i want to boot and install new rom img withput pc connection..
10x
i've tried here: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
the device say: "not allow 00028002" and returns to bootloader mode
which rom version are you attempting to upgrade to?
what is your CID, which device are you using? do you have HardSPL on the device??
we need more info!
i'm working on Jasjam with WM5.
IPL-1.00
SPL-1.11
Can you not install via USB?
You really need HardSPL before you go ahead with any upgrades.
i can't... the device stuck on the windows welcome screen and therefore i can't connect via USB
sagivo said:
i can't... the device stuck on the windows welcome screen and therefore i can't connect via USB
Click to expand...
Click to collapse
can you put your device in the booloader? that should do the trick
i can. but now what?
10x again
Your best bet is to follow the instructions in the Unbricking Thread.
Related
i got problem when flash my pda.
i try flash O2 rom to T mobile...
i stuck at windows screen and try way in wiki also cant.
so i think i need dl something to flash it a boot loader.
which file should i dl?
me 1 is:
HERM100
IPL-1.01
SPL-1.09
ahdu said:
i got problem when flash my pda.
i stuck at windows screen and try way in wiki also cant.
so i think i need dl something to flash it a boot loader.
which file should i dl?
me 1 is:
HERM100
IPL-1.01
SPL-1.09
Click to expand...
Click to collapse
I would start with Hard SPL. Then read, read, read.
i had try the way in wiki also cant,
try force flash using hard SPL v7 also cant.
it fail when verifying the information on my hermes.
it say cannot connect to my pda.
but i already connect it and go in boot loader already.
Put your phone in bootloader and flash another ROM should be as simple as that. I have built many roms and some have gotten stuck at the windows screen so i just flash a nother working rom and I'm good to go.
OFCOURSE you should all ready have SPL7 on your phone since thats the only way to flash these days all the cool people are doing it!
austinsnyc said:
Put your phone in bootloader and flash another ROM should be as simple as that. I have built many roms and some have gotten stuck at the windows screen so i just flash a nother working rom and I'm good to go.
OFCOURSE you should all ready have SPL7 on your phone since thats the only way to flash these days all the cool people are doing it!
Click to expand...
Click to collapse
i try with SPL v7 in this forum already, but still cant.
when verifying my pda info, it come out erro say no connection,
and i already connect pda to pc in boot loader, also show usb words on boot loader screen. i check the usa hub at pc, also got show my pda..
is that the ROM i use for flash not suitable or what?
can all give some rom to try?
m pda is
HERM100
IPL-1.01
SPL-1.09
Hi i'm newbie
I'm french thus excuse me for my english
I try to upgrade my htc in WM6, i sucess, no problem.
After i upgrade with a rom radio and the upgrade block at 40 %.
Now the phone boot in tricolor mode.
IPL-1.04
SPL-2.10.Olipro
I find in the forum that for unbricked my htc i must to flash any rom in nbh format.
How to do that.
I try to install also original ROM_9600_FRA_10303.exe rom but activsync it not active.
Someone can help me please
thanks
Connect you device in bootloader screen with your PC with USB and you should see USB appear at the bottom of the screen on yor device. Now flash any .nbh with the RUU wrapper and select SPL 2.10 New bootloader and flash the ROM...
what is the RUU Wrapper, where can i download it?
unikgwada said:
what is the RUU Wrapper, where can i download it?
Click to expand...
Click to collapse
Here it is
RUU wrapper is a software?
Explain me which is it
unikgwada said:
RUU wrapper is a software?
Explain me which is it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298737
when i use RUUWrapper i havbe an error [260].
What i can do
In the tri color screen with the device plugged in via USB do you have USB written at the bottom? Does your device appear in the device manager?
Yes USB is written on the bottom, and yes the phone appear in device manager .
What are you using XP or vista?? You could try a different USB port or if that doesn´t work you may have to roll back the driver... read this http://forum.xda-developers.com/showthread.php?t=299657
I'm using XP.
When i use myyt.exe the phone make something, but when i try to upgrade any rom i have always this message error [260]
i try to update with rom radio 1.47.00.10 , the upgrade is correct 100%
but when i reboot i return in tricolor mode
I success to install rom with UUwrapper but now the phone block on the picture windows mobile
Thanks
i fine a the solution
Could you please share the solution ? I've got a similar case, thanks.
