I sanded down the back of my black chassis yesterday and then got bored at work today so I decided to sand down the front as well and make my LTEvo even more unique. I don't expect everyone to like it. Some will.....some won't. It's all good. I just enjoy modding things and I like having a truly one of a kind phone.
That having been said.....ONT TO THE PICS!!!
The Back!!
http://i48.photobucket.com/albums/f238/Concordium/photo31.jpg
The Front!!
http://i48.photobucket.com/albums/f238/Concordium/photo11.jpg
Looks pretty cool
cm10ed 3VO
I like the front gives it a classy look
I wouldnt do either personally, but the front looks better than the back imo
Looks good
Sent from my EVO using Xparent Blue Tapatalk 2
+1 to the front appeal.. Did you disassemble it or just sand as is? I've got a couple chips on the front side and based on your pix I'll probly tryn do the same..
Sent from my EVO using Tapatalk 2
scott_0 said:
I wouldnt do either personally, but the front looks better than the back imo
Click to expand...
Click to collapse
Well I did it for 2 reasons. 1, I love to mod things. So trying different things that I don't see anywhere was my inspiration. 2, I wanted to have a phone that was 100% unique. Between my software setup, theme, and external appearance I can honestly say that there is no other phone like mine in the world. Customizations! That's why I love Android as well!
KERKEDAGAIN said:
+1 to the front appeal.. Did you disassemble it or just sand as is? I've got a couple chips on the front side and based on your pix I'll probly tryn do the same..
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I disassembled the phone. There is no way that I would sand the front down with the digitizer still attached. I would've scratched the crap out of it. I like the silver accents on the front.
Also, I had black marks along the side of my phone (the trim on the side of the phone that is silver from the manufacturer). I just took some ultra fine grit sandpaper (400 - 600 grit) and sanded the side of the chassis down as well. It got rid of all of the scratches and knicks that I had in the chassis and smoothed it all out to a more uniform finish that matched the rest of the sanded phone. So after a while of using the phone you notice scratches and imperfections like that along the silver trim just sand it down a tad and it will look as good as new. :good:
Nicely done. I've been wanting to do something like that myself. I sanded down the top housing and painted it dark grey.
Where did you get those carbon fiber parts?
Some 2000 grit and then some Flitz metal polish would really set that off.
Really cool - I like all the metallic exposure!
That looks awesome! I like how you left the black htc letters on the back too. Nice job!
Sent from my EVO using xda premium
Thanks for the positive feedback guys.
falconoble said:
Nicely done. I've been wanting to do something like that myself. I sanded down the top housing and painted it dark grey.
Where did you get those carbon fiber parts?
Click to expand...
Click to collapse
I don't recall where I purchased it from. It's 3M di-noc carbon fiber vinyl. Wherever you find that stuff online it should be the same thing.
Looks Awesome!
However, I don't really want to do it to mine.... Lol I'd probably sand the screen by accident.
Va1ha1a said:
However, I don't really want to do it to mine.... Lol I'd probably sand the screen by accident.
Click to expand...
Click to collapse
I disassembled the phone in order to sand the chassis so that there was no risk of accidentally sanding the screen. Takes a minute or two to take the phone apart and you are ready to start sanding.
Related
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
I doubt there will ever be one. Unless you can talk joey3002 into making some again, but I think he's done with the covers.
You should wait and see what the phone looks like in person.
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
dozybolox13 said:
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
Click to expand...
Click to collapse
I agree 100%. I don't want to put a case on my EVO but definetly need to replace that ugly glossy black part. HTC should just have kept it matte black.
I'm going with an otterbox defender. I need a heavy duty case though. Have had an otterbox on my Eco 4 G since week two after it launched. Quality case.
I would pay $$$ to get one in CF..
Will
lacrossev said:
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
Click to expand...
Click to collapse
I want to do the same, but it looks like the camera lens part of it is going to be a PITA. Hopefully there will be third party covers available that will match the bottom half of the back.
URABUS0924 said:
I want to do the same, but it looks like the camera lens part of it is going to be a PITA.
Click to expand...
Click to collapse
That's what painters tape is for. If that cover is cheap enough to replace (in the unlikely event that I screw it up), I'll be going this route.
shellguy said:
I would pay $$$ to get one in CF..
Will
Click to expand...
Click to collapse
If the reason why that piece of the phone is plastic is due to the antenna placement, then replacing it with a cf piece may cause some signal attenuation as CF works as RF shielding for some applications, as i've read from RC model airplane forums where people discuss when and where to use CF in their planes.
also, NFC does not work without that specific cover in place. There are antennas and whatnot built into the thing. watch Phil Nickinsons quick walkthrough video on android central to see what I mean. he said that nfc definitely doesnt work without the cover on.
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Varekai said:
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Click to expand...
