got the extended ROM files of Orange IL HTC Tytn. These are the files included :
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\PP_ExtVersion.CAB
CAB: \Extended_ROM\P_Generic_UI.CAB
CAB: \Extended_ROM\PP_3-AP-Patch.CAB
CAB: \Extended_ROM\MT_PC_Hermes_Qtek_WWE_060621.CAB
CAB: \Extended_ROM\VT_Engine_23818_ext.CAB
CAB: \Extended_ROM\PP_ace-certs.CAB
CAB: \Extended_ROM\MP_mHub_060630.CAB
CAB: \Extended_ROM\Today.cab
CAB: \Extended_ROM\Connection.cab
CAB: \Extended_ROM\HebCert.cab
CAB: \Extended_ROM\13969_1_HebrewTyTN.cab
CAB: \Extended_ROM\Operator.cab
Did someone ever tried to run the files and get working Hebrew at the end ?
I have Imate JasJam . The Ext. Rom is of HTC Tytn can any damage might happen ? Please advice.
Dotan!
If you provide the files I can install them on a WM6 emulator and see what happens, then I could truy it on my own Hermes which is running LVSW edition of WM6
I think the files I need are:
CAB: \Extended_ROM\HebCert.cab
CAB: \Extended_ROM\13969_1_HebrewTyTN.cab
I have been myself looking for the External ROM of one of the Israeli Hermeses but without any luck, Untill now that is I hope....
Thanx
files that you requsted
Dear friend , all the files you requested can be found here :
ftp://xda:[email protected]/Uploads/Hermes/HTC_TyTN_ExtRom_Orange-Israel-Hebrew_1.18.255.112.zip
Please return with good news
Dear Dotan,
I have tried also to intall WM6, the problem that the Hebrew version installed by eyron supports only WM2005.
And the version istalled is an OEM CAB version without any registration.
Eyron do provide a working BETA version, but you have to register as a trial for a week or purchase it - 300 shekels
The only thing to do is to wait and hope that when Orange offer an upgrade to WM6 it will without any additional cost.
Hope i have answered your quostion.
Dotan.
Dotan!
I have just tryed to install it on an WM Emulator WM5 & WM6 but in both cases it showed Hebrew backwards and it kept on telling me that the software was illegaly installed.
Further it is not Eiron but PDAC (or is it the same?) Strange though... On WM6 it installed succesfully so I presume it is compatible with WM6. Can you see if there is somekind reg key tha tha to be installed?? I also installed the HebrewCert.cab hoping that that would solve the problem but Alais
Let me know if you have any ideas.
Churchill said:
Dotan!
I have just tryed to install it on an WM Emulator WM5 & WM6 but in both cases it showed Hebrew backwards and it kept on telling me that the software was illegaly installed.
Further it is not Eiron but PDAC (or is it the same?) Strange though... On WM6 it installed succesfully so I presume it is compatible with WM6. Can you see if there is somekind reg key tha tha to be installed?? I also installed the HebrewCert.cab hoping that that would solve the problem but Alais
Let me know if you have any ideas.
Click to expand...
Click to collapse
Orange = PDAC Hebrew. Cellcom = Eyron.
=============
Saar
i tried it as well on black shadow
the hebrew installed ok, and i didnt get a message it was illegal, though it seems to be a non hardware keyboard version, becasue the keyboard tab is missing....
Saar, have you got access to a cellcom EXT ROM for us ??
i'd appreciate it as well. especially the intetnet and mms cabs
guys
PDAC uses an IMEI check, it will always install but only on the TyTN PDAC will authenticate and run.
I know of one test I trust(on a jasjam) - PDAC was not authenticated, you can try.
on WM6 - you`ll need to use the Enabled mode(English UI), I also recommend removing all MUI files(040d.mui) from the windows folder.
the best heb currently for jasjam/tytn is eyron's older beta(not the new one!)
I really think this thread should be on the "freak" forum and not here...
Churchill said:
Saar, have you got access to a cellcom EXT ROM for us ??
Click to expand...
Click to collapse
Nope and I was stupid enough to delete mine while upgrading to WM6.
