Hello forum,
Two days ago I bought my first PDA, an HTC Hermes Vodafone, from ebay Uk. Because I'm italian I have tried to install the italian ROM ( ITA 1.18.258.2_1-17-07_SPL1.04_Radio1.27 ) . When I launched the update software, everything was seems to be fine..but at ~10% of upgrade the pda software sent to me an error 262. I followed the recovery procedure, but after did this, when the PDA try to boot up, it stay freeze at the HTC logo (before the procedure there was a vodafone logo) . If I boot the device holding OK+Power ON I can see the following lines:
HERM200
IPL-1.01
HERM200
SPL-1.04
Please, help me to restore this faboulous pda..I need it works again, also in vodafone rom versione doesn't matter, I wanna my pda back..
i have the same problem
I tried to run the Mtty.exe software,
this is what I obtain:
USB>
USB>task 32
Level = FF
USB>info 2
HTCSVODAP001©®±HTCEUSB>
help us, please guys
PS: If I digit lnbs SPL-1.01.nbs 50020000 I obtain the following result:
Command Error!
Have you read through the unbricking thread? http://forum.xda-developers.com/showthread.php?t=286755
Yes thank you, but I don't understand how to put the supercid on it, so I can proceed to unbrick the pda..
so the question now is, How can I put my phone in supercid mode if I can't copy the file to the phone?
i have the same problem
USB>
USB>task 32
Level = FF
in all xda-developers not have solution for this, y have read all and i habe searh and nothing found for this error
Problem solved installing the following rom
RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe
not one, but two times..cause the first time it was crashed with error 294, then, without unplugging the pda, simply restart the RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe .
This worked for me
bye
how to download this rom? y have search in brown toolbar up and:
Sorry - no matches. Please try some different terms.
I HAVE TEST 20 TERMS DIFERENT
Hi mate,
you can find all the roms links at this link
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Have fun!
Byee
Ma Herm200 Stops At Windows Mobile Logo
i triedto use pof's program (HTC_Hermes_SIM_CID_Unlock_v3a) and now apeears first the htc logo and under it appears:
(HTC LOGO)
M 05 No GMS
S 04
B 05 D 1.18
then appears vodafone and stops at windows mobile logo.
what shoud i do?
Related
hi everybody,
i am very sad today because i tried to unlock my SFR v1605 (french version of hermes) in order to put an orange sim card.
Everything was ok during the flash but at the end of the procedure i get an error message.
Since them, i can't flash it again, everytime i have an error message.
I have tried a lot of roms but anyone worked.
what can i do now
please help me,
Sorry for my bad english, i tried to do my best to be understood
Thanks
Read "Problem 5: Device shows NO GSM when booting" on the Common Upgrading Problems in HTC Hermes wiki page. Solution is there for you
i've read it but i don't know what rom i have to choose.
i am trying to flash with RUU172541FRA_SFR rom
but the screen of my pda is whit and i wait, i wait.0.. nothing's happen
The Himaupgrade software said
'the current software is now being erased, etc...)
..
totaly update should take 30 mn.
It is normal that when i want to flash actyvsync is not lauched automaticly?
please tell me what to do
on a french forum other guys have the same probleme and i want to help them, and help myself of course.
But now anyone have found the exact procedure to bring the pda alive
I put the instructions on the WIKI: Hermes_UpgradeProblems
A lot of people is having the same problem (you'll see NO GSM when booting), yesterday we found how to fix it:
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6. Type the following commands (do not copy paste!!!)
Code:
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. Reset your phone and put it back in bootloader mode
8. Flash the extracted radio ROM of your choice
Click to expand...
Click to collapse
Tanks you very much pof for you help
i am trying it
i will give you news as soon as i have results
my config
SFR v1605 - Herm200 - rom 1.23.163.3
what rom i have to choose?
my keybord is azerty?
ptiga100gene said:
my config
SFR v1605 - Herm200 - rom 1.23.163.3
what rom i have to choose?
my keybord is azerty?
Click to expand...
Click to collapse
you have to choose a radio rom only, it doesn't matter which one.
I have this message
checking information from your device
and it's very long....
that's is normal?
ptiga100gene said:
I have this message
checking information from your device
and it's very long....
that's is normal?
Click to expand...
Click to collapse
please read the wiki and the posts linked there it's all explained, i have no time now sorry
thanks for the time you spent for me
i respect all the procedure, but nothing.
i will try gain and again
if someone can help me
my msn
[email protected]
i have not find a solution
Does a rom exist for my french herm200 (sfr v1605) 1.04 azerty?
please help me
Please help me!
I screwed my german T- Mobile MDA Vario II. I used HTC universal sim unlocker and I haven’t got radio. I know I was a craze.
