Trying to upgrade my hermes,
but after checking my device, I got error message, something
like this:
error 260, check your usb cable, device is not properly connected
(but it yes, because of successfuly syncing etc.)
I already have netcf 2.0 i 3.0 installed, I restarted
laptop and device...
what to do??
thx
gervasius said:
Trying to upgrade my hermes,
but after checking my device, I got error message, something
like this:
error 260, check your usb cable, device is not properly connected
(but it yes, because of successfuly syncing etc.)
I already have netcf 2.0 i 3.0 installed, I restarted
laptop and device...
what to do??
thx
Click to expand...
Click to collapse
try to flash a different rom
post your question here. Of course after you search for the answer in that thread.
You are using an old RUU with a new bootloader. Extract the NBH and use custom RUU.
but it happened when I tried to flash HardSPL... according to mrvanx guide.
I didn't brick my tytn, just cannot run upgrade. any upgrade...
if somebody has similar problem, pls what to do...
so... let the RUU push SSPL on your phone, do not put it manually in bootloader mode.
which RUU, pls? I'm trying to flash hardSPL according to mr.Vanx guide, with RUUwrapper, I have spl 1.04
I have rom 1.18.255.3 07/22/06 , and radio 1.03.03.10
gervasius said:
which RUU, pls? I'm trying to flash hardSPL according to mr.Vanx guide, with RUUwrapper, I have spl 1.04
I have rom 1.18.255.3 07/22/06 , and radio 1.03.03.10
Click to expand...
Click to collapse
Are you using the RUU at this link?
Related
Here is another new ROM from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular.
ROM Version: 1.34.502.1
ROM Date: 09/22/06
Radio: 1.16.00.00
Bootloader: 1.06
As always, download link on the wiki upgrading page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
If you have questions be sure to read the Hermes wiki first, specially the Upgrading FAQs.
Notes on this ROM:
* See the threads on the previous Cingular ROMs for upgrading issues such as enabling video calls, band selection tab, ExtROM customizations, PTT button, etc...
-v1.30
-v1.31
-Downgrading instructions
UPGRADING INSTRUCTIONS:
* People with bootloader <= 1.04 just follow the normal procedure (run RUU twice after invalid vender ID error).
* People with bootloader 1.06 (those who have flashed the cingular 1.31 rom) need to downgrade to bootloader 1.04 first:
1) Put your device in bootloader mode by holding the side Ok button and the power button and at the same time reset with the stylus.
2) Upgrade to a ROM matching your CID, that is a ROM from your vendor (TyTN owners use the TyTN rom, dopod owners the dopod rom, jasjam owners the imate rom, etc...). This will get you back to bootloader 1.04
3) Flash the new 1.34 ROM as usual (run RUU twice after invalid vender ID error).
Enjoy
Guys, i'm at work and still haven't had time to flash it on my Hermes, so the first flashing it please update the OS build and protocol version on the wiki. Thanks
Any chance that we have release notes for this ROM uploaded as well?
Thanks.
cant run the rom file, it said file corrupted. i downloaded twice, both time it said rom file is corrupted. please re upload the rom
Tried to flash from 1.31 to 1.34 - but I get error message ERROR [294] INVALID VENDER ID
Anyone had any luck flashing 1.34
Doesnt upgrade from 1.31 - just get an invalid vender id error...
EDIT: can't downgrade either using the bootloader method - seems like we are now stuck on this rom until a solution is found!
Have you tried to restart the falshing SW without touching the hermes and without disconnecting the USB?
You are supposed to do this a second time when you get this error
Eric
Eric Duprat said:
Have you tried to restart the falshing SW without touching the hermes and without disconnecting the USB?
You are supposed to do this a second time when you get this error
Eric
Click to expand...
Click to collapse
Yep - tried this with Dopod, Cingular 1.30, and HTC ROMs - all get the same invalid vender ID error...
tried that, but it is no help
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
netboy said:
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
Click to expand...
Click to collapse
ROM file is fine. Runs OK here - just cannot flash to a 1.31 device...
netboy said:
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
Click to expand...
Click to collapse
Clear your cache, rom file is OK, I checked the md5sum of it.
Same here - Invlid vendor ID.
