Ok so I bought a clear case here And while working, I was inspired by A black and silver Ford GT sitting in our shop. Here are the results.
that looks pretty good. may i ask where did you buy your case.
eBay
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
GQ8125 said:
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
Click to expand...
Click to collapse
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
VERY NICE PIMP! Very nice indeeed. an affortable and less dodgy way to do it
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
that reminds me of a friend of mine who once owned one of the cheapest polish cars (http://en.wikipedia.org/wiki/Polski_Fiat_125p) and painted id in similar way (actually he made quite lot of modding inside as well, including chrome-metallic parts that resembled washing machine in a way
oh well, there's been a lot of fun with this piece of junk... and the guy's nickname is still "Viper" ;]
oh yeah. i forgot to mention i like this mod a lot, looks very cool!!
anichillus said:
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
Click to expand...
Click to collapse
I am a Developmental Marketing Technician for Ford Motor Co. I pulled the "Paint Codes" from the door of the GT in the Third Picture. And used PPg enamel paint. I think any paint will work?! And yes I painted the inside. I screwed up the stripes (they should be wider and closer together). But I was in a hurry, I did it on my lunch hour, and still had time to eat! The paint looks really good!! The clear Plastic makes it look like a super thick clear-coat!! I spent a little time on a bench buffer with it. But the paint will never scratch, because it is inside!!
[HINT]
Oh yeah, a little Tip if you decide to try!!! After spraying the inside, no matter how well you mask it, you will end up with a mist of paint on the outside. A little polishing compound and a soft rag removes it like magic!!
Here is a Link to a picture of the case without the phone
congratulations
anione knows if this clear case exist for i- mate k-jam or qtek 9100??
COGRATULATION AGAIN YOU GIVE ME A GREAT IDEA
badbert said:
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Tsuioku said:
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Click to expand...
Click to collapse
Flash means when a plastic piece is cast, a small amount of plastic is left over that needs to be trimmed, or it could leave a jagged edge.
The circle on the back gives it a stable base when you lay the phone down...
could you share the gt theme?
inneyeseakay said:
could you share the gt theme?
Click to expand...
Click to collapse
Sorry I missed your post hope you enjoy it!!
man, why dont they sell these cases in the stores?????
that's a pretty damn good job, nice work!!
My wizzard 's casing is pretty beat up due to me dropping it, just laying it down on concrete, etc. I'm really thinking about actually sanding and 'polishing' the body of it to make it more shiny/get rid of scratches....and then buy a hardcase to go over that...
Wow... tahts the nicest case i've ever seen. Nice job... you should resell your case... =]
I did the same thing(well, solid black). It looks awsome from the front, but I cant get the back to really fit to the phone. I don't know if its my phone or if I just got a bad case.
I think I would have a little trouble returning it painted black though!
Related
Hey guys I haven't posted for awhile. But I bought something cool for my Hermes/8525 from EBAY and I wanted to let you guys know about them. They are made of super-tuff vinyl. Like the stuff cops use for their car graphics. They are shiny and tough. I carry my hermes in my pocket (yeah, yeah I know) but I am a rather large guy. And trust me I don't need anything on my belt to make me bigger in diameter... I have been carrying the Flame skin in my pocket for a few weeks, and it shows no sign of wear. I also bought them for two wizards and my Wife and Daughter have had the same results. They are flawless, no scratches, no fading, and not one loose edge. You'd think that I work for them or something, but I swear I don't. I just wanted to let you guys know that they are cool. And Devon (owner?) is a stand-up guy. The first order I received one wrong. Without question he shipped a replacement that day!
Nice!
I like the way you've changed your today bg to match....smmoooth!
Andy Phillips said:
I like the way you've changed your today bg to match....smmoooth!
Click to expand...
Click to collapse
Pretty simple the skin comes as a complete graphic, already cut out, on a supery shiney looking photo paper(ish). He can do custom ones of what ever you want. After I peeled and applied the skin, I scanned and cropped the remainder, saved it as a jpg, and used themegenCE...
I am gonna do a closeup picture of my kid (I think It will be cool) her eyes will be the today theme!
Yeh,
I just bought the same type of skin off Ebay. Just waiting for it to get here!
Whats wrong about carrying it in your pocket ?
I do the same
Ontopic: It looks very nice!! I guess those things arent very expensive arent they?