This is a call for Cellcom IL JJ users with the ability to mount/copy/rapidshare JJ Ext. rom for community benefit. I think that most that can, hang out here anyway (and not elsewhere)....
i agree with Saar on that one
anyways, i'd really aprreciate the Cellcom JJ ext. rom if anyone can help with it...
cellcom Ext rom
This is the Extrom from cellcom jasjam for download
http://rapidshare.com/files/37755210/Cellcom_ext.rar.html
PLONTER said:
This is the Extrom from cellcom jasjam for download
http://rapidshare.com/files/37755210/Cellcom_ext.rar.html
Click to expand...
Click to collapse
Thank you your most kind.
=====
Saar
Plonter!
My Thanks are HUGE!!!! I am going to test it on an emulator first...
Let you all know what and how
I beleive we need this cab: Default_MUI-Cellcom-27
but what is the Default_TelmapNav.cab? some kind of navigation sofware?? With or without MAPS? anybody ?
the best thing in these ExtRom is the mms setting
thanx
OK....
On the Emulator it did not work and told me that the version is unregistered. BUT the good news is that there was nothing said about incompatibility with WM6 so I assume that the Cellcom OEM version is compatible with WM6. So now who has the guts to test it on aWM6 or WM5 machine and see if the registration is Required or not?? I think the prog sees that this is no HERMES device and that is why it keeps asking to register. I would try it out myself on my MDA VARIO II with LVSW's WM6 on it but tomorrow is again the week starting and I can not afford to Cripple my device....
How can I use this rom? All I need is to be able to read hebrew on the internet with the english WM6 rom. I would like to leave the english interface for my Hermes. I'd try the Orange ExtROM on my Cingular 8525, but I could read the hebrew from left to right only. What should I do to make it work with the internet? (without pay any $ or shekels)
thanks for any info
OK....
On the Emulator it did not work and told me that the version is unregistered. BUT the good news is that there was nothing said about incompatibility with WM6 so I assume that the Cellcom OEM version is compatible with WM6. So now who has the guts to test it on aWM6 or WM5 machine and see if the registration is Required or not?? I think the prog sees that this is no HERMES device and that is why it keeps asking to register. I would try it out myself on my MDA VARIO II with LVSW's WM6 on it but tomorrow is again the week starting and I can not afford to Cripple my device....
Click to expand...
Click to collapse
I did try it on the black 2.5 rom couple weeks ago. it was working with no problems. I just couldn't change it to read from right to left and like you said it state version is unregistered.
Is there any way to install the 040d files that will let me read the hebrew on the internet?
Related
Sorry if this was posted already but I stumble on T-Mobile NL website. Here's the link...
http://www.t-mobile.nl/zakelijk/htdocs/page/diensten/mda_upgrade.asp
Is this upgrade WWE?
Thanks!
WWE Version
It looks like this is a WWE version.
I opened it in ER2003Edit and it shows WWE on all roms.
Also shows the Extended Rom as version 1.72.190.
Re: WWE Version
Freshster said:
It looks like this is a WWE version.
I opened it in ER2003Edit and it shows WWE on all roms.
Also shows the Extended Rom as version 1.72.190.
Click to expand...
Click to collapse
Thanks!
I wonder what's new on this ROM upgrade... I might try next time. Does it has 1.17 Radio too?
Re: WWE Version
Freshster said:
It looks like this is a WWE version.
I opened it in ER2003Edit and it shows WWE on all roms.
Also shows the Extended Rom as version 1.72.190.
Click to expand...
Click to collapse
Thanks!
I wonder what's new on this ROM upgrade... I might try next time. Does it has 1.17 Radio too?
superperry said:
Sorry if this was posted already but I stumble on T-Mobile NL website. Here's the link...
http://www.t-mobile.nl/zakelijk/htdocs/page/diensten/mda_upgrade.asp
Is this upgrade WWE?
Thanks!
Click to expand...
Click to collapse
Does this also have the blackberry software in it??
I see NOW that this is without the blackberry client (which is what i wanted)
After I have done the upgrade.
So how do i get back from this higher rom to a lower rom???
lummac said:
I see NOW that this is without the blackberry client (which is what i wanted)
After I have done the upgrade.
So how do i get back from this higher rom to a lower rom???
Click to expand...
Click to collapse
So why do you want to downgrade your ROM? do you have problem with this ROM?