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
It makes sense that a direct upgrade from 1.31 -> 1.34 will fail. However, a downgrade to the original TyTN ROM for users having a real TyTN (CID QTEK_001) followed by an upgrade to 1.34 should work. I believe TyTN owners have been reporting success at downgrading from 1.31 although this is mystifying too as one would expect that the bootloader version downgrade should prevent this also....
Sleuth255 said:
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
Click to expand...
Click to collapse
Its a Orange M3100 SIM unlocked (HERM100)
let me REBOOT my pc and try again.
i cleared my cache. still got erros. and said can not unpack, file is corrupted..
@people getting invalid vendor ID:
Please report:
- which device do you have: TyTN, Vario II, SPVM3100, DOPOD 838pro, etc...
- Your device CID: QTEK_001, CDL__001, O2___102, etc... can be checked by "info 2" bootloader command, leave blank if you don't know it.
- Current ROM on your device before trying to upgrade
- Bootloader version
Sleuth255 said:
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
It makes sense that a direct upgrade from 1.31 -> 1.34 will fail. However, a downgrade to the original TyTN ROM for users having a real TyTN (CID QTEK_001) followed by an upgrade to 1.34 should work. I believe TyTN owners have been reporting success at downgrading from 1.31 although this is mystifying too as one would expect that the bootloader version downgrade should prevent this also....
Click to expand...
Click to collapse
True - thinks this makes sense. As Orange haven't released an upgrade yet I can't test this out. Need someone that has a Dopod or TyTN to experiment...
I'm trying this now. I got the same invalid vendor ID (HTC TyTN, running 1.31), and now I'm flashing back to 1.18. This seems to be working, albeit very slowly. I'll keep you updated if I can upgrade from 1.18 - 1.34; the flash to 1.18 should take about 25 minutes.
For people on Cingular, does push to talk work on this rom? If not, then this is not the final rom.
I need help phone stuck in bootloader and its not registering the usb syn cable being attached I think i just need to set it to boot to os. Have HARD-SPL.
ok got usb working again but ruu says it can't find device. is that because its already because its already in bootloader?.
edit- did an info 8 in mtty and got this
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
EDIT- finally got home and was able to reflash os with sd card and phone works now.
but what did you do to be able to flash?
everytime I try to flash it enters the BL and hangs. Then it says it cannot update. I've got a 1.09 BL
thanks
Read here:
http://forum.xda-developers.com/showthread.php?t=286755
giving more data:
which bootloader version on your device?
1.09
which rom on your device?
1.35.255.2
which RUU are u using?
HTC WWE version
which rom are u trying to flash?
2.11.255.1
Bootloader 1.09 is not compatible with new RUU version inside HTC's 2.11.255.1 ROM.
If you just run the shipped exe file (without unpacking), it will first upgrade your bootloader to 1.11 using the old RUU, then launch the new RUU and flash your rom.
BTW, i suggest you to read the hardSPL thread before attempting to upgrade
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
ok, now that you have HardSPL-1.11 on your device, do this:
1. Use winrar to extract the contents of RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe
2. You will see a file named RUU_Inside.exe
3. Use winrar again to extract the contents of RUU_Inside.exe
4. Run the RUU you'll find here, with device in bootloader mode.
Keep in mind that this will overwrite HARD-Spl with the shipped 1.11 bootloader, if you don't want that, read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide
Well it worked!!! Thanks a lot!!!! any explanation for this? (i forgot to tell I was using vista)
But... eheheh now I found out http://forum.xda-developers.com/showthread.php?t=297849&page=2
and it happens the same.. when I run it... (after winraring the main file) it hangs on the BL! Damn!!!
Muster said:
(i forgot to tell I was using vista)
Click to expand...
Click to collapse
boh!
I know I know awfull mistake!!!
Why does this happens when I try to update? ANd why it worked the way you said it would?
Muster said:
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
Click to expand...
Click to collapse
uhh... it should say SPL-1.11.Oli
It did not!! It says now 1.11!!
when I tried the upgrade to WM6 it used it's own bootloader 1.09 Ds and it changed again. Is it possible that 1.09 BL is definitevely not working in my TyTN?
I got this phone a few days ago and I'm already on a modding spree.
Today, I upgraded to SPL-1.40.01ipro and also upgraded the radio to 1.38.00.10.