No GSM, no cid and no imei. The pda is working good.
I vas very happy when I find this site :
http://wiki.xda-developers.com/index...pgradeProblems.
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Please help me
At least your device is on bootloader 1.04
have you tried all the steps in "problem 5" on the wiki?
What the "MDA Vario II" is equipped with that one of "bootloader" 1.04 and I have done everything under "problem 5" unfortunately without steht. is carried out.
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
USB>
USB>info 3
CID: Wait interpreter timeout
HTCSHUSB>
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
USB>password 0000000000000000
HTCSInvalid password.R¿ËPHTCEUSB>set 1e1
USB>erase a0040000 c80000
HTCST ÚÈÒHTCEUSB>erase a0cc0000 c80000
HTCST ÚÈÒHTCEUSB>erase a1940000 640000
HTCST ÚÈÒHTCEUSB>set 1e 0
USB>
USB>
Upper CPLD version=0x4
Main Board version=0x6
Please help me
Try to flash a radio rom, and send me the USB Monitor capture exported in ANSI text format of all the radio rom flashing process.
Instructions for how to use USB Monitor are on the wiki "upgradin problems" page too:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
HElp me
Hello has a little lasted with me longer.
I hope you can help me at mine nevertheless problem!
Here is the ANSI file
The upgrade stops because radio bootloader doesn't answer to 'rerase' command after 3 retries. Repeat the steps on wiki "problem 5", do it several times. If you can't get it to work send it to repair centre.
hmm
would it use what if I make Rome one new completely, then?
gives it no questions possibility on the CID to circulate?
I don't understand what you mean.
Mummromeo, I also can't understand what you try to say. Send me a PM in german if you want to.
Another variation for this problem..
I am trying to recover my Smrtphone. I have a XDA First Trio. First I instaled a HTC ROM with bootloader 1.06. After I unlocked the SIM and CID. When I tried to install the ROM from Cirgular with Bootloader 1.04 the process stoped at 14% and now I have a mixed ROM with Bootloader 1.06... and I cannot unlock and install another ROM.... what I can do??? I am not an expert.. I dont know how to install DUmped Roms... I tried to follow the wiki but my device is locked and I dont know how to change the Key Entries.... HELP ME!!!! PLEASE
@rfgirardi: take any of the O2 XDA trion german ROMs found here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Try to flash it while the device is in bootloader mode, if you're not successful flashing then try to flash from SD card as described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hi pof,
Thanks for your help, but the procedures doesnt function... I runnede the Devicedata.exe and the file created doesnt have the information about the device... In the bootloader i have HEM100 IPL-1.01 and SPL-1.06. In the devicedata.txt cretaed I have just this
HERM100 1 0 0 å p 1.18
If i look in the System»Settings»Device Information I have:
ROM Version: 1.18.416.1
RADIO Version: Nothing...
Protocol Version: Nothing...
IMEI: Nothing..
Do you think I can try another procedure or just send the device to the workshop?
Rodrigo
rfgirardi said:
Do you think I can try another procedure or just send the device to the workshop?
Click to expand...
Click to collapse
As you can boot OS it could be downgraded to bootloader 1.04, but with a corrupted radio.
This is what I got for updating by doing this:
"Bring your bricked TyTN back to live"
http://forum.xda-developers.com/showthread.php?t=280425
With doing this, this is the only solution that will get me far enough for the boot screen to actually go white. The rest of the Rom's or Radio's don't got anywhere past this.
I hope someone can help me, no solution anywhere? Not even the Softbank chip can help.
I answered you on this thread:
http://forum.xda-developers.com/showthread.php?p=1078913#post1078913
Please do not double-post.
pof, I think it's time for a Sticky on this matter, cause it's becoming a common issue.
axiom said:
pof, I think it's time for a Sticky on this matter, cause it's becoming a common issue.
Click to expand...
Click to collapse
Yes, great idea... will make one now and let's see if we can keep all the bricked devices in one whole sticky thread. Hopefully we find a solution by joining all our efforts
Hi Pof,
I have the Unlocker that I payed to do the first unlock. After the problem when the Upgrade Rom process stoped at 14%, the feature doesnt recognize my device as a valid one. With this feature I cannot downgrade to 1.04. I dont know more what I can do.... but anyway, thanks for your efforts!!
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
He Guys,
Just my luck I have bought an HTC Tytn with the original Dutch rom and sim unlocked second hand.
I wanted to put a new Dutch rom from HTC on it but I keep on getting the ERROR [244] : INVALID MODEL ID but what I don`t understand is I have used the original Dutch rom from HTC. So I checked the device information and under the tab identity it says;
Model No.: H
Platform: PocketPC
IMEI: xxxxxxxxxxxxxxxxxxx
Shouldn’t the Model No. be HERM200?
