Related
I'd like to connect the headset that came with my Wizard to my laptop so I can listen to streaming audio. Beats carrying two sets of headphones around with me. I cannot find such an adapter.
Does anyone know of a source for a four-conductor 2.5mm jack (female)? If I had one, I could make my own adapter.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Check out this site
I found the connector you were looking for (cause I too want to do the same thing) - 2.5 mm 4 pole female jack
http://www.remtrak.com/psu/jack.htm
I also found a headset pinout (for nokia) and could you let me know if the connections are same for the xda headset jack?
http://pinouts.ru/CellularPhones-Nokia/nokia_headset_pinout.shtml
Adio adapter
Try these guys.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories-audio.htm
I use the adapter with the mic in my 01 MDX. Have it going to an old Sony Walkman Cassette adapter. It works awesome for Audio through the stereo as well as hands free. No feed back and people have no issues hearing me. Can turn the audio up on the stere as loud as i can stand it.
Not the solution that we're looking for
Hey anothersmith,
I want to use the Wizard headset on the laptop, not the other way round as its easier to have the connector conected to the laptop than carry it around with the headset. Moreover, the headset that came with the Wizard is cool so I want to keep using it!
Thanks for the help!
China rocks
Hi,
Im sorry, but paying £3.04 for a plug is just a little to much for me.
You might want to consider this: http://cgi.ebay.com/Oasis-music-ada...7686197QQihZ016QQcategoryZ15040QQcmdZViewItem
Oasis music adaptor, www.shope2.com.
Im using one of this on my car, i plug this on my cingular 8125, and i have a Jack 3.5mm stereo, in which i plug my cassette adaptor and listen music in my stereo.
It also has a button for picking up calls when they arrive, and a mic built in which works really fine.
Or if you really want the plug, cut the cable, use a multimeter and you are all set.
I wonder why no one seems to get the point!
Thanks China Rocks, but you too are getting it wrong! I DO NOT want to use my xda to play music on my stereo. I want to connect my xda earphones (that have a 2.5 mm male jack) to the headphone + mic sockets of my laptop so that I can use it to listen to music or talk on the laptop.
xda earphone (headset/headphone) 2.5 mm male jack ---> Laptop audio + mic out connector 3.5 mm female jack
Will somebody get the point!
Need 2.5mm 4 conductor female socket
Reading this thread is painful. I too am looking for a 4 conductor 2.5mm female socket so that I can make an adapter to plug some Shure I4C-T's into the headphone and microphone 3.5mm sockets on my laptop. The source in the UK charges a lot of shipping to the US. Anyone know of a US supplier of 2.5mm female sockets?
Radioshack USA finally has it!
http://www.radioshack.com/product/index.jsp?productId=2603246
Wrong again!
Hi xoom!
That's not what we are looking for! What your adaptor does is connect a stereo headphone with a 3.5 mm male jack to my xda that has a 2.5 mm female jack.
What I am looking for is an adaptor that will connect my "xda headset with mic" (forget about the xda, it's not in the equation here) that has a "2.5 mm female jack" to my "laptop" that has a "3.5 mm female jack" (Female to Female adaptor).
Illustrating this fact:
"XDA HEADSET with MIC" (Female 2.5 mm jack) <--> "LAPTOP AUDIO & MIC OUT" (Female 3.5 mm jacks)
Thanks for your attention!
This?
http://cgi.ebay.com/2-5mm-to-3-5mm-...ryZ88763QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
iclick said:
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Click to expand...
Click to collapse
I used one of those Rat Shack adapters with my wizard and had no problems at all. If you're only getting one channel then it sounds like it is either not far enough in or too far in (i'm guessing the former though). That or you didn't purchase the correct adapter. The only time I had a problem with only getting one channel was when I purchased a mono adapter by mistake. I've also got some other adapters that I have purchased locally for < $5 that work fine. They're not especially pretty but I haven't had problems with any of them. I would be more than happy to purchase one for somebody and send it to them for the price of the adapter and shipping. I can even ship it overnight for around $6.
I will try to make it to the same supplier and see if they don't have the 2.5mm jack or adapter that you're looking for. I'm thinking that they do, though.