To continue my modding spree, I wanted to update to the new Cingular ROM (2.06.502.3). I downloaded the package and launced it. I went through the usual ROM upgrading steps (checkboxes, etc.). Finally, at the last screen (before the status bar) I clicked ok, and it popped up a message saying "Verifying PDA information, etc." The phone disconnected from ActiveSync (even quit the program), Windows made the disconnecting sound, and then it made the connecting sound, and my phone went into bootloader mode. It then stayed there until a window popped up on my monitor saying "Error [260]: Update Error".
I searched about Error 260 and all I came up with was program conflicts. I rebooted the computer and tried to exit pretty much every program. Do I not have enough space on the phone?
Anyone have any idea how I can fix this? I searched alot. Thanks
Edit: I am using WinXP Pro, so the Vista issue has no concern.
If it is a standard RUU updater provided by Cingular you need to disable USB connections in activesync first.
Using the customRUU updates provided here (all the WM6 builds and HardSPL...and radio) its the opposite, but try unticking "allow usb connections" in connection settings (in activesync on your pc).
I assume it's the standard RUU, as it does not say CustomRUU on the file.
Edit:
I am using this one:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Cingular English CWS__001 2.06.502.3 02/02/07 ?? 1.33.31.00 32.66.7020.10H 15671.3.3.0 3.3 1.09 108
Should I just do the Ext. ROM ones?
Also, wouldn't disabling the USB connection result in a connection error (since it's not "connected")?
By the way, your upgrade guides are excellent! They really helped with the radio and SPL update.
A few minutes ago, I tried the the SIM unlock/CID unlock .v3 and it does the same thing. Error [206].
justsignbythex said:
I assume it's the standard RUU, as it does not say CustomRUU on the file.
Edit:
I am using this one:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Cingular English CWS__001 2.06.502.3 02/02/07 ?? 1.33.31.00 32.66.7020.10H 15671.3.3.0 3.3 1.09 108
Should I just do the Ext. ROM ones?
Also, wouldn't disabling the USB connection result in a connection error (since it's not "connected")?
By the way, your upgrade guides are excellent! They really helped with the radio and SPL update.
Click to expand...
Click to collapse
I think i might have been confused with using the mtty program, never mind.
The reason your RUU will not work is because you have an upgraded SPL (HardSPL) on your device and it is not recognised by the operator RUU.
The procedure to flash the cingular ROM to your device is the same as in my WM5 Downgrade Guide.
(you might not understand this until youve read the guide)
Just package the OS,Extrom and splashscreens as in the guide and flash with the CustomRUU tool, you will be fine. (follow the guide its all in there). Just to add to that when you come to flashing the repackaged ROM (at the end of the guide) select the 'Autodetect' option when the flashing utility asks what SPL you have.
Thanks for the help so far!
I read another thread: http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
that if I update the ROM a certain way, I will not be able to upgrade the radio afterwards. Is this true for your WM5 downgrading guide? (I am upgrading to AKU3.3 by the way)
Just want to make sure before I do it.
justsignbythex said:
Thanks for the help so far!
I read another thread: http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
that if I update the ROM a certain way, I will not be able to upgrade the radio afterwards. Is this true for your WM5 downgrading guide? (I am upgrading to AKU3.3 by the way)
Just want to make sure before I do it.
Click to expand...
Click to collapse
You can change the radio without issue dude. Aslong as you have HardSPLv6 (1.40.olipro) then we will have no problem sorting you out.
The guide is awesome!
But when it comes to this window:
Follow the RUU instructions as usual to flash the WM5 ROM. Select 'Autodetect' when the RUU asks which SPL version you have.
when I select Autodetect it says it cannot query the device and it advises me to pick SSPL. Should I just do that? Activesync is running and connected.
justsignbythex said:
The guide is awesome!
But when it comes to this window:
Follow the RUU instructions as usual to flash the WM5 ROM. Select 'Autodetect' when the RUU asks which SPL version you have.
when I select Autodetect it says it cannot query the device and it advises me to pick SSPL. Should I just do that? Activesync is running and connected.
Click to expand...
Click to collapse
select the third option down, then tick hardspl. sometimes it doesnt detect correctly
Thanks alot! Your help has been indisposable.
It's currently flashing as we speak. Will update you as it's done.
It works great, thanks!
justsignbythex said:
It works great, thanks!
Click to expand...
Click to collapse
No probs dude
Might wanna give the threads on HardSPL, CustomRUU and maybe the (hermes) rom koch???
