Hi - can anyone help? I've got a 1GB storage card that somehow came out of my K jam whilst it was in my pocket. Now it's not recognised by the device, so all the programmes on it (Sound Explorer,Tube,Metronome Web IS Tool box etc plus all my playlists are u/a). Trouble is I'm away at the minute so don't have the adapter to reformat the Mini SD in my laptop - nor do I have ready access to all the software keys. Is there any way I can get this storage card to say hello again? Aaaggh!
Does your SD card just slide right back in or do you have to push it in (kind of like puching a button- only analogy i could think of at the moment). If it slid out while it was in your pocket then the inside might still be pressed down and just sliding the card in wont be enough to let it see the card again. Slide the card in and push it down so that the card pops back out and then put it back in again and see if it reads.
Thanks for replying - no the card never came completely out when in my pocket - it just half emerged - it must have caught on something. I have removed the card, and tried it again - but no joy I'm afraid. I guess it's off to buy another card..... thanks for your help
What is your OS version?
I had the same the other day on a wizard. At the end it worked out the OS was to old and could only recognize 512 ms cards.
After unlock and upgrade to WM5 it recognized all card. Even 2gb
Conrad
Related
Had to return my 3125 because the microSD cards would become corrupt for no reason. This happened twice. Thank goodness I was able to return the microSD cards as defective. This is what happened: Folders/Files would disappear out of the blue. No programs running, no nothing. Listening to music thru my Motorola Bluetooth transceiver(A2DP is very cool). Shut everything down. A couple hours later, Music folder invisible. It's still there, you just can't see it or access it. Take the card to my PC and it does not recognize the microSD card anymore. Hangs everything up. So, from my phone I delete everything from the microSD card. Check the Properties and it shows there is still a gb of data on the card. Now I'm just pissed, so everything goes back to the store. I still had a few days on Cingular's 30 day return policy (Cingular is great). I read a few other threads where people were havng the same issue. Buyer beware. [Applied the A2DP hack to my 2125 (which is a better phone - better reception, easier to use with one hand, ect...) works great - see http://richtech.wordpress.com/2006/05/11/go-wireless-on-your-cingular-2125/
for instructions. I did NOT upgrade my ROM before performing the modification. I still have ROM version 1.0.9.0 and everything works fine.
could be a microsd card problem
would you please post you microsd make and model?
i am currently using a transcend 1gb (normal speed)
been using it everyday for music(yeah a2dp is great) photos documents .... etc
all is fine .. the normal speed doesn't lags so much like when it was on my ppc
I was using a Sandisk (normal speed) microSD purchased from a Verizon Wireless retail store.
I lost a folder (Application Data/Home) during the night without touching the phone. Had to send it in, and received a brand new one back. I do NOT have a memory card at all!
I too is using a microSD card of Sandisk but it dosnot has ne problem.
there is a similar post on howard forums. I had this same problem happen to me twice. Both times it was a sandisk 1gb card, but one of them was the ULTRA model. There is something frying SD cards...and it's not based on brand. I have the qtek 8500 and it happened
briboynyc said:
There is something frying SD cards...
Click to expand...
Click to collapse
I have read somewhere on these forums that if u let ur device to charge for more than 3-4 hrs or leave it by accessing gprs for some time then the device gets hot and can fry ur sd cards or ne internal chip.
dude... i am having the same problem as you... the funniest part is that my Micro SD goes corrupt every 3rd after the reset of the phone or i uses the handfree kit.... but i am using a Dopod S300... is it really the card problem or the phone? i am still figuring out.. cause each time i take my phone to the shop the Micro SD will just be back to normal after 1 hour... but i am using only 512mb
Hi all,
took out my SD card to write music files on it. Worked before in my Athena and then in my PC. After reintslling card to Athena it won't be recognized any more.
Tried reboot, checked power in advanced config.
What can I do else ?
Dieter
Probably buy a new card! That has happened to me (more than once).
Try re-seating it a few times making sure it is going in the right way.
The fragile nature of these cards is one of the good things about having the disk drive built in.
Broke my NT screen & replaced but now touchscreen capability doesn't work. I have been trying to return to stock & go from there but am unable to get that done w/o touch.
I am assuming I didn't get a defective screen but cannot be sure.
Anybody have any suggestions for me?
Thank you!
MIGHT<--------- work
sd1 boot--->clock works mod recovery---------------
http://forum.xda-developers.com/showthread.php?t=1446987&highlight=cwm
boot into it(remove) and then insert
sd2 which, contains stock zip,or any other rom
flash that sucker
and hope it works
METHOD 2 (might be easier, but results in root and other apps)
http://forum.xda-developers.com/showthread.php?t=1488035&highlight=cwm
(methods above uses no screen, only side buttons and the n)
please reply because i am interested to see if this works
I can't boot to an sd card. Tried Method 2 & was not able to boot to the card. Flashed the image to the card, put it in the Nook, powered down 8xs & get the blue menu but then can't get the zip image to work.
Sorry, I am a noob in may respects & I'm really foundering here. In method 1 I don't even know how to make a new MSDOS partition table and add a 50 MB FAT32 partition as the first primary partition.
