AFTER FLASH IPL/SPL MY DEVICE IS BOOT IPL 3.08.1, SPL 2.18.0001 AND AFTER RESTART IS DEAD.
HOW TO FLASH BACK IPL/SPL TO 2.18.0001?
PLEASE HELP!
According to your spl, you have a G4 device. What rom did you flash?
So you are saying that the phone does NOT turn no now and all you see is a black screen when you start it?
The phone not turn on , totaly dead!
What can i do to alive again?
My phone is G4 but i flash ipl whit G3 flash and after reboot is dead.
If you flash a G4 phone with a ROM that contains IPL/GPL (as you did), you will brick your phone. Sorry, there isn't anything you can do to revive it. You can try calling your provider or whoever sold you the phone, but chances are slim as you've probably violated the warranty.
Insurance
I knew from your first post that it was bricked (became a brick) meaning it is no longer functional. The only way you can get pass this is by getting a new one if you have insurance that has accidental coverage as this was an accident.
So you knew you were flashing a G3 before you did?
hy anyone have solution for this problem?
fachry said:
hy anyone have solution for this problem?
Click to expand...
Click to collapse
There is no solution for this, it is bricked... sorry
are you sure that???
i have same problem
do we replace the flash???
tvpham said:
are you sure that???
i have same problem
do we replace the flash???
Click to expand...
Click to collapse
i'm revive with JTAG, but when upgrading software, i flash wrong Wizard G3 ipl and spl, now i have tri color boot loader, When flashing Original Firmware, it says vendor id wrong Stupid flasher. noID flasher stuck 80%
Related
Wow, what an awesome night this has been. Busted out my used MDA that I paid $180 for, didn't register in back of my head as I saw it boot with IPL/SPL 2.260001 even though I read that meant its a G4. Tried to downgrade it to button 1.05, ROM said wouldent work with my device, another clue that fell on dead ears as I went straight to flashing it with another program. Its totally bricked, not I need to go into bootloder and flash bricked but now a $180 paperweight. I think ill contact HTC, see if its still under warranty or if they have a repair service or maybe sell on ebay at loss. Auesomeness.
Just blame yourself by not carefully reading the stickies...
happened many times to me....
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
download this "update" and flash your wizard with it in bootloader mode. Should fix the problem.
PM if you need help
No...mikejj2004's Wizard should be completely bricked that can't even power on due to flashing incorrect IPL and SPL to a G4 Wizard.
Is there absolutely no way you can get the phone to bootloader mode? what I would reccomend is try pulling the battery out untill the screen goes black and then put it back in then plug the phone in and charge it till the light turns green and then hold the camera button while pressing the power button to get back to bootloader and load manufacturer rom.
Maybe I read wrong and you have already tried to get back to bootloader but if not then I would give it a try. As long as phone can make it to bootloader and has more than 50% charge, you can get it back to manufacturer's rom.
Take a look at this thread, it tells you how to force bootloader given your battery is good enough to turn the device on. CLICK HERE
Good luck my friend.
P.S. Please from now on, ALWAYS read all directions and warnings before attempting to do something you may not understand. That is how these kind of things happen and I would say it sucks to be the proud owner of a $180 paper weight.
mikes device is totally gone. happend to me last week. luckily i still had a nice amount of time left in my warranty so AT&T gave me a replacement yesterday.
yea well lets just hope that since he bought it used that he actually has a warranty...
thats how i did it.
charged the battery at in my friends wizard, put the battery in, held down the camera button and switched it on, voila rainbow screen.
Then i just ran the original O2 upgrade utility.
Not just once!
dharvey4651 said:
yea well lets just hope that since he bought it used that he actually has a warranty...
Click to expand...
Click to collapse
if he got it off ebay or something hes f**ked. no warranty on that
pkoper, you don't understand the difference between battery failure and bricking.
If a device is bricked due to flashing G3 IPL to G4 wizard, the G3 IPL cannot commuicate with G4 chip and tell it to power on, so the device is RIP whatever you are trying to do unless reprogram the G4 chip using a external JTAG connecter.
thunda_chunky said:
if he got it off ebay or something hes f**ked. no warranty on that
Click to expand...
Click to collapse
beleive it or not, they gave me a warranty exchange for an eBay bought phone.
had warranty on the phone prior, and they didn't recognize that I was 'warrantying' a differn't phone. Either they screwed up, or they don't care - I got a warranty exchange on an eBay bought phone.
