I have upgraded my OS from 1.23 to 2.06 (cingular OS only, no extROM).
Voice Command 1.5 installs properly but gives an error when launched
Voice Command 1.6 refuses to install at all
Both versions of VoiceCommand are French not US (though you would need to know that )
I have tried to do that just after a hard reset not to be polluted by my other apps, but I have the same result
I have tried with and without the "allow non-certified applications" flag from HTC tweak 2.0. Same result...
I got 1.5 to work on this os after a sprite restore with sbu from OS1.23, but the PIM database was corrupted. So I had to restore without it and get it back from ActivSynch. I do not think there should be a relationship between the 2 however...
1.5 was working after the twicks to remove Speed Dial as indicated on the Wiki (but with corruped PIM database)
But since I have a clean PIM database, no way to get Voice Command to work despite desinstall, clean any trace of it in the registeries and reinstall...
Any hints from the experts on the group?
That would be much appreciated as I am running out of ideas to try!
Odd,
It worked for me. Of course, knowing me I probably copied the CAB down to the device over USB and ran it there.
Of course, I'm using the english version since all the people I know have english names (joke).
Rob
I did try to install it thru a cab execution on the device as I do usualy (I like to keep all the cabs for easy reinstall if necessary)
Any hint why I get an exec error on 1.5? I would stick to it if it worked as I found some ways to get it to work with BT
Try setting all parameters in the regional settings to US. then reinstall. revert afterwards to French settings.
I have come across an other Microsoft product which needed US settings.
Simple.
Cingular OS2.06 is AKU3 = No VC1.5
MS Voice Command v1.5 will NOT work on AKU 3.x ROMs; VC v1.6 should work (does for me with Cingular 8500 w/OS 2.06)
Good Luck!
Cingular 8500
OS 2.06
Radio 1.27
drbowden said:
MS Voice Command v1.5 will NOT work on AKU 3.x ROMs; VC v1.6 should work (does for me with Cingular 8500 w/OS 2.06)
Good Luck!
Cingular 8500
OS 2.06
Radio 1.27
Click to expand...
Click to collapse
I second that! 1.5 would not work at all. Only 1.6 did on the latest Cingular AKU 3.3 ROM.
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option=...ge=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/show...ighlight=vibra
Download here: http://forum.xda-developers.com/atta...7&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/atta...2&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
Post duplicated, use this one in WM6 forum:
http://forum.xda-developers.com/showthread.php?t=298919
Here I have a bunch of boring ROMs for your StarTrek. I call them boring because they are devoid of any personalization, customization, or 3rd party apps other than what comes with a shipping ROM. These ROMs are OS only, will not change your initial splash or radio (but it does change the operator splash). A text file ReadMe.txt in the download contains brief instructions on how to flash this ROM. Apparently the 3.06 IPL/SPL in QTEK ROMs is broken and cannot recover via MicroSD so I would recommend updating to 4.01.0001 prior to flashing any of these ROMs, although that in itself can be risky (see below for download). Enjoy, and flash at your own risk!
Details
5.2.1711 (Build 18170.0.5.1) Core OS (SYS) is ported from T-Mobile Shadow Feb. '08 update.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
OEM Edition for AT&T 3125 - The same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring Edition is a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
Adobe Reader LE 2.0 (new, from TMO Shadow, replaces original ClearVue PDF)
Office Mobile (new, replaces original ClearVue Office suite)
Windows Live/Live Messenger (new, replaces original MSN Messenger)
Microsoft Voice Command (replaces Cyberon Voice Dial)
English-only xT9 (new, from HTC S730 "Wings", dated Sep 7, 2007, replaces older T9)
Esmertek Java (new, from TMO Shadow update, replaces discontinued Tao Intent Java)
Cingular bloatware, customization, setup, and theme
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
SecurityOff (required, because some apps can't install with it on)
Clean ROM WM6 - Similar to the above (same drivers), but lacking Cingular customization and bloatware. Does NOT have Microsoft Office or Adobe Reader. This will leave more storage available for 64MB devices like QTEK 8500 or iMate Smartflip. As this is an unbranded ROM, you will need to manually set up your GPRS and Proxy connections.
Windows Live/Live Messenger (new)
English-only xT9 (dated Sep 7, 2007)
Esmertec Java
Cyberon Voice Dial
SecurityOff (required, because some apps can't install with it on)
Neo Edition Clean WM6 ROM - Same as above, only added Neo theme from the T-Mobile Shadow. No other customizations.
