I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
Related
I've read and reread various posts about this. I just want to make sure I have the steps down before I go forward.
What I have now:
Cingular 8525
Rom: 1.34.502.1
Radio version : 1.16
SPL: 1.06
What I would like achieve:
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
1) Downgrade to SPL 1.04 by flashing the 8525 with file RUU_HER_Cingular_1.30.502.1_1.11.00.00_wwe_cws_ship.exe. This is because it matches my CID CWS__001 and it has SPL 1.04. I guess I simply run it without any other preparations. Is this correct?
2) Super CID and simunlock using HTC_Hermes_SIM_Unlock_v2a.zip
3) I choose the ROM RUU_Hermes_CINGULAR_WWE_2.06.502.3_6275_1.33.31.00_108_Ship.exe
4) Use NBExtract to decompress the above ROM to get files OS.nbf and Extrom.nbf file
5) Flash SPL 1.01MFG using mtty.exe. Is this necessary? Can't I flash OS.nbf with SPL1.04?
6) Flash OS.nbf file extracted using mtty.exe
7) Flash extrom.nbf file extracted using mtty.exe
8) Flash radio from file RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe by simply running it. Is this correct?
Am I missing something in the process?
Lastly, Is this the best COMBINATION of ROM, radio, and ext ROM? And how does RUU_Hermes_CINGULAR_WWE_2[1].06.502.3_6275_1.33.31.00_108_Ship compared to 2.05?
Thanks for any input.
5)
anubus12 said:
...
1) Downgrade to SPL 1.04 by flashing the 8525 with file RUU_HER_Cingular_1.30.502.1_1.11.00.00_wwe_cws_ship.exe. This is because it matches my CID CWS__001 and it has SPL 1.04. I guess I simply run it without any other preparations. Is this correct?
Click to expand...
Click to collapse
I guess there isnt really any need to do that, if you flash SPL 1.01MFG to it then theres no need to do this step.
anubus12 said:
...
2) Super CID and simunlock using HTC_Hermes_SIM_Unlock_v2a.zip
Click to expand...
Click to collapse
I would use the unlocker v3 (i suspect you meant v3 anyway)
anubus12 said:
...
3) I choose the ROM RUU_Hermes_CINGULAR_WWE_2.06.502.3_6275_1.33.31.00_108_Ship.exe
Click to expand...
Click to collapse
The ROM you choose is entirely up to you so yes this should be ok
anubus12 said:
...
4) Use NBExtract to decompress the above ROM to get files OS.nbf and Extrom.nbf file
Click to expand...
Click to collapse
Yep goes without saying ;-)
anubus12 said:
...
5) Flash SPL 1.01MFG using mtty.exe. Is this necessary? Can't I flash OS.nbf with SPL1.04?
Click to expand...
Click to collapse
IF you are doing this then it would be the FIRST step you do
anubus12 said:
...
6) Flash OS.nbf file extracted using mtty.exe
7) Flash extrom.nbf file extracted using mtty.exe
Click to expand...
Click to collapse
Still....yes no problem.
anubus12 said:
...
8) Flash radio from file RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe by simply running it. Is this correct?
Click to expand...
Click to collapse
This part is beyond what i did, my process was that i upgraded to radio ROM 1.27.00.00 using the signed .exe because i originally had SPL 1.09.
anubus12 said:
...
Am I missing something in the process?
Click to expand...
Click to collapse
You seem to have it figured out, but dont go on what i say here, wait for it to be verified by more than just me
My process (having already got superCID and unlocked a while ago) was to upgrade to radio 1.27.00.00 before anything else, then to flash SPL 1.01MFG using mtty, then flash the OS.nb file from the ROM i chose, then to flash ExtROM.nb (again from the ROM i chose). By using radio 1.27 you will have radio loader 107 which is recommended still.
