Hi, I've messed up flashing my CID locked Qtek A9100 (HTC Wizard 100). Now I need it's original ROM to make it work again.
I can't find it on the Qtek website, I can't even find ,y device on their web.
Can anyone help me?
Thank you very very much.
Try Wizard_Love ROM, it works for me.
http://rapidshare.com/files/30881443/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
TruenoAE86 said:
Try Wizard_Love ROM, it works for me.
http://rapidshare.com/files/30881443/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Click to expand...
Click to collapse
Thanks! Thanks! Thanks!!!! You saved my head!!!
If there is anything I can help you some time just let me know.
Did you try it? Does it works for you....Great.
Yes, I tried. My Qtek is alive now thanks to you. I'm flashing WM6 again.
What ROM(WM6) are you using?
I'm tried HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade (http://ppcwarez.org/phpBB2/viewtopic.php?t=21608) which caused all my problems.
Then I installed X-Plore 2.0 WM6 (http://ppcwarez.org/phpBB2/viewtopic.php?t=21608). This one works fine, but I notice my Qtek very slow, even oveclocked, so I reinstalled WM5 (Wizard Love).
I can´t install any ROM on my 9100, I flash the 9100 and then it stays the same, I´ve try 4 or 5 ROM, then i test Underground_edition_Crossbow_ROM, and it was the end of it....
I think i´ll stay with my old WM5....
I think WM5 is the best option. Even I've seen some interesting things in WM6, it runs very slow on my A9100, so I'll keep WM5 for now.
hi i trhink i got alsmot same problem but my phone dont startup up just stay in tree colours window ... ( red - green - blue ) im gonna try the love think !
-
works thx alot ;D
love saved my qtek, but now i'm trying to change the first splash screen, I don't like the that love installed
In this post http://forum.xda-developers.com/showthread.php?t=262348&page=3&highlight=spanish+wizard I found the solution to all my problems, now my Qtek it's back in spanish and with the original splash screens.
Good for you!
mauri82 said:
In this post http://forum.xda-developers.com/showthread.php?t=262348&page=3&highlight=spanish+wizard I found the solution to all my problems, now my Qtek it's back in spanish and with the original splash screens.
Click to expand...
Click to collapse
Gee!!! That´s an over 300 post thread....! What is the OS which you ended up after your recovery? Perhaps is Qtek_9100_AKU2_21878_024711_ESN?
I´m looking for the Qtek 9100 AKU 2.2 2.26.17.1 ESN con el Radio 2.44.11, any one has it?
luiggi said:
Gee!!! That´s an over 300 post thread....! What is the OS which you ended up after your recovery? Perhaps is Qtek_9100_AKU2_21878_024711_ESN?
I´m looking for the Qtek 9100 AKU 2.2 2.26.17.1 ESN con el Radio 2.44.11, any one has it?
Click to expand...
Click to collapse
Sorry, in the hurry I forgot to mention which ROM I installed. Is ftp://jossma.myftp.org/QTEK Rom 2.18... by jossma.rar, it's the second reply in the third page.
Hi, I recently flashed with the love rom. Anyone install WM6 on a9100 HTC??!
machethier said:
Hi, I recently flashed with the love rom. Anyone install WM6 on a9100 HTC??!
Click to expand...
Click to collapse
Yeh! I flashed XDA Mobile 6 from mfrazzz using the shell tool- it's brill
I trying to flash, but don't install me the wm6 from mfrazzz The flash complete 100% then my a9100 restart and start a cleanup version of windows mobile 5, any suggestion?
machethier said:
I trying to flash, but don't install me the wm6 from mfrazzz The flash complete 100% then my a9100 restart and start a cleanup version of windows mobile 5, any suggestion?
Click to expand...
Click to collapse
How did you go about Flashing? What did you use?
BRICK
TruenoAE86 said:
Try Wizard_Love ROM, it works for me.
http://rapidshare.com/files/30881443/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Click to expand...
Click to collapse
This must be some kind of a joke, I tried flashing this ROM and my host computer REBOOTED during the flash update, while it was on 59%
Why would my computer reboot? I have UPS power, a stable system Windows XP Professional installed, I closed all other applications including Anti-virus software.
Either I'm extremely unlucky (could happen...), or the italian program that came with that ROM purposely bricked my wizard by rebooting or executing some invalid instruction.
Related
Hi all,
First post here - I've been lurking for a while now.