Has anyone any suggestions in how I can solve this problem so I can flash any rom I wish.
I have tried al the cid unlock programs I could find and in bootloader it says;
H
IPL-1.01
H
SPL-1.40.Olipro
Thanks in advanced.
Use RAR to unpack the Original Dutch ROM.
Take the NBH file that you get when you unpack the ROM.
Put it in a folder with CUSTOM_RUU from Olipro.
Run CUSTOM_RUU and it will load up the ROM from the NBH file, bypassing the CID check. Should work
Thanks for the reply,
I have tried what you suggested but I still get ERROR [244] : INVALID MODEL ID I have also read these posts http://forum.xda-developers.com/showthread.php?t=322231&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=322119&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=309707&highlight=CUSTOM_RUU+from+Olipro and tried these suggestions but every time I get the error message. The radio update process was the same for me it will go to 7% and then give the message ERROR [244] : INVALID MODEL ID.
I have also tried the HTC_Hermes_SIM_CID_Unlock_v3a and Hard-SPL-V7 but still get the error message.
I hope I’m doing something wrong if not then I hope you have a new suggestion.
Thanks in advance.
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Junner2003 said:
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Click to expand...
Click to collapse
Did you read first post?
VivaErBetis said:
Did you read first post?
Click to expand...
Click to collapse
Ups, missed the bottom - thought it is the signature already! Sorry, haven't had my coffee yet!
Well, looks like the device is CID unlocked!
How about trying to flash an entire cooked ROM?
i would suggest the following:
flash a cooked rom (any)
see if that makes any difference to your model id
then try and flash the native dutch rom
good luck
Hi Guys,
As you suggested I tried a cooked rom the Hermes_WM6_vanilla still get the same error message when I put my device manually in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
But as soon as I try an official or cooked rom it shows;
H
IPL-SSPL by des
H
SPL-1.09.ds
I’m now trying Schaps_WM6Pro_WWE_4.00_Full_Beta3.exe and choose for auto detect and it said 1.40 Olipro and in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
And after 1% I got the ERROR [244] : INVALID MODEL ID message again.
I think my options are getting slim.
Your ModelID is stored on NAND and can be edited quite trivially (mostly).
how it got corrupted I don't know, however, the important question is; can you get into the OS?
He Olipro,
The device it zelf works perfect I can go anywhere I want even in the OS.
Just lead the way.
Changing Model ID
I have a similar problem in that my Model ID got corrupted during a radio upgrade. I now get the same error (244) and am stuck on SPL2.10 and can't downgrade to fix it. Can anyone tell us how to manually change the model ID in the NAND?
Much appreciated.
Dumping NAND
Ok, I'm a relative newbie so appologies before I get flamed. Thanks Olipro for giving me a clue.
I have now got spl 2.60 on my device but am unsure how to dump the NAND. I've worked out how to dump the 3 partitions from the device to dump the OS but am still unclear which part of the device is the NAND. I've read the Wiki on the memory map but am still not too sure.
Anyone able to give me simple instructions to dump the NAND and once I've done that where abouts is the ModelID stored? Do I do this using mtty?
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=322225
NAND Dump
Thanks Drummer for pointing me in the right direction.
Ive done this bit:
BTW, if you want to do a full backup of you FULL eeprom nand at any time, connect as before and type these commands:
plink HERMES > full.nb (hit ENTER twice)
task 32 (hit ENTER once and only once from now on after every command)
password 0000000000000000 - My device password is BsaD5SeoA which I used instead.
set 1e 1
rbmc me.txt 50000000 7fff800
watch your file grow to 128 MB.
It creates a full.nb file but it stays at 1k!!
** Note I have copied the bootloader file for spl 2.60 on my Hermes and ran that so I can now use that versino instead of the 2.10 thats on my device if that makes a difference and have tried with no joy with either version. Yes I know it says to use 2.30 but I can't work out how to get that on my device due to the ModelID error.
The Model number is contained within the herm1.nb file that was posted by BusStop in that thread. No need for complete NAND reflashing, only that section. You'll see it using a Hex Editor. You should write down your WiFi MAC addess, so you can edit it before flashing the file with the corrected Model number. Now you just have to figure out how to get SPL 1.01 MFG on your device...
Thanks Drummer. I did try flashing the herm1.nb file but of course as I do not have SPL 1.01 MFG it gievs an error. I'll keep trawling through the site and see if I can work out how to get SPL 1.01 onto my device. I'm not going to let this damn device beat me.
Ok so I worked out how to get the ModelID using getdevicedata. Used nbhtool to create a vaild nbh using the ModelID I'd just got and used the spl from 2.30 and it updated that fine.
Excellent.