Once some other people have looked over what you posted then you should go ahead (if they all give the "all clear" )
You combination of rom and radio is a good idea (the ROM and ExtROM is entirely up to you but the radio is the highest that doesnt have loader 108?)
It's even easier than that;
get my Custom RUU kit and you can skip the reflash;
take the 3.3AKU and extract the RUU_Signed.
extract the RUU signed with NBHExtract or my GUI tool (make sure it's all in the same directory) then you can create a NEW RUU with SPL 1.04, whatever radio you like (if you want a new one) and the 3.3 OS AKU.
remember: if you do it this way, you can have whatever components you want; ExtROM, OS, mix and match anything.
however... if you don't think you can manage doing this, tell me what you want and I'll happily assemble it for you
1. SuperCid and Unlock with POF VERSION 3
Website:
http://pof.eslack.org/hermes-unlocker/
Install Instructions:
Easy auto-install Instructions:
Unzip unlocker and run AUTO_Unlock_v3.bat
If you don't want to install automatically, or for some reason the process doesn't work for you, here are the manual instructions:
Transfer SSPL/SSPL-HERM.exe to your phone and run it
Tri-color screen will appear
Disable activesync (file -> connection settings -> uncheck "allow USB connections")
Connect your phone to your computer using the USB lead.
Run RUU/ROMUpgradeUt.exe
Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
Allow your phone to reboot.
Transfer HERM_Unlock_v3.exe program to your phone and run it
Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
Click "Unlock!" and wait until process finishes.
When done, turn off your phone for 10 seconds and reboot after that.
2. Then Run this cooked ROM (Cooked w/Olipro software)
http://uploadingit.com/files/8194/RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
I think radio 1.33 or 1.34 is better then 1.27. I do not see a difference between 1.33 or 1.34 though.
You pretty much had the process but this will be easier for you.
just to point out; SuperCID and Unlock (unless using a different SIM) is unnecessary and *could* potentially invalidate your warranty.
SuperCID is pretty much redundant nowadays with the new SSPL; the only real advantage to having your device SuperCID is if there isn't a ROM for your CID with old version stuff to revert to.
Thank you for all the replies! I appreciate it.
@mrvanx and wpbear
The reason stated using unlocker v2a was because, from what I understand, if I use v3 it would put a patched 1.08 Radio BL (which I thought we want to avoid). Which means that I won't be able to "downgrade" to a lower version radio. Am I wrong?
@mrvanx
You said that I didn't need to downgrade to 1.04 BL because I could use 1.01MFG. I thought that I couldn't do that with 1.06 or higher. I had to downgrade to 1.04 first.
@wpbear
I assume in order to use your custom cooked ROM, I have to SuperCID right?
@Olipro
Thanks for the offer of cooking up a ROM. I think wpbear's ROM has everything I wanted. But again, if I wanted to use your ROM, I would have to SuperCID? Also, where can I get your GUI?
But what is the best combination right now of OS, Ext, and radio?
Thanks again!
anubus12 said:
Also, where can I get your GUI?
Click to expand...
Click to collapse
Nevermind, I found your GUI. Thanks!
The only advantage of real SuperCID is being able to write to extrom once you've unlocked it.
You did a real nice v1.0 upgrade set of instructions btw They were perfect. In fact that's exactly what I did to upgrade my 8525.
However, the recent explosion of NBHtools that take advantage of Des' SSPL technique (nicely done Olipro btw )have opened up much better ways to accomplish this now.
anubus12 said:
Thank you for all the replies! I appreciate it.
@Olipro
Thanks for the offer of cooking up a ROM. I think wpbear's ROM has everything I wanted. But again, if I wanted to use your ROM, I would have to SuperCID? Also, where can I get your GUI?
But what is the best combination right now of OS, Ext, and radio?
Thanks again!
Click to expand...
