Ok, so like, ever since I got this extended battery, my life's been a WHOLE lot easier. However, it's a pain carrying it in my pockets, and cases for my phone are pretty much non-existant. I'm using a horrendous looking Sidekick 2 case, and while it gets the job done, it's quite the eyesore. I went to the local mall, and they actually had a case, but it had a magnet holding it together, and that actually damaged my last phone (i-mate Jam). I'd appreciate any help anyone can give me, it would be much appreciated. Leather cases prefered, though I'm open to ANY suggestions, believe me.
Thanks,
Mark
aNiMeMaN14 said:
Ok, so like, ever since I got this extended battery, my life's been a WHOLE lot easier. However, it's a pain carrying it in my pockets, and cases for my phone are pretty much non-existant. I'm using a horrendous looking Sidekick 2 case, and while it gets the job done, it's quite the eyesore. I went to the local mall, and they actually had a case, but it had a magnet holding it together, and that actually damaged my last phone (i-mate Jam). I'd appreciate any help anyone can give me, it would be much appreciated. Leather cases prefered, though I'm open to ANY suggestions, believe me.
Thanks,
Mark
Click to expand...
Click to collapse
Where did you find the extended battery?
ebay?
http://search.ebay.com/search/searc...maxRecordsPerPage=50&SortProperty=MetaEndSort
Extended Battery Case
I am wondering the same thing. I swear I hang up on people 5 times per day. They always say, "What the heck is wrong with your phone?" I tell them there's nothing wrong with my phone but it's hard not to hang up on them all the time because I don't have an adequate case for the thing with an extended battery. Back when I had my Treo 600, I always used a hard belt clip case, never had an trouble with unwanted hangups. Anyone find anything decent?
shiggins9 said:
I am wondering the same thing. I swear I hang up on people 5 times per day. They always say, "What the heck is wrong with your phone?" I tell them there's nothing wrong with my phone but it's hard not to hang up on them all the time because I don't have an adequate case for the thing with an extended battery. Back when I had my Treo 600, I always used a hard belt clip case, never had an trouble with unwanted hangups. Anyone find anything decent?
Click to expand...
Click to collapse
It's funny, because I've had this case for about a year, but never thought of using it. I gave it to my girlfriend for her Wizard, and never asked for it back (though that's definitely changed). Give this one a shot:
http://cgi.ebay.com/for-CINGULAR-81...3QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
Very sleek look, fits the phone with the extended battery comfortably, durable, and no magnets that can potentially damage your phone. You can snatch it for about $10 shipped on eBay. Hope this helps.
You know I have had my phone in a magnetic case for over a year and have not experienced any problems with it damaging anything...I too have been searching for a case for my extended battery 8125, been to tons of sites on the web and so far the one I got from the mall works the best.
Now EBAY had a couple (magnetic flap) that was PDA style or as some call it flip style where there is no sliding your phone in and out...ebay item number 150123840685...it just didn't have the clip I like.
I just looked and the one I am using is the SIDEKICKII case...after a few weeks of use the case streched or loosened up and I don't have near the hang ups I had in the beginning.
Related
What cases are you chaps investing in to protect your Heros?
Have not seen any yet. Not sure if I should get one or not I did not get one for the Diamond and that is in great nick
New mobiles make me nervous...........
If you have the white... with Teflon coating and a good screen protector I would imagine that a case isn't necessary.
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Been there....done that!
cbailey said:
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Click to expand...
Click to collapse
i will be keeping a firm grip on my hero....
my old diamond was always trying to jump out of my hand
Mine will reside in my pocket, next to my homekeys, some coins and lint.
I like to put mine in a belt case while at work as I'm always running about. Apart from that a good screen protector normally does the trick
Soon available at www.noreve.com (high quality cases)
I'v tried all the high street stores, and nothing, 99% of mobile shops don't even know what the HTC hero is and 95% of them only sell iPhone crap and nothing else, the worlds getting taken over by sheeps with iPhones
Original HTC Pouch
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
So, don't buy this if you have a white Hero. No problem whit a black one, I guess
schauol1 said:
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
Click to expand...
Click to collapse
I got this for free (http://www.handtec.co.uk) and so far no smudges. I tried rubbing some white plastic (NOT my Hero) on the inner leather lining, and with considerable effort I can rub off some black colour. After cleaning the white plastic piece it was bright white again, maybe you want to give it a try.
The case is a bit tight, though. On the other side, the phone can't fall out even if the magnetic latch opens accidentally ;-)
Overall, I'd give it 7/10 (good but not great).
