I've been reading through these forums for a few days now and I can't seem to find what I'm looking for. Basically, I want to be able to listen to my 8125 through stereo bluetooth headphones. As I understand it I need to enable A2DP. I've seen a lot of topics on the G3 side of things but before I try anything I would like to confirm which ROM I need for a G4 to make this work.
I have the tools package and ruu_480 package that should build a new ROM while leaving the IPL/SPL alone in my CID-Locked 8125. So I think all I need is the .nb portion that enables A2DP. And, if I've read everything correctly, I should be able to use typho5 to extract the proper .nb piece I need for this from whatever ROM I eventually get.
So, the short version of this is: What ROM do I need to get to enable A2DP on my CID-Locked 8125 G4? And what piece of that ROM, specifically, do I need to include in a cooked ROM?
G4 CID LOCKED w/ A2DP
WM6 MB edition have A2DP included on ROM. I have it running on my 8125 CID locked.
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
so what is the difference between the zoa2dp.cab you have listed and the zoa2dp_113.cab I have installed already?
Does anyone know if this A2DP fix will work on Dopod 818?
You guys are awsome! thanks very much for your hard work.
Cingular 8125 with Jabra BT620s.
After applying the files gotten off this thread, Jabra works well with Cingular 8125, except that the audio occasionally drops out for a couple of seconds. Anyone know of a fix for this?
theeoriginal1 said:
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
Click to expand...
Click to collapse
TNT and NBD ROMs has the new updated A2DP stack from MS. Try these ROMs.
theeoriginal1 said:
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
Click to expand...
Click to collapse
You guys are awseome it worked fine on my cingular8125 just like a charm.
Thx somuch
2 years later and this still works like a charm. Thank you very much.
Updated A2DP stacks? Where?
new2city said:
TNT and NBD ROMs has the new updated A2DP stack from MS. Try these ROMs.
Click to expand...
Click to collapse
Are they included in all the latest ROMS? Any place where I can find them?
Also, I've noticed everyone tell me that my voice is not clear when I use my bluetooth handsfree (I've tried 2-3 of them, with same result). Am I missing something here?
Please guide me, any help is much appreciated. Please check my signature for my current updates.
Thanks in advance.
Related
heya, I noticed a whole lot of useless programs that I dont use from the ext. rom that ships with the cingular 8525..
I know from my previous phones I'm able to hardboot and when that message comes up.. something like "installing custom components in 3 seconds.." one would do a softreset and that installation shouldnt come up again right?
well I was wondering what cab files were needed so I can install only the needed ones.. ie mms/wifi setup files, etc.
Anyone know? Thanks!
Dunno if you ever got your answer, but I can guarantee you that when I get mine tomorrow, it's one of the first things on my list of things to do. I know that 90% of the crap that Cingular puts on there I have no need for..
If someone figures this out let us all know. i too wanna try to play around with some other ROM's to see which works best with my configuration.
I upgraded from a TyTN to the Cingular ROM
I did the reboot thing so that I did not get the "value-add" stuff from Cingular after I let it do its normal thing. What I found out was that if I did not do the reboot thing, the "value-add" stuff from Cingular changed the keyboard mapping so that I could not figure out what keys the special characters were on. When I hard setup again, I rebooted and the keyboard works great. The only thing is, you have to put in all the information in the connection menu.
There's 2 times that the 3 sec screen pops up.
Does the keymapping work correctly if you let the first one run and do the reset before the second one?
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
Do you have the before and after memory numbers by chance I would like to see them if you do?
the keyboard setup is done in the first 3 second customization.. those cabs are in the windows folder.. the 2nd customization is the cingular stuff from the ext rom
aadadams said:
Do you have the before and after memory numbers by chance I would like to see them if you do?
Click to expand...
Click to collapse
Sorry, I didn't see the exact before and after.
It looked like I gained a little over 1mb.
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
MilanoRex said:
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
Click to expand...
Click to collapse
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
saq said:
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Click to expand...
Click to collapse
That worked, thanks
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
What was the "other stuff" you had to self install? I am contemplating this procedure but am not sure if it gives me enough storage space to justify a hard reset and reinstall of everything?
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
war123 said:
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
Click to expand...
Click to collapse
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
khammo01 said:
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
Click to expand...
Click to collapse
Thank you very much for your information.
I also thought about that but currently I don't know how to unhinde/unlock then \Extended_Rom folder. I don't want my x01ht run Extent Rom installation due to my x01ht is newest and can not sim unlocked.
If someone have the cabs file in x01ht extended_rom folder, could please send?
