hi as many note 3 users know, the plastic side frame is easy to get damaged, i have few cracks and one line just under the main power button (not sure just facial or completely crack?)
so, how easy is to change and which one i have to buy ? - im quite noob in hardware sides.
Sure you can buy one on Ebay
I have the same problem, the silver plastic bezel is very fragile.
If you search in Ebay you can found the Bezel and some of them come with tools to turn this in a complete DIY.
Actually i found all the body for this phone in ebay, so you can turn your used and damaged note 3 into a "brand new" one.
Thanks 4 the info. Where did you find it. Could you please share the link?
Thx in advance
hey guys.here is a link for the bezel replacement Bezel On EBAY
i want to tell you that it's not that easy to change it as you need to move the lcd screen from the one bezel to the other one.
there is glue between the lcd and the bezel so you need to warm it and remove it really carefully.i did the process yesterday on my note 3 and it was a pain in the a$$ so i have to tell you to be carefull before any move you re going to do.
Any link for Indian note 3?
Sent from my SM-N900 using XDA Free mobile app
I considered doing this, as I was given a note 3 a while back, but the bezel is beat to hell and the screen had a minor crack. I should've replaced both at the same time, but the small crack turned into a large one and needed immediate attention It's covered by a case now anyway though, so it's not much of an issue anymore.
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Its a tough job!!!
got my Note 3 as a gift from a friend who cracked it. I replaced the entire Display (along with frame)
and 3 days later I dropped it and got scratches in the frame.
so I decided to buy a frame and fix but its really a tough job.
so I got a bumper for 3$ and job done
I have installed one of those here http://www.ebay.com/itm/Thin-Aluminum-Metal-Bumper-Case-Cover-For-Samsung-Galaxy-Note-3-III-N9000-N9005/151251742076?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D31478%26meid%3D341538ef5e9d4d6da3228a5f902e8cf1%26pid%3D100033%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26sd%3D151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
thanks i thought i saw same one for bit less than that, will browse ebay later.
maskerwsk said:
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Click to expand...
Click to collapse
Photos plz
Up! I'm interested too.
yes i just remember i have some sand paper at home please post photo and detailed instructions... cheers
rockbastard said:
I have installed one of those here http://www.ebay.com/itm/Thin-Alumin...id=100033&rk=1&rkt=4&mehot=pp&sd=151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
Click to expand...
Click to collapse
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
triad88 said:
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
Click to expand...
Click to collapse
I haven't noticed any drop in reception at all
rockbastard said:
I haven't noticed any drop in reception at all
Click to expand...
Click to collapse
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Mr.Ultimate said:
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Click to expand...
Click to collapse
you have a lot of cases!
erwinsie said:
you have a lot of cases!
Click to expand...
Click to collapse
little too many ... beware that those wooden cases are the coolest thing your phone can get but if you do drop your phone they crack and break apart sometimes... not always though but alot alot sooner than any plastic case would and thats a heartbreaking thing because there not exactly cheap case, but hey - how often does someones phone feels and smells like real fresh quality piece of wood? I like them wooden ones very much even if they crack and put some tax on my pocket at the end of the day its almost like your personal signature of style ... besides, its always warm to touch and zero signal interference
PS: lots more were thrown out many months ago, especially all those metalized ones, no use to me nor could I offer them to anyone I knew who had note 3 due to what they are
When my display was damaged, it got repaired, not only the glass, but the whole display including the bezel, it was 1 piece.. I guess it's very hard to replace only the bezel
Related
Ok so I bought a clear case here And while working, I was inspired by A black and silver Ford GT sitting in our shop. Here are the results.
that looks pretty good. may i ask where did you buy your case.
eBay
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
GQ8125 said:
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
Click to expand...
Click to collapse
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
VERY NICE PIMP! Very nice indeeed. an affortable and less dodgy way to do it
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
that reminds me of a friend of mine who once owned one of the cheapest polish cars (http://en.wikipedia.org/wiki/Polski_Fiat_125p) and painted id in similar way (actually he made quite lot of modding inside as well, including chrome-metallic parts that resembled washing machine in a way
oh well, there's been a lot of fun with this piece of junk... and the guy's nickname is still "Viper" ;]
oh yeah. i forgot to mention i like this mod a lot, looks very cool!!
anichillus said:
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
Click to expand...
Click to collapse
I am a Developmental Marketing Technician for Ford Motor Co. I pulled the "Paint Codes" from the door of the GT in the Third Picture. And used PPg enamel paint. I think any paint will work?! And yes I painted the inside. I screwed up the stripes (they should be wider and closer together). But I was in a hurry, I did it on my lunch hour, and still had time to eat! The paint looks really good!! The clear Plastic makes it look like a super thick clear-coat!! I spent a little time on a bench buffer with it. But the paint will never scratch, because it is inside!!
[HINT]
Oh yeah, a little Tip if you decide to try!!! After spraying the inside, no matter how well you mask it, you will end up with a mist of paint on the outside. A little polishing compound and a soft rag removes it like magic!!