How's it holding up? I was thinking about doing a custom one, but I'm a little put off by the cast vinyl idea (at least without handling it myself).
Does the vinyl catch dus and start to peel away? That's the problem I have with the skins when I put my phone in the pocket
I just ordered my holster from seidio and all I need is a full body invisible transparent shield for Tilt. I'm having a difficult time trying to determine which brand is a better choices(Bodyguardz, zagg, phantom skinz). So far, I'm leaning toward Bodyguardz full body shield because it seems to protect the chrome corner side part and heard good reviews on surface texture feel.
Any inputs before I order the bodyguardz? Money is not easy to come by for me so I want to make sure before I plunk down hard earned cash. =)
Thanks in advance.
I bought one of them, think it was the bodyguard or flex version. I cant tell you how they hold up though because I ended up destroying mine while trying to put them on. Talk about a pain in the ass.
It was difficult to place them in the right spots and keep out the air bubbles, even using a credit card to squeegee the air out didnt work out to well. Then some how pieces of the larger ones were sticking to themselves while I was trying to put them on. They arent like the simple screen protectors that come with the phone and are very easy to put on.
They need an instructional video for people like me. Id really love to use the full protectors after shelling out the money I did for my Tilt 2, but I wont waste my money on something thats im likely to ruin before I even get on.
Bodyguardz
Bodyguardz is great, feel and protection wise. It is a little difficult to put on but once on correctly it will be worth it. If you use a little water (actually it comes with applicator spray) it will make it easier to position while applying. I used a Best Skins Ever on my Fuze and it was a little sticky while sliding with the finger but this one is almost like the stock protector, but thicker, longer lasting. If you do a search here a xda there is a thread where someone did a very good job showing and explaining how to put it on. GREAT Of course I have Tmous TP2 but I don't think they are that much different.
I finally took the plunge and ordered bodyguardz for my tilt 2. I'll post pictures and post it here. I hope I'll do a good job installing it. I hope the shield will protect the chrome edge part of the tilt2.
have you guys ever heard of GHOSTARMOR. very similar product. these guys show videos of their product actually being scratched and tossed around. They say its made out of the same material they use on military applications. this stuff looks extremely durable from their videos.
http://www.ghost-armor.com
I wonder if bodygaurdz is made out of the same material that GHOSTARMOR uses. Ive been really leaning towards getting GHOSTARMOR for my Sprint TP2.
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
pimp4cheddar said:
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
Click to expand...
Click to collapse
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
att stock screen guards/got new bodyguardz
this was a dup sorry
jlstauff said:
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
Click to expand...
Click to collapse
I see...
I was actually looking for a screen protector online and in stores and stumbled into the one that AT&T put into the box with the phone. I was soooo excited!
Anyway...I don't know if I can spend $20 on 2 from bodyguardz...it's way too much money. However...you do get a lifetime replacement on them...so it might not be that bad.
Let me know how they come out and if you like them...I'm curious to see how they fit the Tilt 2.
Did you get just the screen protector of the case/phone protectors? They also sell the plastic peices for the back and sides...???
Snap some pics when your done with the application!
Thanks,
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
ProjektFuze said:
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
Click to expand...
Click to collapse
It should be an exact fit
lol yea.. i actually just got mine today.. so yea found out myself... and i put it on perfectly!! seems like a very legit screen protector... very rearely do i use the screen protectors that come out of the box.. this one is actually well made and durable
id love to see pictures of this. Thanks. I ordered the only case ATT had which is a clear plastic one.
I much rather use this and a leather case so i dont scratch it with the case itself.
Bodyguardz
I bought a pair of Bodyguardz because I was very happy with them on my Raphael. They survived a crash (on the moped) which my denim jeans didn't. I also tried Best skinz ever, but they peel off far to easily. I won't be buying that anymore. Anyway, the BGZ armor has been protecting my phone for almost or over a month now. Still happy with it. I'm not so pleased with the fitting though. The ones for Raphel fit absolutely perfect. the one for Rhodium not so... I have to say I could have done a better job with the pieces on the (front)sides of the phone. But that's easy to say in hindsight. It wasn't very clear how they would fit before application. Now I know better. the screenprotector is the worst part (the way its cut out). However many people complain about the screenprotectors from BSE/BGZ/GA because of the rubber-y-ness and go for the stock one (I f-ed up my stock screenprotector so had no choice, btw I've gotten used to it). Still I would recommend BGZ. BGZ has proven itself to me several times. A crash and several drops on the floor. No damage, no scratch and doesn't peel off that easily.
