I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
in pouch all the time, no chance to scratch it
Carry mine naked (the phone not me) and not a single mark on it yet. It may be to soon to tell but so far so good..
I panicked when I realized that my keys were in the same pocket as my phone. But not a scratch yet.
Sent from my HTC One using xda premium
No scratches on the body, but like the guy before me I accidently dropped my phone into my pocket with keys, I got a couple small little nicks on the bezel but you can only see them on an angle. I'm going to see if I can polish them out. I googled it and saw that a normal kitchen sponge with the one rough side gets them out, Also heard toothpaste and just ordered some aluminum polish.
Other people only noticed when I show them, and my GF said I have severe OCD because the nicks are so tiny. She is right. It's not really noticeable to anyone but me, but it's driving me insane!
graffixnyc said:
No scratches on the body, but like the guy before me I accidently dropped my phone into my pocket with keys, I got a couple small little nicks on the bezel but you can only see them on an angle. I'm going to see if I can polish them out. I googled it and saw that a normal kitchen sponge with the one rough side gets them out, Also heard toothpaste and just ordered some aluminum polish.
Other people only noticed when I show them, and my GF said I have severe OCD because the nicks are so tiny. She is right. It's not really noticeable to anyone but me, but it's driving me insane!
Click to expand...
Click to collapse
I'm the same way, thats why I'm asking. LOL
seh6183 said:
I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
Click to expand...
Click to collapse
I've been babying my one so I can't really comment, but
https://www.youtube.com/watch?v=_EWqPpYVE08
hopefully this will mean it's rather resilient
I'm going to go see if I can find some information about the durability of the black one over on the international forum.
Not looking so good for the black one so far, it seems they chip really easily near the top above the camera. So sad, because its so nice looking.
I think I've seen finish problems on every single One variant thats been released from HTC...
seh6183 said:
Not looking so good for the black one so far, it seems they chip really easily near the top above the camera. So sad, because its so nice looking.
I think I've seen finish problems on every single One variant thats been released from HTC...
Click to expand...
Click to collapse
Probably the same way it went with the black iphone 5
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Underground_XI said:
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Was that the silver or black one?
If the thing is going to looked chipped to hell in a month from normal use, I'll just return it now. My s3 started to chip the silver rim and I got rid of it immedaitely. I can't stand something that looks like crap for no reason whatsoever, actual damage is one thing but come on....
The iPhone 4 was a tank and was beautiful. Is this so much to ask from an android phone?
Underground_XI said:
Judging from the one at best buy I would not say it is holding well.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
If it's a dummy version, it's clearly made with less resilient materials. The dummy model at my local Walmart looks terrible while the real phone at my local AT&T store is flawless.
Sent from my iPad using Tapatalk HD
jtc276 said:
If it's a dummy version, it's clearly made with less resilient materials. The dummy model at my local Walmart looks terrible while the real phone at my local AT&T store is flawless.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Mock devices are identical except the internals. 99% of the time
Sent from my HTC One X using xda premium
CraigP17 said:
Mock devices are identical except the internals. 99% of the time
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This isn't one of those times. The buttons on the dummy phone are not usable, it's ridiculously light, and the feel is somewhat different. The real phone was sturdier and had functional buttons, of course. They were both set out on the same day in each store and the dummy looks terrible now while the real phone looks perfect. It's a pretty decent indicator of the dummy phone being made with cheaper materials.
Sent from my iPad using Tapatalk HD
jtc276 said:
This isn't one of those times. The buttons on the dummy phone are not usable, it's ridiculously light, and the feel is somewhat different. The real phone was sturdier and had functional buttons, of course. They were both set out on the same day in each store and the dummy looks terrible now while the real phone looks perfect. It's a pretty decent indicator of the dummy phone being made with cheaper materials.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
I don't know what store this was... But the retail location I was at, the mock was dead on accurate weight. Buttons obviously don't work on a fake device.
Sent from my HTC One X using xda premium
CraigP17 said:
I don't know what store this was... But the retail location I was at, the mock was dead on accurate weight. Buttons obviously don't work on a fake device.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I just don't believe that HTC would have spent the time to assemble a phone that isn't going to be functional since it apparently takes a lot of time to assemble the aluminum body for the HTC One.
