Related
I know this is purely cosmetic but it really does bug me, lol!!
Anyone managed to get a 3G icon instead of the U on the 1.35 HTC SA ROM??
My original orange UK rom had this.....
S.K.
If u install the T Mobile Dailer, 3G Icon will be show!
ctohang said:
If u install the T Mobile Dailer, 3G Icon will be show!
Click to expand...
Click to collapse
What T-Mobile ext ROM should I get this from?? Tried the T-Mobile_UK_Vario_2_ExtROM_WWE.zip on the ftp but cant seem to find the correct cab.
S.K.
Hi
It should be the "MT_PC_Hermes_TMO_REG_060612.CAB".
scorpio16v said:
Hi
It should be the "MT_PC_Hermes_TMO_REG_060612.CAB".
Click to expand...
Click to collapse
Ok, tried installing this with no effect, the U is still displayed....
Any ideas?? Try after a hard reset perhaps with no ext rom installed??
UPDATE: Tried hard resetting and installing the whole ext rom from T-Mobile but have had no luck. Still have a U instead of 3G
Any other ideas??
S.K.
look at cab files installed in \windows\preautorun*
woh...tat's coool.....is that anyway to do it MANUALLY>???
I have installed this file!
http://forum.xda-developers.com/download.php?id=14522
Just only install it and reset!
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
I'd like also to change the 3g icon with the U. Thanks
while we are at it could we possibly make this so the G is an E??
sas90850 said:
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
Click to expand...
Click to collapse
Yeah!! This worked. Was a bit dubious about replacing my current dll with this one since the file size is only about 1/3 of the original but it worked!!
I now have a 3G icon istead of a U and so far have found no bad side effects.
I have also attached here my original dll so that people may change their 3G icon to a U if they so wish.
Instructions are the same as the quote, but you must copy to the device first and then copy it to windows using a file explorer on your phone. It will not copy direct to windows through activesync (Access Denied)
Cheers peeps
S.K.
sas90850 said:
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
Click to expand...
Click to collapse
When I did this, (1) I can copy the file from windows to my storage card as a backup, but (2) I cannot delete it, and (3) nor can I copy your file to overwrite the original one in \windows - it says, it is etiher access is denied, or the file is being used. Any idea whe I should do?
Thanks.
shogunmark said:
while we are at it could we possibly make this so the G is an E??
Click to expand...
Click to collapse
Hi
I've opened the phcanOverbmp.dll with "xnresourceeditor" and it contains only the symbol and the "two arrow-connection-animation" and some other icons.
The "G" must be in an other .dll.
You must only find the right one and then you can edit the icon to whatever you want.
Nicer 3G Icon...
Nicer 3G Icon....
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.QUOTE]
Strange.....
Now I cannot overwrite the file at all. Both on my pc and my device it says the file is in use
S.K.
silent_killa said:
Strange.....
Now I cannot overwrite the file at all. Both on my pc and my device it says the file is in use
S.K.
Click to expand...
Click to collapse
Hi
Maybe an program takes acess to the .dll ? I would try a softreset and switch off the phone-part in the comm-manager.
you've done it once, why it shouldn't go a second time ?
scorpio16v said:
Hi
Maybe an program takes acess to the .dll ? I would try a softreset and switch off the phone-part in the comm-manager.
you've done it once, why it shouldn't go a second time ?
Click to expand...
Click to collapse
Still no joy
The exact error meaasge I get on my phone using Resco Explorer 5.42 is "Cannot overwritefile 'phcanOverbmp.dll'. The process cannot access the file because another process has locked a portion of the file."
Shame, i'm trying to have a look at the Nicer 3G icon that has been posted here.
S.K.
Try to turn the phone off in communication manager
scorpio16v said:
Hi
I've opened the phcanOverbmp.dll with "xnresourceeditor" and it contains only the symbol and the "two arrow-connection-animation" and some other icons.
The "G" must be in an other .dll.
You must only find the right one and then you can edit the icon to whatever you want.
Click to expand...
Click to collapse
im not sure which dll it is for G icon.. i know the actual icons exist in the rom, i tried to replace them with E icons and same names but didnt work, so yes, there has to be a dll for it..
My friend had just flashed a new rom on his Raph100 and now he can't pass the align screen!!! So he flashed an official rom but, still he has the same problem. Would you plz help us?!
Did you hardreset after flashing new rom?
Greetz
Boris
Ramtin Madani said:
My friend had just flashed a new rom on his Raph100 and now he can't pass the align screen!!! So he flashed an official rom but, still he has the same problem. Would you plz help us?!
Click to expand...