Foof case for my Hero
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
I've got this pouch:
http://www.krusellcases.com/uk/p_krusell_product.aspx?i=179446
Just what I wanted so far, it protects the phone and is rather slim. I didn't want more bulk in my pants pocket. The Hero fits quite ok, maybe it's a wee bit too wide, but not much.
Edit:
I'm gonna return the Pouch to the shop. The inner part (as well as the exterior) is made of a leather-like matherial in black color. The first days it was ok, but it has started to leave black stains on my white Hero. I was able to remove them really easily but I'm not happy anymore. I'll go check if its a defect in my pouch or all these models leave stains. I don't recommend it anymore.
tallen3 said:
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
Click to expand...
Click to collapse
That foofcase looks great..ordered two
I've got this pouch
http://www.mp3shop.nl/product/72567/50854/puro-nabuk-case-red-ipod-touch-iphone.html
The perfect fit for my Hero, and it is slim.
I bought my on expert in Sweden
batteries?
anyone find any good deals on replacement batteries that hold more power?
sprinkles said:
anyone find any good deals on replacement batteries that hold more power?
Click to expand...
Click to collapse
Why would you post this here, rather than the thread about batteries?
I do not have a Hero yet, but I do plan on getting on when it is released in the US. Anyway...
Have you guys ever heard of SwitchEasy? They make cases for the iPhone and they are my favorite case maker, and I was planning to get a case from them as I was originally planning to buy an iPhone about a year ago. However, I did buy one for my girlfriend about a week ago and she LOVES it. I waited on buying that iPhone and out came the Hero.
I recently sent them an email to see if they would ever consider ever making a phone case for the Hero. Unfortunately, that was about 2 days ago and have not had a reply...
Perhaps if we can get enough people to send them emails so that they can realize how many people have Heros (and provided you like their cases ) we can get them to manufacture some cases and add a bit more selection to the slim pickings so far.
I am not trying to promote their products or site in any way, but if you like the style of their cases like I do, I would definitely like to see a case from them for the Hero. Was just wondering if we can do a group effort here.
If this post violates any rules that this forum has, please delete or mod it. Thank you!
I'm using the HTC belt holster that I got for my Diamond. It's a nice tight secure fit. The Diamond used to wobble around in it.
Anyone find any cases yet??
What do you think about the head phones??
Ive been using a Seidio belt pouch that I bought for my Touch Pro 2 a year ago and it fits it perfectly. I also just bought the REALOOK screen protector from amazon but im expecting to get that within a few days. Ill let you know if its worth getting or not, but the general consensus with that brand on other phones is its invisible, perfect fit, maintains the smooth glass feel of the screen.
Thanks Man!!
i have been searching for weeks.. to no avail.. i mean.. i've found a few that MAY work.. but my phone is on the way now .. soooo.. long story short.. best case i could find.. for myself was .. where other than the AT&T accessories page.. right where i should have started here s a link...or not.. thank you spammers.. anyway.. should be easy enough to find
I placed my order last night for the Invisible Shield maximum protection package. It ended up costing about 27 bucks shipped, but I've heard nothing but good things about this setup. I'll let you all know when it comes in.
OLD School and New School
I've actually been using the case from my 8125 for my past three phones (Tilt, Tilt2, and now Surround). It's a little tight on the long axis, but that's not the end of the world. I had wanted a new one; but the only one I found was $35 and I'm not willing to shell out that kind of money.
Regarding headphones, this is the first phone where I get over 95% reliability on my Bluetooth S9s, and given how uncomfortable the stock ones are I'm willing to live with a couple of skips.
Hard Case
Hi guys...
I bought this Hard Case on ebay. It feel nice on the phone.
Invisashield
Just got the surround yesterday and had the girl at Best Buy put the invisashield on. I don't normally like screen protectors as it takes away the sensitivity, but I don't even notice that this one is on. It gets a high rating in my book, not to mention that if anything goes wrong with it, it's replaced.
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
Ok, so this is my first thread on these forums. If I'm breaking the rules or posting incorrectly, etc. Please let me know how to fix it.
I went ahead and got all the measurements off of various sites before I attempted this. I lost the paper I wrote the dimensions on. But this does work. I used an exacto knife, old pair of wire cutters and a file. I wish I had a dremel to do this, It would've been a lot cleaner and more exact.