Sent from my iPad using Tapatalk HD
No scratches on the aluminium surface but the beats audio red logo and writing have almost disappeared. White 'audio' writing still there.
I dropped my One on hardwood and it rolled over onto a brick ramp (I was at the entrance to a restaurant) and skidded down it on its back. There are some deep scratches on the back and scuffs, but it's okay. Definitely want to put a case on it if you plan on using it out on the street
seh6183 said:
I was very disappointed to see the matte finish wear off after only a few weeks on my HTC one x. With this one I'm thinking that the back may be a scratch magnet. Anyone have significant scratching on the back yet?
Click to expand...
Click to collapse
The matte finish wears off much more easily because the material was plastic. Microscopically, a matte finish is just an unpolished, jagged surface. Since it's plastic, it's not hard enough to be able to withstand the forces exerted on it when rubbed by your pocket/hand/table long enough so it gets polished over time (check out a computer mouse that's been used for a long time). This is completely different than scratching or chipping, which is a complete removal or deformation of the material. The nice thing about plastic is that because it's soft, it's much easier for hairline scratches to "heal" over time as the surface gets rubbed on.
The aluminum back will definitely maintain the matte finish better than plastic because it is a harder material. Drawback is that since it's harder, it's also more brittle so it's more subject to chips/nicks and hairline scratches will stick around forever.
TL : DR Material properties are a *****. The matte finish (it's actually a bead blasted finish) will stick around for awhile as long as your hands/table/pockets aren't made of sandpaper or things harder than aluminum.
Related
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Got my new Xperia S today, and so far loving it.
What are other owners finding the build quality like?
Might seems reasonable, the only niggle I have is the rear battery cover. The top edge is sitting slightly proud, in the centre above the camera lens hole, but it is all flush around all the other 3 sides (and it is correctly fitted in place). Its not massive but noticeable.
This leads to a creaking when you hold the rear. Worried it might get worse over time.
Anyone else's like mine, or are your's flush at the top?
Cheers
David
floatlite said:
Got my new Xperia S today, and so far loving it.
What are other owners finding the build quality like?
Might seems reasonable, the only niggle I have is the rear battery cover. The top edge is sitting slightly proud, in the centre above the camera lens hole, but it is all flush around all the other 3 sides (and it is correctly fitted in place). Its not massive but noticeable.
This leads to a creaking when you hold the rear. Worried it might get worse over time.
Anyone else's like mine, or are your's flush at the top?
Cheers
David
Click to expand...
Click to collapse
Well I don't have that on my phone actually i think the build is great
Build quality is great. Nice and weighty feels good when holding the phone.
floatlite said:
Got my new Xperia S today, and so far loving it.
What are other owners finding the build quality like?
Might seems reasonable, the only niggle I have is the rear battery cover. The top edge is sitting slightly proud, in the centre above the camera lens hole, but it is all flush around all the other 3 sides (and it is correctly fitted in place). Its not massive but noticeable.
This leads to a creaking when you hold the rear. Worried it might get worse over time.
Anyone else's like mine, or are your's flush at the top?
Cheers
David
Click to expand...
Click to collapse
Same here, tiny little bit, just doesn't sit as nice as the other sides. Also noticed the black scuffs really easily.
Build quality is excellent..........feels good to hold it..........
My only complaint is the flaps for the USB and hdmi port.
It takes real pain to close them once they are opened.
bustervic said:
Also noticed the black scuffs really easily.
Click to expand...
Click to collapse
Is it the black or white you have?
The clue is in the remark "the BLACK scuffs easily"
Sent from my HTC HD2 using xda premium
eddyedwards007 said:
The clue is in the remark "the BLACK scuffs easily"
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Was only asking.
dibdin said:
Was only asking.
Click to expand...
Click to collapse
Excellent use of sarcasm......to both of you
I agree in 100% Micro usb cover is difficult to close, but after a few try I made the system of closing it and it works fine. Materials and built quolity is outstanding !!! In my opinion Xperia S is best Sony's smartphone after SE made p910i...
Ha ha couldn't resist
@dibdin
Sorry mate only joking
Sent from my HTC HD2 using xda premium
When I took the phone out of the box, it was like... holding some kind of expensive new technology. I was thinking myself: "Don't you f...ing drop it".
