Hi guys
I have a dead prophet in my hands. It came dead already and I dont know what happened to it. Basicly, screen flashes when I put the battery in. Cant go on bootloader by pressing the keys. Can only go in bootloader by shorting the charger to the pins ( 1 and 5 ). Bootloader dosnt stay on if I take the cables on. It stays on only shorting it. I manage put this rom from the imate
JAMin_WWE_213923_2139123_022021_ship.zip and had no luck . ROM update sucess but phone still in the same way. Im going to try a couple of more roms to see if I have any luck. Did anyone had a similar problem ? its a G4 so there is a chance that someone previouly tried a bad rom or even can be hardware problem.
Still .. any sugestion is good.
Thanks guys
Try the ORIGINAL wall charger and then put the battery in. That might work and once th accu has charged enough you can boot.
Might be the charging-bug.
My S200 is back for repair, crashd a couple of times and now it turns on, but see no display, no LED's.
Looks like a hardware defect, on active sync the S200 seems to work.
Hard reset's didn't work out.
The Phone is equiped with an original latest WWE ROM.
It seems to be a problem of these phone's, this is the second time it broke with this problem....
There is a difference with the former problem and my latest, the former my screen never came up, with the latest it came up after removing the battery for 15 minutes, but after an hour usage the S200 crashd or didn't show any display...
Hope they are able to repair the damn thing..., it wasn't a cheap device...
Another one here!
I'm the most stupid guy in the world. I was unlocking my G4 device with Lokiwize, and it killed my Prophet . I can't Turn it on without Charger. While trying to turn it on the LCD and LEDs just blinking and nothing will happened. I Need My Device, Anyone who can help me?
I think it's IPL Problem.
Before The Update:
IPL 2.x.x.xxxx
SPL 2.x.x.xxxx
After The Update:
IPL 1.x.x
SPL 2.x.x.xxxx
Please somebody Helppppppppppppp Meeeeeeeeeeeee
I have the same problem
i have the same problem - need help
just a flashing screen after some unlock procedure!!
ivocosta said:
Hi guys
I have a dead prophet in my hands. It came dead already and I dont know what happened to it. Basicly, screen flashes when I put the battery in. Cant go on bootloader by pressing the keys. Can only go in bootloader by shorting the charger to the pins ( 1 and 5 ). Bootloader dosnt stay on if I take the cables on. It stays on only shorting it. I manage put this rom from the imate
JAMin_WWE_213923_2139123_022021_ship.zip and had no luck . ROM update sucess but phone still in the same way. Im going to try a couple of more roms to see if I have any luck. Did anyone had a similar problem ? its a G4 so there is a chance that someone previouly tried a bad rom or even can be hardware problem.
Still .. any sugestion is good.
Thanks guys
Click to expand...
Click to collapse
hey frnd 1st of all charge your phone completely then upgrade your old wm5 rom through bootloader mode .....hope it works .....best of luck
Related
Dear Gurus ...
I need help. During the upgrading process, the connection was disconnected and my XDAII is currently not showing any sign of life.
I ran through the forum, and tries a lot of stuff:
1) try to reset it to bootloader (pwr+joy+reset) - nothing
2) change USB port - nothing
3) setting in MsActiveSync - nothing
There is no display on the screen right now. Even if I put it in to charge there is nothing, no flashing blue led etc ... just dead ....
One thing I noticed is that after removing the battery, and putting it into the cradle, there is a red led light up.
Currently I ran out of options and can only think off taking out the battery for the XDAII to drain completely (not sure if this could help me get into the bootloader mode).
Any one out there who has any bright ideas? Pls help as I am desperate to fix my XDAII .... thanks ....
alvinlim28 said:
Dear Gurus ...
I need help. During the upgrading process, the connection was disconnected and my XDAII is currently not showing any sign of life.
I ran through the forum, and tries a lot of stuff:
1) try to reset it to bootloader (pwr+joy+reset) - nothing
2) change USB port - nothing
3) setting in MsActiveSync - nothing
There is no display on the screen right now. Even if I put it in to charge there is nothing, no flashing blue led etc ... just dead ....
One thing I noticed is that after removing the battery, and putting it into the cradle, there is a red led light up.
Currently I ran out of options and can only think off taking out the battery for the XDAII to drain completely (not sure if this could help me get into the bootloader mode).