I ordered an OEM Thunderbolt Extended Battery, Otterbox Defender Case, and a Zagg Screen Protector. I've been using this setup for a month now and am very pleased.
I spent $65 total on amazon.com and zagg.com for everything.
I first laid the battery in the battery cover and scored the edges. I pushed through it on one corner than began to cut. I filed down the edges. I then laid the cover in the Otterbox case and scored the outline. Then I ran the exacto back and forth for quite a while until I got through on one edge, than began to cut.
Here are my results. I know the images aren't the best quality. I haven't bought a new camera since before I've had my first android.
I peeled a bit of the padding out of the back of the Otterbox case and put it on the battery just to see how much it would push out the silicon cover, not much.
Now I am going to double-side tape the left over rectangle of the battery cover to the battery and get some weather stripping and place it on top of that.
The Zagg and the Otterbox mate well at first, eventually they begin to separate around the edges, I used the spray between them that came with the Zagg shield. The Zagg stays in place though. I haven't noticed any dust or debris since it's started. So far over this month they've stayed together in the center. I don't mind it as I am pretty hard on my phones physically and usage wise. It's hard to tell when the screen is actually on.
If you have any questions that I haven't answered, just let me know.
Thanks for looking.
How well has this been working for you? I have been planning on doing the same thing.
Sent from my rooted slightly modified Rezound using XDA
That's really, really cool. I approve, great job!
I did something similar with my trident kraken case. I was going to get this otterbox but I didn't because trident has a better selection of colors and so far its been great.
Sent from my ADR6425LVW using xda premium
I saw on htcpedia that you can actually use the Defender case without the back plastic piece. Just wrap the silicone outer cover around the phone with just the front plastic on. Haven't tried it but their video shows that it seems to fit perfect.
Sent from my DROID3 using Tapatalk 2
The problem with doing that is the phone will not fit in the holster screen out and the volume buttons are way to sensitive. If you cut the otter box back and the standard battery door everything fits nearly prefect.
Sent from my rooted slightly modified Rezound using XDA
I believe that also voids your (lifetime) warranty. Commuter cases are better anyway, but that's just me..
*Sent...*
You should read the fine print. Its hardly a lifetime warranty. In fact is only for a year. And if you have a flaw within that year, they will only replace it once. Besides, how many things can really go wrong with a phone case? Once it breaks, your probably ready for a different one anyway.
Sent from my rooted slightly modified Rezound using XDA
Just did this last night....and I agree, would be much easier with a dremel. I'm going to borrow a friends to smooth the cuts, but so far, it works like a champ. I used an OEM Rezound extended battery though
Sent from my WabiSabiGeek'd out Transformer Prime using the Interweb
Thanks for the pics and info for this MOD I did it a few days ago and I love it you can't even tell that I added the extended battery. I picked up a battery from Verizon website on sale for 29.99 plus my 18% off. Worked out great.
Love the mod. I'm gonna do it my next day off. How solid does it feel? Does anything feel lose on the back? Also do you think this would work with the mugen 4000 mah battery?
sumredhed567 said:
Love the mod. I'm gonna do it my next day off. How solid does it feel? Does anything feel lose on the back? Also do you think this would work with the mugen 4000 mah battery?
Click to expand...
Click to collapse
Looks and fell you can't even tell you did the mod. I did nice clean cuts the battery cover was so close on my cuts a had to go back with sand paper as I was not getting cell service do to the antenna no connected. So take your time the OEM batt cover already has the outline of the battery so that cut is very easy. after that just lay the back cover in the outerbox and mark and cut you will be very happy with it.
I ended up doing it yesterday and I'm in love
. You really can't tell it's there. The only thing I'm wondering is the dimensions of the 4000 mah battery because I'm wondering if it will work with this mod. Can anyone chime in? Is it bigger then the OEM extended battery?
sumredhed567 said:
I ended up doing it yesterday and I'm in love
. You really can't tell it's there. The only thing I'm wondering is the dimensions of the 4000 mah battery because I'm wondering if it will work with this mod. Can anyone chime in? Is it bigger then the OEM extended battery?
Click to expand...
Click to collapse
Well the 4000 mah battery has to be the same around so even if it is thicker I think the outerbox rubber will still give in and pull over it just fine.
Today I did the same case mods.
I purchased a used standard rezound back piece for $5 + $4 for shipping. This way if I screw up I only lose the used back piece.
Well I did a good tight job on the back piece. It's like HTC already put cutting lines inside the back piece to make it easier for us. I used a dremel tool with cutoff wheel. Also used a file to smooth it out.