CREDITS
Thanks to pArtizAn (Erofich), Alex[DFR], Strik3r, and Chymmylt for use of the WM6 XIP in early versions of my ROMs. Without it, my first ROM would have been delayed 2-3 weeks.
Known Bugs - Applies to all versions.
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
Possible xT9 can't backspace on some websites bug.
Roll your own! Here are the SYS, OEM, and ROM folders for the Clean Edition ROM. Add this to your favorite kitchen. RUU included.
For experienced ROM builders only!
Download Clean Edition Kitchen files
Other Updates
These are from the latest Cingular ROM, newest for STARTREK that I'm aware of. I have tested these and they worked fine on my phone but I am not responsible if you take the risk and they damage your phone! Flash at your own risk!
Download IPL/SPL 4.01.0001 CAUTION: Flashing IPL and SPL could kill your phone... permanently!
Download Radio 4.1.13.34_02.79.30
Download Radio 4.1.13.46_02.97.90
Prerequisites
Your device must be CID unlocked! See this thread.
Please report any bugs with a detailed explanation of how to reproduce them.
Change Log
Mar 6, 2008 - OEM version, single press of RECORD button activates Voice Command. Should support BT activation now. All clean versions now use the same animated HTC splash. Shows HTC logo on outside screen instead of blank (thanks Erofich). I figured how to port XIPs so all ROMs now use my own XIPs ported from scratch. Added Neo and WM6.1 editions.
Feb 21, 2008 - Fixed Vibrate in Profiles bug, possibly fixed Microsoft Live can't connect bug, updated some files (no longer have to press OK after cold boot setup), newer OS build (18170.0.5.1), newer Esmertec Java, Sim Manager, changed Cyberon Voice Dial to MS Voice Command on Boring version.
Feb 18, 2008 - Changed Tao Intent Java to Esmertec Java, T9 to xT9 on all versions. Added download links to latest radio and IPL/SPL.
Feb 16, 2008 - Added kitchen files for Clean Edition.
Feb 15, 2008 - Added Clean Edition. Changes to Boring Edition: T9 problem fixed, Start menu now allows scrolling (no need to press More), SecurityOff to fix programs can't install problem.
Feb 13, 2008 - Original Release of Boring ROM.
Click to expand...
Click to collapse
Extras
Clean ROM a little too clean? Here are some add-ons in CAB form.
Adobe Reader LE 2.0 Build 288531 (from T-Mobile Shadow)
Neo Black & Blue Theme - Only works on ROMs with Neo integrated. Not just a simple color change, I tried to copy the mockup of T-Mobile Black. It looks almost identical to the mockup on my PC, but unfortunately the conversion from 16.7m to 65k colors results in some false contouring.
thanks man!!
does gprs work in this one?
GnatGoSplat said:
Boring ROM WM6 Cingular (AT&T) - It's the same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring ROMs is to make a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
XIP is thanks to Erofich's WM6.
5.2.1711 (Build 18165.0.5.0) Core OS (SYS) is ported from T-Mobile Shadow.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
Changes
Behind-the-scenes changes were numerous, but visible changes are minimal (although I did make a few):
Office Mobile replaces ClearVue apps. Most devices that used ClearVue in WM5 were changed to Office Mobile in WM6 so monkey see, monkey do.
Adobe Reader LE 2.0 from TMO Shadow replaces ClearVue PDF.
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
Known Bugs
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
OS only, will not change your initial splash or radio (but it does change the operator splash).
Download
Please report any bugs with a detailed explanation of how to reproduce them.
If there is much interest, I can make a cleaner, unbranded version of this ROM or a vanilla kitchen.
Click to expand...
Click to collapse
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Yes, GPRS works, but I use T-Mobile so I had to add a connection to T-Mobile GPRS. It should work with Cingular/AT&T as-is.
It should work on a SmartFlip, but I'm not sure if you need to CID unlock first.
Downloading and installed...
Attempt 1: Read everything within the Word file. Installed right from the RomUpdate program in the root directory of your
WM6 update. Didn't work, so I will attempt what you have in the Readme text file in my next attempt....