But anyway, go to this link on down or upgrade:
http://forum.xda-developers.com/viewtopic.php?t=12101
cheers,
here is detailed of this ROM
config.txt
CAB: \Extended_ROM\MIDI561.sa.CAB
EXEC:\Extended_ROM\CallerIDInstall_WWE.exe
CAB: \Extended_ROM\CamereRC16_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraRC16_Streaming_reg.CAB
CAB: \Extended_ROM\ZipB11_Hima2_WWE.CAB
CAB: \Extended_ROM\MMS1.6.0.14WWE.CAB
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\ClearVue2.4.380WWE_update.sa.CAB
CAB: \Extended_ROM\VideoMMSB21.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\Customization_TMO_RC_NL.sa.CAB
CAB: \Extended_ROM\TMCOMREG.sa.CAB
CAB: \Extended_ROM\TMD_NL.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\OEM_AKU2a_WWE_04260401.sa.CAB
CAB: \Extended_ROM\Version_AKU2a.sa.CAB
CAB: \Extended_ROM\TMDNLCustomize.sa.CAB
CAB: \Extended_ROM\OEM_WWE_04051001.sa.CAB
CAB: \Extended_ROM\OEM_ExtraSetting_04070501.sa.CAB
EXEC:\Extended_ROM\PanelDetect.exe
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
EXEC:\Extended_ROM\TPEnable.exe
lookliked in O2 UK but it has GPRS monitor
and radio is 1.17
Device Information :
ROM version 1.72.00WWE
ROM date 03/15/04
Radio version 1.17.00
Protocol version 1337.28
ExtROM version 1.72.190
Standart Program (Ext ROM) :
Album ver. 2.50 (build 16877)
Camera/VideoMMS ver. 2.50 (build 15954)
ClearVue PDF/PPT Ver. 2.4.380
GPRS Monitor 2.12, build 306
MMS Composer ver. 1.6.0.14
CallerID ver. 1.14 (build 15616)
IA Zip version 1.00 (build 15796)
nothing new in this ROM
I think i should wait for new O2 ASIA ROM.
it may released in the January.
What a mess :
- no TPDisable but they do include TPEnable
- two times GPRS_Monitor
- three driver update files(at least that what i thnk they are) : OEM_AKU2a_WWE_04260401.sa.CAB , OEM_WWE_04051001.sa.CAB & OEM_ExtraSetting_04070501.sa.CAB
* A newer version/build of camera, Clearvue, CallerID
Anyone knows what PanelDetect is?
It is now included in Himalaya Rom 1.72 comparison
feel free to edit this page (application version, CAB functionality, ...)
seems they have not used the extra time to create a better ExtROM . . .
nevertheless, I think I will try the ExtROM (rest is the same as i have).
Did upgrade and works fine I had 1.60, so its quite a step forward
The only thing what i want now is the blackberry stuff
lummac said:
Did upgrade and works fine I had 1.60, so its quite a step forward
The only thing what i want now is the blackberry stuff
Click to expand...
Click to collapse
The upgrade from 1.60 ROm should be step forward, you're right. (if your original was T-Mo Operator NL)
Blackberry stuff is not included on Official 1.72.190 (T-Mo)
Hope this help...
Battery Life Issues After Upgrade
Prior to 1.72 ROM (was using 1.60) my battery life bar on the Today screen would read between 5:50 and 6:08 after a FULL charge.
After 1.72 ROM upgrade my battery life has shown between 3:57 and 4:50 at most after a FULL charge.
I thought battery life was supposed to be improved. Can anyone offer insight?
Thanks.
NEW HIMALAYA ROM 1.75/1.75.604/1.18 UPLOADED.
here ftp://xda:[email protected]_WWE_17501_BL1.06_604_11800_Ship.exe
whats new about it ?
as in how is it different from 1.72
I do not know.... i just forund it.
Link Doesn't work and I can't locate the ROM on the FTP. Does anyone know where it is?
Corrected
Digital Oracle said:
Link Doesn't work and I can't locate the ROM on the FTP. Does anyone know where it is?
Click to expand...