Just a question..
i have read over the wiki that if it has 3 zeros "000" after 2.xx. then
it is still a G4 device..
then in your post, you have bricked your G4 device with 2.26.0001..
it is contradicting whats written in the wiki..
my fone has these:
IPL/SPL 2.26.0001
GSm 2.25.11
OS 2.26.10.2
is it a G3 or G4?
thanks..
rizortiz
That is a G4!
just a querry my intelligent friends... =)
hi..
i just bought a new fone.. t-mobile
my fone reads:
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.26.10.105
i reseted my fone, i got:
IPL/SPL 2.26.0001
GSM 2.25.11
OS 2.26.10.2
others says 2.26.0001 is a G4, but in the wiki it says its still G3..
am confused.. is my device G3 or G4?
rizortiz
g4 for sure, cause .0001
really..
why is it that in the wiki..
'Note: Some people might be confused by the fact that it says G3s only have 2 zeros. That is in reference to the part AFTER is says "or". If you have 2.26 has you IPL and SPL then you have a G3 Wizard.'
the last line there says that if it has an SPL/IPL of 2.26. it is still a G3 device..
thanks.
the wiki states that phones with "2.xx" would be g3. A wizard with "2.xx.000x" would be g4.
Notice the lack of trailing zeros.
Always Always Always If your phone's ipl/spl ends with .000x it is G4.
I lost my post virginity for this. I hope it helped.
100% G4.
If you don't believe, just flash a IPL to it and wait for a brick being created...
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
TOZE said:
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
Click to expand...
Click to collapse
As long as you can get into the bootloader screen theres a good chance it can be saved... Press the Camera button then turn it on, there should be a rainbow screen, if you get that you're golden. Get a rom called 'Wizard Love' or your original operator rom and flash it, it'll work.
I flash my qtek 9100 with Hard SLP and when install a new ROM (by error with another SPL), after restart hold in boot windows with image a Beer in Roma. After reboot not start (As if it did not have power).
Help me please
herojas said:
I flash my qtek 9100 with Hard SLP and when install a new ROM (by error with another SPL), after restart hold in boot windows with image a Beer in Roma. After reboot not start (As if it did not have power).
Help me please
Click to expand...
Click to collapse
Could you state the original IPL/SPL from where you started from?
This sounds like a doc/IPL/SPL mismatch (aka brick).
However, the hard SPL has a build in protection that would warn you if you tried to hard SPL a G3.
That is why I am quite puzzled.
Could you tell the steps leading to this state?
Did you extract the hard SPL? If So, what program did you run?
Beer in Roma....I think it is the Button's 1.05 ROM for G3 unlocking...So you've got a brick.
AFAIK, the hard SPL just prevent from installing to a G3 Wizard, but not guard against flashing a G3 SPL to a Hard-SPLed G4, so it will still brick a G4.
starkwong said:
Beer in Roma....I think it is the Button's 1.05 ROM for G3 unlocking...So you've got a brick.
AFAIK, the hard SPL just prevent from installing to a G3 Wizard, but not guard against flashing a G3 SPL to a Hard-SPLed G4, so it will still brick a G4.
Click to expand...
Click to collapse
Yeah, you are right, beer in Roma is Button's 1.05 ROM, this is most definitely a brick..
You are right, the current Hard SPL has no SPL/IPL write protection, bricking is still possible.
Seems the user ignored the warnings about flashing ROMs containing IPL/SPL and flashed the 1.05 after hard SPL.
What can I do?
What can I do? The qtek not start anything, it is as if they do not have batteries, not a single flashing light or anything, it goes to a service technician and tell me that I have to change the entire motherboard and not get the parts. . ! ! ! Do we really will have reason?
herojas said:
What can I do? The qtek not start anything, it is as if they do not have batteries, not a single flashing light or anything, it goes to a service technician and tell me that I have to change the entire motherboard and not get the parts. . ! ! ! Do we really will have reason?
Click to expand...
Click to collapse
It's true, the only way to save a device with mismatched bootloaders is to replace the mainboard.
Where can I buy over the Internet a mainboard?
I live in Venezuela and not get the mainboard for a qtek 9100. Does anyone know where I could buy or order the parts?
herojas said:
I live in Venezuela and not get the mainboard for a qtek 9100. Does anyone know where I could buy or order the parts?
Click to expand...
Click to collapse
I love noob toasted bricks!! they just smell great!!!!! Toastyyy !
in mexico city it cost about 150-200 usd a motherboard g3 search in the weba and maybe u can find 1 in venezuela
enjoy it
i unlock G4 Wizard with this method. and after i flash it with a turkish rom file. it's success and very well working without sim card.
Bu when i insert a sim to wizard, it has locked the ppc. and after i flash it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.
and after the ppc is open but stuck on opening screen. i try to master reset it but i can't. and after i remove the battery and detach the sim.
now the ppc can't open. i try to get it to bootloader mode but i can't. when i press master reset & camera button, nothing happens.
i try different button combinations but it can't open.
edit:
i flash it with RUU MUN program
please help
Oh my god...
