I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Related
I generally don't like using cases on my phones but since I paid so much for my Xperia S I have been using one. I was curious how people who don't use cases on it have had their phone look like. How has the Xperia S survived the day to day normal wear and usage?
i dont have a case, cause i dont want to cover my beautiful XS..hehe..but i have a pouch for my XS.
mharckk said:
i dont have a case, cause i dont want to cover my beautiful XS..hehe..but i have a pouch for my XS.
Click to expand...
Click to collapse
What pouch.
Sent from hell using Xperia-S(atan)
I didn't use a case at first but a porch, and I hit a table with the lower left edge of my s (really soft, I didn't even drop it, I just put it down quickly) and it cracked and the paint peeled of. I drew over it with nail polish but I have been using a hard case ever since PLUS a porch.
And I still get a lot of scratches on the housing where the cut outs of my case are (mostly around the USB and headphone plugs, even though I treat my phone really carefully)
I wouldn't recommend using the phone without a case, it scratches way too easy.
Gesendet von meinem LT26i
Man this phone body is like a tin can
Me myself didn't like a case as well
I usually put my phone in the side pocket alongside with headset and it scratched. Hopefully i have it black so the scratch is not really visible.
And do not ever put your phone in the same pocket with your car keys. In my own experience it can dent your phone pretty bad
Sent from my Xperia S using xda premium
mrsatan said:
What pouch.
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
a cotton pouch (black), as protection of my XS when my phone is in my pocket.
Theonlyzii said:
Man this phone body is like a tin can
Me myself didn't like a case as well
I usually put my phone in the side pocket alongside with headset and it scratched. Hopefully i have it black so the scratch is not really visible.
And do not ever put your phone in the same pocket with your car keys. In my own experience it can dent your phone pretty bad
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
Lucky you, I have the white version, every scratch is visible :/
Nail polish all the way... In a year my complete phone will be painted in nail polish
Gesendet von meinem LT26i
I got a white Sony Xperia S a couple of days after the release. Never used any cases, I really hate 'em unless they add functionality.
I dropped my Xperia S only once on tiles, but it wasn't a very high drop. You can only see the scuffs if you look for them. They're really tiny.
Also, the only other scratch I have on my Xperia S is just my fault. I tried putting it in a tin case-like thing I had on a tripod which I had made for a smaller phone, but what I didn't realise was that the edges were very sharp.
My conclusion: Unless you like dropping your phone on the floor or scratch it on purpose with very sharp items, the Xperia S probably won't have any scratches at all. Even in white. The screen too is fine and the Sony (Ericsson) logo on the back isn't scratched either.
I've had mine for 5 months. It once dropped from a very low height facing down, so the screen kinda had a "scatter" from the side (volume up height) and the line goes until the very top of the USB port. It is only seeable at certain angles. There are also tiny scratches, but they are on the screen protector, so.... It once dropped from a slightly higher height than the first, but nothing happened.
"What really matters in this world, anyway?"
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
mrsatan said:
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
Click to expand...
Click to collapse
Mine is a white one. I don't have a single scratch (none that I can see, at least). And my screen "scratches" are like yours, but they are on the shatter proof that come already applied to the device.
"What really matters in this world, anyway?"
Felimenta97 said:
Mine is a white one. I don't have a single scratch (none that I can see, at least). And my screen "scratches" are like yours, but they are on the shatter proof that come already applied to the device.
"What really matters in this world, anyway?"
Click to expand...
Click to collapse
Yeah my screen scatches are literally almost impossible to see. I removed my shatter proof sheet the day I got the phone though.
mrsatan said:
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
Click to expand...
Click to collapse
The Xperia S already has a screen protector on it from the factory. Going case free isn't a problem for me at all
I wouldn't remove this protector though. I read somewhere that it could make capacitive button sensitivity less.
I use some cheap pocket-like condom to keep my sola semi-safe.
Back in 2010 when I just bought a brand new HTC Desire I immediately wanted to protect it. I mean PROTECT IT.
I bought the Krusell Orbiflex thingie (was like uberexpensive) and was pretty happy with it until... after few months I realized that the screen was actually scratched by the case itself!
Then I sent over the HTC to the service point (because of broken camera or something). I repeated the procedure 5 times, so they swapped the unit into a new one.
I was happy and stuff and put the new, shiny device into the same case .
After few weeks my brand new HTC was scratched again in the very same spot beacuse of the case. AGAIN.
Maybe a little bit OT but kind of funny story it was .
kub4nek said:
I use some cheap pocket-like condom to keep my sola semi-safe.
Back in 2010 when I just bought a brand new HTC Desire I immediately wanted to protect it. I mean PROTECT IT.
