i used to connect to the microsoft sync program i also used wm5storage program so i can use it as a removable drive. it has the 2.26 rom and it's unlocked i can use tmobile which was the original and unlocked it to use cingular which i have now. now it wont connect both ways neither the sync program or wm5storage. it used to b4 but not anymore it started today. on the microsoft sync it says no device connected and usb error. i checked my phone settings and is good. any help is appreciated. i need to get my contacts back since i did a clear storage to see if that helped but no luck. thanks in advance.
dominicanodcora said:
i used to connect to the microsoft sync program i also used wm5storage program so i can use it as a removable drive. it has the 2.26 rom and it's unlocked i can use tmobile which was the original and unlocked it to use cingular which i have now. now it wont connect both ways neither the sync program or wm5storage. it used to b4 but not anymore it started today. on the microsoft sync it says no device connected and usb error. i checked my phone settings and is good. any help is appreciated. i need to get my contacts back since i did a clear storage to see if that helped but no luck. thanks in advance.
Click to expand...
Click to collapse
anyone?????
I had the same exact problem with my 8125. I tried to find a solution for 2 days. I finally found this solution. Follow this threads instructions it should get your device to sync with the pc again through usb.
http://forum.xda-developers.com/showthread.php?t=302459&highlight=usb+wont+connect
Good Luck
baddoger said:
I had the same exact problem with my 8125. I tried to find a solution for 2 days. I finally found this solution. Follow this threads instructions it should get your device to sync with the pc again through usb.
http://forum.xda-developers.com/showthread.php?t=302459&highlight=usb+wont+connect
Good Luck
Click to expand...
Click to collapse
well mine was a little different. one of the usb pins on my phone port was broken. don't know how. cuz i tried my friends mda on my computer and it worked perfect. thanks for ur help anyways.
dominicanodcora said:
i used to connect to the microsoft sync program i also used wm5storage program so i can use it as a removable drive. it has the 2.26 rom and it's unlocked i can use tmobile which was the original and unlocked it to use cingular which i have now. now it wont connect both ways neither the sync program or wm5storage. it used to b4 but not anymore it started today. on the microsoft sync it says no device connected and usb error. i checked my phone settings and is good. any help is appreciated. i need to get my contacts back since i did a clear storage to see if that helped but no luck. thanks in advance.
Click to expand...
Click to collapse
May be you can change anyother USB Port to try,or you can take your phone to your friends' computer,maybe any wrong with your computer system
wry28 said:
May be you can change anyother USB Port to try,or you can take your phone to your friends' computer,maybe any wrong with your computer system
Click to expand...
Click to collapse
i tried everything. it's my phone. i used my friends phone and it syncs.
^^^^^deleted^^^^^
Related
Please help! I have a Softbank HTC Tytn and just came across this amazing forum today. I'm a techno-literate person so this is even more frustrating... I simply cannot get Activesync (or my laptop for that matter) to recognize my Tytn...
When connected via USB it appears under Network Adaptors in my Device Manager as "Windows Mobile-based Device #3" and has the ! because it has no drivers.
I'm using Activesync 4.2 worldwide English version downloaded from the Microsoft site.
Please help me, I became very excited at the prospect of unlocking this awesome phone but then was crushed to find I couldn't even begin the first step!
I have the USB cable plugged directly into the laptop, not via a passthru like a hub, and I have tried it in multiple ports without success.
Save me guys, please!
Perhaps my problem is that I don't have a driver for the device that allows Windows XP to recognize it?
Could someone please post a link, or the file itself, of the driver you use for your HTC?
You should not need any special drivers just for activesync or usb-serial connections to the device.
Drivers are only needed if you want to use it as a modem.
then has anyone else had this problem? do you have any suggestions pof? this is driving me nuts...
Shaderach said:
then has anyone else had this problem?
Click to expand...
Click to collapse
Never heared before.
Shaderach said:
do you have any suggestions pof? this is driving me nuts...
Click to expand...
