I flash my qtek 9100 with Hard SLP and when install a new ROM (by error with another SPL), after restart hold in boot windows with image a Beer in Roma. After reboot not start (As if it did not have power).
Help me please
herojas said:
I flash my qtek 9100 with Hard SLP and when install a new ROM (by error with another SPL), after restart hold in boot windows with image a Beer in Roma. After reboot not start (As if it did not have power).
Help me please
Click to expand...
Click to collapse
Could you state the original IPL/SPL from where you started from?
This sounds like a doc/IPL/SPL mismatch (aka brick).
However, the hard SPL has a build in protection that would warn you if you tried to hard SPL a G3.
That is why I am quite puzzled.
Could you tell the steps leading to this state?
Did you extract the hard SPL? If So, what program did you run?
Beer in Roma....I think it is the Button's 1.05 ROM for G3 unlocking...So you've got a brick.
AFAIK, the hard SPL just prevent from installing to a G3 Wizard, but not guard against flashing a G3 SPL to a Hard-SPLed G4, so it will still brick a G4.
starkwong said:
Beer in Roma....I think it is the Button's 1.05 ROM for G3 unlocking...So you've got a brick.
AFAIK, the hard SPL just prevent from installing to a G3 Wizard, but not guard against flashing a G3 SPL to a Hard-SPLed G4, so it will still brick a G4.
Click to expand...
Click to collapse
Yeah, you are right, beer in Roma is Button's 1.05 ROM, this is most definitely a brick..
You are right, the current Hard SPL has no SPL/IPL write protection, bricking is still possible.
Seems the user ignored the warnings about flashing ROMs containing IPL/SPL and flashed the 1.05 after hard SPL.
What can I do?
What can I do? The qtek not start anything, it is as if they do not have batteries, not a single flashing light or anything, it goes to a service technician and tell me that I have to change the entire motherboard and not get the parts. . ! ! ! Do we really will have reason?
herojas said:
What can I do? The qtek not start anything, it is as if they do not have batteries, not a single flashing light or anything, it goes to a service technician and tell me that I have to change the entire motherboard and not get the parts. . ! ! ! Do we really will have reason?
Click to expand...
Click to collapse
It's true, the only way to save a device with mismatched bootloaders is to replace the mainboard.
Where can I buy over the Internet a mainboard?
I live in Venezuela and not get the mainboard for a qtek 9100. Does anyone know where I could buy or order the parts?
herojas said:
I live in Venezuela and not get the mainboard for a qtek 9100. Does anyone know where I could buy or order the parts?
Click to expand...
Click to collapse
I love noob toasted bricks!! they just smell great!!!!! Toastyyy !
in mexico city it cost about 150-200 usd a motherboard g3 search in the weba and maybe u can find 1 in venezuela
enjoy it
Related
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Only with a JTAG device. It's a special device that can access the chips without the need for the phone to be working. But nobody knows which are the JTAG pins so no luck here.
The IPL 1.xx is meant for the G3 DOC chip Wizards and G4 all have IPL/SPL starting at 2.xx.xxxxx. Since IPL is the firt bootloader with information and addresses for SPL and since they don't match you'll never get out of that situation...
Thanks for reply. I have JTAC device and will try to find jtag pinouts for Wizard G4.
havy said:
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Click to expand...
Click to collapse
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
dont know how
kdskamal said:
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
Click to expand...
Click to collapse
(1) OK
(2) DONT KNOW HOW!!
Please help, i never did this. how do i flash the phone if my comp does not recognise it (i can only enter the bootloader screen).
You should
1) Flash only IPL/SPL from g4 (f.e. 2.26.0001) to get your SPL/IPL the same with italian RUU 2.5.2
2) Flash ROM without IPL/SPL italian RUU 2.5.2
yesterday we bringed such device to live) try
how do you compare that with Atom
Hi,
I have got O2 Arom.
does anyone know whether my device is equivelent to G3 or G4?? or its completely diff technology that cannot be compared!!!
I know O2 Atom is by Quanta and it uses CPLD (Complex programmble Logic Design!! I hope i remember this right).
this can't be compared at all, totally different technology. there is a whole separate section for the atom. just go to the forum root page and look for the atom.
AFTER FLASH IPL/SPL MY DEVICE IS BOOT IPL 3.08.1, SPL 2.18.0001 AND AFTER RESTART IS DEAD.