The info there is great for future releases of ROM (and also for the techniques used in my guide)
I have same problem, error 260. At same time, after final check. I have made my .nbh with this guide (from Original ROM 2.11.255.1 03/07/07 and 2.05.255.1 01/17/07 ).
I have tryed to update with that guide that I mentioned before on two different computers Win XP sp2 and Win 2000. I have ActiveSync 4.2 on PC and the phone is Vodafone v1605 (with only rom that it has) and I have updated bootloader to 1.40.olipro.
Does this RUUWrapper.exe work with this .nbh allso? I want to upgrade everything to newest, or should I? I didn't find userguide for RUUWrapper or when it should be used.
I also tryed to flash ROM with "ModifiedRUUUpdater-V2", it went little bit further, but it hanged in 0% with error 244
Error 260 continuted
hello
I had the same issue, Error: 260. I have a hermes TyTn, WM6. I have tried to follow the steps on the downgrade to WM5 but have some issues. There is a warning to do the HardSPL first because this would prevent the unit from being bricked, but i am doing this because I can't do the Hard SPL. Secondly the Hermes RomKoch by dutty can not be found at the link provided. please help!
Try this method:
First go to this mode:
http://rt002nf0.eresmas.net/TodoPDAs200/bootloader01.jpg
And finally run ruuwrapper. This helps me.
error 260
I am getting the same error 260 message when I try to upgrade as well. I read several threads with different solutions and none of them worked for me. The link in this forum pointing to the downgrade guide does not work. I've tried on 2 different Vista Ultimate machines with no success. The funny thing is, I upgraded one of my 8525s on one of these machines with no problem, but this new 8525 I received today isn't playing nice. Any suggestions would be greatly appreciated.
Thanks
Install Hard SPL V7, then use sd card method to install ROM.
Go to page 116, post 1160 on this thread - http://forum.xda-developers.com/showthread.php?t=296722
for sd card method for Hard SPL.
Just drop the steps using sspl.exe when flashing roms as you would now have Hard SPL installed.
You need a 2Gb or less sd card formatted FAT32 and make no spelling mistakes when renaming .nbh file to hermimg.nbh..
Cheers...
But how do I get the Hard SPL V7 installed. That is the version I was trying to install. I go through the steps and once my phone gets to the bootloader, it disconnects from the WMDC and then the error message. So I need to get past the Hard SPL V7 install first. Any ideas on that?
Thanks ultramag69
ultramag69 said:
Install Hard SPL V7.
Go to page 116, post 1160 on this thread - http://forum.xda-developers.com/showthread.php?t=296722
for sd card method for Hard SPL.
You need a 2Gb or less sd card formatted FAT32 and make no spelling mistakes when renaming .nbh file to hermimg.nbh..
Cheers...
Click to expand...
Click to collapse
As I said before
Thanks ultramag69 it worked. I appreciate your help. Do you also have a good link for the Windows Mobile 6 download?
Thanks again.
Dear All,
Could someone please tell me how to get the SPL back to original. Im planning to sell the phone and it basically needs to be completely as it were.
Thanks a million!
Kind Regards,
Henry
rakdoll said:
Dear All,
Could someone please tell me how to get the SPL back to original. Im planning to sell the phone and it basically needs to be completely as it were.
Thanks a million!
Kind Regards,
Henry
Click to expand...
Click to collapse
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Thanks to Walshieau, Todd_jg and Olipro for helping me out with this.
This guide will take you through downgrading the Bootloader (SPL) on your Hermes device
This guide assumes you already have flashed ROMs and Other components and you are familiar with the process.
NOTE: By downgrading your SPL version your device is more vulnerable to being permenantly bricked if a flash goes wrong, by following this guide through YOU accept responsibility for any problems faced due to this operation. As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
The downgrade will take the following steps, since HardSPL does not allow itself to be downgraded directly, nor does SSPL allow versions lower than 1.09 to be flashed.
The first step is to dowgrade to SPLversion 1.10.oli. Firstly download this archive and extract the files to a temporary folder, connect your device up via the USB port and allow it to connect to activesync. Run "RUUWrapper.exe" which will fire up the RUU program:
Select 'Force SSPL' and continue the flashing process as usual.
Allow the flashing process to take place and your device will reboot.