Thank you
I install cabs file from extended rom and it works
See attached x01ht extrom (except update_h182.exe).
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
marktang said:
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
Click to expand...
Click to collapse
I only install the x01ht extend rom cab file and It's work. I think you can install again the cab files that sent by pof
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
marktang said:
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
Click to expand...
Click to collapse
You download the x01ht extrom that pof sent.
Extract it and copy the cab files to your phone, run the cab files in order like Config.txt file.
oh alrite will try that...thnx alot
I did a search for WOW HD in the forums and didn't see anything so I thought I'd ask. I updated the ROM last night and reinstalled the WOW HD and now it comes up as there's no driver loaded and it exits.
Anyone else having issues with this?
Try this:
http://forum.xda-developers.com/showthread.php?t=355913
didn't work on the mogul to enable SRS WOW HD, still comes up as the driver isn't loaded and exits. Yes, after soft reset.
But, thank you.
didn't work on the mogul to enable SRS WOW HD, still comes up as the driver isn't loaded and exits. Yes, after soft reset.
But, thank you.
Click to expand...
Click to collapse
Did you attempt to update the registry as it says?
i reinstalled it on 3.2.0 without a hitch...still works fine
note that there are two SRS WOW HD cabs on xdaforum
are u using it with bluetooth headphones?
SRS WOW HD still doesn't work on new official rom or test rom even with registry change. Any ideas? It also shuts off all volume (not vibrate) on the phone until it is removed. When launched it says that there is no srs driver loaded. Thanks for any help.
dunebuggydude11 said:
SRS WOW HD still doesn't work on new official rom or test rom even with registry change. Any ideas? It also shuts off all volume (not vibrate) on the phone until it is removed. When launched it says that there is no srs driver loaded. Thanks for any help.
Click to expand...
Click to collapse
works fine for me
-install .cab file
-softreset
-edit reg file so instead of what they have for "old driver" change that to wavedev.dll
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"OldDriver"="wavedev.dll"
"Dll"="WOWHD_ARM_WCE_PPC2005_Driver.dll"
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"Bass"=dword:00000000
"Treble"=dword:00000000
"AGC"=dword:00000000
"MicGain"=dword:00000027
"3DEff"=dword:00000000
"GainADC_ReceiverMIC_12h"=dword:00000037
"GainADC_HeadsetMIC_12h"=dword:0000002A
"GainADC_LoudSpkMIC_12h"=dword:00000037
"GainADC_BluetoothMIC_12h"=dword:00000021
"HPVol_PhoneCall_04h"=dword:00000004
"SPKVol_PhoneCall_02h_06h"=dword:00000003
"SPKVol_NotPhoneCall_02h_06h"=dword:00000000
"DACVol_0Ch"=dword:00000007
"Sysintr"=dword:00000019
"Priority256"=dword:0000003E
"Order"=dword:00000001
"Index"=dword:00000001
"Prefix"="WAV"
Click to expand...
Click to collapse
-import reg file
-soft reset
hmmmm
gc14 said:
Did you attempt to update the registry as it says?
Click to expand...
Click to collapse
=
peepeesea said:
-edit reg file so instead of what they have for "old driver" change that to wavedev.dll
Click to expand...
Click to collapse
?
yea if you read the thread its pretty easy to figure out. i think most people are just using the reg file that is provided with out editing it first. the "old driver" that is ref. in that reg file is not the same one on my device, so i did was change it and tuhduh!
still doesn't work. Maybe there is a difference between DCD's 3.2.0 and the Official sprint rom 3.56
The Mogul can't find ANY SRS WOW Driver for some reason. The sound works fine however if the DLL is changed back to wavedev.dll otherwise it is muted always.
dunebuggydude11 said:
still doesn't work. Maybe there is a difference between DCD's 3.2.0 and the Official sprint rom 3.56
Click to expand...
Click to collapse
yeah maybe a different driver... uninstall it, soft reset then see what the driver is that shows up under HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev, then put that diver in the old driver place in the reg file
nope, still didn't work. it said wavedev.dll and i replaced that once i soft resetted it. Unfortunately it still didn't work. It must be the sprint rom
there must be some other way to make it work because it still says the driver can't be loaded. I would imagine it has something to do with the registry since it supposedly works fine on the DCD 3.2.0 Rom.
If Possible, can someone try to figure out or give any ideas on what would be causing the problem. Thanks. I REALLY want to be able to use SRS WOW HD because it makes the music sound 1000 times better! Thanks.