Attempt 2: The Update Utility program says version 3.12.3.1 on the title while the pictures you have in the word file says
version 2.99. Also, when I go through to update ROM, it verifies my current Image version as 4.1.502.5,
I click Update and the next screen it indicates that it will be updating from my current version to the
new version of 1.00.000.0. Then, a minute or so later, I get the following message:
ERROR [270] : UPDATE ERROR Image file is corruprted. Please check your Update Utility.
Do you know how I could resolve this matter because you do not list error 270
within your troubleshooting material? Your UpDate program is not even the same version!
Vista Home, Cingular 3125 unlocked with current released Rom version. So, what am I missing here?
Sorry, I shouldn't have included the Word doc, it's the standard doc that came with the RUU and happened to be in the folder at the time.
Are you using SoftSPL? You MUST use the SoftSPL, it won't work to just run the RUU. The doc I wrote is ReadMeWM6.txt.
You also need to CID unlock according to the sticky thread.
kumar00455 said:
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Click to expand...
Click to collapse
@kumar00455,
GnatGoSplat noted that this should work on any StarTrek, but there is something you should be aware of. In the past, it seems like a lot of people that have tried a Cingular ROM on a StarTrek that is not a 3125 model have not liked it, because they ended up with too little storage memory. This is because Cingular has loaded a ton of large crapware programs on their ROMs. Now, that isn't a big problem for the 3125, because it is actually different hardware from all other StarTreks - it has double the storage memory (128MB) all the other StarTreks (which have 64MB). Since GnatGoSplat has tried to make this just like a Cingular ROM, with all the added programs, you may find you have the same problem. However, I do think there is a thread here somewhere that talks about how to clean all the crapware off of a Cingular 3125 ROM and reclaim some storage memory.
@GnatGoSplat,
Thanks for putting this together - I think I will try it soon on my 3125! I would be very interested in a cleaned-up version and a kitchen as well. And of course, many thanks to Erofich and everyone else who worked on getting WM6 on the StarTrek. I thought we would never see this day!
Oh yeah, I forgot the 3125's have double the storage memory!
I'll make a slimmer, cleaner ROM as soon as enough people have tried this one to confirm it doesn't have any significant problems.
What apps are essential to keep in a cleaner ROM and which can go? What are typical apps that come on a Smartflip or 8500?
device PIN lock working?
Can anyone who has tried this ROM tell me if the security PIN lock works correctly without any problems? I sync my 3125 with my corporate Exchange server, and our IT people enforce a device PIN lock requirement through the Exchange server. So I have to enter a 6 digit PIN if the phone has been idle over an hour. Anyway, I'm interested in flashing this ROM, but if there is any problem with that functionality in this ROM, it would be a deal-killer for me... Thanx...
GnatGoSplat said:
Oh yeah, I forgot the 3125's have double the storage memory!
Click to expand...
Click to collapse
I do like your approach here, though. Start with something as much like the carrier ROM as possible until you know that it's pretty stable, then put it on a nice diet to make it lean and mean. Makes good sense to me...
GnatGoSplat:
i am in china. so i download this file so slow,can you send to me ?my e-mail:[email protected]
SoftSPL
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
guyver76 said:
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
Click to expand...
Click to collapse
Put it in the root of your device /not/ Windows. Start softspl.lnk as it says in the manual
I tried to use the program you directed the user to transfer. Everytime I clicked on it, I would get an error which stated that the link's program could not be found.
Don't get me wrong over here, I read the directions a few times and did everything you instructed. I am pretty good with directions and I am not one for doing things my own way. If I could help in anyway, just say something. I have alot of times on my hands and I am educated in matters, like, programming on my home desktop.
I made several attempts, I still get the same error, time and time again.
Are you trying to run the correct SPL? The one that looks like a square with a blue bar on top is the correct one. The one that looks like a piece of paper with the corner folded and a Microsoft icon in the center is NOT the right one.
Also, copy ONLY the files and NOT the whole folder. All these files need to be on ROOT folder of your device. If you're using ActiveSync, when you open your device icon, it defaults to My Documents so you have to go to My Device.
Okay, there we go. I copied the entire folder. Sorry. :O(
I'll make a new attempt in just a few.
UPDATE: I tried it, and now instead of an error, it just doesn't do anything. Sorry.
GnatGoSplat -
Thanks man, this ROM has been perfect so far. Just like my previous cingular rom with WM5. You did a superb job. This is just what I was looking for. Thanks Again!
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Churchill said:
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Click to expand...
Click to collapse
Its worth the wait!!
Thanks
Thanks for the reply i got it working now