Hi mates i got PM300 its with user code lock then i tryed with jaf and select factory setting ,reset device button,and use service button then its give following message. i tryed with JAFWM
[16:14:18.484] ******** Starting Communication ********
[16:14:18.531] GetDeviceIdString
[16:14:19.796] Prophet 2.15.0001
[16:14:19.171] G4 chipset detected
[16:14:20.171] Establishing channel
[16:14:23.468] FACTORY RESET...
[16:14:23.468] completed.
[16:14:23.484] RESET DEVICE...
[16:14:23.500] completed.
[16:14:24.968] ******** Communication stopped
then i remove batterry and put back power on the phone now phone not switch on whats wrong with my step? please how can i review my phone then i tryed to flash phone but this version flash file dont have on support side please help me
THANKS
NASMI
please eny body help me to repailr this phone
THANKS
NASMI
reflash you OS Rom with the common provider firmware and try again!
NetrunnerAT said:
reflash you OS Rom with the common provider firmware and try again!
Click to expand...
Click to collapse
Hi mate thanks ur reply i flahed with JAFWM with this file now my phone hanging on i_mate logo how can i solve this problem
i flashed with this file
JAMin_WWE_1000925_10009114_11420_ship
THANKS
NASMI
question ... how you create this message?
[16:14:18.484] ******** Starting Communication ********
[16:14:18.531] GetDeviceIdString
[16:14:19.796] Prophet 2.15.0001
[16:14:19.171] G4 chipset detected
[16:14:20.171] Establishing channel
[16:14:23.468] FACTORY RESET...
[16:14:23.468] completed.
[16:14:23.484] RESET DEVICE...
[16:14:23.500] completed.
[16:14:24.968] ******** Communication stopped
about your problem ... what have you done? have you flash a firmware mit ext_rom? for a couple off months i have kick my prophet with a firmware they have write a damage ext_rom. I use any Step 1 from any WM6 Roms like PDAMobiz or PDAVIET too fix it.
If a Unit hang in the Splash Screen, you have a lot off possible errors. Damage Ext_Rom ... Damage Radio Rom ... wrong OS ... wronge Driver ...
NetrunnerAT said:
question ... how you create this message?
[16:14:18.484] ******** Starting Communication ********
[16:14:18.531] GetDeviceIdString
[16:14:19.796] Prophet 2.15.0001
[16:14:19.171] G4 chipset detected
[16:14:20.171] Establishing channel
[16:14:23.468] FACTORY RESET...
[16:14:23.468] completed.
[16:14:23.484] RESET DEVICE...
[16:14:23.500] completed.
[16:14:24.968] ******** Communication stopped
about your problem ... what have you done? have you flash a firmware mit ext_rom? for a couple off months i have kick my prophet with a firmware they have write a damage ext_rom. I use any Step 1 from any WM6 Roms like PDAMobiz or PDAVIET too fix it.
If a Unit hang in the Splash Screen, you have a lot off possible errors. Damage Ext_Rom ... Damage Radio Rom ... wrong OS ... wronge Driver ...
Click to expand...
Click to collapse
Hi mates thanks ur reply my problem is my phone come for user code then i tryed to reset with JAFWM after tryed its hanging on boot mode then i flashed with JAFWM with this file JAMin_WWE_1000925_10009114_11420_ship i flashed only NK NBF file only now my phone hanging on i-MATE startup logo now how can i solve this problem please help me
THANKS
NASMI
hi i am new here and facing the same problem handset came for security code and now is in boot mode help
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO CID (Request timeout on mtty.exe)
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you should superCID your device first", "It's your fault to use telstra wm6",....
Has anyone found a sulotion for this???
You Pm-ed me asking what to do and i pointed you in the correct direction so why have you started this thread?!
Hermes Unbricking Thread
and
Wiki page: How to unbrick your bricked hermes
EVERYTHING you need is there, you just have to read.
Maybe You do not read my Pm!
I have read all the wiki and thread concerning my problem several times!