I'd really like to get this working on my touch again, will try the reg edit
eXplicit815 said:
Try this:
http://forum.xda-developers.com/showthread.php?t=355913
Click to expand...
Click to collapse
read everything in that link, thats all i needed to know and it works for me
yeah, i just switched over to dcds 3.2.0 rom and now it works fine. It has to be something in the "Official" Sprint 3.56 ROM that is causing the problem
SRS WOW
Yea..I am running the newest Sprint ROM (leaked release) and have tried every different version. With it installed I get no sound at all or the file error message.
Hope someone much better at problem solving than me gets a minute to take a peek at it.
The sound is horrible without it.
For my Samsung Omnia SGH-i900
HI guy,
Should I do the same for my Samsung SGH-i900 WM6.1. After I load SRS WOWHD i had the same error, and I did try the steps to install SRS than soft reset than run the Wavedev.reg zip file but still no sound. May be is bcos I don't know hoe to do Reg edit, can someone teach me step by step in the wavedev.dll reg edit part? thank you all.
I have a T-Mobile Ameo with WM6 (T-Mobile NL) and GPS Photo is not working (Cannot initialize GPS service). Fortunately my friend has an original HTC with english WM6 ROM and his GPS Photo is working properly.
Anyone knows how I can dump his ROM, extract the required files and add them to my Ameo? I googled, but didn´t find any clues yet.
Thanks for any info!
marco1958 said:
I have a T-Mobile Ameo with WM6 (T-Mobile NL) and GPS Photo is not working (Cannot initialize GPS service). Fortunately my friend has an original HTC with english WM6 ROM and his GPS Photo is working properly.
Anyone knows how I can dump his ROM, extract the required files and add them to my Ameo? I googled, but didn´t find any clues yet.
Thanks for any info!
Click to expand...
Click to collapse
It will work but you need to change a registry entry first. Somewhere in this forum has that entry. Try searching for it and see if you can find it.
Reading is hard. I wrote I got the message "Cannot Initliaze GPS service", which implies I changed the registry and could select mode 9, GPS photo.
marco1958 said:
Reading is hard. I wrote I got the message "Cannot Initliaze GPS service", which implies I changed the registry and could select mode 9, GPS photo.
Click to expand...
Click to collapse
Exactly the same case here, but with Irus WM6.1 Full version.
See my thread at http://forum.xda-developers.com/showthread.php?t=405016.
If you do have another unit that's working, you might be able to save yourself the trouble of messing with the ROM kitchen. On the unit that's working, go to /Windows and copy gpsid_HTC.dll to a storage card. Then put the card in the unit that's not working and copy gpsid_HTC.dll to \Windows there. Do a soft reset and it should work.
Or put this application on it http://www.geoterrestrial.com/ which is better than the built in system with its work arounds. As it now sports VGA support its worth trying on the Athena devices - Mike
mikealder said:
Or put this application on it http://www.geoterrestrial.com/ which is better than the built in system with its work arounds. As it now sports VGA support its worth trying on the Athena devices - Mike
Click to expand...
Click to collapse
Tried. It is not working. It does not initialize GPS nither.
Too bad, still no luck
jsp91470 said:
See my thread at http://forum.xda-developers.com/showthread.php?t=405016.
If you do have another unit that's working, you might be able to save yourself the trouble of messing with the ROM kitchen. On the unit that's working, go to /Windows and copy gpsid_HTC.dll to a storage card. Then put the card in the unit that's not working and copy gpsid_HTC.dll to \Windows there. Do a soft reset and it should work.
Click to expand...
Click to collapse
Tried that, also picked up the posted gpsid_HTC.dll, but it doesn't work. I guess it's not as simple as it looks. I'm not giving up yet. I'm still looking for a way to extract the ROM from the HTC Advantage of my friend. He's running 6.0 now and GPS Photo is still working. However, I don't want to endanger his device, so I'm still gathering info to build up confidence
marco1958 said:
Tried that, also picked up the posted gpsid_HTC.dll, but it doesn't work. I guess it's not as simple as it looks. I'm not giving up yet. I'm still looking for a way to extract the ROM from the HTC Advantage of my friend. He's running 6.0 now and GPS Photo is still working. However, I don't want to endanger his device, so I'm still gathering info to build up confidence
Click to expand...
Click to collapse
You can find original HTC 6.0 WM on Athena WIKI.
http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=0&dl_id=538
It's for the Diamond, but assuming it works on the Raph, Da_G, can you work your magic and integrate whatever's needed from here into your kitchen(s)?
