Related
Please help me!
I screwed my MDA Vario II. I used HTC universal sim unlocker and I haven’t got radio. I know I was a craze.
No GSM, no cid and no imei. The pda is working good.
I vas very happy when I find this site :
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems.
I made this:
USB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>set 1e1
USB>erase a0040000 c80000
HTCST ÚČŇHTCEUSB>erase a0cc0000 c80000
HTCST ÚČŇHTCEUSB>erase a1940000 640000
HTCST ÚČŇHTCEUSB>set 1e 0
USB>
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Please help me
Please can a expert check this!?
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
- Take the battery out of your TyTN and leave it out several minutes
- Disable USB-connection in Active-Sync
- Reboot your Computer
- Replace the battery and put your TyTN in the bootloader
- Try to load the ROM found here:
ftp://xda:[email protected]/RUU120_172125_Qtek_WWE_R11400_Shipping.exe
- Keep trying till you get just past the erasing part, then you will get an error-message and are asked to reset your device with the stylus
- Reset your phone and put it back in the bootloader mode
- Install any Hermes ROM you like, no matter what CID if you have bootloader 1.04
lacika said:
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Click to expand...
Click to collapse
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Same Problem
I have the same problem
My PDA keeps comming back in the bootloader screen.
When 1 try to update (its a unlockes pda), the upload stops at 1%
Is there a way to erease the PDA ?
Thanks
pimmmm said:
I have the same problem
Click to expand...
Click to collapse
I have the same questions.
Can't do anyithing if you don't attach a USB capture of the process. See this page for instructions: common upgrade problems
smarty77 said:
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
pof said:
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
pof said:
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
Click to expand...
Click to collapse
HI POF!
Thank you four your help.
It is a new captured files.
Please help me. You are a last chance, for my phones.
Lacika
@lacika:
When checking the seclevel (task 32 bootloader command) your phone replies:
Code:
CID: Wait interpreter timeout.
Level=FF
After that when checking the CID with 'info 2' your phone replies:
Code:
HTCS...?\0.?f..|HTCE
This should be something like T-MOB001 if you have a Vario II from UK, so the CID is screwed.
I can see from the output of 'info 3' that you're running bootloader 1.06.
Then you try to flash the 1.18.255.3 ROM from HTC, which has CID "QTEK_001", you won't be able to flash this image in your device with bootloader 1.06, even if the CID was not screwed you will always get an error (you need bootloader 1.04 to bypass CID checking, and you are in 1.06), the error you're getting from bootloader is:
Code:
CID not allow (255)
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
pof said:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04.
Click to expand...
Click to collapse
Err... I forgot that your IMEI is also screewed, probably imei-check unlocker will not work on your Hermes even if you provide them the right IMEI, because it will not be able to read the IMEI from your phone (will get the wait interpreter timeout too...). anyway... it costs 20GBP, give it a try!
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi and thanks!
I’ve got one question. I use imei-check unlocker after I’ll got 1.04 bootloader?
Lacika
I tried that with my device before it got sent to service, I brought imei-check unlocker but as my imei was also corrupt it will not work, so I would not waste GDP 20 if you have corrupt imei.
They will not refund either becuase its your problem the imei is corrupt.
lacika said:
I use imei-check unlocker after I’ll got 1.04 bootloader?
Click to expand...
Click to collapse
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi!
I’ve got a new problem.
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number.
I don’t know how can I flash my bootloader.
Lacika
pof said:
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
Click to expand...
Click to collapse
I had the same problem! Send it to orange assistance.
lacika said:
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number. I don’t know how can I flash my bootloader.
Click to expand...
Click to collapse
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
pof said:
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
Click to expand...
Click to collapse
HI!
I’ve got a last question.
It will a new procedure, program, with I can flashing my bootloader.
Lacika
Dear All,
I've tried to upgrade to ROM Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship
and unluckly cable loosen and I reset the phone.
Since it's in the middle and can't success enter the Windows Mobile,
but the bootloader was updated to 1.06.
Now I can't flash any ROM either
HER_DopodAsia_1237074_1060010_WWE_SHIP or the new one.
The tools on "imei check" even can't recognize my phone.
Any one can help me on this issue, please?
Thanks in advance.
Try the steps here, let us know the results:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
If you don't fix it with the proposed solutions attach USB Monitor capture in text format as explained in the bootom of the page.