Click to collapse
Disable activesync if it is connected, put the device in bootloader mode and try to connect to it using mtty. If you get the "USB>" prompt you can do everything, you don't need activesync at all for unlocking or flashing roms, everything can be started with the device in bootloader mode.
if it sheds any light on the problem, when i plug it in instead of the usual "do-doo" rising intonation sound you get with a successful USB interface, i get a "duhduhduh" meaning it's connected, but not recognized...
ok i'll try that, sorry i wasn't aware that getting activesync to work wasn't a prerequisite for the other steps
i've never felt so stupid
i've downloaded mtty, and read and reread the wiki
my hermes is in bootloader mode, and mtty connects on port 3 but i don't get a USB> prompt, i just get a window named "COM3 115200 N-8-1" and a nice empty white space
i have no idea what to do now
i was planning on following this seemingly effortless writeup/summary by okinz:
http://forum.xda-developers.com/showthread.php?t=280566&page=9
but now i've got nothing.
i'm really sorry to bother you, but please don't give up on me!
i cannot make a connection using USB with mtty btw... forgot to include that
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
pof said:
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
Click to expand...
Click to collapse
1) yes, no connection
2) i just tried just plugging in the Tytn on my roommate's laptop, he got a different usb message, windows recognized it as a "Generic NDIS device" but failed to install it for lack of driver, is this what is supposed to happen? mine doesn't do this at all
3) windows XP SP2
update - just rebooted for about the 10th time and this time it recognized it as an NDIS and activesync has found it
i guess it was just a windows thing... *shrugs* i'll post again once i've tried the next steps
thank you pof, thank you very very much for sticking with me
Shaderach said:
thank you pof, thank you very very much for sticking with me
Click to expand...
Click to collapse
no problem
glad you solved the issue
i just want to let you know that i've got everything working and fully converted now
please close this thread, and know that everyone here has my heartfelt thanks
hey everyone I am wondering if you are able to help me.. I recently upgraded to modacos custom rom V3. I have been using it for a while now an during that time i have had to wipe my laptop, i lost everything on there.. When I rebooted the laptop an tried to connect my Hero to it I am unable to mount my phone.. It doesnt show up on the notifications screen, i have installed HTC sync an rebooted the phone an still nothing. If any1 is able to help me thatd be great..
Kind Regards, Brett.
please anyone who is able to help me that would be greatly appreciated...
Check if 'HTC driver' is installed as well; you should be able to find it in the "HTC" folder in your start menu if it is. If you can't find it, try reinstalling HTC Sync to make sure the drivers are installed.
hey steven, yeah the driver is installed.. I am going to uninstall HTC sync an re download it , hopefully it works after that. if anyone else has any ideas thatd be great.. thanks guys
Have you tried:
1. Attaching the device to a different PC
2. Using different USB cables
Note that several people on these forums have found that changing cable has worked for them, even though the cable that didn't work seemed to be fine for other devices, so it is definitely worth a try.
Regards,
Dave
hey mate, i just reinstalled htc sync & no luck there.. I have already tried connecting on other computers an no luck there, i will look for another cable next week sometime an hopefully that helps.. thakns for your help.. cheers, brett.
i'm having the same trouble!!!!, it won't mont either on my mac or pc , any help please!!???
well i ended up buying a new usb cable an its mounting fine know.. hope this helps for anyone in the future.. cheers
Glad you got it sorted out with a new cable.
For anyone else having problems with mounting, make sure you're connected to a USB 2.0 port. I had the same problem but everything started to work once plugged in to USB 2.0
Sounds like USB port is broken.
Hi all,
I've read a couple of threads for several days now, but none of the answers worked for me.
Problem is: I can connect from my HD2 to my desktop PC (win 7) initially, but when I try to install a new ROM (3.14.407_2), my HD2 restarts, shows the four colour screen and nothing more happens. After some minutes, my PC tells me that my phone isn't connected anymore.
It worked two months ago for the last ROM flash, but now nothing helps.