Now check the SPL has been changed by entering bootloader mode, press and hold the side ok and power buttons then insert the stylus into the hole in the bottom of the device. Your SPL version should now read "1.10.oli".
The next step is to download the SPL you wish to finally downgrade to:
SPL 1.04 (includes IPL 1.00)
SPL 1.06 (includes IPL 1.01)
Again extract the contents to a temporary folder and connect your device to activesync via USB. Run "RUUWrapper" in this new folder.
Select the RED OPTION, and TICK THE BOX.
Then flash as normal.
This will flash the final SPL version onto your device.
Verify your SPL version once this has completed by allowing the device to boot into windows Mobile and entering the bootloader as before.
Last Updated ( Sunday, 17 June 2007 )
Oszi said:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Thanks to Walshieau, Todd_jg and Olipro for helping me out with this.
Click to expand...
Click to collapse
And *that* is the reason we helped you, so that now you help others. One day, rakdoll will help someone else. That is why we are all here. Nicely done!
how do I do this without being able to get access to the OS? now that is a challenge, but its what i need to do :O
revert back
this is what i used to flash mine back to enable original rom to be installed ,so i could take phone back for warrany reasons
Korpse said:
how do I do this without being able to get access to the OS? now that is a challenge, but its what i need to do :O
Click to expand...
Click to collapse
Shouldn't need to access OS. You should be able to do it by putting it in BL mode... THEN plug it into the usb. Then start the updater.
Its 2.30.Olipro I need to downgrade from, and you cant overwrite olipro SPL's without using SSPL by des from inside the OS, I'm trying to find another way
Korpse said:
Its 2.30.Olipro I need to downgrade from, and you cant overwrite olipro SPL's without using SSPL by des from inside the OS, I'm trying to find another way
Click to expand...
Click to collapse
2.3 is similar to 2.1.
As MrVanx's guide points out, the key is to get from 2.1 down to Oli 1.1. That will work. His guide works - guarantee it.
todd_jg said:
2.3 is similar to 2.1.
As MrVanx's guide points out, the key is to get from 2.1 down to Oli 1.1. That will work. His guide works - guarantee it.
Click to expand...
Click to collapse
Thanks for the help, but MrVanx's guide uses SSPL by des (launched from inside the OS where I can't get to) to overwrite the 2.10.Olipro to get back to 1.10.Olipro, so that method wont work for me either
Korpse said:
Thanks for the help, but MrVanx's guide uses SSPL by des (launched from inside the OS where I can't get to) to overwrite the 2.10.Olipro to get back to 1.10.Olipro, so that method wont work for me either
Click to expand...
Click to collapse
Oh interesting. A nuance I hadn't picked up on. So, when using the Force using SSPL" option in the flashing utility, you must be able to access the Phone OS? That surprises me, I thought that the RUU utility would put it on the phone even in BL mode and execute it? Hmm... strange. I guess if it is an exe, it needs the OS to run, though. Sort of makes sense. Sorry about the misdirection.
todd_jg said:
2.3 is similar to 2.1.
As MrVanx's guide points out, the key is to get from 2.1 down to Oli 1.1. That will work. His guide works - guarantee it.
Click to expand...
Click to collapse
Hi,
I'm trying to downgrade to the original SPL (I'm trying to get hold of 2.03 but can't seem to find it), so am using 1.06. I've been able to downgrade to Oli1.10 from Oli2.10, but it won't go back to 1.06 from there, after the RUU says successfully completed the SPL is still the same.
Any ideas?
Cheers
downgrade phone for rogers warranty
Hi Guys,
I need to downgrade my phone as well for warranty purposes. Unfortunately Mrvanx's guide is offline at present. Can any one of you give little further detail about what I need to get back to orginal rom/radio/spl and bootloader. Or in shor to be able to send it back for warranty. I do have a new Rogers phone if that can be of any help.
It is from Rogers and currently my boot loader screen says following:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro
Under Device Information:
ROM version: FARIA.R-32
ROM date: 11/06/07
Radio version 1.54.07.00
Protocol Version 32.86u.7020.23H
ExtROM version: BIGSTORAGE
My replacement Rogers Phone has following:
HERM200
IPL-1.01
HERM200
SPL-1.11
Under Device Information:
ROM version: 1.34.631.14
ROM date: 04/17/07
Radio version 1.42.00.00
Protocol Version 32.75.7020.18H
Can anyone please tell me if it is even possible to do this downgrade.