OEM_Misc.dll
Extracted Diamond_audioplayback.exe contents, verified _Setup.xml, Platformxxx.reg and CM_Entries.xml:
- No registry changes
- Attached file is copied to .\Windows folder on device
Place file in .\OEM\OEMDrivers if cooking in kitchen.
Cheers,
Thanks -- trying it in my own ROM now ...
hilaireg is way ahead of me
ill check it out when i get home from the hospital! sounds good
Super-newbie question: What did you use to extract it from the EXE?
@Da_G:
Figured your queue was full enough as it is
@Wordsmith9091:
I used WinRAR 3.3 (IZArc 3.81 couldn't open the .EXE). Once it was extracted, I had a look at _setup.XML as it contains the short-to-long filename conversion details.
I renamed the pertinent files (previous post) and had a look at the content in those to ensure that there were no special requirements.
I used IZArc 3.81 to .ZIP up the file so that it could be posted here.
Thanks -- I learn a new trick every time I come to this site
Just tried building my ROM with it, all seems well so far, though I havne't played enough audio to test yet ...
... but I lost the ability to set button assignments other than Button-1-hold in the buttons panel -- it's like the stock behavior. Is that also controlled by this DLL?
Edit: Never mind, I'm a moron, this issue had nothing to do with this DLL
I don't think so ... the Stock HTC ROM only included "Button 1" which drives me crazy.
I've got a task on my list to deal with that I soon as I'm done some other kitchen related stuff.
I'll post up - unless someone beats me to it - once I figure out how to get button mapping.
Cheers,
I can't be 100 percent sure it's what interfered with button mapping, but it's the only thing I can think of that i've done different between builds.
Since this fix only requires a single DLL copied to the \Windows folder, I was able to cab it up using ChainFire's DriverWiz tool, and install it. I stream music via A2DP during every car ride, so I'll be able to test this on my ride home. I'll attach the cab if anyone else wants to try it as well.
You make me proud Captain
Following your lead, I have attached a .ZIP that can be used in a kitchen; to use:
Extract the .ZIP to the PACKAGES folder.
Verify that the <GUID>'s on the .DSM don't collide with ones you are currently using.
Remove the OEM_MISC.DLL from the .\OEM\OEMDrivers folder.
Cook away.
Note:
Tested on Da_G's (ERAS2R/Me) 21042 kitchen.
HTH,
HTC Diamond Hotfix..
Many thanks Captain_Throwback for the CAB, am testing Music Player now. The HTC version will not install on the Orange Diamond says 'Not Compatible'.
... 25mins in..clean as a whistle!!
....3 albums in, job done.
Never mind on the button-mapping question. I realize what I did (I think). HAd nothing to do with this dll.
Any info you can pass my way?
hilaireg -- PMed you.
Well, I drove around for a bit after cooking this in and reflashing, and I still got some skips listening to music in Kinoma Play. Don't know if that's Kinoma's fault or if it's a symptom of the problem this is meant to address. I wasn't getting any skipping with the TF3D player even before applying this.
improvement?
I saw a noticeable improvement in the length of pauses in between my songs while streaming over A2DP (though it did get stuck on me after about 20 minutes). Its better than it was . . . I think. I don't know if there's really a scientific way to test this, really. Maybe the problem this is supposed to address isn't that at all. Maybe we need to find someone who actually KNOWS they have this problem, so we can see if the fix really helps.
Hotfix for Diamond..
I have a Diamond on the Orange Network with the stock HTC 1.93 ROM. It used to skip every 5 mins but after installing your CAB it is now perfect, not a glitch. I am a very happy bunny. Thanks for your work Captain..
looby said:
I have a Diamond on the Orange Network with the stock HTC 1.93 ROM. It used to skip every 5 mins but after installing your CAB it is now perfect, not a glitch. I am a very happy bunny. Thanks for your work Captain..
Click to expand...
Click to collapse
All I did was make the cab. Wordsmith found it, and hilaireg extracted it. Its a team effort. That's what a community is all about .
Captain_Throwback said:
All I did was make the cab. Wordsmith found it, and hilaireg extracted it. Its a team effort. That's what a community is all about .
Click to expand...
Click to collapse
And if he has a diamond, he could probably just install the hotfix directly from HTC
Wordsmith9091 said:
And if he has a diamond, he could probably just install the hotfix directly from HTC
Click to expand...
Click to collapse
He already tried that . . .
looby said:
Many thanks Captain_Throwback for the CAB, am testing Music Player now. The HTC version will not install on the Orange Diamond says 'Not Compatible'.
Click to expand...
Click to collapse