Hey guys today i downloaded the latest shipped rom from htc for advantage not knowing that the spl was 1.10! and mine was 3.50 so now i'm stocked in bootloader screen now knowing what to do and cant flash any rom! i tried some cmds with mtty but not working. tried removing battery but not working and still stocked in bootloader... i know that this can be fixed but dk how. plz help guys and gals.
before upgrading i was usin Sogarth's base rom and now i get spl 3.50 olinex on the screen.
the ruu cannot connect through usb with bootloader... stocked! anxious
you may want to try this
check that spl3.5 is still in your device (it says in bootloader)
If 3.5 is there
disconnect your device
switch off computer
reset device ( it probably boot stray into bootloader)
switch on your computer
connect the device
install appropriate room for your SPL
that worked for my
( I believe that enable rapi is there to allow for usb comms, but when you connect the device bootloadeR will change from serial to USB
As long as spl 3.5 is in the device OK you should be able to recover
p.s. if room install comply follow recovery procedure, (remove battery)
good luck
room = rom?
hirad_sabaghian said:
room = rom?
Click to expand...
Click to collapse
yeah
anyway, yes please tell us what your SPL version is now. I'm sure it is still 3.50.
also, have you tried reflashing the OS? the RUU can most certainly connect to bootloader. just run it in the normal way..as if the Athena was running WM
the only prob was that pc couldnet connect through usb with bootloader tnx PBL1 and tnx cmon... i solved it! i was shocked cause i thought i mixed up the device! tnx anyway
Originally Posted by hirad_sabaghian
room = rom?
Click to expand...
Click to collapse
Lol never trust a spell checker, they are treacherous criters and will get you in the most embarrassing situations at the lest expected moment.
Any way glad you problem is solved, some times the PC mess up the usb connection.
Hi All,
Quick recap, I tried to install WM6 on a lower than 2.1 IPL/SPl so phone got stuck in boot screen, then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. After flashing the official rom and multiple hard reset, phone is stuck on the bootscreen with the following info:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
Am confused by the OS version isnt it meant to be 5.XXX because its a WM6.
Please.
Please anyone, I am pulling my hair out on this one...
Hello!
Try to use the following recovery method.
rmagyar said:
Hello!
Try to use the following recovery method.
Click to expand...
Click to collapse
Thanks for the reply I have downloaded the rescue kit and i have read the instruction, but the phone is not been connected in the bootloader mode even though i have the Xp usb driver connection. When I connect the usb cable after going into bootloader mode, the pc makes the usb connection sound but when when i run the Romupdate utility i get this error 260 connection error. What can I try again.
Thanks in advance.
I got this problem too.
I dont khnow wat to do, please help as.
rmagyar said:
Hello!
Try to use the following recovery method.
Click to expand...
Click to collapse
I have been able to successfully flash the phone again using the recovery kit but after flashing i took out the battery and powered up the phone, its still stuck at the boot screen with the same message.
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21.
has it gone beyond the point of no return.?
Okay, am helpless here, Is anyone on here willing to fix this phone for me if I can post to them, and pay postage both ways?
did you find any solution?
Hallo!
I have exactly the same problem and I don't know what to do?
Do you guys have any news??
http://forum.xda-developers.com/showthread.php?t=406486&page=23
I would like to get back my Stock ROM Win 6.5 from NAND Android. I have HTC HD2 T-Mobile, Is it possible to download RUU from T-Mobile Site, my Question is shall we need to unlock again after installing this ROM , pls help me
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
Thanks for reply, i will try it 2moro and hope it will work.. thank u again
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
lhernana2j said:
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
Click to expand...
Click to collapse
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
verify
jsmccabe78 said:
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
Click to expand...
Click to collapse
i can verify this works. after using the sd card method, with the version 'RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship'...
im now back to the stock TMOUS rom, and when i hold down volume and the power button at startup it now says 'spl-2.10.0000'
so it does work. i had android on nand before, but had to do this so i can return it for freezing up as it's still under warranty.