I bought the Krusell Orbiflex thingie (was like uberexpensive) and was pretty happy with it until... after few months I realized that the screen was actually scratched by the case itself!
Then I sent over the HTC to the service point (because of broken camera or something). I repeated the procedure 5 times, so they swapped the unit into a new one.
I was happy and stuff and put the new, shiny device into the same case .
After few weeks my brand new HTC was scratched again in the very same spot beacuse of the case. AGAIN.
Maybe a little bit OT but kind of funny story it was .
Click to expand...
Click to collapse
In other words, you can be too careful
Hermantje said:
The Xperia S already has a screen protector on it from the factory. Going case free isn't a problem for me at all
I wouldn't remove this protector though. I read somewhere that it could make capacitive button sensitivity less.
Click to expand...
Click to collapse
No removing it makes it more sensitive. Trust me I have done it on 3 different Xperia S phones.
I use a nillkin case, but the top and bottom. Of the phone have so many scratches now. Hence, changed to a tpu Gel case instead.
Sent from my Nexus 7 using Tapatalk 2
wel, I don't really like the screen protector at all and even less a case.
I'm happy with a naked Xperia U, and whenever it get any hard scratches the phone will bet getting old already.
People don't stay with their phones for much longer anyway, so i don't think it's a good thing use cases...
My only scratch is off all places on the glass in the centre of he screen on my s3 after taking it into a repair shop without my case on. Was just glad to have my phone back so let the guy off with the scratch... normally use a otterbox defender case.
Sent from my GT-I9300 using xda premium
Azyx said:
People don't stay with their phones for much longer anyway, so i don't think it's a good thing use cases...
Click to expand...
Click to collapse
Resale value.
I sanded down the back of my black chassis yesterday and then got bored at work today so I decided to sand down the front as well and make my LTEvo even more unique. I don't expect everyone to like it. Some will.....some won't. It's all good. I just enjoy modding things and I like having a truly one of a kind phone.
That having been said.....ONT TO THE PICS!!!
The Back!!
http://i48.photobucket.com/albums/f238/Concordium/photo31.jpg
The Front!!
http://i48.photobucket.com/albums/f238/Concordium/photo11.jpg
Looks pretty cool
cm10ed 3VO
I like the front gives it a classy look
I wouldnt do either personally, but the front looks better than the back imo
Looks good
Sent from my EVO using Xparent Blue Tapatalk 2
+1 to the front appeal.. Did you disassemble it or just sand as is? I've got a couple chips on the front side and based on your pix I'll probly tryn do the same..
Sent from my EVO using Tapatalk 2
scott_0 said:
I wouldnt do either personally, but the front looks better than the back imo
Click to expand...
Click to collapse
Well I did it for 2 reasons. 1, I love to mod things. So trying different things that I don't see anywhere was my inspiration. 2, I wanted to have a phone that was 100% unique. Between my software setup, theme, and external appearance I can honestly say that there is no other phone like mine in the world. Customizations! That's why I love Android as well!
KERKEDAGAIN said:
+1 to the front appeal.. Did you disassemble it or just sand as is? I've got a couple chips on the front side and based on your pix I'll probly tryn do the same..
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I disassembled the phone. There is no way that I would sand the front down with the digitizer still attached. I would've scratched the crap out of it. I like the silver accents on the front.
Also, I had black marks along the side of my phone (the trim on the side of the phone that is silver from the manufacturer). I just took some ultra fine grit sandpaper (400 - 600 grit) and sanded the side of the chassis down as well. It got rid of all of the scratches and knicks that I had in the chassis and smoothed it all out to a more uniform finish that matched the rest of the sanded phone. So after a while of using the phone you notice scratches and imperfections like that along the silver trim just sand it down a tad and it will look as good as new. :good:
Nicely done. I've been wanting to do something like that myself. I sanded down the top housing and painted it dark grey.
Where did you get those carbon fiber parts?
Some 2000 grit and then some Flitz metal polish would really set that off.
Really cool - I like all the metallic exposure!
That looks awesome! I like how you left the black htc letters on the back too. Nice job!
Sent from my EVO using xda premium
Thanks for the positive feedback guys.
falconoble said:
Nicely done. I've been wanting to do something like that myself. I sanded down the top housing and painted it dark grey.
Where did you get those carbon fiber parts?
Click to expand...
Click to collapse
I don't recall where I purchased it from. It's 3M di-noc carbon fiber vinyl. Wherever you find that stuff online it should be the same thing.
Looks Awesome!
However, I don't really want to do it to mine.... Lol I'd probably sand the screen by accident.