Coming from a iPhone its slightly disappointing. If the htc one s was out I think I would have gone for that instead knowing the camera would be not as good. The htc is also quite alot slimmer.
I guess the xps has the spec and the htc the look in my opinion.
Sendt fra min LT26i med Tapatalk
I personally don't understand the apparent desire for slimmer phones, I've had the HD2 for the last two years and I upgraded to the sensation xe very briefly before I returned it to order the xperia s.
The sensation always felt like it was going to fall out of my hand,I was gripping onto it for dear life lol.
In all of the two years I had my HD2 I never dropped it once or felt like I was going to drop it, and even though I've only held onto a dummy xperia, that also feels comfortable in the hand, so for me it's the xperia build any day.
Still each to their own
Sent from my HTC HD2 using xda premium
eddyedwards007 said:
I personally don't understand the apparent desire for slimmer phones, I've had the HD2 for the last two years and I upgraded to the sensation xe very briefly before I returned it to order the xperia s.
The sensation always felt like it was going to fall out of my hand,I was gripping onto it for dear life lol.
In all of the two years I had my HD2 I never dropped it once or felt like I was going to drop it, and even though I've only held onto a dummy xperia, that also feels comfortable in the hand, so for me it's the xperia build any day.
Still each to their own
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
I agree entirely.To me, a phone should feel like a phone, not a piece of paper or a heavy credit card. I'm a butterfingers when it comes to phones, and if i drop it, I don't want it to snap in half.
My X10, which isn't a small phone, dropped a few times (give or take 10 or so), and lived, working perfectly. The Xperia S is a light phone for its size, but I love the size of it, and it works perfect with the size of my hands. It...feels like a phone should feel I guess. It may not be as durable as my X10, but it feels and looks perfect to me.
I'm a big sucker for the look and feel of a phone and tend to pick aesthetics over the actual specs. This phone has both for me
The only negative I have is indeed the port covers, but even then, I think it's something that I can adjust to over time.
But back on the phone size thing, it's not the size, it's how you use it!
I'm hearing some creeking underneath the the transparent bar. The Xperia black plastic. Hope it will last
benj0219 said:
Coming from a iPhone its slightly disappointing.
Sendt fra min LT26i med Tapatalk
Click to expand...
Click to collapse
LOL OK. I think the iPhone is one of the ugliest pones on the market. That small screen is an eyesore.
forzanerazzurri said:
LOL OK. I think the iPhone is one of the ugliest pones on the market. That small screen is an eyesore.
Click to expand...
Click to collapse
Maybe..,but my iPhone didn't had a plastic backcover that was slightly loose and sounding hollow when tapping on it. Design are subjective. Build quality isn't.
Sendt fra min LT26i med Tapatalk
Ps
A piece of cellophane tape inside the cover made a difference. Feels sturdier know.
benj0219 said:
Maybe..,but my iPhone didn't had a plastic backcover that was slightly loose and sounding hollow when tapping on it. Design are subjective. Build quality isn't.
Sendt fra min LT26i med Tapatalk
Click to expand...
Click to collapse
Plastic is lighter and more durable than glass. iPhones have always had their build quality issues as well dont dont give me that. If you drop a plastic phone with a shatter proof screen protector, chances are it wont break. Drop an iphone from a metre and it shatters into a million pieces. Front AND back. Youre right. Nothing subjective about that.
forzanerazzurri said:
Plastic is lighter and more durable than glass. iPhones have always had their build quality issues as well dont dont give me that. If you drop a plastic phone with a shatter proof screen protector, chances are it wont break. Drop an iphone from a metre and it shatters into a million pieces. Front AND back. Youre right. Nothing subjective about that.
Click to expand...
Click to collapse
I'm still waiting for my pre-ordered Xperia S and using my iPhone 4S. I guess I'm very careful with my gadgets but so far I have owned three iPhones (3G, 4, currently 4S) and all of them were kept mint through their life (without case, only using carrying pouch or in the pocket), my old 3G survived a couple of falls with just small marks on the silver bezel and the 4 survived its only fall without not even a mark or scar (granted it was like 2 feet).
Have you ever owned an iPhone? Even though one assume glass can break "more easily" I can tell you that unless you drop it more than 4-5 feet or you're unlucky (as with any phone) Gorilla Glass could probably withstand the fall with barely scuffs.