Click to collapse
iMate ROM version:1.72.00WWE
What is the new os for my iMate
ROM version : 1.72.00WWE
ROM date : 03/15/04
Radio version : 1.14.00
Protocol version : 1337.24
ExtRom version : 1.72.810
1.75
any paswords known for editing this rom in er2003edit?
versions
Okay can anyone tell me what versions are on this upgrade as Im running the toenailed version now. Is this one newer or older version ?
Does anyone now if this version is for non-Norwegian MDAII also?
Wouter
Does anyone now if this version is for non-Norwegian MDAII also?
Wouter
Okay can anyone tell me what versions are on this upgrade as Im running the toenailed version now. Is this one newer or older version ?
Click to expand...
Click to collapse
doh! he did
1.75/1.75.604/1.18 == rom version 1.75 extented rom version 1.75.604
radiostack 1.18
Does anyone now if this version is for non-Norwegian MDAII also?
Wouter
Click to expand...
Click to collapse
well it's WWE and if one change the countryID it would work just like every other rom on every other device
Thanks Rudegar,
So who is going to change the Country ID?
Haven't tried that one myself yet... :wink:
Wouter
nk.nbf 0x20040521
ms_.nbf 0x20040522
radio_.nbf 0x20040523
tupisdin, can you paste the address where you got this file?
I've tried to upgrade my i-mate with this (and changed the header of the 3 files) but got a 2 crap (I'll post when I'm home tonight). The first one (with the hymalaya updates files found on the FTP, that I use everytime I upgrade/downgrade) got me an wrong file crap (something like that) and the files in the .exe linked here (see beginning of the topic) sent me a error, but not country ID (yes, I've changed the headers in the 3 files). I'll post more details.
My upgrade setup works pretty good, since I upgraded to WM5h a couple minutes later (why not use this bootloader mode to give another try to WM5). I now need to downgrade since the mapping software I use, hangs in WM5 (from bl to h). :?
Please, can someone try to make this 1.75 version work? I'm very curious on what changes were made from 1.72 to 1.75 (maybe on bluetooth?) :?:
www.windowsmobile.no
Okay, here'a list of errors I get trying to upgrade my Himalaya to the 1.75 OS ROM. With the software provided (in the HI_DT_NorwayRetail_WWE_17501_BL1.06_604_11800_Ship.exe) I get a Error 201: GET DEVICE DATA ERROR.
With the 'regular' software (HimaUpgradeUt.exe and the others) I use to flash, I get an ERROR 102: CE IMAGE FILE CHECKSUM ERROR.
oh well, I tought I could update with this thing this evening
I converted the 1.75 ROM and uploaded it in the FTP
ftp://xda:[email protected]/Himalaya/ROM_1.75/Qtek_1.75_converted.zip
the unzip files found in here (so sorry i havent finish uploading the nk.nbf yet)
ftp://xda:[email protected]/Himalaya/ROM_1.75/Qtekk_1.75_Converted/
[Splash 1.jpg left] [Splash 2.jpg right]
so sorry guys m in a hurry when i converted the files so i didnt change it back to Qtek, its in O2 WWE. im not able to fully test it also ..
the Original Files Comes with new HimaUpgradeUt.exe
File Version 3.1.0.17
Dated: 10-22-2004
i converted the three .nbf to work with HimaUpgradeUt.exe version 1.2.0 both the Original and the noID version
use now the Hima files in this
ftp://xda:[email protected]/Himalaya_SEs/HimaFiles/
Beware:
nk.nbf contains Bootloader 1.06 1.34b
You can now open the Files ER2003Edit .. using the old password
nk.nbf = 0x20040304
ms_.nbf = 0x20040305
Radio_.nbf = 0x20040306
the ROM is WM2003 version 4.20.0 Build 14053
[display_3.png]
Device Information Reports here
[display_2.png]
Config.txt contains
[display_1.png]
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB32_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraRC132_WWE_1.5.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS1.6.0.14WWE.CAB
CAB: \Extended_ROM\OEM_WWE_04071402.sa.CAB
CAB: \Extended_ROM\Version_AKU2_175604.sa.CAB
CAB: \Extended_ROM\opennet.cab
CAB: \Extended_ROM\freedom.cab
CAB: \Extended_ROM\remabc.remote.CAB
CAB: \Extended_ROM\Norsk_Dansk_Tastatur.CAB
CAB: \Extended_ROM\Customize.sa.CAB
CAB: \Extended_ROM\OperatorConfig.PPC.CAB
EXEC:\Extended_ROM\TPEnable.exe
EXEC:\windows\OperatorConf\OperatorConfig.exe
RST: Reset
and heres the Snapshot of Today Screen
[display_4.png]
Thank you toenailed! How do you that (convert to a standard nbf file)? Maybe we should be able to do this by ourselves and let you spank this leaked WM5 thingie. :wink:
Good job toenailed.