Gotcha!
Hey Poiygon,
Thats the thing! Thanks!
Cheers!
2.5mm 4 pole parts
FYI I found 2.5mm 4pole connectors and jacks at "mouser.com". see p/n's 171-7425 or 161-6425-EX which should get you to the area of related parts. I'm using thes for my Siemens SX66 to a motorcycle head set and mic. Hope this helps anyone.
sincerely,
phil
Adapter
Pocketpctechs.com has what you need
I searched and could not find my specific answer (or I didn't type the right search criteria)
Has anyone found, seen or heard of a stero USB headset for the TyTN yet?
OR
What has been the best personal audio option for this little gem?
Please tell me there is an audio option other than the Bluetooth headphones. I need them for the airplane flights.
Any help would be appreciated. Thanks in advance!
This seems to be the best solution...(Taken from another thread)
wwaveydave said:
There is an alternative to an adapter. As they say on Blue Peter, here's one I made earlier.......
http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html
Click to expand...
Click to collapse
And I can add this link to another solution:
Here
usb headsets...may need mini-usb adapter to work with TyTN
http://www.everythingusb.com/usb_headsets.html
Thanks for the replies!
Note, that TyTN does not use a USB headset. It is plain passive headphones.
The TyTN connector has 4 additional pins on the opposite plain of the standard MiniUSB connector. They are used for audio. Headphones are not connected to USB pins at all.
By the way, to use USB headsets with TyTN is impossible just because TyTN does not work as USB host.
Can anyone recommend a site that sells a Mini-USB to 3.5mm Adapter for my Wizard and ships internationally? I usually buy these types of accessories at Brando, but some reason I cant find it on their site.
Thanks
No such thing -- the Wizard has a 2.5 mm 4-conductor jack for headset/microphone. The Wizard's USB connector is just for charge/sync; no audio signals available.
3waygeek said:
No such thing -- the Wizard has a 2.5 mm 4-conductor jack for headset/microphone. The Wizard's USB connector is just for charge/sync; no audio signals available.
Click to expand...
Click to collapse
OK, thanks
sorry wrong place
i got a 2.5 to 3.5 at radio shack for 3 bucks
but now thanks to zoki and nbd i can use my bluetooth headphones with a2dp
I posted a reply to this thread: http://forum.xda-developers.com/showthread.php?t=450197 because it also talks about such an adapter, but I thought I would post a new thread for the phone that I actually have.
I'm looking for a extUSB to 3.5mm adapter, but not the common kind that allows you to plug in stereo headphones or has a microphone built inside the adapter. I'm looking for an adapter that allows you to plug in stereo headsets with in-line microphones. These headsets are designed for iPhones and BlackBerrys and has a 3.5mm connector with an extra ring to support the microphone, and I'm hoping to find an extUSB adapter that supports 3.5mm connectors with three rings so the microphone would work. Does anyone know if such a thing exists? Thanks.
I use this one. It's kind of big but it is the only i can find that I am able to use my iphone headphones with inline mic. After cupcake came out the adapter stopped working but is now working with cyanogen's rom. I would love to find another smaller one that will work with an inline mic.
Thank you so much flowidc for confirming that such a thing actually exists! Please keep me up to date on your quest to find a smaller version of the adapter.
flowidc said:
I use this one. It's kind of big but it is the only i can find that I am able to use my iphone headphones with inline mic. After cupcake came out the adapter stopped working but is now working with cyanogen's rom. I would love to find another smaller one that will work with an inline mic.
Click to expand...
Click to collapse
is this adapter still working for you in Cyans 4.04? mine isnt being detected.
Figured it out. you need the ToggleHeaadset.apk
foltz61 said:
is this adapter still working for you in Cyans 4.04? mine isnt being detected.
Figured it out. you need the ToggleHeaadset.apk
Click to expand...
Click to collapse
mine never broke. only time it didn't work was in OTA cupcake
I have this same HTC usb to stereo with mic adapter and have used it with Cyan 4.04, Cyan 41x, and all the Hero Roms and had no problems. I use both Blackberry earpieces w/ mic and a cheapo earpiece w/ mic. I like way better than the regular HTC usb adapter and earbuds.