Va1ha1a said:
However, I don't really want to do it to mine.... Lol I'd probably sand the screen by accident.
Click to expand...
Click to collapse
I disassembled the phone in order to sand the chassis so that there was no risk of accidentally sanding the screen. Takes a minute or two to take the phone apart and you are ready to start sanding.
I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
in pouch all the time, no chance to scratch it
Carry mine naked (the phone not me) and not a single mark on it yet. It may be to soon to tell but so far so good..
I panicked when I realized that my keys were in the same pocket as my phone. But not a scratch yet.
Sent from my HTC One using xda premium
No scratches on the body, but like the guy before me I accidently dropped my phone into my pocket with keys, I got a couple small little nicks on the bezel but you can only see them on an angle. I'm going to see if I can polish them out. I googled it and saw that a normal kitchen sponge with the one rough side gets them out, Also heard toothpaste and just ordered some aluminum polish.
Other people only noticed when I show them, and my GF said I have severe OCD because the nicks are so tiny. She is right. It's not really noticeable to anyone but me, but it's driving me insane!
graffixnyc said:
No scratches on the body, but like the guy before me I accidently dropped my phone into my pocket with keys, I got a couple small little nicks on the bezel but you can only see them on an angle. I'm going to see if I can polish them out. I googled it and saw that a normal kitchen sponge with the one rough side gets them out, Also heard toothpaste and just ordered some aluminum polish.
Other people only noticed when I show them, and my GF said I have severe OCD because the nicks are so tiny. She is right. It's not really noticeable to anyone but me, but it's driving me insane!
Click to expand...
Click to collapse
I'm the same way, thats why I'm asking. LOL
seh6183 said:
I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
Click to expand...
Click to collapse
I've been babying my one so I can't really comment, but
https://www.youtube.com/watch?v=_EWqPpYVE08
hopefully this will mean it's rather resilient
I'm going to go see if I can find some information about the durability of the black one over on the international forum.
Not looking so good for the black one so far, it seems they chip really easily near the top above the camera. So sad, because its so nice looking.
I think I've seen finish problems on every single One variant thats been released from HTC...
seh6183 said:
Not looking so good for the black one so far, it seems they chip really easily near the top above the camera. So sad, because its so nice looking.
I think I've seen finish problems on every single One variant thats been released from HTC...
Click to expand...
Click to collapse
Probably the same way it went with the black iphone 5
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Underground_XI said:
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Was that the silver or black one?
If the thing is going to looked chipped to hell in a month from normal use, I'll just return it now. My s3 started to chip the silver rim and I got rid of it immedaitely. I can't stand something that looks like crap for no reason whatsoever, actual damage is one thing but come on....
The iPhone 4 was a tank and was beautiful. Is this so much to ask from an android phone?
Underground_XI said:
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
If it's a dummy version, it's clearly made with less resilient materials. The dummy model at my local Walmart looks terrible while the real phone at my local AT&T store is flawless.
Sent from my iPad using Tapatalk HD
jtc276 said:
If it's a dummy version, it's clearly made with less resilient materials. The dummy model at my local Walmart looks terrible while the real phone at my local AT&T store is flawless.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Mock devices are identical except the internals. 99% of the time
Sent from my HTC One X using xda premium
CraigP17 said:
Mock devices are identical except the internals. 99% of the time
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This isn't one of those times. The buttons on the dummy phone are not usable, it's ridiculously light, and the feel is somewhat different. The real phone was sturdier and had functional buttons, of course. They were both set out on the same day in each store and the dummy looks terrible now while the real phone looks perfect. It's a pretty decent indicator of the dummy phone being made with cheaper materials.
Sent from my iPad using Tapatalk HD
jtc276 said:
This isn't one of those times. The buttons on the dummy phone are not usable, it's ridiculously light, and the feel is somewhat different. The real phone was sturdier and had functional buttons, of course. They were both set out on the same day in each store and the dummy looks terrible now while the real phone looks perfect. It's a pretty decent indicator of the dummy phone being made with cheaper materials.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
I don't know what store this was... But the retail location I was at, the mock was dead on accurate weight. Buttons obviously don't work on a fake device.
Sent from my HTC One X using xda premium
CraigP17 said:
I don't know what store this was... But the retail location I was at, the mock was dead on accurate weight. Buttons obviously don't work on a fake device.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I just don't believe that HTC would have spent the time to assemble a phone that isn't going to be functional since it apparently takes a lot of time to assemble the aluminum body for the HTC One.
Sent from my iPad using Tapatalk HD
No scratches on the aluminium surface but the beats audio red logo and writing have almost disappeared. White 'audio' writing still there.