And what's better is that this Gorilla Glass won't easily scratch with daily use as many shiny plastics phones I've used (Samsung Galaxy S, Nexus S, Arc, etc.). One of the reason I'm sold on Xperia S is the matte plastics than I'm hoping feel more premium than others, and hopefully it won't disappoint me. I can tell you, apart from the iPhone the only other phone I liked its build quality was the HTC Nexus One, I loved how it felt in the hand! as much as I hated the Pentile screen...
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across this where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Gonna check out this link when i get on my pc. But sounds like a pretty good idea. Back when I had an ipod touch I hated the mirror backs because of how scratched up they got so i sanded it to look like stainless steel. Worked out perfect.
Although I don't like the shiny plastic look its not so bad I think I can live with it but if this ends up working good with the EVO maybe ill give it a shot but I don't think ill be the guinea pig haha
Sent from my PG86100 using xda premium
njgtechguy said:
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across hxxp://basejewellery.com/media/iphone/17.jpg (I haven't posted enough to allow links) where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Click to expand...
Click to collapse
Yes it also broke my heart to see that prototype, I was like..WHYYYYYYYYY!!!!
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Rodderik said:
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Click to expand...
Click to collapse
I thought so to but it does house the nfc chip so if anyone does make one it probably won't be cheap
Sent from my PG86100 using xda premium
It's not the NFC chip but just the antenna so third parties should be able to make a replacement part. The area near the lens worries me a bit though. Unless it looks better in person I think I will sand it.
Thanks for posting this. I was already planning to do this but now I have some instructions. For anyone who doesn't want to read the external posts, the process should go something like this:
1. Remove the shiny plastic back-cover
2. Acquire two small pieces of sand paper (one 800 grit and one 1200 grit)
3. Start by wet-sanding with the 800 grit sandpaper (use a forward-back motion)
4. Clean, inspect, and continue sanding until all shiny spots are gone
5. After you've gotten to all the tricky spots, let it dry, clean again with a soft cloth, and check out the results. This will produce a very dull finish.
5. If you would prefer a more polished finish, switch to the 1200 grit sandpaper and carefully re-sand the entire surface
6. Post pictures on xda.
I'm sure there will be third parties making backings. It'd be an easy way to make money too, if anyone is keeping track of this idea. I for one love the two-toned look.
I despise the two-tone look. I wish I'd never seen the AT&T One X in white. makes me hate the looks of the back of this phone that much more. If I get one, I'll be doing this or painting the back or something to make it look better.
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
njgtechguy said:
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
Click to expand...
Click to collapse
Yes, coarse paper first (800) then the finer paper (1200), I would test it out first. and don't forget this should be a wet sand with water as a lubricant.
I wanted to put in a request to Seidio to make some in a limited quantity but:
1. I wonder if they'll follow through?
2. Will it kill the signal advantage of the OEM's door?
3. Will it dissapoint (Still glossy, Loud, LOGO plastered, Weird etc.)?
That back peice is also part of my reasoning for wanting a white one.
i wonder if the plastic is a coated red like the original evo.
i thought it was neat with the original evo, you could sand to reveal red.
the back doesnt bother me, it'll be covered with a casing anyways.
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
flex360 said:
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
Click to expand...
Click to collapse
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
blkswanpres said:
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
Click to expand...
Click to collapse
This otherwise what's the point of putting a label on the.back
Sent from my PG86100 using xda premium
I usually skin my devices when I get em so my entire phone looks shiny like that lol. Hope to pick one up around Christmas
Sent from my SPH-D710 using xda premium
I don't understand why people would want to put cases on their phones. It's the same principle as buying an expensive couch and 'protecting' it with a plastic cover or buying an expensive car and then installing neoprene covers on the seats. This is an awesome, well built phone. It was designed to be used 'naked'. If it needed an additional layer of clothing, HTC would have designed it into the phone.
I feel that if people would just learn to take care of their phones, they could enjoy using them the way they were designed to be used.
Anyway... my 2 cents. You have a right to disagree and, if you buy the phone, it's yours to do with as you please. But, personally, I just can't stand to see a beautiful smart phone dressed in a purka (a phone burka).