I do not have enough time for this
Here I come with the results of my new upgrade.
Actually the 1.75 did not come with some really needed improvements . CearType is still ugly (patch it from the 1.60.00 OS). Microsoft Reader is still 2.3.3 (install 2.4 if you want). Camera 2.1 and album versions are the same as the one provided with the old OS (use the Special XDA-Developers 2.51 one).
The thing I'd like to know is how to determine if the Bluetooth pairing security update is in this OS ROM. Other than that, the ROM seems to be pretty stable, like the 1.72.00 WWE was. I would not recomment to update in a hurry. Just wait for your next 'format cycle' to come.
hi al
i read the new tytn rom thread, including all aditional CID stuff.
question is- what's the best rom for a tytn?
i got my tytn today, and i see there are alot of english roms. which is the most stable one? which should i flash on my device?
thanks!
Simon
Your best bet might be to wait for the new official TyTN ROM. Now that the Cingular 8525 has shipped, it's my hope that HTC will rededicate its resources to supporting its own flagship product (but where have we heard that one before...).
If you're in a hurry, see my signature for a combination that's working very well...
i'm confused now...
there's a big thread here titled "new HTC TyTn rom" isnt that an official htc rom?
simonk12 said:
i'm confused now...
there's a big thread here titled "new HTC TyTn rom" isnt that an official htc rom?
Click to expand...
Click to collapse
There's nothing really "new" about it. It seems to have all the same bugs and problems as the old one.
Personally, I am using the Cingular 1.34 rom on my TyTN, with a customized Extended Rom, which is mostly made of up the original TyTN extended rom, and a bunch of patches and tweaks from Cingular and Dopod ext roms.
rassah said:
Personally, I am using the Cingular 1.34 rom on my TyTN, with a customized Extended Rom, which is mostly made of up the original TyTN extended rom, and a bunch of patches and tweaks from Cingular and Dopod ext roms.
Click to expand...
Click to collapse
Just curious, why did you go with the Cingular ROM? Also, what did you use from the Dopod Ext. ROM?
I'm using the TyTN as delivered, with a couple of Cingular Ext ROM bits... Working very well so far.
Which cabs are you using from the Cingular ExtROM?
gravejoker said:
Which cabs are you using from the Cingular ExtROM?
Click to expand...
Click to collapse
I personally installed:
CAB: \Extended_ROM\MT_PC_Hermes_GenericLight_REG_060609.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\C_HSDPA_Wirelss_Modem_Stall.cab
CAB: \Extended_ROM\T_mm1lib_DLL.CAB
CAB: \Extended_ROM\PP_PIE_Default.CAB
CAB: \Extended_ROM\SMS_Setting_07Jun06.CAB
However, the only thing I really noticed was the Wireless Modem one. It obviously installs a somewhat useful program. The others, I'm not so sure. I still had to manually enter data network and MMS settings.
I did try the remaining CABs initially. They're worthless, just shortcuts to get XpressMail, GoodLink and TeleNav. All of which can be had from web pages directly. No need to install shortcuts.
sickchilly said:
Just curious, why did you go with the Cingular ROM? Also, what did you use from the Dopod Ext. ROM?
I'm using the TyTN as delivered, with a couple of Cingular Ext ROM bits... Working very well so far.
Click to expand...
Click to collapse
Cirgular rom seems to have fixed the following for me:
1) Camera doesn't crash or take black/blank pictures at random times
2) TCPMP player actually works, or at least the audio part of it does (on original TyTN rom audio skips like crazy)
3) WiFi connection seems to be much more stable (I had an issue at one point where WiFi would attempt to connect, and the WAP point would immediately dissapear. WAP worked fine on other devices.)