I fear I am up the proverbial creek!
interesting...
method one 50 mb http://forum.xda-developers.com/wiki/SD_card_partitioning
why can you not boot from SD
and
by blue menu do you mean the clock works mod
and what do you mean by 'can't get the zip image to work.' what is happeneing
concern:
well you said that it was a hardware screen damage
so TECHNICALLY the software should work as created since that was 'untouched'
thinking...
Sorry I haven’t gotten back to you; I’ve had company & no time to address this again.
I will try & explain the steps I have taken, although, as I have explained my tech speak is limited at best.
I am using a 2gb sd card (believe it or not I snapped my 32gb card in half while replacing the screen)
I just now tried to use method 1. I thought I followed the instructions exactly found at: http://forum.xda-developers.com/wiki/SD_card_partitioning
but now my computer doesn't detect the sd card at all, nothing when I plug & unplug the card.
Previously when I said 'get the blue menu' yes, I mean clock works mod.
I think somehow during the use of Partition Wizard 7 the card reader on my comp was fried. I bought a brand new 16gb card; when inserted in the adapter, then into the onboard reader, PW7 shows both cards as 'bad disk'
woah woah woah...well first i was 'gone' for a couple of days due to freshman finals. (dont be like...well this young foo aint going to help...cuz i try to)
second--> the chip could not have gotten fried...check if it works with the native software (windows explorer) and with other SD cards
and how is it one snaps the 32gb sd. like you forgot it inside the device...or while taking it out it 'broke'
back to my third post---> and what do you mean by 'can't get the zip image to work.' what is happening
like is it an md5 sum error or...
obviously this is a very technically problematic because by now...other devs would be helping...
Finally figured out sd card reader on my comp quit working - card's okay in different comp. Snapped the 32gb card when removing the back of the NT. (My bad-forgot it was in the tablet & removing back with card in snaps the card in 2)
Finally got the NT returned to stock (Kudos to Ray Waldo.com)
Now I have working stock NT but still no touch capabilities. My best guess is that the touch digitizer of the screen is bad & since warranty was for 30 days seller won't exchange. (It has been 40 days) Seller is not appreciative of the fact that I have been trying to get this thing working & I too was on vacation.
So unless someone has another idea of what might be wrong, I'm up a creep.
I really appreciate your efforts & the help I have received.
From my reading the touch part is not sold with the LCD display. I assume you purchase the digitizing touch part too.
"7" Nook TABLET IPS LCD Screen Display Repair Replacement. This item is the exactly inner IPS LCD screen dispaly (without Touch screen digitizer glass) for Nook TABLET , easy to change, plug into the board, ....."
Most manufactures have internal diagnostics, can you somehow run these? Who ever your vendor was they should be able to get you the manufactures information. If nothing else you may be able to send it to them for testing.
I did take two laptops apart to combine them into one working one, lots of thin flat cables that went directly into connectors. I did observe that some held well, some did not insert fully and some did not stay in very well. Could you problem be a loose cable?
goworley said:
I think somehow during the use of Partition Wizard 7 the card reader on my comp was fried. I bought a brand new 16gb card; when inserted in the adapter, then into the onboard reader, PW7 shows both cards as 'bad disk'
Click to expand...
Click to collapse
Did you ever get this thing fixed?
I took my Droid Razr Maxx to a local repair shop to replace its broken screen ($279 + tax = ouch). After I left the store, I noticed that my 32gb Micro SD card was blank. I thought this was weird, but planned to just re-fill it with my music, etc., when I got home. However, I can't get it to read, much less format. I've tried two PCs (Win XP and Win 7 64bit). I've tried three SD card readers on both PCs. To be sure that the readers are working, I've tried them successfully in on both PCS with an old 2gb Micro SD card, so it's not the readers or the computers. I've also tried to format the 32gb card using the Razr itself (it sees the blank card... I tell phone to format it... nothing seems to happen... lather, rinse, repeat), but even after doing so, there's a status bar message that the SD card is "blank" or "has an unsupported filed system." When I try to copy a file from internal memory to the 32gb card using the Razr, it fails. When I cable my Razr to my PC it sees the SD Card slot as empty (if I try to copy something there, Windows says "insert disk"). The SD Card slot on the Razr is still functional, because my old 2gb card works just fine when installed in the Razr. My Razr is running Stock ICS 4.0.4, but is rooted.
Question -- Assuming that this is indeed the same 32gb card that was in my phone when I brought it in for repair, what could the repair shop have accidentally done to it that would cause it to stop functioning?
Either the shop broke it or they swapped it. I guess its the former, because surely the tech who did it would be risking his job if caught. Who wants to get fired over a $30 memory card. But I can't imagine what the tech could have done accidentally that could kill it.