Click to collapse
Eh the issue that you will have is making sure that it is cut correctly.
Will
thats what that xo skins cf-look skin looks like. 3m di-noc would work pretty well as its thin enough to wrap around some basic curvatures like the one we have for the back cover. I've seen it wrapped around some crazy shapes without additional relief cuts or anything so it would be a good place to start if you don't want to pay the 15 bucks for a few pieces of that material pre-cut for the phone.
I have 2 small rolls of the CF Di-Noc in both silver and black. Will upload pics as soon as I can get it laid down. Now to decided which color.
Sent from my Nexus S 4G using xda premium
[HOW TO] Sanding Top Cover to Matte Black - DIY Instructions
Attempt this physical modification at your own risk. None of the individuals mentioned in this post, nor those who offer advice and opinions outside of this post, are responsible for any success/failure you may experience during your attempt.
Credit for this idea goes to boonxeven
Credit for this How-to write up goes to mrnamster. I simply made a standalone thread for it, added some process modifications, and added some pictures of the sanding job I did on my LTEvo.
**CLICK HERE** to view the original thread and please make sure to click the thanks button on boonxeven (OP) and mrnamster's (p. 4) posts.
Materials
600 grit or finer wet/dry sandpaper, cut and folded
1000 grit wet sandpaper, cut and folded (optional)
Water to unclog sandpaper. I used a spray bottle.
Lint-free cloth (for wiping)
Evo LTE cover, removed from phone
Knife, flathead screwdriver, or flat safepry tool. (optional Step)
Superglue(Optional step)
Procedure
Remove Camera lens from rear cover by breaking soft welds in the areas indicated in the pictures below. (optional step)
Pictures:
http://i48.photobucket.com/albums/f238/Concordium/IMAG0108B.jpg
Wet sandpaper
Lightly sand the cover using a small symmetrical circular motion. Start with the difficult areas first (around lens cover and on rounded edges). Do the sharp edges last as those sand quickly.
Use the folded end to sand around the lens cover. You can opt to press the lens cover off or tape it. It's metal so it's not likely to scratch.
Pictures:
http://i48.photobucket.com/albums/f238/Concordium/IMG_1123.jpg
http://i48.photobucket.com/albums/f238/Concordium/IMG_1120.jpg
Wipe with damp lint-free cloth, let dry and resand any spots if necessary.
Pictures:
http://i48.photobucket.com/albums/f238/Concordium/IMG_1119.jpg
***Remember, your cover is going to look horrible until you finish the job. So if you start getting nervous halfway through when your cover looks like the picture above then don't worry. It's normal until everything gets evened out.
Pictures:
http://i48.photobucket.com/albums/f238/Concordium/IMG_1128.jpg
Periodically dip the sandpaper in water if it starts to get clogged (usually turns white as it builds up).
(Optional Step) Use 1000 grit wet sandpaper to even up stroke marks and bring the entire rear cover to a nice, clean and even finish.
Rinse, clean, and dry rear cover before reinstalling.
Using superglue, reinstall camera lens cover onto phone rear cover. Superglue is used to ensure a solid fit. (optional step)
Notes
Take your time to lightly sand away the gloss finish of the paint by applying minimal pressure to the sandpaper. Periodically wipe, let dry and sand some more. If you sand too much it will dig into the plastic and turn light black/gray.
Do not try to rush this job. Using large strokes or trying to sand using rapid strokes will not make the job go any faster. If anything it will make it take longer due to the uneven and sloppy results such a method will yield. Patience is the key here. Slow and steady will yield the best results.
Avoid getting the inside of the cover wet. If you do happen to get it wet make sure to dry the entire inside, especially the metal contacts, thoroughly before reinstalling onto your phone.
A soft brush helps clean the nooks and crannies when done.
End Results:
boonxeven -
http://i48.photobucket.com/albums/f238/Concordium/Finished.jpg
mrnamster -
http://i48.photobucket.com/albums/f238/Concordium/evo-1.jpg
http://i48.photobucket.com/albums/f238/Concordium/evo-2.jpg
Concordium -
http://i48.photobucket.com/albums/f238/Concordium/IMG_1117-1.jpg
YoungCorruptionV2.0 -
http://i48.photobucket.com/albums/f238/Concordium/2012-06-13_15-11-14732.jpg
Evo_Shift -
http://img204.imageshack.us/img204/8508/p10706241.png
http://img140.imageshack.us/img140/1981/p10706271.png
http://img849.imageshack.us/img849/179/p1070625b.jpg
Nice info. I was about to do this but then I bought a TPU case instead.
I didn't think the matte and glossy finish was a big deal before, but now that I've seen this, the dual finish really looks odd. It's like someone broke the top part of the phone and then salvaged part of a case from a different phone.
The back should have been all matte.