Click to collapse
no, you do *not* have to SuperCID at all with my RUU since it uses SSPL.
if you use the custom RUU (and you can tell, it has the XDA Dev logo on) then your device does not need to be SuperCID
anubus12 said:
@mrvanx
You said that I didn't need to downgrade to 1.04 BL because I could use 1.01MFG. I thought that I couldn't do that with 1.06 or higher. I had to downgrade to 1.04 first.
Click to expand...
Click to collapse
You SHOULD be ok, i downgraded to SPL 1.01MFG from version 1.09 by just flashing it using mtty.exe. I followed the instructions on the How to Flash AKU3.3 Update thread (the first post) to get my new ROM onto my device. I used the HTC AKU3.3 Test ROM and it worked just great.
anubus12 said:
Thank you for all the replies! I appreciate it.
@mrvanx and wpbear
The reason stated using unlocker v2a was because, from what I understand, if I use v3 it would put a patched 1.08 Radio BL (which I thought we want to avoid). Which means that I won't be able to "downgrade" to a lower version radio. Am I wrong?
Click to expand...
Click to collapse
I do not think Pof unlocker put BL 108 on your device, but it doesnt matter anymore since SSPL bypass this and you can now still do radio only changes.
anubus12 said:
@wpbear
I assume in order to use your custom cooked ROM, I have to SuperCID right?
Click to expand...
Click to collapse
No, the bootloader bypasses this now, but as someone else pointed out, if you want to change your Ext_ROM with the hack in the Wiki later, you will need to SuperCID still.
anubus12 said:
But what is the best combination right now of OS, Ext, and radio?
Click to expand...
Click to collapse
OS/Ext ROM: 2.06
Radio 1.34 or 1.27
wpbear said:
Then Run this cooked ROM (Cooked w/Olipro software)
http://uploadingit.com/files/8194/RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
Click to expand...
Click to collapse
@wpbear
I used the cooked ROM RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip for the upgrade. One question, I have SPL 1.06 before upgrading. Since the cooked ROM has 1.04 in it, I thought it would downgrade to 1.04. Instead, the SPL did not change. Why?
Same result, same question.
Why?
Where can I download this Rom?
Where can I download this Rom?
Download link doesn't work....
anubus12 said:
@wpbear
I used the cooked ROM RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip for the upgrade. One question, I have SPL 1.06 before upgrading. Since the cooked ROM has 1.04 in it, I thought it would downgrade to 1.04. Instead, the SPL did not change. Why?
Click to expand...
Click to collapse
Are you SuperCID with POf unlocker?
SuperCID/unlock yes. POF no.
Wiki and numberous posts indicate if the unit is SuperCID, it is SuperCID period however there is a v2 v2a and v3.
Is there more to SuperCID than just SuperCID?
Sometimes it sticks and sometimes it does not?
Can v3 be run over top of an existing SuperCID/unlocked unit without risk?
True you are either SuperCID or not, but we have seen people loose SuperCID for no apparent reason. Use mtty and check if you are still SuperCID.
Still superCID, still 1.06.
rvc said:
Still superCID, still 1.06.
Click to expand...
Click to collapse
once you have superCID you can downgrade your bootloader by this http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
I have got the Hermes
ipl:1.01 spl:1.06
I have got the olipro's customruu
I have got the WM6 custel rom.
I only want to flash OS.
Steps:
1. put the customruu and nbh(only OS) in the folder
2. Flash the rom using SSPL option
Coz i dont want to change the SPL version, and i think flashing only OS will not brick my device.
Plz confirm this steps.
AND if ill flash the hardsplv7 will i be able to go back to spl 1.06and how? Please tell.
You can return to SPL 1.06 But i wouldnt recommend it, 1.06 is also known as 'the brick maker'. LOL
Seriously flash HardSPL v7 BEFORE you try ANYTHING else.
mrvanx i have read your guide, its awesome.
But if at all i need it for warranty reasons, can i get it back(IPL and SPL).
Thanks
YES, relax dude.
get flashing
Thanks really appreciate your help.