HOW TO FLASH BACK IPL/SPL TO 2.18.0001?
PLEASE HELP!
According to your spl, you have a G4 device. What rom did you flash?
So you are saying that the phone does NOT turn no now and all you see is a black screen when you start it?
The phone not turn on , totaly dead!
What can i do to alive again?
My phone is G4 but i flash ipl whit G3 flash and after reboot is dead.
If you flash a G4 phone with a ROM that contains IPL/GPL (as you did), you will brick your phone. Sorry, there isn't anything you can do to revive it. You can try calling your provider or whoever sold you the phone, but chances are slim as you've probably violated the warranty.
Insurance
I knew from your first post that it was bricked (became a brick) meaning it is no longer functional. The only way you can get pass this is by getting a new one if you have insurance that has accidental coverage as this was an accident.
So you knew you were flashing a G3 before you did?
hy anyone have solution for this problem?
fachry said:
hy anyone have solution for this problem?
Click to expand...
Click to collapse
There is no solution for this, it is bricked... sorry
are you sure that???
i have same problem
do we replace the flash???
tvpham said:
are you sure that???
i have same problem
do we replace the flash???
Click to expand...
Click to collapse
i'm revive with JTAG, but when upgrading software, i flash wrong Wizard G3 ipl and spl, now i have tri color boot loader, When flashing Original Firmware, it says vendor id wrong Stupid flasher. noID flasher stuck 80%
Wow, what an awesome night this has been. Busted out my used MDA that I paid $180 for, didn't register in back of my head as I saw it boot with IPL/SPL 2.260001 even though I read that meant its a G4. Tried to downgrade it to button 1.05, ROM said wouldent work with my device, another clue that fell on dead ears as I went straight to flashing it with another program. Its totally bricked, not I need to go into bootloder and flash bricked but now a $180 paperweight. I think ill contact HTC, see if its still under warranty or if they have a repair service or maybe sell on ebay at loss. Auesomeness.
Just blame yourself by not carefully reading the stickies...
happened many times to me....
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
download this "update" and flash your wizard with it in bootloader mode. Should fix the problem.
PM if you need help
No...mikejj2004's Wizard should be completely bricked that can't even power on due to flashing incorrect IPL and SPL to a G4 Wizard.
Is there absolutely no way you can get the phone to bootloader mode? what I would reccomend is try pulling the battery out untill the screen goes black and then put it back in then plug the phone in and charge it till the light turns green and then hold the camera button while pressing the power button to get back to bootloader and load manufacturer rom.
Maybe I read wrong and you have already tried to get back to bootloader but if not then I would give it a try. As long as phone can make it to bootloader and has more than 50% charge, you can get it back to manufacturer's rom.
Take a look at this thread, it tells you how to force bootloader given your battery is good enough to turn the device on. CLICK HERE
Good luck my friend.
P.S. Please from now on, ALWAYS read all directions and warnings before attempting to do something you may not understand. That is how these kind of things happen and I would say it sucks to be the proud owner of a $180 paper weight.
mikes device is totally gone. happend to me last week. luckily i still had a nice amount of time left in my warranty so AT&T gave me a replacement yesterday.
yea well lets just hope that since he bought it used that he actually has a warranty...
thats how i did it.
charged the battery at in my friends wizard, put the battery in, held down the camera button and switched it on, voila rainbow screen.
Then i just ran the original O2 upgrade utility.
Not just once!
dharvey4651 said:
yea well lets just hope that since he bought it used that he actually has a warranty...
Click to expand...
Click to collapse
if he got it off ebay or something hes f**ked. no warranty on that
pkoper, you don't understand the difference between battery failure and bricking.
If a device is bricked due to flashing G3 IPL to G4 wizard, the G3 IPL cannot commuicate with G4 chip and tell it to power on, so the device is RIP whatever you are trying to do unless reprogram the G4 chip using a external JTAG connecter.
thunda_chunky said:
if he got it off ebay or something hes f**ked. no warranty on that
Click to expand...
Click to collapse
beleive it or not, they gave me a warranty exchange for an eBay bought phone.
had warranty on the phone prior, and they didn't recognize that I was 'warrantying' a differn't phone. Either they screwed up, or they don't care - I got a warranty exchange on an eBay bought phone.