The simple truth is that some phones are unrecoverable and have to be sent off for repair. Yours is one of these situations and I very much doubt that this will change. More and more of the pioneering technical guys will have updated their Hermes to another phone and the much admired POF has not been seen since he was accused of stealing...
The tacit feeling is that there is enough information and utilities to prevent people bricking their phones (i.e HardSPL and Update from MicroSD card) so if you do find yourself in this unfortunate position and can not recover your phone then you have to bite the bullet, and be better informed the next time.
POF accused of stealing !!!!????
What's that all about?
I dunno if I have a the same problem, but a similar issue, and trust me I am "PC guys, AMD fanboy, A+ tech:"whatever you wanna call i, I am expanding my horizons and I got into the mobile PC world. Trust me I am NOT Google lazy, i have read and read and read and researched and cross-checked and tried literally everything. I am stuck, I know what is wrong with my Hermes, I know where it messes up, and I DO see threads in other sites with 99.9% the same problem I have and I see NO soultion or anyone who knows or Really wants to help, I feel for Koorosh we need help, I have come to terms if have to send it away to repair. That bugs me I got it Literally 3 days ago, and ONLY used the OFFICAL AT&T WM6 Rom to upgrade
on my bootloader all I see is this........
IPL: 1.04
SPL: 2.03
I have too see in my display
IPL: 1.04
SPL: 2.03
when i can flash radio 1% and restart device!
try it
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
this will not work in this site again no solution for bricked spl2.03 cid locked
biswajitghosh said:
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
Click to expand...
Click to collapse
Do you know to read micro sd flash not work when device is not superCID!!!
I maybe have the same issue.
From the HTC ROM I flashed my device to Shannix Grass rom, a few days later I flashed to Satin Black rom, so far so good. After that I want to flash back to Shannix Grass and my deviced crashed. While booting he stuck at the HTC screen.
I tried to hard reset, flash another rom (stuck and reset at 1%), flash the bootloader (stuck and reset at 7%). After the failed ROM flashing I get error 270 image is corrupted.
In mtty I tried to format the NAND, and tried the erase command, nothing worked.
How can I diagnose the problem further. Is it possible to see why the ROM update failed or why the OS won't boot? I did some monitoring with USB monitor but I didn't get results where I get some conclusions of.
---
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
(My device is Herm200)
wow , i have the problem too. i almost live in phoneless .
.
SOLVED !!!!!!!! my phone now works
If your device became inoperable like mine, because i had a failed ROM upgrade,and the device failed to power up i have good news for ya.
MY DEVICE info is as below.
Problem:
Phone does not boot up, and looks like a red brick.
IPL: 1.04
SPL: 2.03
(it always gave an error 206 at 1% of any ROM update i tried)
Solution:
I downloaded the official WM6 ROM from the HTC's website below,
http://www.america.htc.com/support/8525/software-downloads.html
Then reset my device to the bootloader screen.
(holding the 'ok' button and the 'power' button and then using my stylus to push the 'reset' button close to the USB port.
i then disconnect the USB cable from my phone, and the display showed 'serial'.
i then ran the downloaded file, and waited till the collecting information from phone window came up, then i connected the usb cable back to the phone.
it connected, and VOALLA!!!... it started the update.
at least its better to have a working phone(without all the custom stuff), than none.
I hope this was not booring( with all the detail and all), but i hope it will help anyone out there who's device wont bootup.
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Um.... i cant say for sure
weyun0513 said:
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Click to expand...
Click to collapse
Well.. i can't say you should wait 1 or 2 seconds, but just plug it in as soon as you get that screen. i hope it works for you tooo.
what was ur exact situation beforeu can unbrick ur phone???
IPL?
SPL?
KITL??
NO GSM ERROR?
what was the rom that has bricked ur device??
where did it stuck during the brick phase?
is that 1st splash,2nd splash,...??
This method did not work for me!!!!!
Try the Official Cingular ROM
koorosh_bsboys said:
This method did not work for me!!!!!
Click to expand...