Is there a "best" wm6 ROM for the O2 XDA Mini S Please?
I'm a bit confused by the names of the ROMs
I have:
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.21.4.1
Should I use shelltool to flash?
Many thanks
NTB
8o)
Yes you should cuz you have a G4 device..
you can see here whats best rom for your wizard
http://forum.xda-developers.com/showthread.php?t=295777
Thanks for the reply. Can you tell me which one is closest to "standard" please? I just want to try wm6 out and maybe try one one of the tweaked versions later.
Thanks
I've just installed 'Windows Mobile Crossbow Most Beautiful Edition' on my XDA, Much better than the standard O2 Rom and pretty standard looking imo, has some nice extras thrown in but overall pretty clean. My IPL/SPL are identical to yours. Just use Shelltool and you'll be fine.
Dont worry if it doesnt work first time, it shouldnt cause any problems to just reflash it. Worse comes to worse you can always flash back to the O2 rom, although I wouldnt recommend it, Wizard Love rom is quite nice.
Find download links for Windows Mobile Crossbow Most Beautiful Edition and Wizard Love that they mention in the Shelltool thread, then you're set even if you have a mishap.
I did mine over the weekend, same IPL/SPL/Radio as you. I flashed with PdaViet4 using the Shelltools method.
WM6 Most Beautiful ROM
Firstly, great site and a veritable mine of information, almost too much. A quick question since I'm kinda a newbie.
I currently have an unlocked G4 XDA Mini S, with Wizard Love on it. I'd like to try WM6 and Most Beautiful as most folks recommend it. I tried flashing it last night using the shell tool, but I was unsuccessful. So I was just wondering, can I just install Most Beautiful directly or do I have to use the shell tool? I think I have the new ROM update installer (is there a way I can check this?) and I'd like to try it directly.
Thanks for your advice.
I got it to work anyway, using the shell tool. I just removed the miniSD card and turned off the radio (ooops, should have done that before!) and hey presto. It's on and looks great.
No phonepad text entry method though . Must see if I can add it...
ntblade said:
Thanks for the reply. Can you tell me which one is closest to "standard" please? I just want to try wm6 out and maybe try one one of the tweaked versions later.
Thanks
Click to expand...
Click to collapse
tell me which radio version do u want to use?whats ur ipl&spl?did ur device is cid unlocked?which rom do u wnt to use? give me the details i'll make for u?
where can i dnld wm6 for xda min s - G4?
[where can I download it ?
Please advise me
Thanks
KArimsha
WM6 Most Beautiful Edition for G4 DnLd?
Ive been searching for arround a couple of months for this WM6 for O2 xda Mini S (G4) and I failed to reach a link or a file , Please if any of those who download it can guide me I would be greatful , Pls send me on [email protected]
Thanx a million
Karimsha
ohhhhhhhh
shell toll mthod its damadge the phone i make it but it stuck on o2
hi everybody,
my latest rom was Transformer 1.1 but now i'm hungry again and i want to flash a new version.
but i was happy with the old way of flashing, now i'm confused. i don't want to flash hardSPL by now, so i thought the old method is still working, downgrad to wm5 and then using the RUU for wm6.
it flashed successfully (wm5, then wm6), but after reboot my prophet loads directly into the 3-color bootloader.
//edit: trying Cristal V5.1 atm
is there a possibilty to undo this problem? i cant use the old method because i only have a nk.nbf instead of a os.nb
any solutions for me? or is there no way around hardSPL?
thanks and a happy new year!
greetz
guro
guro said:
hi everybody,
my latest rom was Transformer 1.1 but now i'm hungry again and i want to flash a new version.
but i was happy with the old way of flashing, now i'm confused. i don't want to flash hardSPL by now, so i thought the old method is still working, downgrad to wm5 and then using the RUU for wm6.
it flashed successfully (wm5, then wm6), but after reboot my prophet loads directly into the 3-color bootloader.
//edit: trying Cristal V5.1 atm
is there a possibilty to undo this problem? i cant use the old method because i only have a nk.nbf instead of a os.nb
any solutions for me? or is there no way around hardSPL?
thanks and a happy new year!
greetz
guro
Click to expand...
Click to collapse
new way to flash wm6 make the flashing so easy & fast, why everybody lazy to read carefully and try??
tell you what:
just tried hma4 hardspl for g4, and it throws that error msg:
Initializing..cerun: failed to execute program (30123)
.