Flashing Hard SPL to your device does not mean you can flash any ROM you want. You can only flash ROMs that doesn't have IPL and SPL.
Since CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE (Button's ROM) includes IPL and SPL 1.01, you most likely bricked your device.
in this case what can i do?
can i change the flash of the phone? if yes, hoc much does it?
Help Me I Did The Same
I Have The Same Problem If Theres A Solution Please Help Me!!!...
AYALA445 said:
I Have The Same Problem If Theres A Solution Please Help Me!!!...
Click to expand...
Click to collapse
Alas!
If there cud be a solution,but sorry,its a 'BRICK'.There's no solution except to sell it as parts.
If you are in China, there are places that can replace the flash chip for you. Outside China, there seems nobody do this kind of repair...
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "(294) INVALID VENDOR"
any suggestions ...
thanks in advance for your input
Airborne_Pathogen said:
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "wrong update utility"
any suggestions ...
thanks in advance for your input
Click to expand...
Click to collapse
Are you sure SPL is 2.21 and not 2.21.0001 as IPL 2.21.0001 ?
Well,if its 2.21 only,the phone's got mixed Bootloaders (IPL/SPL),IPL 2.21.0001 are G4 and SPL 2.21 is G3,I don't know how you got it,but your phone is 'Bricked'
mmm it figures
so it appears there could be a problem with the imei program,
as i said it never came out of boot mode after the unlock
and no errors were shown ...
i could get another and replaced the main board, this one is in new condition
except for the custom bricked rom . in the future i will not play with a g4
thanks for the diagnosis, no way to flash a new spl / ipl ... i did read that if
it booted you could get it back in some chance cases .. i am curious as to how this happened (others not doing this for a hobby could brick there only phone)
step 1 - ran imei unlock
never came out of boot mode after
2- flashing the to above roms said to be G4 safe
i never look to see what the ipl / spl were before
i looked with the wizard tool but didn't save it
well you live and learn, it's good for parts now off to ebay for another crack at it ...
thanks everyone ... the best thing about this phone is everything you can do to it
with help from those who know ...
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Custom build wm6 roms like TNT etc... never Brick a G4 phone as no IPL/SPL is included in them,they are completely safe for G4 devices.What I can gather,it must be the wrong imei unlock code perhaps.
Well,like Myrddin Wyllt said,there's no harm in trying,so if it gets into Bootloaders,try to flash the official rom and if there's an error "wrong update utility" ,replace the RUU in the rom with this RUU and run this RUU,hope it might work.
Myrddin Wyllt said:
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Click to expand...
Click to collapse
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
stuck
Airborne_Pathogen said:
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
Click to expand...
Click to collapse
ok, i swapped out every RUU i could find i get errors from
read file
invalid vendor id
wrong update utility
im too new to figure this out ..can you extract a ipl / spl from an
official rom and then flash that to get the boot loader's back in sync
i found the att 8125 ipl /spl nbf when i flash, it runs to 100% reboots but no changes
anyone have a link to flashing just the ipl / spl on the g4
i am most thankful for any advise ..
try running the hardspl on phone, it might just work to revert it back to a G4 spl.
Link to HardSPL : http://forum.xda-developers.com/showthread.php?t=332320
and G4 ipl and spl here : http://forum.xda-developers.com/showthread.php?t=342744
Also I paid to the IMEI Check and I had to change the plate because the PDA died as yours. E had not returned to the money of the IMEI Check only reply to me was that it had to change of plate ..... It had the unblocked CID?
bastards
yes they won't return my money ... somehow they bricked my phone
i would use the hard /spl and not the imei those guys are assholes
hi,
does anyone can help please?
i have done hardspl and then tryed to permanent unlock cid.
after it failed, my phone only starts in bootloader mode.
i tryed to flash many roms, but phone doesn't start.
only bootloader appears.
what can i do? please help me. anyone must know what to do...please don't let me kick the phone on the wall
greetz
I told you in the other thread “YOU BRICKED YOUR PHONE” the warning was clear that you had to remove the hard SPL and you didn’t, so now you have an expensive paper weight.
Sorry to say, nobody has been able to recover from this.
bricked is not pemanent
The only way to truly brick it is if it dont boot at all, if u have red green blue boot loader on u can flash [wizard love rom] worked for me.
deadredn209 said:
The only way to truly brick it is if it dont boot at all, if u have red green blue boot loader on u can flash [wizard love rom] worked for me.
Click to expand...
Click to collapse
You obviously didn’t brick your phone, however lenzen24 did.
lenzen24 has a G4 IPL and a G3 SPL this equals a brick, unless someone can get a G4 SPL back in the phone it can’t be recovered.
To my knowledge nobody has recovered from this.