Click to collapse
My Hermes "red hot brick" happened when i tried upgrading to aCRCs_PHKv12r8, from a Schaps_WM6Pro_Hermes_4.31_WWE_Full ROM.
My device is a Cingulat 8525.
The upgrade went to the tricolor screen, and after 1% , my phone magically went off. I tried powering on, but it went to the tricolor screen again showing
IPL 1.04
SPL 2.03
and underneath showed "serial".
me too i'm having the same problem....any experts out there that could help us?
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
i can help u
hi pal i can help u i also had faced the same problem
ur radio board has been dislocated
pm me to make ur baby alive
u an also contact me on phone at +919823291495 or messenger
at [email protected]
What data you have in BL mode ?
callmelolo said:
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
Click to expand...
Click to collapse
Hi
Please download the Michy R4.1 and update it it will work. I had the same problem. My advice is "do not use password or pin while you are testing the new rom"
1. Do a hard reset By Vol Down+ reset hole press
2. Get into boot loader By Camera button pressed + reset hole press until you see the tricolour screen.
3. Then flash R4.1
Good luck
Hi Sabes,
I tried to install the 4.1 Rom and it loaded well. I had the boot screen where nothing was writen after the "R" of radio and then I went to the frist setting screen. It then asked to reboot to customize and since that moment black screen. The power led is on and nothing more...
**** ! it sounds like its definitely dead !
I don't understand anything cos I did nothing wrong, no droping, no tweaks, everything was working fine up to some day the phone function stoped working for unknown reason and now I have a black screen.
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
callmelolo said:
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
Click to expand...
Click to collapse
I have a couple of ideas but I would like you to get into the bootloader screen and tell us what you can see there
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
callmelolo said:
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
Click to expand...
Click to collapse
I think you have somehow lost your radio or it has become corrupted
Do you have one of the shipped roms?
Try flashing this as i think it includes a radio
even AP3 may have a radio included in the RUU
Flash this while you are in bootloader.
Or you could flash radio 1.58
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
callmelolo said:
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
Click to expand...
Click to collapse
Just a thought
have you removed your sim and sd card?
Yes I did...
Just finished downloaded the original Rom I will keep you posted with the results...
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Dear friend
I think you have to install the original rom on your phone , not another cooked ROM.
If you can do that , your phone will be downgrade to original spl .
dead htc advantage
kanwalgee said:
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Click to expand...
Click to collapse
my frnd i got the 100% same problem pls do let me know if u could get rid of it im also trying my best to solve this but im still there....
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
dead athena
kanwalgee said:
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
Click to expand...
Click to collapse
hi my frnd but mitty is giving me an error msg could u pls let me know how could i get orginal rom and how could i flash it...
Hello guys!
I have a big problem. I tried to flash HardSPL (via MemoryStick) on my raphael. After the flash process, raphael restart, but it starten with the tricolor screen and it shows me dthe massage "Upgrade ROM code error, please try again".
and a few seconds later raphael starts the proces again, after 3-4 tryouts the screen freez and now i can nothin do.
can someone help me?
sorry for my bad english.
best regards,
sasuke213
sasuke213 said:
Hello guys!
I have a big problem. I tried to flash HardSPL (via MemoryStick) on my raphael. After the flash process, raphael restart, but it starten with the tricolor screen and it shows me dthe massage "Upgrade ROM code error, please try again".
and a few seconds later raphael starts the proces again, after 3-4 tryouts the screen freez and now i can nothin do.
can someone help me?
sorry for my bad english.
best regards,
sasuke213
Click to expand...
Click to collapse
We need more info...
Is your phone CDMA or GSM?
Did you flash HardSPL from XDA?
Can you enter the boot screen and try to reflash the Hard SPL?
Problem #1 is that you need to flash hard spl off of a pc through a usb cable. Like it says in the thread (assuming you read it), you can't flash hard spl off of an sd card.
Try soft resetting, and see if the phone boots up normally. Did you flash the correct hard spl (incorrectly)? If you used a hard spl from the wrong device, the game may be over. My advice is to download the proper hard spl and to flash it according to the instructions in the thread.