Click to expand...
Click to collapse
using PVTEMP from Mysterious 1.0
guro said:
tell you what:
just tried hma4 hardspl for g4, and it throws that error msg:
using PVTEMP from Mysterious 1.0
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=350033
guro said:
hi everybody,
my latest rom was Transformer 1.1 but now i'm hungry again and i want to flash a new version.
but i was happy with the old way of flashing, now i'm confused. i don't want to flash hardSPL by now, so i thought the old method is still working, downgrad to wm5 and then using the RUU for wm6.
it flashed successfully (wm5, then wm6), but after reboot my prophet loads directly into the 3-color bootloader.
//edit: trying Cristal V5.1 atm
is there a possibilty to undo this problem? i cant use the old method because i only have a nk.nbf instead of a os.nb
any solutions for me? or is there no way around hardSPL?
thanks and a happy new year!
greetz
guro
Click to expand...
Click to collapse
you wont get big storage with old methode,.. Why will you use old methode, if the new methode ios much better?
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Hello,
here looking after these Rome.
-- Qtek 2.20.739 GER, NVID
flashe it easy and (should work)
search then you the following things
-- SoftSPL
-- HardSPL
when you now without the SPL change want another rom-tuned want (WM6.1) use SoftSPL
-- Root copy
-- SPL Play
-- White screen
now connect USB and the right Upgrade_RUU.exe start (G3 or G4)
then about 10 to 15 minutes and wait for the new rom is installed.
You do not want any flash before the SoftSPL you can run on the first white screen and flash HardSPL.
Then, only the need to update / upgrades.
Download HardSPL and SoftSPL:
SPL variants
Hi!
Try this rom http://files.mail.ru/HZUAH1
It is an original shipped rom. It TAKES A WHILE TO INSTALL,but it worked for me.
If you have not already upgraded your IPL to 2.20 than check your device type, G3 or G4 http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Next upgrade your IPL http://forum.xda-developers.com/showthread.php?t=315016
Now try some 6.1 roms.
It worked for me.
Hope this helps.
Daravong said:
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Click to expand...
Click to collapse
why didn't you read the sticky threads?
dioxda2 said:
why didn't you read the sticky threads?
Click to expand...
Click to collapse
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Daravong said:
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Click to expand...
Click to collapse
hardspl your device.
it should be work.
varanusvincent said:
hardspl your device.
it should be work.
Click to expand...
Click to collapse
Wow Varanusvincent You are da best. Now I can downgrade to original rom.
Thanks you very much
Hi all
I am new to this website and would like to update my NIKI100 HTC Touch Dual P5500 to WM6.1 - but I want to be able to revert back if there is a problem.
I have downloaded an OEM ROM RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe
Mine is currently WM6 Pro (Build 18128.0.4.4) and is an unlocked phone...
ROM: 1.31.710.13
ROM Date: 03/14/08
Radio Version: 1.58.21.23
Protocol Version: 25.65.30.04H
Firstly, is the ROM I downloaded the english one? I am in Australia, so will any English ROM work? Is the one I downloaded WM6.1 and how can I tell before installing?
Reading through the forum it appears I need to install hardspl prior to doing any changes - is that correct?
If the whole thing goes horribly wrong and the phone doesn't start, how do I get it back to a working ROM? I am fearful of having a broken phone and being unable to get it functioning again.
Sorry for all the noob questions, just want to know what I need to do before I start.
Thanks
DT
d_train said:
Hi all
I have downloaded an OEM ROM RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe
Mine is currently WM6 Pro (Build 18128.0.4.4) and is an unlocked phone...
Firstly, is the ROM I downloaded the english one?
Click to expand...
Click to collapse
WWE stands for World Wide English (not world wrestling entertainment)
Reading through the forum it appears I need to install hardspl prior to doing any changes - is that correct?
Click to expand...
Click to collapse
Good insurance to prevent the SPL from being overwritten accidentally. You'll need HardSPL 1.22 if you want to install later ROMs.
If the whole thing goes horribly wrong and the phone doesn't start, how do I get it back to a working ROM?
Click to expand...
Click to collapse
With HardSPL installed, turn off phone (eg take battery out and then replace it). Hold down camera button and turn phone back on. This will drop it into bootloader mode. You can connect it to your PC via a USB cable and flash another ROM.