mistakes.
soory nirva1981.
no hard feelings, i 've got my device working now.(didn't do the button thing and 1.10-Olipro together)
sincerely appoligized!
pdafans，keyword ID： rio500
few things getting cleared
1.about the pic thing: it's a IT VERSION which wont have the "CHINA MOBILE" on it
2.the file works ok. i've just tested on my cell
just need to press the camera and power when clicking 1.10 Olipro... DO IT AT ***SAME TIME***!!!
that's all and enjoy
thanks for provinding the file nirvana1981
it works to me, nice move
thanx, thanx again
hello guys.
later tonight I'll be releasing a formal update package for you to use to update your Gene to Hard-SPL.
Bear with me, I need to get hold of a Gene RUU
Olipro said:
hello guys.
later tonight I'll be releasing a formal update package for you to use to update your Gene to Hard-SPL.
Bear with me, I need to get hold of a Gene RUU
Click to expand...
Click to collapse
wow!
thanks a lot
got keep my eyes open tonight
good to hear that
can't wait to try the hspl
thanks Olipro
Hi guys,
I need your help. You'd make me amazingly happy if you could solve my problem.
I have an Orange SPV C100 (french one) and I keep trying to flash wm6.1 (the one Blackdragon_860 has released).
My problem is : I can't flash that rom. The updating process crash at 4% and I get an error saying that the ROM is corrupted.
Do you have any ideas to help me ?
Here are some additional information taken from the Hard-SPL And Soft-Spl walktrough :
1. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
Click to expand...
Click to collapse
I've done that alright
, hold camera and launch spl.lnk -
Click to expand...
Click to collapse
I've done that too.
you`ll see the white screen
Click to expand...
Click to collapse
I have no white screen. Instead a file named JumpSPL.txt is generated... Here is what is inside :
-----------------------
Comandline is: 0x10000000 \SPL.nb
SPL File: \SPL.nb
Jump Address: 0x10000000
kmode is 0
SPL file size: 524288 bytes
3. From the flasher folder run ROMUpdateUtility.exe and follow instructions to flash the Hard-SPL if needed. or you can flash *ANY* oxygen rom
Click to expand...
Click to collapse
I've done that too. I put RUU_Signed.nbh from wm61OxygenUpdate1.rar in the same directory than ROMUpdateUtility.exe
Before the flashing process itself, ROMUpdateUtility.exe tell me I going to flash the image version from 1.7.74.1 to : 1.01
Then I have a rainbow screen which says :
ONBL : 1.07.0000
SPL : 1.07.0000
Oxygen : IU
The flashing process start, then crash and 4%... Saying that image file corrupted.
One last information :
I got the same error with other ROMS. Here the list of what I already tried :
Blackdragon_860's rom, released the 11-05-2008
Standard rom, the one that comes with Soft and Hard SPL (weight about 641Ko)
A Russian rom, taken today from zfree (here)
I didn't tried the chinese one. But as edgeofthestring has eventually the same problem than mine, I not will go for this rom.
I tried to be as complete as possible... I truely need some help.
Plz plz plz hrlp.
Thx
Guigoui
Try first flashing this rom:
http://www.megaupload.com/nl/?d=6B0FDY24
After this hard-spl and than flash any rom you like
Always use rom loader from hard-spl and before flashing rename rom to RUU_Signed.nbh
i also tried to flash the file posted by you but after 4 % the phone reboots and the setup gives me the: " invaliv vendor id " message
Default
ok. may it works when you do it like this:
1. restart your phone
2. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
3. restart phone, don't connect to your PC!
4. open total commander, hold camera button and launch spl.lnk
5. Do you see a white screen? if yes proceed if not it has no
point proceeding, flashing will fail anyway!
6. Now connect your phone to your pc using the usb cable
7. From the flasher folder run ROMUpdateUtility.exe and follow
instructions to flash the Hard-SPL
8. After flashing Hard-Spl, to avoid reflashing, use always use
flasher from hard spl and rename the desired rom to flash to
RUU_signed.nbh
Hope this will finaly work for you!
i have tried it, i have the wm6.1 chinese version rom and the hard spl is not working at all in this rom, i have tried it with total commander and after the white screen appears and i connect the phone to the pc it is nor recognized by the pc...
thx nemphis for helping me... but it just don't work.
Believe me I'm not numb. I can read and use my little brain... I think I tried everything (including throwing my device to the other side of my room). There is something that keep my device from displaying this f*****g white screen.
Just for the record, I repeat, I have a french blocked orange C100...
If someone has got in the same problem and finally sorted it out, plz share how.
Nemphis, thx again but I doubt I will ever have wm6.1... Anyway I give up, so I guess I will never have wm6.1...
By the way, I also tried the rom you advised but as you so rightly said "if not it has no point proceeding, flashing will fail anyway!".
Thx you all...
c u...
by by
Is your phone sim unlocked also?
When reading through these forums there also are people saying you still need this: http://www.imei-check.co.uk/
Or ask your operator for the sim unlock code, they should give it when your phone is more than 1 year old.....
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
guigoui said:
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
Click to expand...
Click to collapse
Was your phone "app unlocked" before begining ? I would assume it is necessary, but won't pretend I'm a guru...
Christophe - Lyon - France
@guigoui :
I had this same, white screen didnt appeared .. but after unlocking using this way: http://rapidshare.com/files/105133496/Unlock_HTC.rar.html you'll see it (after runing SPL.lnk with camera button pressed) all is working !!!
I've WM6.1 !!!
Thanks!
This sounds pretty good vovakk... I'll test your file tonight (because I had no white screen after having my device simunlocked)
I can't to stand waiting until tonight...
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
hey GuiGoui can you upload this file here or Rapidshare please. Megaupload is way tooooo slow. RUU_OxygenWM5_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
thanks
I can't.... 8Mo limited...
guigoui said:
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
Click to expand...
Click to collapse
How did it work............ i ended up lockin my phone it was unlocked before... now no application works... anymore it say this application is not have signed certificates..... PLZ ANY1 HELP I DONT EVEN KNOW HOW TO HARD BOOT THIS HANDSET..... I NEED URGENT HELP PLZZZZZZZZZZZZZ...