Any one out there who has any bright ideas? Pls help as I am desperate to fix my XDAII .... thanks ....
Click to expand...
Click to collapse
I had the same problem but I didn't loose hope. I kept on resetting it until I was able to get into the bootloader mode. It was black with some writings "SERIAL 1.06". When I put it back on cradle, Serial changed into USB 1.06. Tried to do the upgrade over and over again but didn't work. I put AC Adapter to my cradle and hard reset my unit, put back to the cradle, started the upgrade again and it worked. :wink:
twinkle said:
I had the same problem but I didn't loose hope. I kept on resetting it until I was able to get into the bootloader mode. It was black with some writings "SERIAL 1.06". When I put it back on cradle, Serial changed into USB 1.06. Tried to do the upgrade over and over again but didn't work. I put AC Adapter to my cradle and hard reset my unit, put back to the cradle, started the upgrade again and it worked. :wink:
Click to expand...
Click to collapse
Thanks!! I tried hard reset after 30mins with the battery out, nothing works. After I out in the AC adapter for 5 mins and tried a couple of times of hard reset, the screen came out with "Serial" !!!
YAHOOooo ... now I'm in the middle of uploading the ROM back ... thanks twinkle .... that just saved my day ..
alvinlim28 said:
twinkle said:
Thanks!! I tried hard reset after 30mins with the battery out, nothing works. After I out in the AC adapter for 5 mins and tried a couple of times of hard reset, the screen came out with "Serial" !!!
YAHOOooo ... now I'm in the middle of uploading the ROM back ... thanks twinkle .... that just saved my day ..
Click to expand...
Click to collapse
No problem... have fun! 8)
Click to expand...
Click to collapse
plz give me te steps coz i had the same problem, what do i have to do???!!
red LED when plug it to carger without battery........... plz
Same problem
@NightmarE
I have exactly the same problem!
If you find solution please PM
So many people have their XDA II gone dead while upgrading to the second edition rom. What went wrong during the process ?
adad said:
So many people have their XDA II gone dead while upgrading to the second edition rom. What went wrong during the process ?
Click to expand...
Click to collapse
There are several Golden Rules when upgrading - not just to SE, but any upgrade.
Always make sure the cradle is attached directly to a USB port on the PC and not through a hub.
Always make sure the power supply is connected to the cradle.
Disable USB in Activesync connection settings.
Disable any screensavers
If an error does occur, putting your device into bootloader mode and restarting the upgrade often proceeds OK.
Bootloader mode can be a little tricky to obtain as the multi-directional button has to be pressed directly down in the middle - not tilted up, tilted down, tilted left or tilted right, at the same time as pressing the power button and the reset switch.
It is very easy to assume bootloader is not working when it may just take several attempts before you get it right.
adad said:
So many people have their XDA II gone dead while upgrading to the second edition rom. What went wrong during the process ?
Click to expand...
Click to collapse
My qtek2020 dead because it's my mistake I upgrade it to SE correctly but with Chinese Version and before DCS post his ROM when I saw it's working better than my PDA2K I try to flash my qtek2020 with the PDA2K ROM ( I make some HEX editing ) but with no luck my qtek2020 is totally dead
Any body have solution !
How I recover from my dead XDA II ..
I have to agree with DCS that those are the rules and you need to follow them properly. It's not the ROM that's having the problem but the procedure needs to be followed.
In my case I didn't have the Sync cable properly connected (I bought a new sync cable & I didn't use the cradle) to upgrade the XDAII (duh!).. and I paid the price of having my heart droped on the floor ..
My nightmare started when the cable came loose halfway through the upgrade, so the XDA kind of "hung" and when I tried to reset it, it refuse to show any signs. Do a small test. My guess is as long as you take out the battery, put the XDA II into the charger (without a battery), and the red light comes on, that's a good sign.
For those who is stuck in this situation try this steps:
1) Remove the main battery
2) Leave it out for at least 30mins (to drain the backup battery)
3) Go make your self a coffee or watch TV (time flies faster than staring at your XDAII)
4) Put the battery back (at this stage it still won't work)
5) Put the XDAII into the AC Charger (give it a good 5mins charge)
6) Then keep doing the hard reset (just don't give up, it's like doing CPR, your XDAII will show "Serial 1.06" after a good hard resets ...)