This is what is in my Extended ROM (P.S. I had to use fit4cat to unhide and unlock my extended rom, then copy all these files in, along with a modded config.txt file, and hard-reset)
From HTC TyTN 1.18.255.106 ExtROM WWE
CAB: \Extended_ROM\PP_ExtVersion.CAB
CAB: \Extended_ROM\P_Generic_UI.CAB
CAB: \Extended_ROM\PP_3-AP-Patch.CAB
CAB: \Extended_ROM\MT_PC_Hermes_Qtek_WWE_060621.CAB
CAB: \Extended_ROM\VT_Engine_23818_ext.CAB
CAB: \Extended_ROM\PP_ace-certs.CAB
CAB: \Extended_ROM\MP_mHub_060630.CAB
(I don't use MMS so removed that cab)
From Dopod 838 Pro ROM 1.30.707.4 ExtROM
CAB: \Extended_ROM\P_wifi_fix.CAB
And from Cingular 8525 1.34.502.1 ExtROM WWE
CAB: \Extended_ROM\C_HSDPA_Wirelss_Modem_Stall.cab
Oh yeah, also, before flashing, I installed the SIM & CID unlocker to make my device SuperCID, and afterwards installed the TyTN original skin (found in Wiki under Hermes Dialers), and the PTT button patch that lets me use it again. Here in US I can't use the front camera for anything phone-related, so I'm not worried abuot loosing it in my dialer. It DOES work with CoolCamera, though, so the drivers for it ARE included in the Cingular rom.
So what exactly does this do:
From Dopod 838 Pro ROM 1.30.707.4 ExtROM
CAB: \Extended_ROM\P_wifi_fix.CAB
Click to expand...
Click to collapse
I installed it for shiggles... haven't noticed anything yet. Think I may give the Cingular ROM a shot tomorrow to see what they did with it and see if I can get a little better radio performance on their network. Going to go pick up a real 3G SIM tomorrow too.
Do you know what each of the CAB files install. I'm wondering if I need any of them.
Thanks
Just released today on dopod website (STILL AKU 2.3)
File name - HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
http://www.dopodasia.com/Dopod_en/members/others.aspx
Dopod 838pro Rom code updated
Please Note: Owners of a Dopod 838pro.
There is a new ROM code available for the Australian market. Please checked the ROM code version of your 838pro and if it old then 1.30.707.4 please feel free to download and then install this on your 838pro. You can check the ROM code version of your 838pro by clicking Start>Settings>System (Tab at the bottom of display screen)>Device Information
Please note that all data and software would be lost after the ROM update, so please make sure that you backup your data before proceeding any further.
Please do not unplug the USB cable during the ROM update process – this will make your device not able to boot up afterwards.
Blah blah blah...
HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
Strange, if it is for the Australia market, how come it wasn't in the Dopod Australia Website!!!
Nutdhanai said:
Just released today on dopod website (STILL AKU 2.3)
File name - HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
http://www.dopodasia.com/Dopod_en/members/others.aspx
Dopod 838pro Rom code updated
Please Note: Owners of a Dopod 838pro.
There is a new ROM code available for the Australian market. Please checked the ROM code version of your 838pro and if it old then 1.30.707.4 please feel free to download and then install this on your 838pro. You can check the ROM code version of your 838pro by clicking Start>Settings>System (Tab at the bottom of display screen)>Device Information
Please note that all data and software would be lost after the ROM update, so please make sure that you backup your data before proceeding any further.
Please do not unplug the USB cable during the ROM update process – this will make your device not able to boot up afterwards.
Blah blah blah...
HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
Click to expand...
Click to collapse
Any specifics on the radio and rom dates / numbers?
Cheers,
Arne
ROM: 1.30.707.4 (08/22/06)
Radio: 1.20.31.10
Protocol: 32.52.7020.00H
SPL-1.06
No big deal -- South Africa HTC ROM with Radio 1.18 and SPL 1.09 is quicker.
I'm switching back to the HTC SA ROM and wait for AKU3.X...
SuperCID rulz...
Cheers
can u extract the extended ROM for me? I am curious to know if it has CABS in there for 3Australia.
jasjamming said:
can u extract the extended ROM for me? I am curious to know if it has CABS in there for 3Australia.
Click to expand...