SoonerLater said:
I took my Droid Razr Maxx to a local repair shop to replace its broken screen ($279 + tax = ouch). After I left the store, I noticed that my 32gb Micro SD card was blank. I thought this was weird, but planned to just re-fill it with my music, etc., when I got home. However, I can't get it to read, much less format. I've tried two PCs (Win XP and Win 7 64bit). I've tried three SD card readers on both PCs. To be sure that the readers are working, I've tried them successfully in on both PCS with an old 2gb Micro SD card, so it's not the readers or the computers. I've also tried to format the 32gb card using the Razr itself (it sees the blank card... I tell phone to format it... nothing seems to happen... lather, rinse, repeat), but even after doing so, there's a status bar message that the SD card is "blank" or "has an unsupported filed system." When I try to copy a file from internal memory to the 32gb card using the Razr, it fails. When I cable my Razr to my PC it sees the SD Card slot as empty (if I try to copy something there, Windows says "insert disk"). The SD Card slot on the Razr is still functional, because my old 2gb card works just fine when installed in the Razr. My Razr is running Stock ICS 4.0.4, but is rooted.
Question -- Assuming that this is indeed the same 32gb card that was in my phone when I brought it in for repair, what could the repair shop have accidentally done to it that would cause it to stop functioning?
Either the shop broke it or they swapped it. I guess its the former, because surely the tech who did it would be risking his job if caught. Who wants to get fired over a $30 memory card. But I can't imagine what the tech could have done accidentally that could kill it.
Click to expand...
Click to collapse
Either a long exposition to sun/ magnetics/ dust// .etc can damage a memory. (in fact these artifacts are kinda sensitive)
Or it can just expire. A repair could work if it was at least being recognized by pc or card readers. But by your relate it'll not work anymore.
Cheers
I've seen microSD card die for no apparent reason. It actually happened to the 16GB card that was in my RAZR when I got it. I took the card out to give it to the original owner, and nothing - it was just dead.
get gparted and reformat the sd card
reaperzero said:
get gparted and reformat the sd card
Click to expand...
Click to collapse
I will need to try this!
Well... sorry for necro bumping this, but seeing as Micro SD's are a topic even nowadays, I'll ad my 2 cts.
My micro SD got partially damaged when I had too many programs on my Android Phone access it at the same time (Power Amp, OBB on SD, Galerie, Backup Program).
However in my case it was a fun kind of damage done:
- The data on the Disk was still readable, and I could recover most of it to a 32 GiB card (save for 2 unimportant image files).
The fun part is:
I can't format the disk, it'll always show the same content / files /size used if I plug it in again.
Deleting files does the same. Etched for infinity xD.
I'll try the magnet trick, as I wouldn't want anyone to read the card when I throw it away.
Hi,
I have just bought Sandisk 32GB ultra Micro SDHC card for my Dell Streak 5 and installed few apps on it, now when I turn the phone on in the morning it keeps restarting 4 or 5 times till I take the battery out, then when I turn it on it shows under the SD card Capacity in Settings Total space 0.0, available space 0.0
When I press UNMOUNT then I press MOUNT I get a message Blank SD card or unsupported file system and while I’m reading this message my phone restarts.
But when I switch off the phone and take the SD card out and put it back in again it works fine and it shows the card capacity 29.7GB and it shows all the files are still on it, also whenever I put in my laptop it recognize it and I can see all the files.
This card was bought from a famous website in the UK and it is genuine, I just don’t want to keep taking the card out every morning before I use the phone and I find it too much hassle.
The Phone is running on official Froyo Dell Streak 2.2 Rom
Please tell me if this is a bug or not and if there is a fix for it.
Thank you
catsmaty said:
Hi,
I have just bought Sandisk 32GB ultra Micro SDHC card for my Dell Streak 5 and installed few apps on it, now when I turn the phone on in the morning it keeps restarting 4 or 5 times till I take the battery out, then when I turn it on it shows under the SD card Capacity in Settings Total space 0.0, available space 0.0
When I press UNMOUNT then I press MOUNT I get a message Blank SD card or unsupported file system and while I’m reading this message my phone restarts.
But when I switch off the phone and take the SD card out and put it back in again it works fine and it shows the card capacity 29.7GB and it shows all the files are still on it, also whenever I put in my laptop it recognize it and I can see all the files.
This card was bought from a famous website in the UK and it is genuine, I just don’t want to keep taking the card out every morning before I use the phone and I find it too much hassle.
The Phone is running on official Froyo Dell Streak 2.2 Rom
Please tell me if this is a bug or not and if there is a fix for it.
Thank you
Click to expand...
Click to collapse
maybe the connection between the card and the card slot is a bit loose.. try attaching a piece of paper on the card and insert it into the slot...
Also maybe try letting the Streak format the card
Sent from my GT-I9100 using Tapatalk 2
Thank you deysmacro and cdzo72 for the replies, coppied all the files to my laptop, formatted it and I have put the files back and it seems to be fine at the moment, will keep an eye on it and let you know, thank you again.
Hi,
Just a quick update, I still have the same problems, I even sometimes get a message saying Damaged SD Card and the screen keeps blinking, but I have just done a final format using the SD Formatter program and it is working fine because there is absolutely nothing on the card, it looks like when I install any program it behaves bad, I don't know what to do.
Thanks anyway for the quick replies