Those steps above did work for my XDAII .... and it should work for most cases as I believe when we upgrade (the ROM) we don't touch the bootloader. Sometimes when we screw up, the XDAII got "hung" and it needs a good "cold boot". Taking the battery out won't help because the backup battery is still in. After a good "cold boot" the XDAII will boot into the bootloader and you can resume your upgrade ;-)
NOTE : Do keep your fingers cross through out the entire process.
PS: Thanks to DCS, Twinkle, mamaich and many others who contributed to this fine forum ... Long live the XDA I, II, IIs, III .... beyond ....
How to upgrade my BOOOTLOADER VERSION (it shows USB 1.01)
Is there a way to change my bootloader version from USB 1.01 to 1.06? I'm currently using T-Mobile MDA-II.
Thanks beforehand!
I have a big problem: this summer i dropped my MDA2 on a concrete floor and i broke the power button so I cant make anything but soft reset, or to remove the battery for 30 min for hard reset.
Re: How I recover from my dead XDA II ..
alvinlim28 said:
I have to agree with DCS that those are the rules and you need to follow them properly. It's not the ROM that's having the problem but the procedure needs to be followed.
In my case I didn't have the Sync cable properly connected (I bought a new sync cable & I didn't use the cradle) to upgrade the XDAII (duh!).. and I paid the price of having my heart droped on the floor ..
My nightmare started when the cable came loose halfway through the upgrade, so the XDA kind of "hung" and when I tried to reset it, it refuse to show any signs. Do a small test. My guess is as long as you take out the battery, put the XDA II into the charger (without a battery), and the red light comes on, that's a good sign.
For those who is stuck in this situation try this steps:
1) Remove the main battery
2) Leave it out for at least 30mins (to drain the backup battery)
3) Go make your self a coffee or watch TV (time flies faster than staring at your XDAII)
4) Put the battery back (at this stage it still won't work)
5) Put the XDAII into the AC Charger (give it a good 5mins charge)
6) Then keep doing the hard reset (just don't give up, it's like doing CPR, your XDAII will show "Serial 1.06" after a good hard resets ...)
Those steps above did work for my XDAII .... and it should work for most cases as I believe when we upgrade (the ROM) we don't touch the bootloader. Sometimes when we screw up, the XDAII got "hung" and it needs a good "cold boot". Taking the battery out won't help because the backup battery is still in. After a good "cold boot" the XDAII will boot into the bootloader and you can resume your upgrade ;-)
NOTE : Do keep your fingers cross through out the entire process.
PS: Thanks to DCS, Twinkle, mamaich and many others who contributed to this fine forum ... Long live the XDA I, II, IIs, III .... beyond ....
Click to expand...
Click to collapse
I'm trying and trying to hard reset it I can't see the bootloader, I discharged the backup batt already. Can you help here or is there any other suggestion?
Ps: If I remove the battery and plug the Ac.Adpt I can see here the red light , but if I put back the battery there won't be red light , is that normal ?
Bum pp
Sanity saved
Thanx to dcs i was able to get my device working again.
During upgrade (wich was also possible due to time and effort by DCS) my laptop went into standby for unknown reason.
So my xda got stuck in T-Mobile bootscreen
It was this thread and especially the posting by dcs wich saved my ass (and xda)
for i did not know about the reset with third button to get into bootloader.
Now i finally upgraded to 2003SE.
Thanx DCS!!
hello ,
i have the same problem.. somebody can help me or us??
thanks !!
qtek 2020 dead
i tried upgrading the 2020 to the diamond v1.2 but in the middle of it, the pc based application said that it isn't designed for my version of the phone and now i cant get out of the bootloader mode can any1 help me with it i have the original 1.66 rom from the qtek site but the problem is that it too requires activesync to be started initially ... how do i get outta this mess cuz the hemaupdate and the update utility i got from the qtek site requires the phone to be synchronized using activesync first... can any1 help me with it i need help urgently ....
upup... if somebody can help us ..
Re: How I recover from my dead XDA II ..
alvinlim28 said:
I have to agree with DCS that those are the rules and you need to follow them properly. It's not the ROM that's having the problem but the procedure needs to be followed.
In my case I didn't have the Sync cable properly connected (I bought a new sync cable & I didn't use the cradle) to upgrade the XDAII (duh!).. and I paid the price of having my heart droped on the floor ..