I found it on Ebay, I offered the guy $5 and he accepted my offer. Here is the link
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330350650612&ssPageName=STRK:MEWAX:IT
this might be a stupid question, but would the HTC Multifunction Audio Adapter allow you to use a headset that comes with a mic, or would you have to use a earpiece along with an inline microphone?
thanks
shockaj said:
this might be a stupid question, but would the HTC Multifunction Audio Adapter allow you to use a headset that comes with a mic, or would you have to use a earpiece along with an inline microphone?
thanks
Click to expand...
Click to collapse
You just use a headset that has a built in mic.
*edit*
Nevermind, same thing already posted but for much less...
Try this instead
http://cgi.ebay.com/HTC-OEM-Stereo-Headphones-Headset-Adapter-GOOGLE-G1_W0QQitemZ220410822003QQcmdZViewItemQQptZPDA_Accessories?hash=item3351823d73&_trksid=p3286.c0.m14
Great adapter and good build quality too (it has rubbery coating on the cable and it doesn't feel/look cheap unlike some adapters with this style). Great for driving headset since it already has built-in mic. You can use any headphones you want, even though I think the original pair that comes with it performs quite well. The downside is that there's no manual volume control on it, but I can live with that.
Dream not of inline microphones...
I got the OEM adapter as well, but on my ADP1, it doesn't fully work;
I can charge, but the 3.5 and 2.5 jacks are dead. They neither work as outputs or inputs. If I plug an EXtUSB to 3.5 adapter into the EXTUSB headset port on the OEM adapter, the phone's microphone is disabled.
I really want an adapter that can be used to connect, via 3.5 wire, to the car stereo, and still be able to use the phone's microphone, or be able to plug in an external microphone for hands-free use.
Troglodad said:
I got the OEM adapter as well, but on my ADP1, it doesn't fully work;
I can charge, but the 3.5 and 2.5 jacks are dead. They neither work as outputs or inputs. If I plug an EXtUSB to 3.5 adapter into the EXTUSB headset port on the OEM adapter, the phone's microphone is disabled.
I really want an adapter that can be used to connect, via 3.5 wire, to the car stereo, and still be able to use the phone's microphone, or be able to plug in an external microphone for hands-free use.
Click to expand...
Click to collapse
I have a similar setup, I discovered yesterday on the way home a way to get audio through the 3.5mm jack. This is a convoluted way, but it did work.
1. I had my OEM adapter plugged in
2. I plugged in my OEM headset to the headset jack
3. I plugged in the 3.5mm adapter into the 3.5mm jack
4. Started the music player
The sound came through both the headset and the car radio, unplugged the headset and the sound continued to play through the radio. Once the 3.5mm jack is unplugged, the process will need to be repeated. I hope this helps.
rrstx
Hey guys i was wondering i have the apple iphone headphones with the built in mic and ive used it on my moterola rokr e8 just by plugging it into the 3.5mm jack on the phone. Now i know the htc touch pro 2 only has miniusb my question is that is it possible to use an adapter from miniusb to 3.5mm to get it not only the headphones to work but the mic as well?
anyone have any ideas?
I'm surprised you haven't gotten any response to this. I am sure you can use the earphones. The question is will the mic work? My adapter has a built in mic so I can't answer that part. Sorry.
kimtyson said:
I'm surprised you haven't gotten any response to this. I am sure you can use the earphones. The question is will the mic work? My adapter has a built in mic so I can't answer that part. Sorry.
Click to expand...
Click to collapse
ohh alright and which adapter are you using? i have an adapter one with a mic as well for the htc but i find the cord gets really long and it kind of annoying that the mic is on the adapter cuz the headphones are much closer and you have to clip the adapter close to your face but yeah which adapter do you use?
Not working
I think it's not working properly.
I previously read this in an another thread. Earphones are working but not the mic because it's not the same wiring. If i remenber, volume control on the headphone will work too.
I think it depends on the adapter you are using. From what I understand the OEM HTC adapters will allow a headset mic to work, but some of the off-brand (non-OEM) ones don't work with mics.