I'm probably going to sand blast mine as soon as I get it. if its just polycarbonate it'll turn out nicely!
Just wait a month or so for the Chinese to make a nice top replace and post it on Ebay.
I generally don't like using cases on my phones but since I paid so much for my Xperia S I have been using one. I was curious how people who don't use cases on it have had their phone look like. How has the Xperia S survived the day to day normal wear and usage?
i dont have a case, cause i dont want to cover my beautiful XS..hehe..but i have a pouch for my XS.
mharckk said:
i dont have a case, cause i dont want to cover my beautiful XS..hehe..but i have a pouch for my XS.
Click to expand...
Click to collapse
What pouch.
Sent from hell using Xperia-S(atan)
I didn't use a case at first but a porch, and I hit a table with the lower left edge of my s (really soft, I didn't even drop it, I just put it down quickly) and it cracked and the paint peeled of. I drew over it with nail polish but I have been using a hard case ever since PLUS a porch.
And I still get a lot of scratches on the housing where the cut outs of my case are (mostly around the USB and headphone plugs, even though I treat my phone really carefully)
I wouldn't recommend using the phone without a case, it scratches way too easy.
Gesendet von meinem LT26i
Man this phone body is like a tin can
Me myself didn't like a case as well
I usually put my phone in the side pocket alongside with headset and it scratched. Hopefully i have it black so the scratch is not really visible.
And do not ever put your phone in the same pocket with your car keys. In my own experience it can dent your phone pretty bad
Sent from my Xperia S using xda premium
mrsatan said:
What pouch.
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
a cotton pouch (black), as protection of my XS when my phone is in my pocket.
Theonlyzii said:
Man this phone body is like a tin can
Me myself didn't like a case as well
I usually put my phone in the side pocket alongside with headset and it scratched. Hopefully i have it black so the scratch is not really visible.
And do not ever put your phone in the same pocket with your car keys. In my own experience it can dent your phone pretty bad
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
Lucky you, I have the white version, every scratch is visible :/
Nail polish all the way... In a year my complete phone will be painted in nail polish
Gesendet von meinem LT26i
I got a white Sony Xperia S a couple of days after the release. Never used any cases, I really hate 'em unless they add functionality.
I dropped my Xperia S only once on tiles, but it wasn't a very high drop. You can only see the scuffs if you look for them. They're really tiny.
Also, the only other scratch I have on my Xperia S is just my fault. I tried putting it in a tin case-like thing I had on a tripod which I had made for a smaller phone, but what I didn't realise was that the edges were very sharp.
My conclusion: Unless you like dropping your phone on the floor or scratch it on purpose with very sharp items, the Xperia S probably won't have any scratches at all. Even in white. The screen too is fine and the Sony (Ericsson) logo on the back isn't scratched either.
I've had mine for 5 months. It once dropped from a very low height facing down, so the screen kinda had a "scatter" from the side (volume up height) and the line goes until the very top of the USB port. It is only seeable at certain angles. There are also tiny scratches, but they are on the screen protector, so.... It once dropped from a slightly higher height than the first, but nothing happened.
"What really matters in this world, anyway?"
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
mrsatan said:
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
Click to expand...
Click to collapse
Mine is a white one. I don't have a single scratch (none that I can see, at least). And my screen "scratches" are like yours, but they are on the shatter proof that come already applied to the device.
"What really matters in this world, anyway?"
Felimenta97 said:
Mine is a white one. I don't have a single scratch (none that I can see, at least). And my screen "scratches" are like yours, but they are on the shatter proof that come already applied to the device.
"What really matters in this world, anyway?"
Click to expand...
Click to collapse
Yeah my screen scatches are literally almost impossible to see. I removed my shatter proof sheet the day I got the phone though.
mrsatan said:
I am not surprised that the white one has scratch problems. My buddy had a white HTC Hero with teflon coating and it looked pretty bad after a year or so.
My Xperia s has a thin case so the outside is mint. The screen has really minute scratches that all screens get that you can only see in certain light but no biggy. I never rock a screen protector. I would like to go case free but seeing peoples comments it makes me a bit nervous.
Click to expand...
Click to collapse
The Xperia S already has a screen protector on it from the factory. Going case free isn't a problem for me at all
I wouldn't remove this protector though. I read somewhere that it could make capacitive button sensitivity less.