Click to collapse
I had the same issue. i was asked to do the alignment for 3-4 times before it let me in. Once thing i felt in my case is the fact that i had a screen cover which tend to push the screen in one corner. So i removed the screen cover and i was able to move past the align screen. You can try this
Ramtin Madani said:
My friend had just flashed a new rom on his Raph100 and now he can't pass the align screen!!! So he flashed an official rom but, still he has the same problem. Would you plz help us?!
Click to expand...
Click to collapse
well to test to see if its the screen just create a txt file name it welcome.txt leave the txt file blank then rename to welcome.not make sure that you do not have a txt file extension or it won't work. put this file in the root of storage card and then do a hard reset and it will skip all that crap in the beginning then go to settings and try it that way.
Thank you very much dear friends
irus said:
well to test to see if its the screen just create a txt file name it welcome.txt leave the txt file blank then rename to welcome.not make sure that you do not have a txt file extension or it won't work. put this file in the root of storage card and then do a hard reset and it will skip all that crap in the beginning then go to settings and try it that way.
Click to expand...
Click to collapse
That is awesome and would have helped me immensely when I flucked up my touch screen!
After some tests, I've seen that the unique way to use an alternative program to view SMSes, even from "All messages" on Manila2D, is to replace tmail.exe... but after that some things no more work well, such email, activesync, etc.
I decided then to build a little HiJack to put over the original tmail.exe, that when we try to view SMSes it executes a link, while for ohter operations starts the original one.
tmail_hijack_1_0_0_0
Use:
1. make a copy of \windows\tmail.exe in \windows\tmailm.exe
2. overwrite the old tmail.exe with the new one
3. create in the \windows directory a link to the program we want to use for the SMSes view, and name it tmailsms.lnk
if everythink is right, when you press on "All messages" the new program will open up, while all the rest remains as is
l0v3r
Could You please throw in some screenshots? You know that a picture is always worth more than a thousand words.
worked for me (using vito sms-chat) but is there a way to have it open the sms app when i click on the message in manilla (it still goes to tmail)?
aiiro said:
Could You please throw in some screenshots? You know that a picture is always worth more than a thousand words.
Click to expand...
Click to collapse
There's no screenshot... it's a program hijack, nothing to see, sorry
swyecso said:
worked for me (using vito sms-chat) but is there a way to have it open the sms app when i click on the message in manilla (it still goes to tmail)?
Click to expand...
Click to collapse
No, I've not found a solution at the moment... I'll investigate more
l0v3r
Could you tell me how to rename the original tmail.exe? I tried to rename/delete/duplicate it in Resco File explorer but it just tell me "Access denied" and even I cannot copy the file to another folder. Thanks a lot.
reggme said:
Could you tell me how to rename the original tmail.exe? I tried to rename/delete/duplicate it in Resco File explorer but it just tell me "Access denied" and even I cannot copy the file to another folder. Thanks a lot.
Click to expand...
Click to collapse
You are right... I hope that somebody find a way do do it ... I created a copy by extracting it from the ROM image with Ervius kitchen (or any other kitchen able to make a dump)
Try closing tmail.exe using a Task manager before overwriting it with Resco Explorer or total Commander.
Hi... Good job
Your app does not work with new tmail.exe included in WM build 23071 dpi 96...
Can you solve the bug please?
can anyone repost tmail.exe i not follow instruction well also how i create link? ty
Can not overwrite or change tmail.exe ...
anyone have solution they can help? Thankyou!!
dang rippen offen
dude, this is a rip off,
i bet you used vj's identical codes....
vjbrisk.....
at least give him credit for the idea.
Can anyone plz tell me how remove tmail.exe I have try stop process but it will not let me!
darkmurder said:
Can anyone plz tell me how remove tmail.exe I have try stop process but it will not let me!
Click to expand...
Click to collapse
Sorry, have not enought time lately... to replace tmail.exe you have to rename it to whatever you want, and only after reboot you can delete the renamed copy... but place the new tmail.exe right after you renamed the old one, BEFORE reboot the device, otherwise a new protected copy of the old one comes out.
bevoc said:
dude, this is a rip off,
i bet you used vj's identical codes....
vjbrisk.....
Click to expand...
Click to collapse
No, its not the same: vjbrisk starts the program you linked, stop. This starts the program you linked OR the old one, based on the parameters it receives.
But, there are some situations on reboot that starts tmail with the same parameter (-service "SMS") and load the linked program on reboot (unwanted) but I have no time to check if its solvable.
l0v3r
l0v3r said:
Sorry, have not enought time lately... to replace tmail.exe you have to rename it to whatever you want, and only after reboot you can delete the renamed copy... but place the new tmail.exe right after you renamed the old one, BEFORE reboot the device, otherwise a new protected copy of the old one comes out.