Click to collapse
LOCK:Enabled
CAB: \Extended_ROM\MT_PC_Hermes_DopodAsia_REG_060612.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\P_pIE_DopodAsia_WWE_1237071.CAB
CAB: \Extended_ROM\PT_STK_UIPPC.CAB
CAB: \Extended_ROM\PT_CVC_Path.sa.CAB
CAB: \Extended_ROM\D_Hermes-v3_1r1668.CAB
CAB: \Extended_ROM\D_PPC_2300_AnotherWorld.CAB
CAB: \Extended_ROM\D_PPC_2300_MagicPuz.CAB
CAB: \Extended_ROM\D_MP3Player_PDA_ENG_Ver094.CAB
CAB: \Extended_ROM\D_CVC-PPC-WWE-606161-DopodHermes.CAB
CAB: \Extended_ROM\P_Button5_VCommand.CAB
CAB: \Extended_ROM\MT-CameraPatch-Hermes-060703.CAB
CAB: \Extended_ROM\P_wifi_fix.CAB
CAB: \Extended_ROM\P_HER_RIL_0911.CAB
LOCKisabled
HIDE:Enabled
CAB: \Extended_ROM\D_spwm5.Release.CAB
HIDEisabled
After hard reset then allowing it to run auto install, this rom will install a 3 email (push mail) software on your phone. I have deleted mine so no pics sorry
thanks for that,
is the ext.rom on the ftp server ready for download? or can yu attach it here?
Cheers
I just logged into the Dopod site and can't see any new ROM listed. The patch for Telstra 3G is listed under "System Update" and nothing else.
I figured out problem, my account is registered to Australia - not Singapore.
I think the ROM been tk out......can't even find it on the website..
I've run this ROM for three days now -- no problems to speak of. I still think the South Africa HTC ROM is more polished. Yes, it has been removed from the dopod (singapore) website -- maybe moved to dopod Australia/New Zealand? Would make more sense.
It's now in the upload section on the FTP site -- will PM Pof to move it and create a download link on the wiki.
Cheers
aquanaut88 said:
I've run this ROM for three days now -- no problems to speak of. I still think the South Africa HTC ROM is more polished. Yes, it has been removed from the dopod (singapore) website -- maybe moved to dopod Australia/New Zealand? Would make more sense.
It's now in the upload section on the FTP site -- will PM Pof to move it and create a download link on the wiki.
Cheers
Click to expand...
Click to collapse
Yes, it is on the Australia Dopod site.
Lucky i fast enough to download it..b4 it move to Australia...side...
Has anyone figured out what is new with this ROM?
I assume it contains the Telstra fix.
aquanaut88 said:
I've run this ROM for three days now -- no problems to speak of. I still think the South Africa HTC ROM is more polished. Yes, it has been removed from the dopod (singapore) website -- maybe moved to dopod Australia/New Zealand? Would make more sense.
It's now in the upload section on the FTP site -- will PM Pof to move it and create a download link on the wiki.
Cheers
Click to expand...
Click to collapse
Reports say that the Bluetooth on/off bug is fixed and the problem with PocketPlus Battery Bar in the SA ROM is fixed, how about this ROM?
Guys/Girls this was the release ROM from two months ago... no changes... This does not include the Telstra 850Mhz fix. That needs to be applied after... Anyone wanting the ExtROM it is in the WIKI... I extracted it a month ago...
walshieau said:
Guys/Girls this was the release ROM from two months ago... no changes... This does not include the Telstra 850Mhz fix. That needs to be applied after... Anyone wanting the ExtROM it is in the WIKI... I extracted it a month ago...
Click to expand...
Click to collapse
The newer rom (11/2006) post in the subject has been removed by Dopod. Thus the Dopod website now only shows the ones from Aug (08/2006)..
Rapidshare link
Here is Rapidshare link to the newest Dopod 838 ROM (11/2006) AUS
http://rapidshare.com/files/5924708/HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship.exe.html
the file your uploading is still the Ship Rom which is dated two months ago and does not fix the Telstra 850Mhz issue.
I just got four Dopod 838Pro's delivered today (from Vodafone) and they have the same EXTENDED ROM as the one I got several weeks ago from a local reseller.
Same ROM details as well, compared to ROM mentioned in thread.
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....