Tried:
- rebooting PPC and PC several times
- deleting partnership and setting up a new one
- disabling "faster connect" for usb to PC settings - afterwards, PC doesn't recognize any connection at all
- hard reset on PPC
I have no idea what to try next.. I wanted to install HSPL2 and flash the ROM from my SD card, but can't install HSPL2 ... same problem.
Any suggestions?
Thanks
Infyrana
I also tried several USB ports on my PC
You think the HD2 USB port is broken? But I was able to transfer data when connected as normal device without active sync.
Do I have any chance to check, whether you are right, without having to send my phone to HTC?
maybe running the update in compatibility mode will help?
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
You could try using BlueTooth with ActiveSync, thats what I do. I have a "micro" bluetooth adaptor for my laptop and it all works fine... just a bit slower.
A
Infyrana said:
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
Click to expand...
Click to collapse
the compatibility mode for the ROM update file could help becasuse it is a separate application (no guarantee though as I have no way to check it on my PC)
compatibility mode didn't help.
don't have a bluetooth stick ...
no further suggestions?
Just found out, that windows tries to install driver "Qualcomm CDMA Technologies MSM" when I connect my HD2 after starting bootloader.
But it just searches and doesn't find anything. I searched by myself, but didn't find the driver anywhere ...
if you are really determined to update ROM, find the thread on ROM 3.14 here on xda forum, I recall seeing guidelines on installing ROM from SD Card
of course it will not solve your sync problem, but still...
Yah ... I wanted to install HSPL2 to be able to do install the ROM from the SD card (at least that's what I understood - that I need that first), but I can't install it, as I already wrote.
I GOT IT!!!
Finally.. in a forum somewhere in a forgotten corner of the internet.. someone gave an advice to uninstall the windows mobile device center and reinstall it.
After uninstalling, I had some trouble to find it again, but finally got it.
And guess what: it works now.
Windows managed to install the quadcomm driver and I could update my ROM.
Never had such a hard challenge with my HD2.
Thanks everyone who tried to help!
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Can someone tell me in settings>wireless and network do you have USB Settings?
Lenks said:
Can someone tell me in settings>wireless and network do you have USB Settings?
Click to expand...
Click to collapse
Hey!
Nope!
CHEERS!
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
Do you have Samsung Kies ?
Sent from my Awesome Ace with fla.sh ROM and TAPATALK
I have KIES, i try on my PC, and on my Laptop. Reinstall KIES and drivers, nothing help. I read on google and i think is a cable problem, (same problem whit other android phones, like HTC) i purchase new one but will came after few weeks, so i need to wait If anyone have problem like this, or have any idea please share...
Typ *#7284# in your dialer.
And set both to pda.
Worked for my galaxy 3!
i think it came different menu... if someone hace other code...
The menu is named: phoneutil
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
i had the same problem. I took a backup of the rom with cwm and restored it and it was working fine, dunno how
Guys you need the Samsung usb drivers ....only then ur pc will recognise the phone ...just google "android 2.3.4 for Samsung galaxy ace androidflip.com ..they share the drivers in the tutorial ...hope I helped ...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Lenks said:
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Click to expand...
Click to collapse
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
async3 said:
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
Click to expand...
Click to collapse
Ok, It got solved yesterday this way:
You do not need to reinstall drivers on PC.
You do not need to reinstall ROM or anything on your phone.
You do not need *# special codes.
You do not need a new cable or change USB port or change your phone for a new one.
It seems to me that somehow (probably for debugging, connecting and disconnecting several times) the phone locks itself in a state where it is unable to connect again through USB although it charges.
So how did I solve it? I executed this actions several times even in different order some times: disabled debugging, disconnected cable, restarted phone, connected cable, (still not recognizing), tryed to USB Theter (even when the option was disabled), reenable debugging.
Out of nothing i noticed the USB icon was there again in my phone and i was able to debug copy files etc again.
I tried disconnecting and conneceting again and it kept working correctly.
I hope this helps someone else with the same problem and probably someone fixes the bug on the OS.
Cheers!