Here is a Link to a picture of the case without the phone
congratulations
anione knows if this clear case exist for i- mate k-jam or qtek 9100??
COGRATULATION AGAIN YOU GIVE ME A GREAT IDEA
badbert said:
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Tsuioku said:
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Click to expand...
Click to collapse
Flash means when a plastic piece is cast, a small amount of plastic is left over that needs to be trimmed, or it could leave a jagged edge.
The circle on the back gives it a stable base when you lay the phone down...
could you share the gt theme?
inneyeseakay said:
could you share the gt theme?
Click to expand...
Click to collapse
Sorry I missed your post hope you enjoy it!!
man, why dont they sell these cases in the stores?????
that's a pretty damn good job, nice work!!
My wizzard 's casing is pretty beat up due to me dropping it, just laying it down on concrete, etc. I'm really thinking about actually sanding and 'polishing' the body of it to make it more shiny/get rid of scratches....and then buy a hardcase to go over that...
Wow... tahts the nicest case i've ever seen. Nice job... you should resell your case... =]
I did the same thing(well, solid black). It looks awsome from the front, but I cant get the back to really fit to the phone. I don't know if its my phone or if I just got a bad case.
I think I would have a little trouble returning it painted black though!
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Okay so I am sharing my experience for everyone. I had recently broken my screen, and I needed to replace the screen. I bought a screen digitizer off of eBay, and....Destroyed the phone sub frame. The reason I am posting is because I am warning all of you, you need to buy a full display assembly online. This includes the whole new display( glass and LCD) wires and bits, and a full subframe. Unless you are superior to an Asian 12 year old working in the factory that made your phone (hint hint, wink wink, you're not) than you need to buy a full assembly, or end up like me an destroy your phone.
Sent from my Amazon Kindle Fire HD using Tapatalk HD
+1.
Unfortunately, I saw this post after doing damage to my phone. The plastic housing that the digitizer /lcd sits in is verrrryyy easy to damage around the edges when you try to separate the screen. Heating it with the heat gun to get the separation actually makes it even more fragile and prone to damage. Thankfully I was able to return digitizer/lcd and get full setup from here :
http://www.etradesupply.com/oem-htc-evo-4g-lte-lcd-screen-and-digitizer-assembly-with-front-housing-and-light-guide.html
Hopefully things will go a little better this time.
Wow, that includes the plastic frame? I replaced my screen a couple of weeks ago (glass and LCD), and the edges of the frame did get slightly chewed up. It's not too bad, but I wish I had known abut this item.
On a positive note, I suppose I can get a job in China when the economy completely collapses.
Sent from my Nexus 7 using xda app-developers app
Ya my screen got waterlogged after I got trashed and left it out in the rain. Let everything dry out and thankfully all the boards and connectors work. I ended up going the cheap route and just buying a screen and not the frame. I almost successfully got the thing apart. I do have a small chip in the frame on the left side but my case covers that. I only paid around $50 but I did give myself around $50 in headaches. Definitely spend the extra $50 and just get the whole package.
If you do decide to try and separate the screen from the frame, use a lot of heat. Not necessarily high heat, but for a good duration. Get the adhesive nice and warm. Then pry it loose through one of the holes in the housing/frame (go at it from the back) and slowly work it away from the frame. Once you get it off, heat the adhesive back up and then add some 5 minute quick epoxy to the black adhesive pads in the frame. Then use some clamps and let the epoxy cure. There is a great video I followed below. It took me a while and I will probably ride with this for a minute until it bothers the hell out of me. My gf said she can't even notice.
https://www.youtube.com/watch?v=Ae52Ug8vFwA
case screen cover plastic sheet work?
I'm just wondering how many naked phones get broke compared to well protected?
Gnexd said:
I'm just wondering how many naked phones get broke compared to well protected?
Click to expand...
Click to collapse
I have a Incipio NGP case on mine all the time and I always have a screen protector installed (usually the cheap ones from Amazon). I have never had a problem with the screen until I left my phone out in the rain. The Gorilla Glass II is decently strong but only to a certain extent. I mainly use the screen protector from scratches if I accidentally put it in the same pocket as my keys.
I was afraid of breaking mine one day, fortunately for me my volume button went out first and I have Best Buys insurance and the replace the phone with no deductible.
Seems like screen issues are pretty common on this model. I'm on my 4th Evo now because the screen kept failing on me. Based on what I read it sounds like I'd never want to have to replace this myself.
Hi guys, can you check your HAM2 on the corner chrome bezel edge, it appears to have a straight crack or separation on all 4 corners, is this normal? Or it is really like this that the chrome 4 corners bezel has a separation on it?
I see it too!
rjan22 said:
Hi guys, can you check your HAM2 on the corner chrome bezel edge, it appears to have a straight crack or separation on all 4 corners, is this normal? Or it is really like this that the chrome 4 corners bezel has a separation on it?
Click to expand...