My nightmare started when the cable came loose halfway through the upgrade, so the XDA kind of "hung" and when I tried to reset it, it refuse to show any signs. Do a small test. My guess is as long as you take out the battery, put the XDA II into the charger (without a battery), and the red light comes on, that's a good sign.
For those who is stuck in this situation try this steps:
1) Remove the main battery
2) Leave it out for at least 30mins (to drain the backup battery)
3) Go make your self a coffee or watch TV (time flies faster than staring at your XDAII)
4) Put the battery back (at this stage it still won't work)
5) Put the XDAII into the AC Charger (give it a good 5mins charge)
6) Then keep doing the hard reset (just don't give up, it's like doing CPR, your XDAII will show "Serial 1.06" after a good hard resets ...)
Those steps above did work for my XDAII .... and it should work for most cases as I believe when we upgrade (the ROM) we don't touch the bootloader. Sometimes when we screw up, the XDAII got "hung" and it needs a good "cold boot". Taking the battery out won't help because the backup battery is still in. After a good "cold boot" the XDAII will boot into the bootloader and you can resume your upgrade ;-)
NOTE : Do keep your fingers cross through out the entire process.
PS: Thanks to DCS, Twinkle, mamaich and many others who contributed to this fine forum ... Long live the XDA I, II, IIs, III .... beyond ....
Click to expand...
Click to collapse
Just searching through the old threads and I found this post by alvinlim28. I have the same simptoms, white screen, won't start, I get the red light when I remove the battery and place the hima in the craddle, so I guess I'll be up all night trying to get into bootloader and reflash. Thanks all for the contribution in this forum, and thank God for the search option
J.
No luck tonight, I'll keep trying tomorrow gtg to sleep now.
cheers,
J
damm*t still nothing
I've been tryin' all day, and I'm unable to enter bootloader mode
I upgraded my himalaya to WM5 using llbasha's rom. Everything was ok, all functions of my device was working. But one day i saw my devices screen was shaking like a old tv near a ringining cell phone. When i reset my device i see screen become white and device dont turn on. I charge battery on cradle and try about 4-5 times to turn it on i turns on but turn it on is really hard. I tried to downgrade it to WM2003 or some other roms but himaupgradeut doesnt recognise my devices rom and extrom or ce version. I tried to go on to flash the rom. Flashing finished but it was still WM05 but with WM2003se splash screen. And still screen was shaking ang still i was living white screen problem. I checked sccren connector and it was ok. Whenever i look bootloader it shakes too. I think problem is about device, not about display because when i live white screen problem any of lights turn on or any buttons work. If anyone can help me or give any advice i thank a lot.
Best regards
Azkuhraad
Solved
I solved problem by changing mainboard of device.
Hi All,
My Prophet just died...
I made a RadioROM upgrade and after a reboot I did an IPL upgrade. I did a soft reset and now it doesn't want to turn on. I'm really confused what did I make wrong and how can I redo it.
I'm looking forward to a helpful info.
Thanks
Does your screen stay black or does it display anything? Can you enter bootloader? And why would you want to upgrade your IPL???
My screen is dark black, I can not even turn it on. I doesn't matter what sort of switch I press on the dev. So I can't see the bootloader and I think it's a serious problem...
After the IPL upgrade the reboot was succesful and on the startup screen it says IPL 2.20.0001 and worked for a while.
I've changed my local settings, which reqiures a soft reset, so I did it. After this, no aswer...
I'm very dissapointed because of the pda and your help dear all...
Is your battery dead? Try it with your charger.
No, my battery was fully charged before I ran into this major problem...
I had a similar issues which was misteriously resolved after a few plug ins and battery removals. I also let the battery completely drain and removed it from phone for a few hours. It worked when connected to wall charger but not with battery. It seemed like interior phone battery was dead. One day I connected it to the wall charger and the battery status when from zero to 98% and it stayed there. Really weird stuff. I ordered another battery and so far so good. One of the batteries did die and i discarded it, but I still use the other old battery plus I have a new spair.
Yamilrx, thanks the info...
I'll try it, but I've lost my faith in this device. It's in clinical dead state for 2 days from now, and it looks like doesn't want to wake up or alive.
This is a very misteroius issue.
I don't understand it, if I upgraded wrongly somebody tell me, why was the device started after? And if it was a wrong update, how can I turn it on and make calls, etc. and after a soft reset it DOESN'T reply for anything?!