I have the same issue, and sent it to service, and now I have the phone back and they could not fix it, so got no radio or imei number, so none of the FAQ will work for me.
So I have an expensive paper weight.
Hi,
ME TOO!!
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
I have also tried imei without any joy.
the PDA part of my M3100 still works but the phone is dead. I have been told that if you can get the latest radio installed then you satnd a chance of the phone part working.
We need a hack to get bootloader 1.4 back on the phones.
Please help.
Thanks
My one now is a photo frame which one show "HTC" or "Windows Mobile",
at least your one is a PDA.
There are nothing in "info 2" and so nothing can be flash into it.
Is it possible to have something written CID and IMEI to phone in mtty
and let the flash rom success?
i am in the same situation like yhlee. Pof, i have reply your pm and ready to upload the result file to FTP. where should i upload to?
Thanks
oh i forgot to say, mine is even worst. as soon as i turn on the unit. it will go right into bootloader without press any button.
The USB Log is too large (around 2MB)
and can't upload, any suggestion?
Thanks.
rnc1688 said:
oh i forgot to say, mine is even worst. as soon as i turn on the unit. it will go right into bootloader without press any button.
Click to expand...
Click to collapse
This can be fixed by bootloader commands 'set 14 0' and 'task 8', will reboot your device and boot into OS again (but no GSM yet!)
yhlee said:
The USB Log is too large (around 2MB)
and can't upload, any suggestion?
Click to expand...
Click to collapse
Upload it to xda-developers ftp:
ftp://xdaupload:[email protected]/Uploads/Hermes/
USER: xdaupload
PASS: xda
POF, file have been uploaded, file name= rnc1688
Thanks
'set 14 0' and 'task 8' didn't work
@rnc1688: It starts the flashing process, but you get a "CID not allow (255)" error because your CID is corrupted and you are in bootloader 1.06.
Is not booting WM5 after "set 14 0" in mtty.exe? If it's not booting WM5 you'll not be able to flash bootloader 1.04 and bypass CID checking.
so i guess my unit is bricked now.
I've upload the file which named yhlee.txt.
However, I'm going to send the unit for service.
Hope they can fix.
Any way to make it show the bootloader screen on start-up
everytime?
"set 14 1" doesn't work after push the RESET button.
Thanks.
@yhlee: U're getting exactly the same error as rnc1688. Device in bootloader 1.06 which has corrupted CID, however you say you can go into OS, so it would be possible for you to downgrade the bootloader so it does not enforce CID checking.
yhlee said:
Any way to make it show the bootloader screen on start-up everytime? "set 14 1" doesn't work after push the RESET button.
Click to expand...
Click to collapse
Try "set 1e 1" and then "set 14 1", you'll boot stright into bootloader.
@rnc1688: If you want to go WM5 try this:
"set 1e 1" and then "set 14 0", you should be able to boot stright into OS.
no luck either
grrr!!!... command "set 14 [0|1]" is working fine in 1.04 here to switch boot into WM5 or boot in bootloader mode... probably different in 1.06??? I don't have a 1.06 now to test
Mine one is just showing "Windows Mobile" but stuck there,
but seems rnc1688 one is a PDA but my one is nothing.
I've sent to distributor for service.
Thanks you pof.
yhlee said:
I've sent to distributor for service.
Click to expand...
Click to collapse
Let me know when they fix it... i'm curious about if they will fix it with 1.06 or they will downgrade to 1.04 first.
I got a correct message back from the service company, and they will not fix a bootloader 1.06 unless the original rom has been release with it, I was told that is HTC policy on this.
here is what I've done and what happened:
my ROM was HTC 1.18.255.3 07/22/06 with bootloader 1.04 then I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
after "SUCCESS!" message from "HERM_Unlock_v2a.exe", I connected my device via USB to PC and started to upgrade to Cingular 1.31.502.1 08/30/06 with aku 2.6 and bootloader 1.06 but when I get the "ID ERROR",without disconnecting the USB, I switched back to ugrading to previous ROM HTC 1.18.255.3 and the Processe started with no problem untill 98%, then suddenly upgading interrupted a message came saying connection error or somting like that!
since then my device is stuck on windows mobile screen and I've tested solutions in the "Hermes_Upgrade Problems" page and tried using the "Hermes SD Card flashing" method, But It seems impossible to flash my phone agian.