I dropped my One on hardwood and it rolled over onto a brick ramp (I was at the entrance to a restaurant) and skidded down it on its back. There are some deep scratches on the back and scuffs, but it's okay. Definitely want to put a case on it if you plan on using it out on the street
seh6183 said:
I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
Click to expand...
Click to collapse
The matte finish wears off much more easily because the material was plastic. Microscopically, a matte finish is just an unpolished, jagged surface. Since it's plastic, it's not hard enough to be able to withstand the forces exerted on it when rubbed by your pocket/hand/table long enough so it gets polished over time (check out a computer mouse that's been used for a long time). This is completely different than scratching or chipping, which is a complete removal or deformation of the material. The nice thing about plastic is that because it's soft, it's much easier for hairline scratches to "heal" over time as the surface gets rubbed on.
The aluminum back will definitely maintain the matte finish better than plastic because it is a harder material. Drawback is that since it's harder, it's also more brittle so it's more subject to chips/nicks and hairline scratches will stick around forever.
TL : DR Material properties are a *****. The matte finish (it's actually a bead blasted finish) will stick around for awhile as long as your hands/table/pockets aren't made of sandpaper or things harder than aluminum.
hi as many note 3 users know, the plastic side frame is easy to get damaged, i have few cracks and one line just under the main power button (not sure just facial or completely crack?)
so, how easy is to change and which one i have to buy ? - im quite noob in hardware sides.
Sure you can buy one on Ebay
I have the same problem, the silver plastic bezel is very fragile.
If you search in Ebay you can found the Bezel and some of them come with tools to turn this in a complete DIY.
Actually i found all the body for this phone in ebay, so you can turn your used and damaged note 3 into a "brand new" one.
Thanks 4 the info. Where did you find it. Could you please share the link?
Thx in advance
hey guys.here is a link for the bezel replacement Bezel On EBAY
i want to tell you that it's not that easy to change it as you need to move the lcd screen from the one bezel to the other one.
there is glue between the lcd and the bezel so you need to warm it and remove it really carefully.i did the process yesterday on my note 3 and it was a pain in the a$$ so i have to tell you to be carefull before any move you re going to do.
Any link for Indian note 3?
Sent from my SM-N900 using XDA Free mobile app
I considered doing this, as I was given a note 3 a while back, but the bezel is beat to hell and the screen had a minor crack. I should've replaced both at the same time, but the small crack turned into a large one and needed immediate attention It's covered by a case now anyway though, so it's not much of an issue anymore.
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Its a tough job!!!
got my Note 3 as a gift from a friend who cracked it. I replaced the entire Display (along with frame)
and 3 days later I dropped it and got scratches in the frame.
so I decided to buy a frame and fix but its really a tough job.
so I got a bumper for 3$ and job done
I have installed one of those here http://www.ebay.com/itm/Thin-Aluminum-Metal-Bumper-Case-Cover-For-Samsung-Galaxy-Note-3-III-N9000-N9005/151251742076?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D31478%26meid%3D341538ef5e9d4d6da3228a5f902e8cf1%26pid%3D100033%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26sd%3D151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
thanks i thought i saw same one for bit less than that, will browse ebay later.
maskerwsk said:
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Click to expand...
Click to collapse
Photos plz
Up! I'm interested too.
yes i just remember i have some sand paper at home please post photo and detailed instructions... cheers
rockbastard said:
I have installed one of those here http://www.ebay.com/itm/Thin-Alumin...id=100033&rk=1&rkt=4&mehot=pp&sd=151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
Click to expand...
Click to collapse
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
triad88 said:
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
Click to expand...
Click to collapse
I haven't noticed any drop in reception at all
rockbastard said:
I haven't noticed any drop in reception at all
Click to expand...
Click to collapse
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Mr.Ultimate said:
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Click to expand...
Click to collapse
you have a lot of cases!
erwinsie said:
you have a lot of cases!
Click to expand...
Click to collapse
little too many ... beware that those wooden cases are the coolest thing your phone can get but if you do drop your phone they crack and break apart sometimes... not always though but alot alot sooner than any plastic case would and thats a heartbreaking thing because there not exactly cheap case, but hey - how often does someones phone feels and smells like real fresh quality piece of wood? I like them wooden ones very much even if they crack and put some tax on my pocket at the end of the day its almost like your personal signature of style ... besides, its always warm to touch and zero signal interference
PS: lots more were thrown out many months ago, especially all those metalized ones, no use to me nor could I offer them to anyone I knew who had note 3 due to what they are
When my display was damaged, it got repaired, not only the glass, but the whole display including the bezel, it was 1 piece.. I guess it's very hard to replace only the bezel
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.