Sent from my New School EVO LTE
DarkManX4lf said:
Nice info. I was about to do this but then I bought a TPU case instead.
Click to expand...
Click to collapse
lol me too
Should have come from HTC like this. Looks great!
Nice, but it was much simpler to buy a skin for it. I put carbon fiber on the back, and it looks amazing!
Hey looks cool, I want to try this but does anyone know where I can get more black plate covers just in case I mess up or something?
Sent from my EVO using XDA
I was about to do this until I bought Carbon Fiber wrap for my car and got an idea to put it on my phone. Went on XDA and realized a lot of people are already Carbon Fibering their top covers.
Anyone know a place to buy extra top covers?
Looks nice. I don't have the patience to do this. I'm hoping some matte covers will show up on ebay and actually fit well..
Looks nice, but I'm just gonna paint mine.
Evo_Shift said:
Looks nice. I don't have the patience to do this. I'm hoping some matte covers will show up on ebay and actually fit well..
Click to expand...
Click to collapse
It really doesn't take long to do at all. The sanding process takes a bit of common sense and a little bit of caution just like skinning your phone would.
eXplicit815 said:
Looks nice, but I'm just gonna paint mine.
Click to expand...
Click to collapse
Painting it will not look as good as sanding it or skinning it.
Sent from my EVO using XDA
Pop the red lens cover off! At least put it as an option in the notes! Makes it much easier, and zero percent chance of rubbing the red off.
Nice!
Sent from my EVO 4G LTE using XDA
I started this project yesterday but ran out if sand paper lol. Thank you for the guide
Sent from my EVO using Tapatalk 2
chase2000gt said:
Pop the red lens cover off! At least put it as an option in the notes! Makes it much easier, and zero percent chance of rubbing the red off.
Click to expand...
Click to collapse
Good idea. I didn't do this for mine, neither did the other guys, but I will add it to the process. Thanks!
YoungCorruptionV2.0 said:
I started this project yesterday but ran out if sand paper lol. Thank you for the guide
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
You ran out? I only used like a quarter of a sheet. As long as you clean the sandpaper regularly it should last quite a while.
Sent from my EVO using XDA
Concordium said:
You ran out? I only used like a quarter of a sheet. As long as you clean the sandpaper regularly it should last quite a while.
Sent from my EVO using XDA
Click to expand...
Click to collapse
I had very little/old sandpaper that was a couple of years old.
Sent from my EVO using Tapatalk 2
YoungCorruptionV2.0 said:
I had very little/old sandpaper that was a couple of years old.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Haha! Yeah that makes sense then. Post some pictures for us when you get it done. I'll add them to the OP.
Sent from my EVO using XDA
Concordium said:
Haha! Yeah that makes sense then. Post some pictures for us when you get it done. I'll add them to the OP.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Will do! Going to Lowe's today so I should have pictures up by tonight
Sent from my EVO using Tapatalk 2
Still need to get 1000 grit to finish it off but looks pretty good so far
Nice.
sent from a shining jewel 4g LTE
I'm working on a theory, please correct me if Im off base.
So, the brushed metal band around the side... appears to simply be a brushed portion of a larger piece of metal that represents the non-glass parts of the front and the lower half of the back.
I remember hearing that the Evo would have a uni-body design, but the all everyone talked about was how there were "soo many different kinds of plastic" and I just figured that the uni-body was just a rumor.
Many have seen this, but here is the tear-down video:
http://www.youtube.com/watch?v=LiKpHr8RLBs
It certainly looks like it does in fact have a single piece of metal making up a majority of the chassis. If thats true, then couldnt the same finishing technique be applied to the entire piece of metal? I havent looked to far into the actual brushing process, but at the very least, it would seem that someone could (again, in theory) sand off the powder coat black.
Here is a quick photoshop of what such a creature might look like: (attached)
Someone here has already sanded the soft touch finish of and he left it shiny. You could easily brush it from there.
i'll wait until lte backing parts show up on ebay, just in case i fugg up lol, or it looks ugly
lordcyrus said:
Someone here has already sanded the soft touch finish of and he left it shiny. You could easily brush it from there.
Click to expand...
Click to collapse
Indeed. I had seen people talking about sanding the glossy upper portion of the back, but hadnt seen that one.
Here is the post leaving it shiny:
http://forum.xda-developers.com/showthread.php?t=1683079
That's sexy. It makes it look more like the One X, which is a good thing.
Tapatalked from my shiny new HTC Evo LTE
I tried it out with one of mine-
Thanks for the idea, now I know which is which.
Sent from my EVO using Tapatalk 2
I wonder how it would look if you took the guts out and used some dads stripper on it... should leave the bare metal and get rid of all the red
bacidath said:
I wonder how it would look if you took the guts out and used some dads stripper on it... should leave the bare metal and get rid of all the red
Click to expand...