I use some cheap pocket-like condom to keep my sola semi-safe.
Back in 2010 when I just bought a brand new HTC Desire I immediately wanted to protect it. I mean PROTECT IT.
I bought the Krusell Orbiflex thingie (was like uberexpensive) and was pretty happy with it until... after few months I realized that the screen was actually scratched by the case itself!
Then I sent over the HTC to the service point (because of broken camera or something). I repeated the procedure 5 times, so they swapped the unit into a new one.
I was happy and stuff and put the new, shiny device into the same case .
After few weeks my brand new HTC was scratched again in the very same spot beacuse of the case. AGAIN.
Maybe a little bit OT but kind of funny story it was .
kub4nek said:
I use some cheap pocket-like condom to keep my sola semi-safe.
Back in 2010 when I just bought a brand new HTC Desire I immediately wanted to protect it. I mean PROTECT IT.
I bought the Krusell Orbiflex thingie (was like uberexpensive) and was pretty happy with it until... after few months I realized that the screen was actually scratched by the case itself!
Then I sent over the HTC to the service point (because of broken camera or something). I repeated the procedure 5 times, so they swapped the unit into a new one.
I was happy and stuff and put the new, shiny device into the same case .
After few weeks my brand new HTC was scratched again in the very same spot beacuse of the case. AGAIN.
Maybe a little bit OT but kind of funny story it was .
Click to expand...
Click to collapse
In other words, you can be too careful
Hermantje said:
The Xperia S already has a screen protector on it from the factory. Going case free isn't a problem for me at all
I wouldn't remove this protector though. I read somewhere that it could make capacitive button sensitivity less.
Click to expand...
Click to collapse
No removing it makes it more sensitive. Trust me I have done it on 3 different Xperia S phones.
I use a nillkin case, but the top and bottom. Of the phone have so many scratches now. Hence, changed to a tpu Gel case instead.
Sent from my Nexus 7 using Tapatalk 2
wel, I don't really like the screen protector at all and even less a case.
I'm happy with a naked Xperia U, and whenever it get any hard scratches the phone will bet getting old already.
People don't stay with their phones for much longer anyway, so i don't think it's a good thing use cases...
My only scratch is off all places on the glass in the centre of he screen on my s3 after taking it into a repair shop without my case on. Was just glad to have my phone back so let the guy off with the scratch... normally use a otterbox defender case.
Sent from my GT-I9300 using xda premium
Azyx said:
People don't stay with their phones for much longer anyway, so i don't think it's a good thing use cases...
Click to expand...
Click to collapse
Resale value.
Great android themed cases for optimus g here,
http://www.cruzerlite.com/cases/lg/optimus-g/cruzerlite-androidified-a2-case-for-lg-optimus-g-at-t
Sent from my LG-E970 using XDA Premium HD app
I want a green one lol. I'll have to check out my diztronic one first before I order this one
Sent from my LG-E970 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2028879
Sent from my LG-E970 using Tapatalk
Just bought a red one thanks
jeff7790 said:
Just bought a red one thanks
Click to expand...
Click to collapse
no problem man i bought a white one with the android on the back pretty sweet
Going to get me a white one and black one. Plan was originally no case cause I sprung for BB's 2 year cover everything but lost or stolen plan
Sent from my LG-E970 using Tapatalk 2
Cutouts for all ports AND buttons... May have to get one to take advantage of the notifications.
Thx OP!
ratchetjaw said:
Going to get me a white one and black one. Plan was originally no case cause I sprung for BB's 2 year cover everything but lost or stolen plan
Sent from my LG-E970 using Tapatalk 2
Click to expand...
Click to collapse
could you post some pictures of them when you get them.... would like to see how the front looks since the web site don't show it THANKS
Ordered a teal one lol
Sent from my LG-E970 using Tapatalk 2
I ordered a Smoke one on Sunday and it arrived today. It is my first case ever for a phone so I can't comment too much. It seems to fit the well and has a pleasant touch feeling. It is a little more glossy than I expected. There is a slight lip around the front that should protect the screen a little from drops. All of the buttons, ports, microphones, and speaker have cutouts as described so it doesn't impede with the phone usage.