Just a question..
i have read over the wiki that if it has 3 zeros "000" after 2.xx. then
it is still a G4 device..
then in your post, you have bricked your G4 device with 2.26.0001..
it is contradicting whats written in the wiki..
my fone has these:
IPL/SPL 2.26.0001
GSm 2.25.11
OS 2.26.10.2
is it a G3 or G4?
thanks..
rizortiz
That is a G4!
just a querry my intelligent friends... =)
hi..
i just bought a new fone.. t-mobile
my fone reads:
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.26.10.105
i reseted my fone, i got:
IPL/SPL 2.26.0001
GSM 2.25.11
OS 2.26.10.2
others says 2.26.0001 is a G4, but in the wiki it says its still G3..
am confused.. is my device G3 or G4?
rizortiz
g4 for sure, cause .0001
really..
why is it that in the wiki..
'Note: Some people might be confused by the fact that it says G3s only have 2 zeros. That is in reference to the part AFTER is says "or". If you have 2.26 has you IPL and SPL then you have a G3 Wizard.'
the last line there says that if it has an SPL/IPL of 2.26. it is still a G3 device..
thanks.
the wiki states that phones with "2.xx" would be g3. A wizard with "2.xx.000x" would be g4.
Notice the lack of trailing zeros.
Always Always Always If your phone's ipl/spl ends with .000x it is G4.
I lost my post virginity for this. I hope it helped.
100% G4.
If you don't believe, just flash a IPL to it and wait for a brick being created...
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
TOZE said:
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
Click to expand...
Click to collapse
As long as you can get into the bootloader screen theres a good chance it can be saved... Press the Camera button then turn it on, there should be a rainbow screen, if you get that you're golden. Get a rom called 'Wizard Love' or your original operator rom and flash it, it'll work.
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
i think your phone is dead sorry R.I.P
morek33 said:
i think your phone is dead sorry R.I.P
Click to expand...
Click to collapse
Indeed, dead......sorry....
Yep same happened to my C550 and sorry it can't be fixed.. i think that something is wrong with the Patched RUU with SPL .. but no one in here listens..
Something wrong indeed: Wrong phone.
I'm very sorry, but flashing always means jeopardizing the phone, especially if you're making mistakes. This is almost like surgery.
In the olden times, prior to the smart devices, there were some back doors, test points [*] and things like that. But I have never heard of those in the HTC context.
My proposal: Put the bricks on eBay and don't shed tears.
cu,
Dirk
[*] My mum still uses a Siemens M55 on which I had to cut deep into the circuit board, at a spot that is smaller than a millimetre in diameter, to destroy a circuit for setting the test point. I can still remember how I sweated and trembled. These were real hardware bricking opportunities, real surgery.
In spv-developer-forum someone wrote, he has luck flashing back the dead 550 to wm2003 with factory flashing tool.
someone_01 said:
In spv-developer-forum someone wrote, he has luck flashing back the dead 550 to wm2003 with factory flashing tool.
Click to expand...
Click to collapse
Okay? Sounds interesting.. Where to get what he used and how ?
Da9L said:
Okay? Sounds interesting.. Where to get what he used and how ?
Click to expand...
Click to collapse
The posting is here hxxp://www.spv-developers.com/forum/showthread.php?t=2650
Since I cannot find a working download link for the WM2003 firmware any longer, here is a link to the WM5.0 by t-mobile for sda-II instead: hxxp://www.tm-phonedownloads.com/files/TE_TMOUK_101584_13145_0160_Ship.exe
Hopefully this works too.
is it safe to put this rom in Hurricane? someone try it???
spl109 is for585
you can look it
http://www.ioicn.com.cn/forum/viewthread.php?tid=257915&highlight=%D7%D6%BF%E2
tanvirashraf said:
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
help plz
i shall be very thankfull to you.
Click to expand...
Click to collapse
see here (russian language): http://pda2u.ru/forum/index.php?showforum=29
On this page is nothing about Hurricane...
Is there any working solution?
There is one topic about SPV C500 (HTC Tornado)
http://pda2u.ru/forum/index.php?showtopic=244
I have been watching that thread for a few days now,looks like there are almost there on jtag flashing,shame i can't understand it all as it looks like fun
Is it looks like fun, I can buy yours dead phones or can repear them
my E-mail:[email protected]
I am so sorry to say your phone is over..........
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%