Click to collapse
Wow, I never noticed this! Probably because I have a case, but it doesn't cover the entire phone anyway.
For those wondering, the chrome-looking band around the phone seems to be made up of 4 pieces, 1 for each side of the phone.
So funny I mentioned crack, because the darn thing is irregular and not stright at all. It appears that it cracked. May be they cut it manually because labor in china is cheaper compare to buying a machine and cost of electricity?
Well, our phone has a pretty cheap price, so it should be excepted to see some "bad" things!
I would say that they are from the molding process of that particular piece of the phone. I don't think they are cracks.
I imagine every phone is like that based on everyone saying they see the same thing. I have them on mine as well. Nothing to worry about.
FYI had Trident case with tempered glass screen protector. Jaws of life to remove this last time severely cracked screen protector phone was bent 5 to 10 degrees. Reshaped the phone and 0 damage 100% intact. Flexible chassis and display makes for greatness. Wipes brow ...
I can barely see the line on my phone. I had to look several times to notice it.
Sent from my MT2L03 using XDA Free mobile app
D33PTHAWTE said:
I can barely see the line on my phone. I had to look several times to notice it.
Click to expand...
Click to collapse
was going to say 'nope, none here' - but upon real close inspection there is a very unnoticeable separation around each corner.
I've had mine in the orig HW case since day one. Did drop it off a cooler onto river rock (poolside) last month and it ended up face down on the pebble rock, front cover laying flat out. In fact the whole phone separated from the back cover
I was nervous when I saw it, but picked it up and the screen was not damaged :fingers-crossed: Just now saw a small chip out of the upper right corner that probably happened that day.
So far, I'm impressed for the money spent.
Hi, to start off sorry if this is not in the right location.
I thought I might get the ball rolling and possibly spark the idea if it's not already an option for use on more than just one phone.
I really hate my Xperia Z2 for one reason. The glass backplate of the phone can shatter easily.
Sure, you can buy a replacement but the quality is garbage in comparison to oem and I've heard Sony will replace it for 200$ USD? forget that.
I've replaced the cover buying from ebay and amazon and after getting my fourth replacement, it cracked just applying it to my phone...
So my question is, how do I get my hands on an aluminum replacement or some sort of metal that will at least stand the test of time?
I'm also thinking of getting in touch with a sheet metal fabricator, as I see no other options out there or just keep using the phone without a backplate and a bulky case. The Z2 is still kicking ass otherwise so I really think it's crazy to replace my phone that's only a few years old and
let it sit there collecting dust cause of a cosmetic issue.
SkyboneNoya said:
Hi, to start off sorry if this is not in the right location.
I thought I might get the ball rolling and possibly spark the idea if it's not already an option for use on more than just one phone.
I really hate my Xperia Z2 for one reason. The glass backplate of the phone can shatter easily.
Sure, you can buy a replacement but the quality is garbage in comparison to oem and I've heard Sony will replace it for 200$ USD? forget that.
I've replaced the cover buying from ebay and amazon and after getting my fourth replacement, it cracked just applying it to my phone...
So my question is, how do I get my hands on an aluminum replacement or some sort of metal that will at least stand the test of time?
I'm also thinking of getting in touch with a sheet metal fabricator, as I see no other options out there or just keep using the phone without a backplate and a bulky case. The Z2 is still kicking ass otherwise so I really think it's crazy to replace my phone that's only a few years old and
let it sit there collecting dust cause of a cosmetic issue.
Click to expand...
Click to collapse
Metal is a bad idea because it'll block the radio signals. Yes, there's plenty of metal-framed phones, but they all have plastic strips or some other means of not blocking signals. If the phone's not deliberately designed that way, it won't work well. For example, when I briefly had a Note 3, I got one of those aluminum/carbon fibre cases, and even though the back was only a skeletonized aluminum, it still dropped my signal by 1 or 2 bars.
Carbon fibre, however, would be a pretty cool choice. I have no idea the thickness of the back glass on the Z2, but you can probably find sheets of the appropriate thickness, even if it's a flexible sheet. It won't exactly be cheap (probably ~$20 for a 6x6" sheet of whatever), but it'd look really cool and definitely stand the test of time.
Planterz said:
Metal is a bad idea because it'll block the radio signals. Yes, there's plenty of metal-framed phones, but they all have plastic strips or some other means of not blocking signals. If the phone's not deliberately designed that way, it won't work well. For example, when I briefly had a Note 3, I got one of those aluminum/carbon fibre cases, and even though the back was only a skeletonized aluminum, it still dropped my signal by 1 or 2 bars.
Carbon fibre, however, would be a pretty cool choice. I have no idea the thickness of the back glass on the Z2, but you can probably find sheets of the appropriate thickness, even if it's a flexible sheet. It won't exactly be cheap (probably ~$20 for a 6x6" sheet of whatever), but it'd look really cool and definitely stand the test of time.
Click to expand...
Click to collapse
Nice, I didn't think about signal blocking. Carbon fiber sounds cool.