Click to collapse
Just don't use an acid bath. See what I did there?
jamieg71 said:
I tried it out with one of mine-
Thanks for the idea, now I know which is which.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
That's sick as ****,what I need to do it?
Sent from my EVO using xda premium
SilverZero said:
Just don't use an acid bath. See what I did there?
Click to expand...
Click to collapse
not many people get it... seems I have to give an explanation every day
snowboardkid503 said:
That's sick as ****,what I need to do it?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Some, 320, 400, 600, 800, 1000, & 1500 grit sandpaper, t5 torx screw, common plastic prying tool, 3M 4 mil double sided tape (to re-attach ffc lense speaker grill and buttons), elbow grease, and I'd suggest no more than 4 Budlight Platinums. For me any more than that and I lost interest.
Sent from my EVO using Tapatalk 2
jamieg71 said:
I tried it out with one of mine-
Click to expand...
Click to collapse
Ths looks bad ass, absolutely love the front.
My buddy does Auto Body & Paint, so I'm having him paint the upper shiny black cover to match the lower matte finish. He's charging me $20 to do it.
I buffed my shine off with fine steel wool (grade 00) , then buffed it over a final time with ultra fine steel wool (grade 0000). It's available at any Home Depot. It leaves you with a slick matte finish, no gloss, no excessive fingerprints.
I removed my back cover to do this, but its not necessary. It's actually quite easy to remove, almost like a removable back cover. I just pushed my fingernail in and got a gap, then proceeded around the edges popping each clip as I went... Alternatively you could just put tape on your camera lense to avoid scratching it.
retrospooty said:
I buffed my shine off with fine steel wool (grade 00) , then buffed it over a final time with ultra fine steel wool (grade 0000). It's available at any Home Depot. It leaves you with a slick matte finish, no gloss, no excessive fingerprints.
I removed my back cover to do this, but its not necessary. It's actually quite easy to remove, almost like a removable back cover. I just pushed my fingernail in and got a gap, then proceeded around the edges popping each clip as I went... Alternatively you could just put tape on your camera lense to avoid scratching it.
Click to expand...
Click to collapse
Do you have any pictures of the finished product? I'm curious.
jonathan3579 said:
Do you have any pictures of the finished product? I'm curious.
Click to expand...
Click to collapse
I'd love to see pictures of this as well, I just put on a slim flexible case and looks much better.
Pics
pics! sounds sweet
Pics or it didn't happen
Sent from my LG-D800 using Tapatalk 4
Wouldn't doing this mess up the screen printed logos on the back cover?
Sent from my LG-D800 using xda premium
pics pics pics pics pics pics
Hope this isn't a tease.... POIDH.
jonathan3579 said:
Do you have any pictures of the finished product? I'm curious.
Click to expand...
Click to collapse
I will post pics in a while. At work with no other camera ATM.
Remove cover n take pic
Sent from my Wildfire S A510e using xda app-developers app
bgaccord said:
Remove cover n take pic
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Was gonna say the same.
Very interested to see the end results!
Sent from my LG-D800 using Tapatalk 4
Sorry, I have my old GS3, so not great pics. I set it at 640x480 to avoid too large files. They do show its lighter, a charcoal color now vs. the original black and you can see its now matte and not shiney. A few small scratches at there, that I still need to rub out with the ultra fine steel wool.
Set 2 - new account here and it wont let me post more than once every 5 mins.
If I had thought about it, I would have done this with my S3 over a year ago... HATE THE SHINE...
The big take here, other than you can smack the shine off with steel wool, is that the back cover is easily removable, so I would assume 3rd party replacements with real soft touch back covers are a real possibility. I hate to have a case, but a new back cover with soft touch plastic ala Nexus 7 (either rubbery like '12 or soft like '13) would make this phone perfect... Whoot!
That looks pretty nice. It even removed Verizon's crap.
20degrees said:
That looks pretty nice. It even removed Verizon's crap.
Click to expand...
Click to collapse
Yes, I shed a little tear for that... heheh . Too bad I cant steel wool the Verizon logo off the front without making it look like crap.
Looks great. only thing I am concerned for is the design under the gloss of the ATT version. I am pretty sure the rear panels differ between carrier. I just ordered the Spigen Slim Armor...if I don't like the case, I will give this a go.
retrospooty said:
If I had thought about it, I would have done this with my S3 over a year ago... HATE THE SHINE...
The big take here, other than you can smack the shine off with steel wool, is that the back cover is easily removable, so I would assume 3rd party replacements with real soft touch back covers are a real possibility. I hate to have a case, but a new back cover with soft touch plastic ala Nexus 7 (either rubbery like '12 or soft like '13) would make this phone perfect... Whoot!
Click to expand...
Click to collapse
Spray Plasti-dip....
Sent from my LG Optimus G using xda app-developers app