Guys, I need help. I've bought a used RAZR HD a month and a half ago and it was in a very good condition. 9/10, maybe even 9.5. had just a scratch or two on the rim around the screen.
Since then, I've dropped it onto concrete two times and on both occasions in went corner down, so now I've got two completely wrecked corners. Nothing else is broken, it's all fine, the kevlar back is pretty much mint, the screen is great, it's just that rim that is now completely ruining the look of the phone...
Did anyone face the same problem and what have you done to fix it, if anything? The only idea I've got now is to sand down the rim to be at level with the screen, that would possibly make it look good again. Naturally, I'd be very careful as to not scratch the screen...
Can that rim be replaced anyway? I'll check out the disassembly guides and videos now to see whether it goes together with the screen...
I'm so annoyed right now. The second drop happened minutes ago... God flipping damn it. The problem is that Moto's have not been widely used here in Serbia for years now and that makes the availability of any equipment for them more than scarce. I'll be ordering a universal case right now (the one in which you slide the phone in and out) but I'd still love to make it look good again.
Flipping damn it
*edit*
According to this video... It's glued very very strongly together - http://youtu.be/LfAyttf6fWU
That's just great... And I can't even find a silicon case, be it no name or branded, to cover it all up. Will see if I can order anything from across the border.
niksy+ said:
Guys, I need help. I've bought a used RAZR HD a month and a half ago and it was in a very good condition. 9/10, maybe even 9.5. had just a scratch or two on the rim around the screen.
Since then, I've dropped it onto concrete two times and on both occasions in went corner down, so now I've got two completely wrecked corners. Nothing else is broken, it's all fine, the kevlar back is pretty much mint, the screen is great, it's just that rim that is now completely ruining the look of the phone...
Did anyone face the same problem and what have you done to fix it, if anything? The only idea I've got now is to sand down the rim to be at level with the screen, that would possibly make it look good again. Naturally, I'd be very careful as to not scratch the screen...
Can that rim be replaced anyway? I'll check out the disassembly guides and videos now to see whether it goes together with the screen...
I'm so annoyed right now. The second drop happened minutes ago... God flipping damn it. The problem is that Moto's have not been widely used here in Serbia for years now and that makes the availability of any equipment for them more than scarce. I'll be ordering a universal case right now (the one in which you slide the phone in and out) but I'd still love to make it look good again.
Flipping damn it
*edit*
According to this video... It's glued very very strongly together - http://youtu.be/LfAyttf6fWU
That's just great... And I can't even find a silicon case, be it no name or branded, to cover it all up. Will see if I can order anything from across the border.
Click to expand...
Click to collapse
Was this with a case on the phone or with the phone not in a case? Just curious as I have my phone in a case and have dropped it on the corner and no issue like you describe. In fact, no scratches at all.
Just curious.
iBolski said:
Was this with a case on the phone or with the phone not in a case? Just curious as I have my phone in a case and have dropped it on the corner and no issue like you describe. In fact, no scratches at all.
Just curious.
Click to expand...
Click to collapse
The phone was bare naked, mate. I haven't got any kind of case as of yet
*edit* Here goes a couple of picture, so someone could relate... I'm so annoyed that I've put it up for sale. If nobody takes it, I'll be sanding the rim/bezel. Perhaps all around, perhaps just this corner, not sure for now...
niksy+ said:
The phone was bare naked, mate. I haven't got any kind of case as of yet
*edit* Here goes a couple of picture, so someone could relate... I'm so annoyed that I've put it up for sale. If nobody takes it, I'll be sanding the rim/bezel. Perhaps all around, perhaps just this corner, not sure for now...
Click to expand...
Click to collapse
i recommend an otterbox defender, got mine off amazon for 20 dollars and because they are guaranteed for life i have gotten two replacements for free. i have dropped my phone off a 12 foot ladder and have thrown it against walls( dont ask) and have zero scratches or dents. phone is in mint condition.
ncsuwolfs said:
i recommend an otterbox defender, got mine off amazon for 20 dollars and because they are guaranteed for life i have gotten two replacements for free. i have dropped my phone off a 12 foot ladder and have thrown it against walls( dont ask) and have zero scratches or dents. phone is in mint condition.