And to say another thing my company (imate) hasn't released any official ROM for my phone, i have checked the wiki there are roms similar from which i can extract the IPL and SPL and OS which i will need maybe in future.
And i have read that to change the IPL and SPL i need to make a .nbh containing only IPL and SPL and flash it using SSPL option of custom ruu, am I right on this.
Thanks
Yes the procedure is:
Split the .nbh (from an imate ROM...or ANY with IPL and SPL that you want)
into the component .nb files using duttys NBH tool (v1.1 i think).
Then rebuild a new .nbh using ONLY the IPL and SPL bits.
Then flash it with customRUU and (yes correct) select the force SSPL option.
Thank you SOOOOOOOOOOOOO much i think you have helped me alot.
Thanks again, for being so freindly.
I just download the latest u1000 27.07.07 WM6 rom upgrade and extract all the files from the NBH and there are 9 different .nb
1. Windows.nb
2. primary splash.nb
3. secondary splash.nb
4. ATHENA_IPL.nb
5. G4IPL.nb
6. ExtendedRom
7. radio.nb
8. SIRFBootLoader
9. SPL
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
@ rom cookers i just used the romkoch tool to dump the nbh and rebuild it with all the .nbs i.e radio , extended rom, splash screens, windows .nb and it creates the RUU_signed which looks ok without no problems. i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
duttythroy said:
i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
Click to expand...
Click to collapse
I thought you were the "real Dutty"! Why did.'t you say so when you were given the standing ovation upon buying your Athena and joining in here
never really gave notice
victoradjei said:
I thought you were the "real Dutty"! Why did.'t you say so when you were given the standing ovation upon buying your Athena and joining in here
Click to expand...
Click to collapse
hi mate never really gave notice as my name mention dutty as well. sorry for the misunderstanding.
duttythroy said:
hi mate never really gave notice as my name mention dutty as well. sorry for the misunderstanding.
Click to expand...
Click to collapse
Base on you signature, it looks like you flashed the ROM that came out late last night early this morning. Are there anything good or bad on the new ROM?
duttythroy said:
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
Click to expand...
Click to collapse
no, it will not be overwritten.
duttythroy said:
I just download the latest u1000 27.07.07 WM6 rom upgrade and extract all the files from the NBH and there are 9 different .nb
1. Windows.nb
2. primary splash.nb
3. secondary splash.nb
4. ATHENA_IPL.nb
5. G4IPL.nb
6. ExtendedRom
7. radio.nb
8. SIRFBootLoader
9. SPL
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
@ rom cookers i just used the romkoch tool to dump the nbh and rebuild it with all the .nbs i.e radio , extended rom, splash screens, windows .nb and it creates the RUU_signed which looks ok without no problems. i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
Click to expand...
Click to collapse
yep, I am curious about the other files myself. I dump the NBH using Dutty's NBH tool (1.1) and created a new NBH with the same tool with just the Extended ROM and the Windows.nb. It looks okay, however I have not flashed it yet.
lpsi2000 said:
yep, I am curious about the other files myself. I dump the NBH using Dutty's NBH tool (1.1) and created a new NBH with the same tool with just the Extended ROM and the Windows.nb. It looks okay, however I have not flashed it yet.
Click to expand...
Click to collapse
1) just a question, should be possible to flash the windows.nb from hermes, for example, instead the windows from htc?
2) I know how to extract but not sure about how to put together all the files? can you provide some guidance on what tools use for it and how it works, please?
thanks.
beginner said:
1) just a question, should be possible to flash the windows.nb from hermes, for example, instead the windows from htc?
2) I know how to extract but not sure about how to put together all the files? can you provide some guidance on what tools use for it and how it works, please?
thanks.
Click to expand...
