My Jamin is totall stuck at the moment after ROM update of Prophet. I cannot even restore it to Factory Defaults. It was successfully upgraded started once but halted when i restarted it, now after the first screen, it only shows a white screen and stays there forever. i tried to restore it to factory defaults. was able to do that aswell but still no luck. the light stays there forever. Active sync ann LAN is showing Limited or no connectivity when i try to connect so i am unable to do anything. Is there any way to restore it back to its previous settings or do anything to make it work. The first screen which it shows only has the following information
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
kindly help.
if it goes into bootloader mode(press Camera button+ while pressing soft reset),download this http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe ,and flash it.....
bootloader
only if u can get into bootloader mode (reset + cam button)
c ya
I fixed my Jamin
Thanks Guys. It worked. I holded the camera key button on the side of the phone and pressed the soft reset key. Then leave the soft reset key but keep pressing the camera key takes the phone in the 3 color mode. After that i connected the USB to the computer and started the ROMUpdateUtility_NV_G4 file and it worked. Now everything is fine. Can someone now tell me from where to install new Windows Mobile 6.0 on my device? At the moment if i goto Device Information onmy mobile, following lines are there
ROM Version: 2.20.7.34 WWE
ROM Date: 7/10/06
Radio Version: 02.07.20
Protocol version: 413.1.03
http://forum.xda-developers.com/showthread.php?t=310452
Upgraded to WM6
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
fmmalik said:
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
Click to expand...
Click to collapse
4.0.0.0.4,has some HTC Touch software..... But,mate,there are 2-3 threads about it......READ AND LEARN...
Related
Hi everyone,
I've tried to upgrade my PDA from:
ROM version - 2.06.00WWE
Radio - 1.14.00
ExtROM - 2.06.100a
to
ROM version - 2.06.00WWE
Radio - 1.18.00
ExtROM - 2.06.100a
but it went wrong during the erasing proces. The only thing on my grey screen is USB and v1.02. I've tried the setup again but it keeps by zero percent during the erasing proces, followed by error 112. Also I've tried a hard reset but nothings hapens. After the hard reset the screen shows USB and v1.02.
Can someone please help me out.
Many thanks
powerkite
problem solved
I had ot give the device a hard reset (you know styles with on/off button) in combination with the button between both phone buttons. After this run the upgrade again. It will not show information of the device version, only the version you want to upgrade to.
good luck
powerkite
Hello Powerkite!
Hod did you manage to upgrade a Qtek2020 to rom version 2.06. I am lookingall over to do so, but I can't find a good (clean) solution.I am not a programmer or a computer freak therefor I am looking for an easy solution.
thanks
Eddy
Try the following link: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0
after Click the HimaUpgradeUt.exe
it show me the following information.
CE image version 2.06.00
Extended image version 1.72.181
Radio image version 1.18.00
after flash the rom, it can setup the machince until it's show the "Setup is complete. Tap the screen to begin using your device"
The machine hang at there, even can't power off the O2 xda2,
I need to soft reset the machine.
After reset, I note that is missing the camera function, both at program, and button menu.
Under the Setting -> Device Information.
Rom Version: 2.06.00WWE
Rom date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: (BLANK)
what happen to my camera and the ExtROM???
I have flash server time, same problems hang at the same place and lost my camera function.
Do you have any idea with it?
many thanks.
Hello every body;
Ihave upgraded my JAMin phone to wm6 4.0.0.0.6 PV-Touch, but without doing any activities on my mobile, the memory of the phone is decreasing till it reach a level that I have to restart. I have to restart more than three times a day or else my phone will hang.
Please any advice.
my phone detail is:
IPL: 1.00
SPL: 2.13
ROM version: 4.0.0.0 WWE
ROM date: 2/02/07
Radio version: 02.69.21
Protocol version: 4.1.13.30
ExtROM version: 4.0.0.6 PV-Touch
Try another radio ROM or reflash, sometimes that helps, and if you reflash, make sure you do a hard reset before you start and between step 1 and step 2 also one, and finalize with a hard reset before doing anything else when it is done.
If all fails, try another rom, the gullum v6 is very nice also.
tariqyounis said:
Hello every body;
Ihave upgraded my JAMin phone to wm6 4.0.0.0.6 PV-Touch, but without doing any activities on my mobile, the memory of the phone is decreasing till it reach a level that I have to restart. I have to restart more than three times a day or else my phone will hang.
Please any advice.
my phone detail is:
IPL: 1.00
SPL: 2.13
ROM version: 4.0.0.0 WWE
ROM date: 2/02/07
Radio version: 02.69.21
Protocol version: 4.1.13.30
ExtROM version: 4.0.0.6 PV-Touch
Click to expand...
Click to collapse
Don't know for sure it relates, but IPL 1.00 sounds a bit out of date...
IPL Upgrade
thanks for the reply, but how can I upgrade my IPL
there is nothing to do with IPL, it is a software problem I think, try to hard reset, back up data first please
but it will be useful to update SPL and IPL
I followed noobs guide, update the USB driver for vista, then went to bootload the device & try to force Hard SPL.
Inspite of following all given instructions my O2 XDA II showing connection error (Error 260, 264) & process stops, but in reality everything is well connected & correct.
Well, when Hard SPL program executing, I observe, it also not showing my old version @Upload (second stage of confirmation).
Is there any special process for O2 XDA II hard SPL & on vista os??
I followed all guides well; What do you think may b going wrong?
Giving below my Hima's config:
-----------------------------------------------------------------
Model No: PH10B
Rom version: 1.66.00WWE
ROM Date: 02/20/04
Radio Version: 1.08.00
Protocol Version: 1337.18
ExtROM version: 1.66.165
----------------------------------------------------------------
Hi, I have just purchased a second hand HD2 (Telstra Aust. stock) however it already had a custom rom on it (which i didnt like). I have been trying to install a new energy rom i can get the rom on and work except i cannot make any calls, I know the problem is the radio i have tried to install a new radio and when i go through the install stage it gets stuck on 0% and nothing happens. Im not sure which radio to use. The rom i want is: Energy.Leo.29007.sense2.5.Dec.7
My HD2 software details are:
OS version: 5.2.21869 (21869.5.0.82)
Manila version:2.5.19211619.0
Rom version:1.48.405.2 (71294)WWE
Radio:2.05.51.05_2
Protocol version: 15.28.50.07U
Any help would be greatly appreciated.
Switch phone off. Then while holding volume down button in, switch on the phone (keep holding vol down). The phone will boot into a multi-coloured screen. What spl version is displayed in the text showing?
You are correct about it being a radio problem. You have a .51 radio instead of the required .50 as explained in the Energy thread.
spl
im running 2.08.0000
Just download HSPL3 and replace your SPL2.08 to HSPL2.08
Then download EnergyROM and flash.
Make sure your RADIO is 2.08.50 and above. I prefer the 2.15.50 RADIO, but that is just me.
Thanks I will give that a go.
thnx man got it working just fine