Click to expand...
Click to collapse
This would be it, right - http://youtu.be/Eg5qkRCm5pU ? But, doesn't it turn what is already a quite a big phone into a massive one? Because it certainly seems so I'm guessing this cannot fit a pocket of any sort of pants? But it does seem to offer outstanding protection. Alas, at what a price, both functionality and monetary-wise (the price is $40+ on amazon?)... But even if I wanted to spend that amount of money on a case, I'd have to keep my fingers crossed for probably no less than a month, hoping that it will eventually arrive, intact and without many additional fees. Third world problems...
Thanks for the advice, anyway! I might pick up the Commuter edition, it seems more reasonable for my needs
niksy+ said:
This would be it, right - http://youtu.be/Eg5qkRCm5pU ? But, doesn't it turn what is already a quite a big phone into a massive one? Because it certainly seems so I'm guessing this cannot fit a pocket of any sort of pants? But it does seem to offer outstanding protection. Alas, at what a price, both functionality and monetary-wise (the price is $40+ on amazon?)... But even if I wanted to spend that amount of money on a case, I'd have to keep my fingers crossed for probably no less than a month, hoping that it will eventually arrive, intact and without many additional fees. Third world problems...
Thanks for the advice, anyway! I might pick up the Commuter edition, it seems more reasonable for my needs
Click to expand...
Click to collapse
yes thats it, im in construction so i went with defender, my sister has commuter and it seems to offer a level of protection for most peoples uses (2-3 foot drops) and yes it does make the phone bigger so if thats a concern i would go with commuter, also the screen protector on the defender is part of the case but with the commuter its a stick on screen protector if that matters to you( i can never get those to go on without wrinkles) i beleieve the 40 $ ones are the black ones bc otterbox stopped making them i bought a black one for 20$ 6 months ago
ncsuwolfs said:
yes thats it, im in construction so i went with defender, my sister has commuter and it seems to offer a level of protection for most peoples uses (2-3 foot drops) and yes it does make the phone bigger so if thats a concern i would go with commuter, also the screen protector on the defender is part of the case but with the commuter its a stick on screen protector if that matters to you( i can never get those to go on without wrinkles) i beleieve the 40 $ ones are the black ones bc otterbox stopped making them i bought a black one for 20$ 6 months ago
Click to expand...
Click to collapse
Thanks for the information once again, mate! And, yeah, I just figured out that there are different versions. The one with pink details is the cheapest...damn
We'll see how I can get my hands on one. The shipping fees are going to be higher than the price of the case itself, ffs :/
niksy+ said:
Thanks for the information once again, mate! And, yeah, I just figured out that there are different versions. The one with pink details is the cheapest...damn
We'll see how I can get my hands on one. The shipping fees are going to be higher than the price of the case itself, ffs :/
Click to expand...
Click to collapse
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
iBolski said:
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
Click to expand...
Click to collapse
This is very much like the generic cases available here for most smartphones, priced at $2-3. Would you say that your case has a premium quality and is worth the higher price? Because I've found those generic ones available together with free shipping on eBay. But I know how lousy their protection and appearance are, so I'm still weighing my options.
niksy+ said:
This is very much like the generic cases available here for most smartphones, priced at $2-3. Would you say that your case has a premium quality and is worth the higher price? Because I've found those generic ones available together with free shipping on eBay. But I know how lousy their protection and appearance are, so I'm still weighing my options.
Click to expand...
Click to collapse
Again, that is not exactly the case I have, but I purchased it at a Walmat department store for about $14.
It feels rubbery and it's flexible when the phone is not in it. Mine says "Body Glove" on it but I cannot find it on their site (they don't list any cases for the Droid RAZR HD).
Overall, I wouldn't say it's premium quality (not like I had with my Otterbox cases for my OG RAZR MAXX that I used to own), but it does seem to do the job for me. As I said, I've dropped the phone face down with the case I have (which is similar to the one I linked to on Amazon) and the phone came out unscathed. It was about a three foot drop onto the concrete floor in my garage if that gives any indication.
iBolski said:
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
Click to expand...
Click to collapse
Another vote to the Diztronic - it would cover that damage and will prevent the same type of damage when you drop it again. Mine has lived in one of these since I got it and gets tossed around all the time. Has landed face first a few times and has not skipped a beat thanks to the raised lip.