Help me PLEASE,HELP
someone help me please!
POF can't you help me please
I think Pof is away until 3rd december, I have the similiar problems with my second hermes, if you have then use mtty to see if you have an corrupted cid using info 2.
Do you have the original rom to go back on if so that will fix your problem.
I've used mtty to send some commands to my device and it answers to some of them but It just stop responding when I type "info 2" or "info 3".
and i tried this in mtty:
"
USB>checkimage
IPL CRC checksum = 0x9FCC6BEB
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = Total Block= 1024
dwBlockIndex= 1024
Address Error1!!!
Get checksum ERROR!!!
0x0
Radio Image CRC checksum =
"
again It stop responding
also tried upgrading, no matter which ROM I try, it just can't connect to device.
and thanx for your relpy.
hi, since there is NO htc service center available around me I have to do something about it myself but my phone is still dead and I'm using a nokia 1101. PLEASE someone help me, pof are you back? can you help me?
I've tried all in this page:
"http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems"
and this one too:
"http://forum.xda-developers.com/showthread.php?t=280733"
and tested qtek 2020 rom but no use.
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
can anyone help me?
mht220 said:
I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
Click to expand...
Click to collapse
Wrong, you also need a patched radio to CID unlock. Running only the exe file without the patched radio has no effect on the unit.
mht220 said:
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
Click to expand...
Click to collapse
Please attach usb monitor capture when trying to flash a ROM and a radio ROM. Otherwise can't help you.
here is exported files from usb-monitor:
and tanx for your reply
uuh... there must be something really wrong with it, no response to bootloader commands. If no sd card flashing is possible, I would suggest you to send it to service centre too.
pof said:
...I would suggest you to send it to service centre too.
Click to expand...
Click to collapse
It's a difficult option for me, as I should send it to a foreign country to service center,so are you sure there is no way like erasing somewhere using mtty?
pof said:
... no response to bootloader commands...
Click to expand...
Click to collapse
but it respond to some of them in mtty.exe e.g. "erase", "set" and some other.
pof said:
...If no sd card flashing is possible...
Click to expand...
Click to collapse
no it would stuck in "checking..." forever
tanx
HI,
I have same exactly problem on my spv m3100: since sept06 I've tried every kind of Unlock software,upgrade ROM and method found in xda..In mtty bootloader (spl 1.04) respond at every command but not "info 2","info 3" and "task 32".Sd card method works but if you try to upgrade other ROM,in your screen "loading..." and then "checking..." hangs on because the ROM upgrade must to match CID (I suppose..).I'll wait the next ROM Upgrade and ORANGE won't release it until gen07..
warrio said:
I'll wait the next ROM Upgrade and ORANGE won't release it until gen07.
Click to expand...
Click to collapse
it seems your problem is like mine if so, I don't think ANY normal upgrade can solve your prolem 'cause it can't connect to it.
so don't wait and send your device to service center, if you can.
I'm in your same conditions:there's no repair center here so I have to wait Orange who release a upgrade Rom (I hope asap..).
Hello all,
I got a friend of mine who came to me with a device-password locked Hermes, which password he cannot recall (actually his girlfriend...). I said I would be willing to give him a hand to unbrick the device. The problem is that I cannot install any ROM on the device, coz I got an error connection right after the screen goes white and the percentage count should normally start.
So I put the Herm in Bootloader (spl-1.06) and try to flash the OliPro Bootloader. The procedure goes correctly until the step where the upgrade itself should begin, counting from 0%... here, I got:
ERROR [262]: Update error: communication error.
I also tried to flash a ROM directly, but since my Bootloader is 1.06, I didn't find a CID match ROM, so it also failed. The Herm is now not bricked, but it stays at the password input screen, so cannot enter windows properly.
Any help on this?
Thanks,
Ionutz
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
agovinoveritas said:
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
Click to expand...
Click to collapse
yes, i grih you,and normally i wouldnt even try to do such thing, if it hadnt been for a friend of mine which i know.
besides i would like to learn more stuff about my Herm and this is one thing I havent seen discussed here, although i keep reading xda forums for such info.
just found the solution: i flashed another ROM with same CID since my BL was 1.06, but with BL 1.04. After that, I managed to flash any other ROM and automatically upgrade the SPL to 1.10 or 2.10 Oli accordingly.