No, its not the same: vjbrisk starts the program you linked, stop. This starts the program you linked OR the old one, based on the parameters it receives.
But, there are some situations on reboot that starts tmail with the same parameter (-service "SMS") and load the linked program on reboot (unwanted) but I have no time to check if its solvable.
l0v3r
Click to expand...
Click to collapse
Hey mate I cannot rename mine for some reason, it is checked as in rom in Total Commander and if I try rename it its either access denied or tmail.exe will just revert back straight after, does anyone know how I can remove this from a ROM or make it change its name as I have tried everything bar the latter? Thanks!
darkmurder said:
Hey mate I cannot rename mine for some reason, it is checked as in rom in Total Commander and if I try rename it its either access denied or tmail.exe will just revert back straight after, does anyone know how I can remove this from a ROM or make it change its name as I have tried everything bar the latter? Thanks!
Click to expand...
Click to collapse
Okay I managed to resolve my problem, if anybody is wondering how, get Total commander and rename Tmail.exe (even if the file doesn't rename) get the Vijay program (this Tmail didn't work due to not being able to get the name changed) then drag the Vijay program into the Windows folder. From there rename it to tmail.exe (so know you have two) then reset the device. From there then edit the .lnk's and you now have SMS chat for your SMS (and messaging which this program can fix if anybody can change it).
I want to edit my waiting cursor,using Resco,I tried several times to
copy shellres.192.dll from HD2\Windows\ to stoeage card,but all my
efforts was in vain, system deniede me.Can anyone help me? By the way,
I can use Resco to copy another shellres.192.dll to overwrite the
original one! Thanks!
you could try ROM Extractor, maybe it'll work
p107r0 said:
you could try ROM Extractor, maybe it'll work
Click to expand...
Click to collapse
Thank you a lot! Using ROMExtractor, I have another "shellres.192.dll" on my
storage card!
But another question:My purpose is to use ResourceHacker to chang BMP for
waiting cursor which is hidden in "shellres.192.dll". But when I Extract
"shellres.192.dll" from \windows\ to \Storage Card\, then I just copy it back to
windows,(didn't do anything else),I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
I don't know why. Please help me,if can. Thanks!!!
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
samsamuel said:
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
Click to expand...
Click to collapse
Thanks for the instruction! I use WinCE CAB Manager3.0 to make a cab named VagrantMan Wait Cursor.cab.
It shows the same result: the Wait Cursor works well, but I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
Are you kind enough to check my cab? Is there anything wrong?
I MADE THIS THREAD A FEW MONTHS AGO, DIDN'T GET THE ANSWER!! PLEASE HELP!
So, my brother backed up my Samsung Galaxy S4 on his laptop about 3 years ago. Can't remember the program used. He gave me the backup file recently. It's a .bak file which is 1.4GB.
(I screenshotted the file name and attached it here titled " FILE BACKUP TITLE.PNG")
I edited the file, to a .exe. (eg “Samsung SM-G350E_20191001_103009.bak” delete the bak and write exe after the dot and press enter.) That way I can access everything through winrar. However all of the files are encrypted! We have no idea what the password is, what shall I do! (Attached the "enter password" screen in winrar titled " RAR.PNG")
It has 1000's of photos from 2014-2017, I have no idea on what to do. I've checked out brute forcing, but I wasn't sure how to do it.
Thanks.
Here is two passwords mentioned that you could try... or use as base...
https://forum.level1techs.com/t/cracking-a-passworded-bak-samsung-backup/111141/23
'
Try to convert the password protected .RAR-file into a .ZIP-file which you then can easily open without any password protected.
jwoegerbauer said:
Try to convert the password protected .RAR-file into a .ZIP-file which you then can easily open without any password protected.
Click to expand...
Click to collapse
:good:
CXZa said:
Here is two passwords mentioned that you could try... or use as base...
https://forum.level1techs.com/t/cracking-a-passworded-bak-samsung-backup/111141/23
'
Click to expand...
Click to collapse
I saw this earlier this morning when I was researching it. It didnt work. :crying::crying:
jwoegerbauer said:
Try to convert the password protected .RAR-file into a .ZIP-file which you then can easily open without any password protected.
Click to expand...
Click to collapse
I'm not sure how to do that. Everytime I click on the file, it forces me to enter a password.
Are you sure that would work? It's not a rar file though. It's an application now, because I renamed it from .bak to .exe.
Thanks!!
(Attached screenshot of the standard file (the BAK file), then the edited one which opens through winrar (the application). Won't upload for some reason, (in the original post).
So basically, the file is a ".BAK" file, then same file was renamed to be an "application" file.
AkiraPerera04 said:
It's not a rar file
Click to expand...