OrBy said:
Another vote to the Diztronic - it would cover that damage and will prevent the same type of damage when you drop it again. Mine has lived in one of these since I got it and gets tossed around all the time. Has landed face first a few times and has not skipped a beat thanks to the raised lip.
Click to expand...
Click to collapse
Thanks, mate. The Diztronic looks wonderful compared to the chinese "s-line" thing I bought because of free shipping... It's just crap and it doesn't even cover the edges properly - the left one is fine, but it cannot stay on top of the right one. Check the picture for illustration. I'll be sure to get the Diztronic one in the future. Can you just tell me whether its rubberised or is it just the matte finish making it look as if though it were? Because it looks like it is and that it's insanely sticky and that I wouldn't be able to stick it in my pocket, but I guess it's just the matte finish
hi as many note 3 users know, the plastic side frame is easy to get damaged, i have few cracks and one line just under the main power button (not sure just facial or completely crack?)
so, how easy is to change and which one i have to buy ? - im quite noob in hardware sides.
Sure you can buy one on Ebay
I have the same problem, the silver plastic bezel is very fragile.
If you search in Ebay you can found the Bezel and some of them come with tools to turn this in a complete DIY.
Actually i found all the body for this phone in ebay, so you can turn your used and damaged note 3 into a "brand new" one.
Thanks 4 the info. Where did you find it. Could you please share the link?
Thx in advance
hey guys.here is a link for the bezel replacement Bezel On EBAY
i want to tell you that it's not that easy to change it as you need to move the lcd screen from the one bezel to the other one.
there is glue between the lcd and the bezel so you need to warm it and remove it really carefully.i did the process yesterday on my note 3 and it was a pain in the a$$ so i have to tell you to be carefull before any move you re going to do.
Any link for Indian note 3?
Sent from my SM-N900 using XDA Free mobile app
I considered doing this, as I was given a note 3 a while back, but the bezel is beat to hell and the screen had a minor crack. I should've replaced both at the same time, but the small crack turned into a large one and needed immediate attention It's covered by a case now anyway though, so it's not much of an issue anymore.
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Its a tough job!!!
got my Note 3 as a gift from a friend who cracked it. I replaced the entire Display (along with frame)
and 3 days later I dropped it and got scratches in the frame.
so I decided to buy a frame and fix but its really a tough job.
so I got a bumper for 3$ and job done
I have installed one of those here http://www.ebay.com/itm/Thin-Aluminum-Metal-Bumper-Case-Cover-For-Samsung-Galaxy-Note-3-III-N9000-N9005/151251742076?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D31478%26meid%3D341538ef5e9d4d6da3228a5f902e8cf1%26pid%3D100033%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26sd%3D151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
thanks i thought i saw same one for bit less than that, will browse ebay later.
maskerwsk said:
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Click to expand...
Click to collapse
Photos plz
Up! I'm interested too.
yes i just remember i have some sand paper at home please post photo and detailed instructions... cheers
rockbastard said:
I have installed one of those here http://www.ebay.com/itm/Thin-Alumin...id=100033&rk=1&rkt=4&mehot=pp&sd=151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
Click to expand...
Click to collapse
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
triad88 said:
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
Click to expand...
Click to collapse
I haven't noticed any drop in reception at all
rockbastard said:
I haven't noticed any drop in reception at all
Click to expand...
Click to collapse
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Mr.Ultimate said:
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Click to expand...
Click to collapse
you have a lot of cases!
erwinsie said:
you have a lot of cases!
Click to expand...
Click to collapse
little too many ... beware that those wooden cases are the coolest thing your phone can get but if you do drop your phone they crack and break apart sometimes... not always though but alot alot sooner than any plastic case would and thats a heartbreaking thing because there not exactly cheap case, but hey - how often does someones phone feels and smells like real fresh quality piece of wood? I like them wooden ones very much even if they crack and put some tax on my pocket at the end of the day its almost like your personal signature of style ... besides, its always warm to touch and zero signal interference
PS: lots more were thrown out many months ago, especially all those metalized ones, no use to me nor could I offer them to anyone I knew who had note 3 due to what they are
When my display was damaged, it got repaired, not only the glass, but the whole display including the bezel, it was 1 piece.. I guess it's very hard to replace only the bezel
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.