Thanks
B.
why dont you just brick the phone if you are worried about them complaining over the boot loader version. If you cant access the phone i doubt they will be able (or even be bothered) to
Could you please let me know what you did? Did you downgrade To the original Rogers Radio and SPL ? Do you by any chance have all the original Rogers files (WM5, SPL, Radio,...)?
I am with Rogers too and just unlocked SIM (not CID) and installed WM6 (official HTC)
I am wondering how I could lock SIM again if I need to return the phone for Rogers warranty? or unlocking SIM does NOT void the Rogers warranty?
Thanks
Downgrade to SPL 1.11
Hi is anyone able to figure out how to downgrade from SPL 2.10 Olipro to SPL 1.11? I have tried Mr Vanx guide but at the end of the process, I get Error 260. Not sure if I am doing anything wrong.
Do I have to downgrade to SPL1.10 Olipro, before I downgrade to SPL 1.11?
Thanks
I am having some issues downgrading back to an original SPL. I've searched throughout the site and have found a lot of conflicting advice, although this thread seems to be the most relevant.
I started out the process with SPL: 2.10.Olipro
I downgraded to 1.10.oli.
This process was successful in that the bootloader screen now says that the SPL version is 1.10.oli.
Now, when I try to flash the OEM version of SPL, the phone asks the following question:
You would like to run jumpspl.exe
If I say yes, the screen goes gray and says load... but I end up with a 260 error.
I have tried turning off the usb connection in the active sync and starting from the bootloader as mentioned here, but that just ends up giving me a 264 error.
Any suggestions would be appreciated.
Cheers,
~Hat
* edit *
Post #5 from here fixed the issue.
Oszi said:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Thanks to Walshieau, Todd_jg and Olipro for helping me out with this.
This guide will take you through downgrading the Bootloader (SPL) on your Hermes device
<snip>
The downgrade will take the following steps, since HardSPL does not allow itself to be downgraded directly, nor does SSPL allow versions lower than 1.09 to be flashed.
The first step is to dowgrade to SPLversion 1.10.oli. Firstly download this archive and extract the files to a temporary folder, connect your device up via the USB port and allow it to connect to activesync. Run "RUUWrapper.exe" which will fire up the RUU program:
Select 'Force SSPL' and continue the flashing process as usual.
Allow the flashing process to take place and your device will reboot.
Now check the SPL has been changed by entering bootloader mode, press and hold the side ok and power buttons then insert the stylus into the hole in the bottom of the device. Your SPL version should now read "1.10.oli".
The next step is to download the SPL you wish to finally downgrade to:
SPL 1.04 (includes IPL 1.00)
SPL 1.06 (includes IPL 1.01)
Again extract the contents to a temporary folder and connect your device to activesync via USB. Run "RUUWrapper" in this new folder.
Select the RED OPTION, and TICK THE BOX.
Then flash as normal.
This will flash the final SPL version onto your device.
Verify your SPL version once this has completed by allowing the device to boot into windows Mobile and entering the bootloader as before.
Last Updated ( Sunday, 17 June 2007 )
Click to expand...
Click to collapse
Okay, Im back to 1.10oli, but how do I know if I need to go back to SPL 1.04 (includes IPL 1.00) or SPL 1.06 (includes IPL 1.01)?
OK people, please tell me you have looked at the updated guide right??
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=19&Itemid=27
Yes, but the choices are,
1.04
1.06
1.09
1.11
2.03
and I don't know how to tell which one is stock for my phone. I assume I need 1.04 since my bootloader says IPL-1.00 but I'm not sure because I know that used to say IPL-1.04, and since it appears that that can change for some reason, I want to make sure I get this right so I can get this waranteed. Im going to sell it on ebay and get the new HTC Fuze as soon as AT&T releases it.
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Read my specs. I have the same rom you do. should work
1.54.07.00 works
1.54.07.00 works well with vp3g's roms
If you can't be past error 262, here's an option:
Copy "SSPL-HERM.exe" to your miniSD then run it from the phone.
Your phone will reboot into the BL (tri-color screen)
Connect your phone via USB to your computer
When AS finally pops up, click cancel
Run RUUWrapper.exe and force SSPL
That should do it.
MontyV77 said:
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Click to expand...
Click to collapse
1.48.00.00