I bought it almost 2 years ago, so I assume the battery could cause similar problem. But it was almost fully charged. The Star Wars was less incredible then this thing...
Except this, I'll accept your advice. I'm going to try it.
try the following, as your device is dead and curently noy useable.
-remove the battery for a day and just leave it there
- put in the battery and connect the charger
- hold your camera button while turning the device on
do you get into the 3 colored screen? if so, the device can now be downgraded etc.
particular reason why you have not tried a HARD reset?
Dhirmadi said:
try the following, as your device is dead and curently noy useable.
-remove the battery for a day and just leave it there
- put in the battery and connect the charger
- hold your camera button while turning the device on
do you get into the 3 colored screen? if so, the device can now be downgraded etc.
particular reason why you have not tried a HARD reset?
Click to expand...
Click to collapse
Thanks, I'll try it first after go to a shop and buy a battery.
Anyway, when I mentioned I've tried all the combinations of the buttons, I meant i did a hard reset too. But my Spleeping Beauty is still doing the same...
The problem hasn't been solved by the solutions you have mentioned before, so I've called the HTC technical support, they were very friendly - they must be because I'll pay for it - and 2 days from now they will tell me how much does it costs or it is repairable or not...
Thanks for your help.
mazeee said:
Thanks, I'll try it first after go to a shop and buy a battery.
Anyway, when I mentioned I've tried all the combinations of the buttons, I meant i did a hard reset too. But my Spleeping Beauty is still doing the same...
Click to expand...
Click to collapse
I did that with mine to see if it would reset device once the internal battery is totally discharged. Like I said earlier, mine came back to live. Make sure you install the WM 5 rom used for downgrading and don't try any of the WM 6 roms until the device is fully functional with wm5. The batteries are $8 on ebay but they take 1 week to get here from Hong Kong.
If winter comes,can sping be far away?
Hi All,
The service technician examined my Prophet and he said, I have to change a mainboard. Have you ever run into this kind of problem? If I want a repair, it'd cost me 300 Euro!!
Luckily I still have a warranty, so I hope I don't have to pay for the service.
Take care your Prophet...
Ok, so first off, I upgraded to 6.1 from 6.0 a year ago. I am using SPL 2.40 and radio 3.27
I was looking at the 6.5 roms and thought maybe it was time to upgrade again. I tried the last 2 6.5 roms and found that after flashing my camera and speaker stopped working. So then thought I may as well down grade back to 6.1
I was using dcd 1.3.0 (I think) originally but then saw that the next stable version was 2.3.2 so decided to use that.
After flash all was good with the world. Camera ok, speaker ok, all good. about 24hrs later my phone shut down (with a fully charged battery). I tried to turn it on and nothing happened. Plugged in the wall and then the PC still nothing. I also tried to boot into the boot loader (power+Camera+reset) still nothing.
Am I out of luck? Can I get a service doc to trouble shoot myself? or do I now own a PPC paperweight?
Thanks for any help (I did try searching the forums but found nothing like this for the 6800)
Big mistake. That old of a dcd rom is probably 6.0. You might have messed your phone up good. Does it light up if you plug it in? If so what color? You need something like DCD 3.3.4.
Can you put your phone into bootloader?
No it literally will not power on at all. Boot loader or otherwise. Also no led when plugged in the wall or in the PC. I think it fried a chip or something. But it did work fine for about a day or a day and a half. As well when it shut down I wasn't even using it. It was in stand-by mode. If I could track down a service manual I may be able to trouble shoot the chip, but have already paid for one site with no luck and don't want to repeat that (could add up )
Pull the battery, make sure it's unplugged. Put the battery in. (You need to press power button for 1 second to turn it back on) See if any lights come on, if so press power + camera and hit reset, if it gets you to the Bootloader screen, you can just flash up to a newer rom.
If you had 6.1, you probably had a GPS enabled radio, and therefore can install any V3.x rom from DCD and be back up and running.
When you first power it on, it has some numbers in the bottom right corner, if they will show up, write them down and post them back here, from that we can determine which rom you need to install.
BTC
if you can get it into bootloader, i would flash a newer radio before anything else. youre doing some serious version jumping, but generally any custom rom you flash should be using radio 3.42.50. also, 3.2.5 or 3.2.6 are completely stable.