Click to collapse
Try some hex editor to see its first few bytes. HxD is good...
Probably not a rar (Rar!), nor an exe (MZ), more likely a zip (PK).
CXZa said:
Try some hex editor to see its first few bytes. HxD is good...
Probably not a rar (Rar!), nor an exe (MZ), more likely a zip (PK).
Click to expand...
Click to collapse
Okay, I'll try that, hold on.
CXZa said:
Try some hex editor to see its first few bytes. HxD is good...
Probably not a rar (Rar!), nor an exe (MZ), more likely a zip (PK).
Click to expand...
Click to collapse
Okay, so I used HxD.
It's just a giant load of text, how do I know what it is?
AkiraPerera04 said:
Okay, so I used HxD.
It's just a giant load of text, how do I know what it is?
Click to expand...
Click to collapse
Opens in winrar - so there is limited number of candidates...
Try for example https://mark0.net/soft-trid-e.html or
take a screenshot from the start of the file...
CXZa said:
Opens in winrar - so there is limited number of candidates...
Try for example https://mark0.net/soft-trid-e.html or
take a screenshot from the start of the file...
Click to expand...
Click to collapse
Okay, I'll upload it on imgur. I keep getting a 404 error when uploading the attachment here?
https://imgur.com/a/RNQWYB4
Thanks!
jwoegerbauer said:
Try to convert the password protected .RAR-file into a .ZIP-file which you then can easily open without any password protected.
Click to expand...
Click to collapse
By the way, I tried that and it didn't work. Apparently winrar "cannot execute" it.
Okay, it's a zip. If older encryption is used then one known file could be used to decrypt it. Was it Advanced something that had that option??
Did that Wondershare Tunesgo ring any bell??
One could try use it again, mayby an old version and see if the files saved are in same order, etc...
CXZa said:
Okay, it's a zip. If older encryption is used then one known file could be used to decrypt it. Was it Advanced something that had that option??
Did that Wondershare Tunesgo ring any bell??
One could try use it again, mayby an old version and see if the files saved are in same order, etc...
Click to expand...
Click to collapse
Advanced? I'm not sure what that means?
Alright, I'll try that wondershare stuff now. I have seen it before, could be a subtle memory! Hold on.
AkiraPerera04 said:
Advanced? I'm not sure what that means?
Alright, I'll try that wondershare stuff now. I have seen it before, could be a subtle memory! Hold on.
Click to expand...
Click to collapse
It was advanced password recoveries from elcomsoft, but there are free tools for this known plaintext attack too. https://www.google.com/search?q=known+plaintext+attack+zip
Quite many variables that must match for it to work, but then again, only 12 known bytes is enough, of which at least 8 bytes need to be continuous, so only part of the known plaintext file is needed...
To see if it's even possible open it with 7-zip and see the encryption method.
It should be "zipcrypto deflate/store". Maybe also rar shows it....
If it looks like wondershare file, then using that password (that didn't work) as base could work. At least it would not take much time check numbers from 0-10000+++.
:fingers-crossed:
DELETED
CXZa said:
It was advanced password recoveries from elcomsoft, but there are free tools for this known plaintext attack too. https://www.google.com/search?q=known+plaintext+attack+zip
Quite many variables that must match for it to work, but then again, only 12 known bytes is enough, of which at least 8 bytes need to be continuous, so only part of the known plaintext file is needed...
To see if it's even possible open it with 7-zip and see the encryption method.
It should be "zipcrypto deflate/store". Maybe also rar shows it....
If it looks like wondershare file, then using that password (that didn't work) as base could work. At least it would not take much time check numbers from 0-10000+++.
:fingers-crossed:
Click to expand...
Click to collapse
Alright I see, I think you're talking about a bruteforce attack right? Do you have a link for a proper one? So far, none of them havent even started up properly yet.
Alright I see, how do I load the file onto wondershare aswell? There doesnt seem to be a dialogue for it at all.
Thanks.
jwoegerbauer said:
If the backup file really is RAR-formatted you can try RAR to ZIP Converter what is attached.
Click to expand...
Click to collapse
I see, I'll give that a try and let you know how it goes. Thanks!!
AkiraPerera04 said:
I see, I'll give that a try and let you know how it goes. Thanks!!
Click to expand...
Click to collapse
FORGET IT, I WAS MISTAKEN, because the backup file is proved to be ZIP-formatted.
jwoegerbauer said:
FORGET IT, I WAS MISTAKEN, because the backup file is proved to be ZIP-formatted.
Click to expand...
Click to collapse
Oh alright yeah lol.
So what shall I do now?
The other guy mentioned a brute force attack, but I cant find a program download that works.