I have a suer that has traveled from the US to Germany and his phonw iwll not auto negociate the 900mhz GSM network. Does anyone know how to change from automatic to manual band settings?
Related
hey,
Sorry new to this,
i recently bought a touch 3g, and the guy said it would work on my network. the phone supports by the spec sheet ;
HSDPA/WCDMA:
900/2100 MHz
Up to 384 kbps up-link and 7.2 Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
the frequency i need is
850/2100 mhz wcdma
Is there a way to flash the rom or to run this?
Cheers
Well, it should work indeed. If you go to the Settings tab, "click" on All Settings, Personal, then open the "Phone" icon, you should see a Band tab which should let you select your network type: GSM, WCDMA or Auto. If it's not on Auto, then set it to Auto. Do the same for the GSM/UMTS band drop-menu.
hey thanks,
however there is a network tab which has "find network"
which comes back with cannot find network.
then a network selection tab that only has manual or automatic. manual select network gives me the networks worldwide which should work so i select 50501 Australia+505 nextG+01 it searches and comes up with can't find settings for network contact network operator.
Ive rang telstra and to no suprise they were less than knowledgeable on the situation than i am.
before rooting my phone under network mode I used to have the option to select WCDMA/HSDPA but after rooting it that option has changed to GSM/WCDMA, how to I fix this?
Unroot........
Naaaah, i have always had gsm/wcdma option, but phone is working in hsdpa mode according to speedtest.net. So it seems to be only a name difference.
i have the same problom my phone has no 3g or H signel anymore
try to enter the apn settings manually.
in the UK we always had GSM/WCDMA even if the phone was running in HSDPA, and since most of you root onto the generic UK firmware that is your answer.
Gsm/hspa is probably a operator specific branding. But its total nonsense , gsm/wcdma is the correct wording as wcdma is umts and hspa is a software specific upgrade which is not available on all towers in most networks.
But in order to use it at all WCDMA (umts) needs to be enabled
Sent from my X10i using XDA App
having messed up my phone yesterday installing themes/playing....i had to reflash, so after it all finnish i now get H signels fine and 3g in the house ..and yes i have rerooted.
I have a one converted to GPE and where I live I get great LTE coverage. However at work its weak and my one is constantly switching between LTE and hspa.
How would I set my phone to only connect to hspa while at work to avoid the constant switching? In setting under network mode there is only options for LTE 3g and 2g.
Does 3g include hspa and if not I've read about a code to enter from dialpad that allows u to set netowkr. I need a method that will allow me to easily switch it depending on where I am.
If anyone knows how to do this any help would be great.
Honor 9N is a latest budget phone from Huawei Honor.
For Indian customers, it comes with network settings as 4 options ( LTE/WCDMA/GSM Auto), (WCDMA, GSM Auto), (WCDMA only) and (GSM only).
While the network signal is weak we don't get LTE band as it jumps down to the lower signal WCDMA or GSM.
Here I will explain how to enable LTE only option in settings.
Steps:
Download the app : Settings database editor
Scroll down and look for "hw_networkmode_preference" and change its value from "9,3,2,1" to "9,3,2,1,11". save it.
Then restart your device.
Now the LTE only option will be available in Settings > Mobile Network.
Remember one thing : You will no longer receive or make a call when you are in LTE only signal. It's because only Jio supports 4G calls (VoLTE).
If you are using any other Network Service like Vodafone In, Idea... Etc, use LTE only option only when it's needed and change into ( LTE/WCDMA/GSM Auto) later to receive calls.
Thanks.:victory:
Screen shot from my Honor 9N.
Values : 9,3,2,1,11,12
Gives :
LTE/WCDMA/GSM Auto
WCDMA/GSM Auto
WCDMA Only
GSM Only
LTE Only
LTE/WCDMA Auto
Changing LTE bands
I bought Honor 9N in India. To my disappointment, I cannot use it with T-Mobile in the U.S. Is there any way to change it? (Full confession: My knowledge of software/hardware is pretty poor)
Ahammed Danish said:
Honor 9N is a latest budget phone from Huawei Honor.
For Indian customers, it comes with network settings as 4 options ( LTE/WCDMA/GSM Auto), (WCDMA, GSM Auto), (WCDMA only) and (GSM only).
While the network signal is weak we don't get LTE band as it jumps down to the lower signal WCDMA or GSM.
Here I will explain how to enable LTE only option in settings.
Steps:
Download the app : Settings database editor
Scroll down and look for "hw_networkmode_preference" and change its value from "9,3,2,1" to "9,3,2,1,11". save it.
Then restart your device.
Now the LTE only option will be available in Settings > Mobile Network.
Remember one thing : You will no longer receive or make a call when you are in LTE only signal. It's because only Jio supports 4G calls (VoLTE).
If you are using any other Network Service like Vodafone In, Idea... Etc, use LTE only option only when it's needed and change into ( LTE/WCDMA/GSM Auto) later to receive calls.
Thanks.:victory:
Click to expand...
Click to collapse
You need to install this app for FREE
at Google Play
https://play.google.com/store/apps/details?id=com.teknokia.force4glteonly
pro version : https://play.google.com/store/apps/details?id=com.teknokia.force4glteonlypro
galaxy store: https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonly
pro version : https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonlypro
Hi guys, just a quick question here. My LTE (4g) is hit and miss so I currently have it set to WCDMA preferred/GSM.
Is there such an option that can give me WCDMA preferred/LTE? (So that my phone can automatically switch to LTE in areas where's its stronger than WCDMA)
If I have it on default LTE preferred it will only switch to WCDMA when LTE is non existant which is useless. I just want it to switch to what ever has the highest signal.
Cheers ?