However did the same with the MFG1.01 and flashed it and......
I now have a dead brick, no power and no response form usb. Time to get a replacement device.
Thanks for all the help I've had. I'm sure it should have worked.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Thanks for the advice Drummer however:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber - Nope red light goes out!
Mne shows HHHHHHH
Hi all, i've upgraded my radio and after my model id changed to H.
So, reading some posts i've used NBHTOOL.
1.I've decompiled an original Italian ROM
2.i've obtained a custom nbh selecting only OS and EXTROM and changing my Model number.
3. after that i've flashed the nbh resulting into a write error at 84% and a bricked htc.
Luckily i was able to reflash roms and i processed to second experiment.
I've made a custom rom with only the os, and it WORKED!
so my questions are:
1. can i use my htc even if my external rom isn't flashed (it cames from an old Schaps 4.0 succesful flash)
2. It is safe to proceed installing bootloader SPL using the nbhtool like i did with the os?
In that case i will be able to fix the model id problem by flashinh spl 1.01 and using the wireless fixing method you posted..
Thanks in advance for your reply!
Hi
From my understanding the Ext rom is mainly used for carriers to install there specific addons and customizations so it shouldn't be a problem.
As you can see I did flash spl 2.30 using this method and it worked fine ti was only when something whent wrong flashing 1.01 that my problem happened but I think that may be that I used an nbs file instead of an nb file from what I've read since.
Good luck.
Edit: Just noticed someone on this thread has managed it by going straight ot 2.60 http://forum.xda-developers.com/showthread.php?t=322225
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
Have you took the sim card and memory card out?????
Jay
yes they are both out when tryign to flash, been over a week with out a working athena
cowballz69 said:
yes they are both out when tryign to flash, been over a week with out a working athena
Click to expand...
Click to collapse
try flashing your original ROM which should be found in the wiki section.
ignore what I said below and report back if you were able to load your original ROM
***Ignore this read above**Once your phone is working , do the athena wrapper which should load SPL 1.2
Also read this
http://forum.xda-developers.com/showthread.php?t=429013
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
cowballz69 said:
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
Click to expand...
Click to collapse
I think this means your phone is not unlocked
with respect to sergiopi , you cant do the mtty script.
I would suggest you msg cmonex or try to talk to her on IRC on the
dxa-devs channel
addendum
seeing that you have nothing to lose, why dont you try flashing the original rom from the sd card using the method in the wiki
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
I have the same problem.
what I do...
I have ameo t-mobile...windows mobile 5.0
run AthenaUnlocker
Step 1 make all finish noc problem
Step 2 hung up on 60 %
bootloader no problem....but can´t flash original flash always stuck at 1% and reboot...
flashing the original rom from the sd card using the method in the wiki ...
make it, but no do...on screen see
cheking...
loading....
than come on screen
0002802
ching...
loading...
not allowed
sergiopi said:
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
Click to expand...
Click to collapse
My error when it stops at 1% is "invalid vender id"
my image version is demaged
Re: Ameo from t-Mobile german - repair
________________________________________
hi
what is your CID? use mtty command "info 2" to find out.
for example, if it is TMOB_007, you have to find a shipped athena rom with that CID.
if you cannot find a matching rom, let me know, i can still help,
cmonex
HTCS Þ?ÒtHTCE
please need halp
thx
felix999
read this post http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
in mtty this can read:
when type task 32
become LEVEL: FF
when type info 2:
HTCS Þ?ÒtHTCE
my CID is 1.1
on bootscreen can see this:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.10.RP00
what I do before...
Ameo WM 5.0 >>>>my mistake not update to WM6.0
run AthenaUnlocker
STEP1>>>OK
STEP2>>>by 60 % hang and stopped....
and now have the big problems.....Image ROM of t-Mobile 5.0 german demaged
can´t flash any rom´s
thx for hel or I want to pay bucks for service, when ma ameo live again...
felix999
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
this is my CID
Cmd>info 2
info 2
Wait interpreter timeout
HTCS Þ?ÒtHTCE
????????
don´t know
felix999
Athena mobile 6 > SPL 1.10
become today a answer from crazy cat, that olipro say must take an rom in athena forum....
I flaswh with so many roms...anytime same error: error 294 - invalid vendor ID.....
My SPL 1.10 >>> can´t find a rom with SPL 1.10
what rom can repair my demaged ameo?????
thx for help
felix999
problem solved with ONLINEHELP from>>>>>cmonex>>>><<:::::>><<:::E:::>><<:::R:::>><<:::F:::>><<:::E:::>><<:::C:::>><<:::T:::>>
thx
felix999
lakeman said:
try flashing your original ROM which should be found in the wiki section.
Click to expand...
Click to collapse
Is this how you solved your problem?