Nope, still not powering on... tried everything I could think of and some stuff I didn't. As far as firmware goes I was using 3.27.00 with SPL 2.40 Bootloader.
If I can't figure it out, I need to decide if I am going to buy out the last year of my contract, get it repaired (if possible), or buy a new one at full price (ouch).
After this phone nothing else will do for me LOL... I love my WMPPC!
I'd try charging the battery with another Titan or with a battery charger.
Another thing to check is whether you get a red LED light when you have the charger plugged in to the phone, but no battery installed.
Ok, so it seems that it is totally unrelated to the flashing process. I opened the phone today to see what I could see. A few weeks ago the vibrate stopped working and I figured that the motor burned out and didn't worry about it. Well it turns out that the little bit of glue that holds the motor in place gave out and it was moving around in the phone. It finally crossed a couple of terminals and shorted out the board. Thanks for the input guys. Got another Titan on the way to play with now
Hello guys!
My TG01 is fully bricked. The lqst thing that I did with the TG01 was to delete 2 SMS and after 30 minutes when I wanted to make a call the phone was completely dead. It does not power on and even when I put the chrarger the orange does not light up. The last time that I flashed my TG01 was in August with ffboy clean 6.5. Ok of course i have played a lot with the linux kernel and i have tested different things. The last thing that i was doing with the linux was the bluetooth driver hence it was like a week that i did not do any hacking so i find it really hard that the phone is bricked by the linux kernel.
I will try the TG downloader with the USB drivers to see if it will come back to life. Either way yesterday I bought an HD2 and I put android inside it is amazing and really even windows mobile works well on HD2.
If the phone is fully bricked i will stop ToshDroid, sorry guys !!!
Cheers,
Endri
PS: I anybody has recovered his phone with the same problem as mine, please give a hint
Hello,
If you haven't got the orange led when is in charged, I think pearhaps the battery is dead ...
Can you test with another (or test the battery)?
For me it's not a software problem .. it's hardware ... So TG downloader can't do anything ...
I hope you can repair it !
I've encountered similar problem before.
When it was on charger after I hold power button, the charger led dissappeared for a moment and nothing happened.
Try charging it for a longer while, but first:
1)remove the battery
2)put it back inside
3)don't press ANYTHING
4)plug the charger again.
Apparently there is a bug which causes big energy drain when the phone is "bricked" so the charging procedure takes a while.
5)after few hours try turning it on again and report in this thread; I think we can figure something out
Also if you have a HD2 charger, try that with your TG01
This happened to me, I had been using my TG01 for nearly a year then I switch my phone off to charge overnight and plug into my TG01 and nothing happens. I turned off and on, removed battery, sim card etc but no good.
I borrowed a HD2 charger from a friend and that works fine and my TG01 charger works with a friends Nokia so I got myself a HD2 charger off EBay and I use this all the time.
So give it a go, one day out of the blue my TG01 refuses to charge and I know the charger works etc but I have to use HD2 charger.
dr_strangetrick said:
Also if you have a HD2 charger, try that with your TG01
This happened to me, I had been using my TG01 for nearly a year then I switch my phone off to charge overnight and plug into my TG01 and nothing happens. I turned off and on, removed battery, sim card etc but no good.
I borrowed a HD2 charger from a friend and that works fine and my TG01 charger works with a friends Nokia so I got myself a HD2 charger off EBay and I use this all the time.
So give it a go, one day out of the blue my TG01 refuses to charge and I know the charger works etc but I have to use HD2 charger.
Click to expand...
Click to collapse
It does nothing actually i think that my TG01 is really dead ...
endrix said:
It does nothing actually i think that my TG01 is really dead ...
Click to expand...
Click to collapse
I had exactly same problem!
Nothing worked from the forum, it stayed like a brick whatever I did. However, I did notice faint white light on the screen, but no red/orange light on top, no vibration nothing!
Sent it to Toshiba Workshop - seems they had to load some sort of 'boot loader file' :S Din't give me much details, but I guess if you can grab a 'boot loader' from somewhere, that's all it might need - Just a guess from experience!
hi endrix,
you doing here a really good job, thank you.
"If the phone is fully bricked i will stop ToshDroid, sorry guys !!!"
why stop, make a break and send your tg01 to repair
best regards, miro
Hi Endrix, what's happen with your phone ? Have you solve the problem ?