Click to collapse
AT THE MOMENT ITS TOO RISKY TO COMPILE AND FLASHED BUT YOU CANT USED A HERMES .NB AND FLASHED TO YOU ATENA AS YOU WILL END UP WITH AN EXPENSIVE BRICK.
you can use duttys good nbh tool to extract contents from .nbh and then compile the rom radio but its not advise even if your device is hardspl as yet. possible soon or at your own risk
duttythroy said:
AT THE MOMENT ITS TOO RISKY TO COMPILE AND FLASHED BUT YOU CANT USED A HERMES .NB AND FLASHED TO YOU ATENA AS YOU WILL END UP WITH AN EXPENSIVE BRICK.
you can use duttys good nbh tool to extract contents from .nbh and then compile the rom radio but its not advise even if your device is hardspl as yet. possible soon or at your own risk
Click to expand...
Click to collapse
Agreed, still work in progress
Hi!
I'am a noob in this stuff and my english is also not to good
I have to give my TYTN to warranty service. and I have to downgrade my SPL to original version (1.11), because I'm worried that they will not accept my warranty.
Please help me to downgrade to SPL 1.11 from HARD SPL
I've got original HTC rom 2.11 with hard SPL
I've found some instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
But here is only downgrade to 1.06 or 1.04. Is it possible to downgrade to 1.11?
Thank You very much for Your help!
pbalsam said:
Hi!
I'am a noob in this stuff and my english is also not to good
I have to give my TYTN to warranty service. and I have to downgrade my SPL to original version (1.11), because I'm worried that they will not accept my warranty.
Please help me to downgrade to SPL 1.11 from HARD SPL
I've got original HTC rom 2.11 with hard SPL
I've found some instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
But here is only downgrade to 1.06 or 1.04. Is it possible to downgrade to 1.11?
Thank You very much for Your help!
Click to expand...
Click to collapse
Yes. It is possible and easy.
Get a copy of the SPL 1.11 and use it instead of the 1.06 or 1.04 mentioned in MrVanx's guides.
Now, assuming that the reason you wrote this is that you do not HAVE a copy of it, then I will tell you how to get it.
Download a full ROM from the wiki LOOK HERE that has many shipped ROMs (including some with SPL1.11 LIKE THIS ONE )
Use WinRAR (or equivalent) to unrar the EXE file of the ROM you just downloaded
You will get an .NBH file and an RUU file.
Use dutty's good nbh tool to decompile the .NBH file.
You will get many .NB files, including one called SPL.NB
Use dutty's good nbh tool to build an .NBH file from the SPL.NB file.
Now you have an SPL1.11 .NBH file that can be used in place of the 1.06 and 1.04 files referenced by MrVanx.
Maybe a request is in order
This seems to be a recurring post. Apparently many folks would like to go back to an older SPL version (likely for warranty reasons). How about somebody build an AT&T or better yet Cingular SPL that came shipped with the 8525s branded by Cingular. Mine ran WM5, but I haven't had any luck finding that ROM online. I suppose the warranty would be covered with WM6, but I would no doubt need the orignal SPL if I want anything covered. So I guess, all we would need is a Wrapper bundled with the .SP file that would restore the orignal SPL. We could load an original AT&T / Cingular ROM, followed by installing the SPL.
That might cut back on some of these posts asking how to...
Well, probably not, but it would be a nice sticky.
Thanks for help.
I've downloaded all the stuff. But the ROM is RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe
It's exe file and i dont know how to get Ruu...nbh file.Could You help me?
Another option, assuming you have 2.10 olipro spl now- use mrvanx guide to downgrade to 1.10 oli, then reflash factory rom from htc america site, this will also flash the bootloader to the most current, spl 1.11 worked for me....
pbalsam said:
Thanks for help.
I've downloaded all the stuff. But the ROM is RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe
It's exe file and i dont know how to get Ruu...nbh file.Could You help me?
Click to expand...
Click to collapse
Use WinRAR (or equivalent) to unrar the EXE file of the ROM you just downloaded
You will get an .NBH file and an RUU file.
with the new CustomRUU, if you select the "Unsafe SSPL" you can flash any SPL you wish.