Patsfan123 said:
I ordered a Smoke one on Sunday and it arrived today. It is my first case ever for a phone so I can't comment too much. It seems to fit the well and has a pleasant touch feeling. It is a little more glossy than I expected. There is a slight lip around the front that should protect the screen a little from drops. All of the buttons, ports, microphones, and speaker have cutouts as described so it doesn't impede with the phone usage.
Click to expand...
Click to collapse
Does it look like the attached? The images on the site are different from the Sprint and AT&T versions, though when I called Cruzerlite, they said that the cases for AT&T are the translucent material as well. Image is of the Sprint version. I'll buy one anyway, as I am in meetings a lot and would like visibility of the notification light - hoping that I might actually catch the 1 in 30 second light bleep. Thx!
lennyquai said:
Does it look like the attached? The images on the site are different from the Sprint and AT&T versions, though when I called Cruzerlite, they said that the cases for AT&T are the translucent material as well. Image is of the Sprint version. I'll buy one anyway, as I am in meetings a lot and would like visibility of the notification light - hoping that I might actually catch the 1 in 30 second light bleep. Thx!
Click to expand...
Click to collapse
Yes basically. The hole around the camera and flash is smaller on the actual case, fitting it properly. The other big difference is that the rubber of the android guy is less translucent than the picture shows. You can't see the reflective finish through the android. You can however, see the AT&T logo through it.. You can see the finish through the non-android rubber. The cutouts for the buttons and ports are larger on the actual case. The buttons are recessed behind the case, not sticking out like in the picture. They still are easy to press but it will prevent accidental pushes in your pocket. Also its hard to see in that photo, but the left and right sides are ribbed and colored like the android.
I think that picture is a photoshop.
Patsfan123 said:
Yes basically. The hole around the camera and flash is smaller on the actual case, fitting it properly. The other big difference is that the rubber of the android guy is less translucent than the picture shows. You can't see the reflective finish through the android. You can however, see the AT&T logo through it.. You can see the finish through the non-android rubber. The cutouts for the buttons and ports are larger on the actual case. The buttons are recessed behind the case, not sticking out like in the picture. They still are easy to press but it will prevent accidental pushes in your pocket. Also its hard to see in that photo, but the left and right sides are ribbed and colored like the android.
I think that picture is a photoshop.
Click to expand...
Click to collapse
I appreciate the feedback and detail, Patsfan (go Pats - lived up there '76-'80)! The Diztronic case I have is great, though thought I'd pick up one of these to try out and have for a backup. The images for the AT&T version all look to be solid colors without any translucency. The person on the phone said they were, but she wasn't convincing.
Yes go Pats! I will try to take a picture but the only other camera I have is a nexus one. I also have a Diztronic case on order from Amazon.. Just waiting for it to ship.
Use redemption code "XDA" for a discount / Total with shipping: $14.10 as long as they are still on sale for $12.90.
tdnick said:
I want a green one lol. I'll have to check out my diztronic one first before I order this one
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
got my Diztronic saturday, its one of the nicest cases I've ever had, for any phone including my old iPhones.
I got the clear cruzerlite to try, after having gone caseless for a while and also trying one of the inexpensive HR wireless hard cases for a few weeks. I like it.
I want to add as little bulk as possible so I like the size of the cruzerlite. Especially compared to the HR wireless's huge lip around the front. I don't use a screen protector but the front lip wraps around so little that I don't think it would interfere with one. The texture of the android guy and the sides is nice.
I originally wrote that the fit wasn't great. It seemed to be offset to one side. I have since pulled the case of and put it back on starting with the other side, and it is nearly perfect now. The only real downside about the appearance, to me, is the way the material sticks to the glass back in spots (like a static window cling). But that's really minimal.
They're buy 2 get 1 free at Amazon but I only got the one (and bought some other stuff with it so shipping was free).
Bought the Black and Green one off of Amazon with Prime Shipping. That and my phone arrive Thursday.
Joecascio2000 said:
Use redemption code "XDA" for a discount / Total with shipping: $14.10 as long as they are still on sale for $12.90.
Click to expand...
Click to collapse
sucking price!
I bought this after using the Diztronic for a month. Made the phone feel more like the svelte hardware it should be, rather than a block. Protection does not deem to have suffered either.