On the defender box I cut the rectangle a little too low and had to lengthen the hole. But I don't think it matters that the hole is 1/8 inch larger than necessary.
I am generally pleased, but I suspect this leaves the phone more vulnerable to water damage if it becomes submerged in liquid.
Sorry to everyone for not checking on this thread in such a long time. This has had a very solid feel. I love the rezound. Also, as for the 4000mah battery. I looked at the youtube video about it. It is a tad thicker than the OEM extended battery. But I see no reason why it wouldn't fit. The silicon will stretch. I'm actually looking into getting the 4500mah battery from mugen for the thunderbolt to see if that will work. I don't mind the added bulk, obviously haha. I also need to clean my case up with my dremel. I've just been lazy. I can take pics of this phone later to show how it's held up. The only other thing is it is hard to fit the phone in screen out in the belt clip if you want to use it as a stand. With any mugen, imho, it will not fit that way at all. But regular face in, no battery will affect that.
I'd be careful about handing all that cash to mugen. Their batteries are under 80 percent of the claims.
http://batteryboss.org/
slydweis said:
Sorry to everyone for not checking on this thread in such a long time. This has had a very solid feel. I love the rezound. Also, as for the 4000mah battery. I looked at the youtube video about it. It is a tad thicker than the OEM extended battery. But I see no reason why it wouldn't fit. The silicon will stretch. I'm actually looking into getting the 4500mah battery from mugen for the thunderbolt to see if that will work. I don't mind the added bulk, obviously haha. I also need to clean my case up with my dremel. I've just been lazy. I can take pics of this phone later to show how it's held up. The only other thing is it is hard to fit the phone in screen out in the belt clip if you want to use it as a stand. With any mugen, imho, it will not fit that way at all. But regular face in, no battery will affect that.
Click to expand...
Click to collapse
The OEM extended battery is pretty good and I got mine for $25. That's a pretty good deal.
HowardZ said:
I'd be careful about handing all that cash to mugen. Their batteries are under 80 percent of the claims.
http://batteryboss.org/
Click to expand...
Click to collapse
Wow, that is very interesting. If OEM is the closest to what they state, I may just solder my other incredible 2 batteries together haha.
I've been making little videos for the past couple of days since I bought so much little stuff. I'm exhausted. Basically went to a Verizon store, slapped my DNA down on the mat and it started charging. For something to work so well out of the box, I was a little surprised. Usually just about everything requires some kind of setting modification.
What I was really looking for was a case. I hated the fact that they only had a pink and blue TPU case. The Otterbox did show up online, but neither of the two stores I visited had them. For S&G, I went ahead and asked for the TPU case to try it on. It fits pretty snug, and I have other videos on that. What I really wanted to know is if the DNA would charge with the case on. While he was grabbing the case I hovered the phone over the mat. It charged. Good sign there...
After putting the TPU case on, I tested it out and everything worked. As I went home, I was thinking that the case would probably make the charging really slow. By the end of Black Friday my phone was pretty much dead. I got home, put it on the pad, and it does charge alright. I'll try to run the phone down twice in the future to compare the factory charger with the mat.
With the Otterbox Defender Case
EDIT: Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
With the Otterbox Commuter Case
Removal of Speaker from LG WCP-700
Many people don't like the speaker because it will cycle once charged and beep over and over again. Other solution would be to get use to it or take it off the charger once it is charged.
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Also works perfectly with the Verizon Shell/Holster combo. I keep the shell on for the built-in kickstand and it charges without issues.
thenickisme said:
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Click to expand...
Click to collapse
No problem. I'm going to have to look at the standards now. I didn't think I'd enjoy this feature as much as I do. That was probably because I assumed the phone had to be naked.
Sent from my HTC6435LVW using Tapatalk 2
DNA with Otterbox
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Geofiveo said:
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Click to expand...
Click to collapse
If the Commuter was available I would have ordered it today... I did go ahead and get the Defender. Definitely need to log charge times between all the scenarios.
Bump. Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
jonah1234 said:
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
Click to expand...
Click to collapse
No problem buddy. Just has to encode now (the video). I'm glad you asked me to do it.
*update OP* w/ video of speaker removal
Defender
The otterbox defender case makes wireless charging almost not worth it but i can attest that it does work with the Lg pad from verizon.
Kind of depends on what you're goal is here. I think the wireless charger was designed for longer use from the beginning. Times when you ordinarily wouldn't go through the hassle of putting a phone on the charger, you can.