This thread is a supplement to the HardSPL thread, in the unfortunate case that you need to return your phone to Stock specifications (including Stock SPL), and the SPL that came with your phone didn't happen to be the 1.90 version included in the HardSPL thread. I've included the few that I have here, and as I come across others, I'll add them to this post. If anyone else has other versions, feel free to post them here as well.
Each zip file includes the Stock SPL nbh file ONLY. In order to restore Stock SPL, you WILL need the HardSPL package from this thread.
SPL 1.95 - Extracted from AT&T HTC FUZE Stock ROM
SPL 5.05 - Extracted from Official HTC ROM (WWE)
SPL 5.08 - Extracted from AT&T HTC FUZE Test ROM
SPL 5.07 - Extracted from Official HTC ROM - Southeast Asia - Sintel-English
SPL 1.90 (from HardSPL thread) - I added this one just so they're all in the same place.
EDIT: I have tired flashing several of these to my device with no success. It appears there is more that I need to do to extract these SPLs properly. In the meantime, I recommend that you use the 1.90SPL from the HardSPL thread for your warranty purposes. If you would then like to get the stock SPL on your device, re-flashing the stock ROM should accomplish that.
Thanks
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Thanks for compiling this. Sticky time!
Captain_Throwback said:
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Click to expand...
Click to collapse
Yea I have looked at that and I know about having the hard spl. I just don't know how to flash the 6.5 rom. Thanks for your concern though.
StockSPL 1.69
Here is Stock SPL 1.69 from T-Mobile Czech ROM extracted from RUU_signed.nbh with NBHextract.exe a converted with yang back to nbh by following code
Code:
yang -F SPL.nbh -f SPL.nb -t 0x200 -s 64 -d RAPH***** -c 11111111 -v 1.00.000 -l WWE
Some Moderator can move it to first post ;-)
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
chukalov said:
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
Click to expand...
Click to collapse
When you flash the stock Fuze ROM, your radio will also be flashed. Be sure to follow the instructions in the Hard-SPL thread for returning your phone to stock specifications. When you get to the part about flashing back to Stock SPL for warranty purposes, the 1.95 SPL from the OP here is the one you should use (if you purchased your Fuze in the US after it was officially released - that's what mine came with).
Well, lucky me . I kept shaking the phone and my G-sensor works now. It was stuck on one side and would move. I think I will hold off with the return to stock for now, i really dont want to get refurb replacement.
Thanks for the reply.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
custommsp said:
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
Click to expand...
Click to collapse
I'm sure you didn't do anything wrong. I'll look into it. In the meantime, if you just re-flash the Stock ROM after flashing the 1.90 SPL, it should upgrade your SPL to 1.95 (since that's what's included with the Stock ROM). I'll try and figure out what I did wrong.
Great, I'll try it.
ryan_h said:
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Click to expand...
Click to collapse
I couldn't find it. I asked the Captain because he already had the ROm installed and he helped a lot.
SPL extract attempts unsuccessful
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
As you already suggested, it's probably best to flash back to the stock 1.90 SPL following Onlinex's guide after which one should just install the stock ATT Rom or the other stock roms with the latest stock SPL. This worked for me.
Thanks!
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
To your problem: shouldnt you just restore your stock Radio and stock OS before flashing stock SPL ?
arvin2212 said:
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Click to expand...
Click to collapse
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
tvaril said:
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
Click to expand...
Click to collapse
Yes, you should be able to flash the stock SPL 1.90 provided in the HardSPL thread, using the method indicated there, and then re-flash your stock ROM, and it should restore your 1.69 SPL.
Captain_Throwback said:
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
Click to expand...
Click to collapse
i believe you misunderstood his question. he's asking which SPL should he download given that he got his phone in malaysia
i believe that it should be the asia-singtel one. i'm in singapore, and that is the rom that was recently released for our devices. so my guess would be the singtel spl.