If any of you interested and dont get the short explanation, PM me.
cheers,
Io, owner of 2 kicking TyTn's
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
mrvanx said:
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
Click to expand...
Click to collapse
I know the details about BL 1.04 vs 1.06, thats why I flashed a BL 1.04 ROM, but with the same CID QTEK_001, or smth.
I have to admit though that I never ever thought about doing a simple hard-reset. I guess it would have been to easy, I jumped to more complicate scenarios. Thanks for the help anyway, i gotta learn that.
Thanks mrvanx, glad I read down the whole thread to the part about a simple hard reset working. I lent my 8525 to a friend, thinking he might be interested in buying it, then he didn't have the money, and after I listed it on ebay today, I charged it up to flash to ATT stock, found it password locked, called my friend a few times just getting his voicemail, so tried flashing, and it said the Hermes wasn't connected to the PC...
I figured there would be a solution here at XDA..and POOF, like magic here it is!
So yes, all I had to do was a hard reset, tested and it works, and it was simple, so thanks again mrvanx, although this thread is very old, glad I found it LOL!
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
ROM
apd said:
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
Click to expand...
Click to collapse
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
EricBr said:
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
Click to expand...
Click to collapse
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
mackaby007 said:
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
Click to expand...
Click to collapse
Hi Mackaby, thanks for the answer.
That was the first ROM I tried to flash. Gave me error message "wrong vendor, check your update software"
Now I only get bootloader when I start my device. I have(had) a Norwegian ROM so I guess the CID does not match. I wish I unlocked my device before trying the WM6 ROM but......
Now I am stuck : Cannot boot / install my original ROM or install any.
My hope is that I can either unlock my CID in Bootloader or installing the original ROM again with a hard reset. To bad a hard reset only sends me to bootloader.
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hey Pof,
Welcome to the Athena forum. Are you planning on being here or you were just passing by...
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hi Pof ! Thanks for the answer and clarification. Will try today !
Greetings, Eric
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Did it. Same result : Bootloader shows up after "task 8"
bootloader says :
athe100
ipl-v1.00
Athe100
SPL-v1.07.0000
red (raster)
green (raster)
blue (raster)
"Serial" when not USB connected, "USB" when connected in white field.
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
lpsi2000 said:
Are you planning on being here or you were just passing by...
Click to expand...
Click to collapse
Just passing by, sorry... i don't have athena
EricBr said:
Did it. Same result : Bootloader shows up after "task 8"
[...]
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
Click to expand...
Click to collapse
bummer..
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
hdubli said:
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
Click to expand...
Click to collapse
Hi Hdubli,
Thanks for the answer.
Bonus pack ? do you mean the CD that followed my x7500 ? I can check but don't think there are any ROM Flash application on that.
Sorry if I didn't understand your message correct
Greetings, Eric
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
hdubli said:
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
Click to expand...
Click to collapse
Ok, understand. We don't have anything called Bonuspack here with hardware stuff and ROM software.
This was the output from the mtty command :
Cmd>info 2
HTCSHTC__H10 ÅPýHTCE
Cmd>info 3
HTCSATHE100001.07.0000 ßؽôHTCE
Anything special with this ?
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
EricBr said:
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
Click to expand...
Click to collapse
That would corrupt the signatures, and it won't flash with an unmodified bootloader.
bootloader screen freeze after turning htc x7500 off
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
Thanks EricBr or anyone who can help me,
I have a similar problem, but in my case I didn't do anything to deserve it... I just turned off my new and provider unlocked x7500 after playing with it all day (just installed skype for mobile and customized some settings, tried the programs, etc.), and when I tried to turn it on again, it just froze in the bootloader screen... Nothing works, I tried soft and hard resets, don't know what else to do?
I've been reading al your posts everywhere and tried a few things without succes, when I conect my x7500 to my pc, it doesn't connect to activesync or anything. I guess I would do better if there would be someone who can create a reply that would clearly guide me on what to do and what files (with links) to download. I simply don't know what happened! since I didn't do anything especial to deserve this from my x7500 which I was falling in love with, after only a few hours of just getting to know it.
I'm new to xda's so please lay it down easy on me... Already had removed the sim and the miniSD I had installed on it... still nothing happens.